Cong Wang [Thu, 31 Aug 2017 14:47:43 +0000 (16:47 +0200)]
wl1251: add a missing spin_lock_init()
wl1251: add a missing spin_lock_init()
This fixes the following kernel warning:
[ 5668.771453] BUG: spinlock bad magic on CPU#0, kworker/u2:3/9745
[ 5668.771850] lock: 0xce63ef20, .magic: 00000000, .owner: <none>/-1,
.owner_cpu: 0
[ 5668.772277] CPU: 0 PID: 9745 Comm: kworker/u2:3 Tainted: G W 4.12.0-03002-gec979a4-dirty #40
[ 5668.772796] Hardware name: Nokia RX-51 board
[ 5668.773071] Workqueue: phy1 wl1251_irq_work
[ 5668.773345] [<c010c9e4>] (unwind_backtrace) from [<c010a274>]
(show_stack+0x10/0x14)
[ 5668.773803] [<c010a274>] (show_stack) from [<c01545a4>]
(do_raw_spin_lock+0x6c/0xa0)
[ 5668.774230] [<c01545a4>] (do_raw_spin_lock) from [<c06ca578>]
(_raw_spin_lock_irqsave+0x10/0x18)
[ 5668.774658] [<c06ca578>] (_raw_spin_lock_irqsave) from [<c048c010>]
(wl1251_op_tx+0x38/0x5c)
[ 5668.775115] [<c048c010>] (wl1251_op_tx) from [<c06a12e8>]
(ieee80211_tx_frags+0x188/0x1c0)
[ 5668.775543] [<c06a12e8>] (ieee80211_tx_frags) from [<c06a138c>]
(__ieee80211_tx+0x6c/0x130)
[ 5668.775970] [<c06a138c>] (__ieee80211_tx) from [<c06a3dbc>]
(ieee80211_tx+0xdc/0x104)
[ 5668.776367] [<c06a3dbc>] (ieee80211_tx) from [<c06a4af0>]
(__ieee80211_subif_start_xmit+0x454/0x8c8)
[ 5668.776824] [<c06a4af0>] (__ieee80211_subif_start_xmit) from
[<c06a4f94>] (ieee80211_subif_start_xmit+0x30/0x2fc)
[ 5668.777343] [<c06a4f94>] (ieee80211_subif_start_xmit) from
[<c0578848>] (dev_hard_start_xmit+0x80/0x118)
...
by adding the missing spin_lock_init().
Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Pavel Machek <pavel@ucw.cz> Cc: stable@kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
Cameron Gutman [Thu, 31 Aug 2017 18:52:20 +0000 (11:52 -0700)]
Input: xpad - fix PowerA init quirk for some gamepad models
The PowerA gamepad initialization quirk worked with the PowerA
wired gamepad I had around (0x24c6:0x543a), but a user reported [0]
that it didn't work for him, even though our gamepads shared the
same vendor and product IDs.
When I initially implemented the PowerA quirk, I wanted to avoid
actually triggering the rumble action during init. My tests showed
that my gamepad would work correctly even if it received a rumble
of 0 intensity, so that's what I went with.
Unfortunately, this apparently isn't true for all models (perhaps
a firmware difference?). This non-working gamepad seems to require
the real magic rumble packet that the Microsoft driver sends, which
actually vibrates the gamepad. To counteract this effect, I still
send the old zero-rumble PowerA quirk packet which cancels the
rumble effect before the motors can spin up enough to vibrate.
Hans de Goede [Tue, 29 Aug 2017 12:08:35 +0000 (14:08 +0200)]
i2c: designware: Round down ACPI provided clk to nearest supported clk
The Lenovo Miix2 8 DSDT contains an i2c clk / bus speed of 1700000 Hz
for one if its devices, which is not supported.
This is the second DSDT to show up with an unsupported clk in a short
time, remove the hardcoded fix for DSDTs with a 1 MiHz clock and simply
always round down the clk to the nearest supported value.
Reported-by: russianneuromancer@ya.ru Fixes: 682c6c2188 ("i2c: designware: Some broken DSTDs use 1MiHz ...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Takashi Iwai [Thu, 31 Aug 2017 12:08:26 +0000 (14:08 +0200)]
Merge tag 'asoc-fix-v4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.13
A couple of fixes, one for a regression in simple-card introduced during
the merge window that was only reported this week and another for a
regression in registration of ACPI GPIOs.
The mm->context.asce field of a new process is not set up correctly
in case of a fork with a 5 level page table.
Add the missing case to init_new_context().
Florian Fainelli [Thu, 31 Aug 2017 00:49:29 +0000 (17:49 -0700)]
Revert "net: phy: Correctly process PHY_HALTED in phy_stop_machine()"
This reverts commit 7ad813f208533cebfcc32d3d7474dc1677d1b09a ("net: phy:
Correctly process PHY_HALTED in phy_stop_machine()") because it is
creating the possibility for a NULL pointer dereference.
David Daney provide the following call trace and diagram of events:
The original motivation for this change originated from Marc Gonzales
indicating that his network driver did not have its adjust_link callback
executing with phydev->link = 0 while he was expecting it.
PHYLIB has never made any such guarantees ever because phy_stop() merely just
tells the workqueue to move into PHY_HALTED state which will happen
asynchronously.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: David Daney <ddaney.cavm@gmail.com> Fixes: 7ad813f20853 ("net: phy: Correctly process PHY_HALTED in phy_stop_machine()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kernels >= 4.8
net/mlx5e: Fix inline header size for small packets
net/mlx5: E-Switch, Unload the representors in the correct order
net/mlx5: Fix arm SRQ command for ISSI version 0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Wed, 30 Aug 2017 19:39:33 +0000 (12:39 -0700)]
net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278
BCM7278 has only 128 entries while BCM7445 has the full 256 entries set,
fix that.
Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 30 Aug 2017 16:29:31 +0000 (09:29 -0700)]
kcm: do not attach PF_KCM sockets to avoid deadlock
syzkaller had no problem to trigger a deadlock, attaching a KCM socket
to another one (or itself). (original syzkaller report was a very
confusing lockdep splat during a sendmsg())
It seems KCM claims to only support TCP, but no enforcement is done,
so we might need to add additional checks.
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 30 Aug 2017 22:28:47 +0000 (15:28 -0700)]
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Dan Williams:
"A single patch removing some structure definitions from a uapi header
file. These payloads are never processed directly by the kernel they
are simply passed through an ioctl as opaque blobs to the ACPI _DSM
(Device Specific Method) interface.
Userspace should not be depending on the kernel to define these
payloads. We will instead provide these definitions via the existing
libndctl (https://github.com/pmem/ndctl) project that has NVDIMM
command helpers and other definitions"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm: clean up command definitions
I went over all qdiscs' init, destroy and reset callbacks and found the
issues fixed in each patch. Mostly they are null pointer dereferences due
to uninitialized timer (qdisc watchdog) or double frees due to ->destroy
cleaning up a second time. There's more information in each patch.
I've tested these by either sending wrong attributes from user-spaces, no
attributes or by simulating memory alloc failure where applicable. Also
tried all of the qdiscs as a default qdisc.
Most of these bugs were present before commit 87b60cfacf9f, I've tried to
include proper fixes tags in each patch.
I haven't included individual patch acks in the set, I'd appreciate it if
you take another look and resend them.
====================
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_tbf: fix two null pointer dereferences on init failure
sch_tbf calls qdisc_watchdog_cancel() in both its ->reset and ->destroy
callbacks but it may fail before the timer is initialized due to missing
options (either not supplied by user-space or set as a default qdisc),
also q->qdisc is used by ->reset and ->destroy so we need it initialized.
Reproduce:
$ sysctl net.core.default_qdisc=tbf
$ ip l set ethX up
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_sfq: fix null pointer dereference on init failure
Currently only a memory allocation failure can lead to this, so let's
initialize the timer first.
Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_netem: avoid null pointer deref on init failure
netem can fail in ->init due to missing options (either not supplied by
user-space or used as a default qdisc) causing a timer->base null
pointer deref in its ->destroy() and ->reset() callbacks.
Reproduce:
$ sysctl net.core.default_qdisc=netem
$ ip l set ethX up
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It is very unlikely to happen but the backlogs memory allocation
could fail and will free q->flows, but then ->destroy() will free
q->flows too. For correctness remove the first free and let ->destroy
clean up.
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_cbq: fix null pointer dereferences on init failure
CBQ can fail on ->init by wrong nl attributes or simply for missing any,
f.e. if it's set as a default qdisc then TCA_OPTIONS (opt) will be NULL
when it is activated. The first thing init does is parse opt but it will
dereference a null pointer if used as a default qdisc, also since init
failure at default qdisc invokes ->reset() which cancels all timers then
we'll also dereference two more null pointers (timer->base) as they were
never initialized.
To reproduce:
$ sysctl net.core.default_qdisc=cbq
$ ip l set ethX up
Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_hfsc: fix null pointer deref and double free on init failure
Depending on where ->init fails we can get a null pointer deref due to
uninitialized hires timer (watchdog) or a double free of the qdisc hash
because it is already freed by ->destroy().
Fixes: 8d5537387505 ("net/sched/hfsc: allocate tcf block for hfsc root class") Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sch_hhf: fix null pointer dereference on init failure
If sch_hhf fails in its ->init() function (either due to wrong
user-space arguments as below or memory alloc failure of hh_flows) it
will do a null pointer deref of q->hh_flows in its ->destroy() function.
To reproduce the crash:
$ tc qdisc add dev eth0 root hhf quantum 2000000 non_hh_weight 10000000
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The below commit added a call to ->destroy() on init failure, but multiq
still frees ->queues on error in init, but ->queues is also freed by
->destroy() thus we get double free and corrupted memory.
Very easy to reproduce (eth0 not multiqueue):
$ tc qdisc add dev eth0 root multiq
RTNETLINK answers: Operation not supported
$ ip l add dumdum type dummy
(crash)
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: f07d1501292b ("multiq: Further multiqueue cleanup") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The commit below added a call to the ->destroy() callback for all qdiscs
which failed in their ->init(), but some were not prepared for such
change and can't handle partially initialized qdisc. HTB is one of them
and if any error occurs before the qdisc watchdog timer and qdisc work are
initialized then we can hit either a null ptr deref (timer->base) when
canceling in ->destroy or lockdep error info about trying to register
a non-static key and a stack dump. So to fix these two move the watchdog
timer and workqueue init before anything that can err out.
To reproduce userspace needs to send broken htb qdisc create request,
tested with a modified tc (q_htb.c).
Note that probably this bug goes further back because the default qdisc
handling always calls ->destroy on init failure too.
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation") Fixes: 0fbbeb1ba43b ("[PKT_SCHED]: Fix missing qdisc_destroy() in qdisc_create_dflt()") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 30 Aug 2017 22:03:00 +0000 (15:03 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes: a NULL deref in qedf, an off by one in sg and a fix
to IPR to prevent an error on initialisation"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedf: Fix a potential NULL pointer dereference
scsi: sg: off by one in sg_ioctl()
scsi: ipr: Set no_report_opcodes for RAID arrays
Linus Torvalds [Wed, 30 Aug 2017 21:54:24 +0000 (14:54 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha update from Matt Turner:
"A few fixes and wires up some additional syscalls."
[ Some of this is technically not really rc7 material, but it's alpha,
and it all looks safe anyway. Matt explains: "My alpha has been
offline, hence the very late-in-cycle pull request" and hasn't caused
problems before, so he gets to slide. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: uapi: Add support for __SANE_USERSPACE_TYPES__
alpha: Define ioremap_wc
alpha: Fix section mismatches
alpha: support R_ALPHA_REFLONG relocations for module loading
alpha: Fix typo in ev6-copy_user.S
alpha: Package string routines together
alpha: Update for new syscalls
alpha: Fix build error without CONFIG_VGA_HOSE.
Steve French [Sun, 27 Aug 2017 21:56:08 +0000 (16:56 -0500)]
CIFS: remove endian related sparse warning
Recent patch had an endian warning ie
cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()
Signed-off-by: Steve French <smfrench@gmail.com> CC: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Pavel Shilovsky [Thu, 24 Aug 2017 22:16:40 +0000 (15:16 -0700)]
CIFS: Fix maximum SMB2 header size
Currently the maximum size of SMB2/3 header is set incorrectly which
leads to hanging of directory listing operations on encrypted SMB3
connections. Fix this by setting the maximum size to 170 bytes that
is calculated as RFC1002 length field size (4) + transform header
size (52) + SMB2 header size (64) + create response size (56).
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Tal Gilboa [Mon, 28 Aug 2017 15:45:08 +0000 (18:45 +0300)]
net/mlx5e: Fix CQ moderation mode not set properly
cq_period_mode assignment was mistakenly removed so it was always set to "0",
which is EQE based moderation, regardless of the device CAPs and
requested value in ethtool.
Fixes: 6a9764efb255 ("net/mlx5e: Isolate open_channels from priv->params") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Shahar Klein [Tue, 1 Aug 2017 12:29:55 +0000 (15:29 +0300)]
net/mlx5: E-Switch, Unload the representors in the correct order
When changing from switchdev to legacy mode, all the representor port
devices (uplink nic and reps) are cleaned up. Part of this cleaning
process is removing the neigh entries and the hash table containing them.
However, a representor neigh entry might be linked to the uplink port
hash table and if the uplink nic is cleaned first the cleaning of the
representor will end up in null deref.
Fix that by unloading the representors in the opposite order of load.
Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Shahar Klein <shahark@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently if vxlan tunnel ipv6 src isn't supplied the driver fails to
resolve it as part of the route lookup. The resulting encap header
is left with a zeroed out ipv6 src address so the packets are sent
with this src ip.
Use an appropriate route lookup API that also resolves the source
ipv6 address if it's not supplied.
Fixes: ce99f6b97fcd ('net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Inbar Karmy [Mon, 14 Aug 2017 13:12:16 +0000 (16:12 +0300)]
net/mlx5e: Don't override user RSS upon set channels
Currently, increasing the number of combined channels is changing
the RSS spread to use the new created channels.
Prevent the RSS spread change in case the user explicitly declare it,
to avoid overriding user configuration.
Tested:
when RSS default:
# ethtool -L ens8 combined 4
RSS spread will change and point to 4 channels.
# ethtool -X ens8 equal 4
# ethtool -L ens8 combined 6
RSS will not change after increasing the number of the channels.
Fixes: 8bf368620486 ('ethtool: ensure channel counts are within bounds during SCHANNELS') Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eran Ben Elisha [Wed, 16 Aug 2017 11:37:11 +0000 (14:37 +0300)]
net/mlx5e: Fix dangling page pointer on DMA mapping error
Function mlx5e_dealloc_rx_wqe is using page pointer value as an
indication to valid DMA mapping. In case that the mapping failed, we
released the page but kept the dangling pointer. Store the page pointer
only after the DMA mapping passed to avoid invalid page DMA unmap.
Fixes: bc77b240b3c5 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Tue, 8 Aug 2017 18:17:00 +0000 (13:17 -0500)]
net/mlx5: Skip mlx5_unload_one if mlx5_load_one fails
There is an issue where the firmware fails during mlx5_load_one,
the health_care timer detects the issue and schedules a health_care call.
Then the mlx5_load_one detects the issue, cleans up and quits. Then
the health_care starts and calls mlx5_unload_one to clean up the resources
that no longer exist and causes kernel panic.
The root cause is that the bit MLX5_INTERFACE_STATE_DOWN is not set
after mlx5_load_one fails. The solution is removing the bit
MLX5_INTERFACE_STATE_DOWN and quit mlx5_unload_one if the
bit MLX5_INTERFACE_STATE_UP is not set. The bit MLX5_INTERFACE_STATE_DOWN
is redundant and we can use MLX5_INTERFACE_STATE_UP instead.
Support for ISSI version 0 was recently broken as the arm_srq_cmd
command, which is used only for ISSI version 0, was given the opcode
for ISSI version 1 instead of ISSI version 0.
Change arm_srq_cmd to use the correct command opcode for ISSI version
0.
net/mlx5e: Fix DCB_CAP_ATTR_DCBX capability for DCBNL getcap.
Current code doesn't report DCB_CAP_DCBX_HOST capability when query
through getcap. User space lldptool expects capability to have HOST mode
set when it wants to configure DCBX CEE mode. In absence of HOST mode
capability, lldptool fails to switch to CEE mode.
This fix returns DCB_CAP_DCBX_HOST capability when port's DCBX
controlled mode is under software control.
net/mlx5e: Check for qos capability in dcbnl_initialize
qos capability is the master capability bit that determines
if the DCBX is supported for the PCI function. If this bit is off,
driver cannot run any dcbx code.
Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Lucas Stach [Tue, 29 Aug 2017 15:51:22 +0000 (17:51 +0200)]
ASoC: simple_card_utils: fix fallback when "label" property isn't present
snd_soc_of_parse_card_name() doesn't return an error if the requested
property isn't present, but silently fails to fill the card name. This can
not be changed, as it is a backwards compatibility measure itself.
We can not rely on the return value of this function alone, but must check
if the card name has been filled sucessfully when deciding to skip the
fallback path, which is in place for existing users.
Fixes: dedfaa1eedc7 (ASoC: simple-card-utils: enable "label" on
asoc_simple_card_parse_card_name) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
Sekhar Nori [Wed, 30 Aug 2017 08:07:13 +0000 (13:37 +0530)]
net: ti: cpsw-common: dont print error if ti_cm_get_macid() fails
It is quite common for ti_cm_get_macid() to fail on some of the
platforms it is invoked on. They include any platform where
mac address is not part of SoC register space.
On these platforms, mac address is read and populated in
device-tree by bootloader. An example is TI DA850.
Downgrade the severity of message to "information", so it does
not spam logs when 'quiet' boot is desired.
Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jens Axboe [Wed, 30 Aug 2017 15:10:09 +0000 (09:10 -0600)]
Merge branch 'nvme-4.13' of git://git.infradead.org/nvme into for-linus
Pull NVMe fixes from Christoph:
"Three more fixes for 4.13 below:
- fix the incorrect bit for the doorbell buffer features (Changpeng Liu)
- always use a 4k MR page size for RDMA, to not get in trouble with
offset in non-4k page size systems (no-op for x86) (Max Gurtovoy)
- and a fix for the new nvme host memory buffer support to keep the
descriptor list DMA mapped when the buffer is enabled (me)"
Thomas Petazzoni [Wed, 30 Aug 2017 10:15:37 +0000 (12:15 +0200)]
arm64: dts: marvell: fix number of GPIOs in Armada AP806 description
The Armada AP806 has 20 pins, and therefore 20 GPIOs (from 0 to 19
included) and not 19 pins. Therefore, we fix the Device Tree
description for the GPIO controller.
Fixes: 63dac0f4924b9 ("arm64: dts: marvell: add gpio support for Armada 7K/8K") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Takashi Iwai [Wed, 30 Aug 2017 12:50:07 +0000 (14:50 +0200)]
ALSA: pcm: Fix power lock unbalance via OSS emulation
PCM OSS emulation issues the drain ioctl without power lock. It used
to work in the earlier kernels as the power lock was taken inside
snd_pcm_drain() itself. But since 68b4acd32249 ("ALSA: pcm: Apply
power lock globally to common ioctls"), the power lock is taken
outside the function. Due to that change, the call via OSS emulation
leads to the unbalanced power lock, thus it deadlocks.
As a quick fix, just take the power lock before snd_pcm_drain() call
for OSS emulation path. A better cleanup will follow later.
Fixes: 68b4acd32249 ("ALSA: pcm: Apply power lock globally to common ioctls") Reported-and-tested-by: Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Changpeng Liu [Thu, 31 Aug 2017 03:22:49 +0000 (11:22 +0800)]
nvme: fix the definition of the doorbell buffer config support bit
NVMe 1.3 specification defines the Optional Admin Command Support feature
flags, bit 8 set to '1' then the controller supports the Doorbell Buffer
Config command. Bit 7 is used for Virtualization Mangement command.
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: f9f38e33 ("nvme: improve performance for virtual NVMe devices") Cc: stable@vger.kernel.org
nvme-pci: use dma memory for the host memory buffer descriptors
The NVMe 1.3 specification says in section 5.21.1.13:
"After a successful completion of a Set Features enabling the host memory
buffer, the host shall not write to the associated host memory region,
buffer size, or descriptor list until the host memory buffer has been
disabled."
While this doesn't state that the descriptor list must remain accessible
to the device it certainly implies it must remaing readable by the device.
So switch to a dma coherent allocation for the descriptor list just to be
safe - it's not like the cost for it matters compared to the actual
memory buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Fixes: 87ad72a59a38 ("nvme-pci: implement host memory buffer support")
Max Gurtovoy [Mon, 28 Aug 2017 09:52:27 +0000 (12:52 +0300)]
nvme-rdma: default MR page size to 4k
Due to various page sizes in the system (IOMMU/device/kernel), we
set the fabrics controller page size to 4k and block layer boundaries
accordinglly. In architectures that uses different kernel page size
we'll have a mismatch to the MR page size that may cause a mapping error.
Update the MR page size to correspond to the core ctrl settings.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
Zhoujie Wu [Mon, 21 Aug 2017 18:02:09 +0000 (11:02 -0700)]
mmc: sdhci-xenon: add set_power callback
Xenon sdh controller requests proper SD bus voltage select
bits programmed even with vmmc power supply. Any reserved
value(100b-000b) programmed in this field will lead to controller
ignore SD bus power bit and keep its value at zero.
Add set_power callback to handle this.
James Hogan [Sun, 13 Aug 2017 04:36:09 +0000 (21:36 -0700)]
irqchip: mips-gic: SYNC after enabling GIC region
A SYNC is required between enabling the GIC region and actually trying
to use it, even if the first access is a read, otherwise its possible
depending on the timing (and in my case depending on the precise
alignment of certain kernel code) to hit CM bus errors on that first
access.
Add the SYNC straight after setting the GIC base.
[paul.burton@imgtec.com:
Changes later in this series increase our likelihood of hitting this
by reducing the amount of code that runs between enabling the GIC &
accessing it.]
Fixes: a7057270c280 ("irqchip: mips-gic: Add device-tree support") Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.19.x-
Patchwork: https://patchwork.linux-mips.org/patch/17019/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Adrian Hunter [Fri, 25 Aug 2017 12:43:45 +0000 (15:43 +0300)]
mmc: block: Fix block status codes
Commit 2a842acab109 ("block: introduce new block status code type") changed
the error type but not in patches merged through the mmc tree, like
commit 0493f6fe5bde ("mmc: block: Move boot partition locking into a driver
op"). Fix one error code that is incorrect and also use BLK_STS_OK in
preference to 0.
Fixes: 17ece345a042 ("Merge tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Olof Johansson [Wed, 30 Aug 2017 05:39:18 +0000 (22:39 -0700)]
Merge tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.13, take 3
This is a revert of the EMAC bindings. The discussion has not settled down
yet on a proper representation of the PHY, and therefore we cannot commit
to a binding yet
The phy is connected at early stage of probe but not properly
disconnected if error occurs. This patch fixes the issue.
Also changing the return type of xgene_enet_check_phy_handle(),
since this function always returns success.
Signed-off-by: Quan Nguyen <qnguyen@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 29 Aug 2017 19:15:16 +0000 (22:15 +0300)]
nfp: double free on error in probe
Both the nfp_net_pf_app_start() and the nfp_net_pci_probe() functions
call nfp_net_pf_app_stop_ctrl(pf) so there is a double free. The free
should be done from the probe function because it's allocated there so
I have removed the call from nfp_net_pf_app_start().
Fixes: 02082701b974 ("nfp: create control vNICs and wire up rx/tx") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:13 +0000 (21:52 +0300)]
net:ethernet:aquantia: Show info message if bad firmware version detected.
We should inform user about wrong firmware version
by printing message in dmesg.
Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer") Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Mon, 28 Aug 2017 18:52:12 +0000 (21:52 +0300)]
net:ethernet:aquantia: Fix for multicast filter handling.
Since the HW supports up to 32 multicast filters we should
track count of multicast filters to avoid overflow.
If we attempt to add >32 multicast filter - just set NETIF_ALLMULTI flag
instead.
Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Igor Russkikh <Igor.Russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:11 +0000 (21:52 +0300)]
net:ethernet:aquantia: Fix for incorrect speed index.
The driver choose the optimal interrupt throttling settings depends
of current link speed.
Due this bug link_status field from aq_hw is never updated and as result
always used same interrupt throttling values.
Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer") Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:10 +0000 (21:52 +0300)]
net:ethernet:aquantia: Workaround for HW checksum bug.
The hardware has the HW Checksum Offload bug when small
TCP patckets (with length <= 60 bytes) has wrong "checksum valid" bit.
The solution is - ignore checksum valid bit for small packets
(with length <= 60 bytes) and mark this as CHECKSUM_NONE to allow
network stack recalculate checksum itself.
Fixes: ccf9a5ed14be ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:09 +0000 (21:52 +0300)]
net:ethernet:aquantia: Fix for number of RSS queues.
The number of RSS queues should be not more than numbers of CPU.
Its does not make sense to increase perfomance, and also cause problems on
some motherboards.
Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Belous [Mon, 28 Aug 2017 18:52:08 +0000 (21:52 +0300)]
net:ethernet:aquantia: Extra spinlocks removed.
This patch removes datapath spinlocks which does not perform any
useful work.
Fixes: 6e70637f9f1e ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Pavel Belous <Pavel.Belous@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Mon, 28 Aug 2017 18:29:41 +0000 (14:29 -0400)]
packet: Don't write vnet header beyond end of buffer
... which may happen with certain values of tp_reserve and maclen.
Fixes: 58d19b19cd99 ("packet: vnet_hdr support for tpacket_rcv") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
For a bond slave device as a tipc bearer, the dev represents the bond
interface and orig_dev represents the slave in tipc_l2_rcv_msg().
Since we decode the tipc_ptr from bonding device (dev), we fail to
find the bearer and thus tipc links are not established.
In this commit, we register the tipc protocol callback per device and
look for tipc bearer from both the devices.
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sinclair Yeh [Tue, 29 Aug 2017 16:55:09 +0000 (18:55 +0200)]
drm/vmwgfx: Fix F26 Wayland screen update issue
vmwgfx currently cannot support non-blocking commit because when
vmw_*_crtc_page_flip is called, drm_atomic_nonblocking_commit()
schedules the update on a thread. This means vmw_*_crtc_page_flip
cannot rely on the new surface being bound before the subsequent
dirty and flush operations happen.
Cc: <stable@vger.kernel.org> # 4.12.x Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Stephen Douthit [Mon, 7 Aug 2017 21:11:00 +0000 (17:11 -0400)]
i2c: ismt: Return EMSGSIZE for block reads with bogus length
Compare the number of bytes actually seen on the wire to the byte
count field returned by the slave device.
Previously we just overwrote the byte count returned by the slave
with the real byte count and let the caller figure out if the
message was sane.
Signed-off-by: Stephen Douthit <stephend@adiengineering.com> Tested-by: Dan Priamo <danp@adiengineering.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
Stephen Douthit [Mon, 7 Aug 2017 21:10:59 +0000 (17:10 -0400)]
i2c: ismt: Don't duplicate the receive length for block reads
According to Table 15-14 of the C2000 EDS (Intel doc #510524) the
rx data pointed to by the descriptor dptr contains the byte count.
desc->rxbytes reports all bytes read on the wire, including the
"byte count" byte. So if a device sends 4 bytes in response to a
block read, on the wire and in the DMA buffer we see:
This was discovered while developing a BMC solution relying on the
ipmi_ssif.c driver which was trying to interpret the bogus length
field as part of the IPMI response.
Signed-off-by: Stephen Douthit <stephend@adiengineering.com> Tested-by: Dan Priamo <danp@adiengineering.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
Dave Airlie [Tue, 29 Aug 2017 19:53:13 +0000 (05:53 +1000)]
Merge tag 'drm-misc-fixes-2017-08-28' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Driver Changes:
- bridge/sii8620: Fix out-of-bounds write to incorrect register
Cc: Maciej Purski <m.purski@samsung.com> Cc: Andrzej Hajda <a.hajda@samsung.com>
* tag 'drm-misc-fixes-2017-08-28' of git://anongit.freedesktop.org/git/drm-misc:
drm/bridge/sii8620: Fix memory corruption
Ben Hutchings [Thu, 1 Oct 2015 00:35:55 +0000 (01:35 +0100)]
alpha: uapi: Add support for __SANE_USERSPACE_TYPES__
This fixes compiler errors in perf such as:
tests/attr.c: In function 'store_event':
tests/attr.c:66:27: error: format '%llu' expects argument of type 'long long unsigned int', but argument 6 has type '__u64 {aka long unsigned int}' [-Werror=format=]
snprintf(path, PATH_MAX, "%s/event-%d-%llu-%d", dir,
^
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Michael Cree <mcree@orcon.net.nz> Cc: stable@vger.kernel.org Signed-off-by: Matt Turner <mattst88@gmail.com>
Guenter Roeck [Sat, 1 Aug 2015 02:32:39 +0000 (19:32 -0700)]
alpha: Define ioremap_wc
Commit 3cc2dac5be3f ("drivers/video/fbdev/atyfb: Replace MTRR UC hole
with strong UC") introduces calls to ioremap_wc and ioremap_uc. This
causes build failures with alpha:allmodconfig. Map the missing functions
to ioremap_nocache.
Fixes: 3cc2dac5be3f ("drivers/video/fbdev/atyfb:
Replace MTRR UC hole with strong UC") Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Matt Turner <mattst88@gmail.com>
Michael Cree [Sat, 24 Jun 2017 01:37:02 +0000 (13:37 +1200)]
alpha: support R_ALPHA_REFLONG relocations for module loading
Since commit 71810db27c1c853b33 (modversions: treat symbol CRCs
as 32 bit quantities) R_ALPHA_REFLONG relocations can be required
to load modules. This implements it.
Tested-by: Bob Tracy <rct@gherkin.frus.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael Cree <mcree@orcon.net.nz> Signed-off-by: Matt Turner <mattst88@gmail.com>
That said, the identity AND insns added by that patch are more
clearly written as MOV. At the same time, re-schedule the ev6
version so that the first dispatch can execute in parallel.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Matt Turner <mattst88@gmail.com>
Linus Torvalds [Tue, 29 Aug 2017 18:16:21 +0000 (11:16 -0700)]
Merge branch 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"A late but obvious fix for cgroup.
I broke the 'cpuset.memory_pressure' file a long time ago (v4.4) by
accidentally deleting its file index, which made it a duplicate of the
'cpuset.memory_migrate' file. Spotted and fixed by Waiman"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: Fix incorrect memory_pressure control file mapping
Linus Torvalds [Tue, 29 Aug 2017 18:13:52 +0000 (11:13 -0700)]
Merge branch 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Late fixes for libata. There's a minor platform driver fix but the
important one is READ LOG PAGE.
This is a new ATA command which is used to test some optional features
but it broke probing of some devices - they locked up instead of
failing the unknown command.
Christoph tried blacklisting, but, after finding out there are
multiple devices which fail this way, backed off to testing feature
bit in IDENTIFY data first, which is a bit lossy (we can miss features
on some devices) but should be a lot safer"
* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
Revert "libata: quirk read log on no-name M.2 SSD"
libata: check for trusted computing in IDENTIFY DEVICE data
libata: quirk read log on no-name M.2 SSD
sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()'
The warn_on happned when sk->sk_rmem_alloc wasn't 0 in inet_sock_destruct.
As after commit f970bd9e3a06 ("udp: implement memory accounting helpers"),
udp has changed to use udp_destruct_sock as sk_destruct where it would
udp_rmem_release all rmem.
But IPV6_ADDRFORM sockopt sets sk_destruct with inet_sock_destruct after
changing family to PF_INET. If rmem is not 0 at that time, and there is
no place to release rmem before calling inet_sock_destruct, the warn_on
will be triggered.
This patch is to fix it by not setting sk_destruct in IPV6_ADDRFORM sockopt
any more. As IPV6_ADDRFORM sockopt only works for tcp and udp. TCP sock has
already set it's sk_destruct with inet_sock_destruct and UDP has set with
udp_destruct_sock since they're created.
Fixes: f970bd9e3a06 ("udp: implement memory accounting helpers") Reported-by: ChunYu Wang <chunwang@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that that patch was complete and utter garbage, and broke
KVM, resulting in odd oopses.
Quoting Andrea Arcangeli:
"The aforementioned commit has 3 bugs.
1) mmu_notifier_invalidate_range cannot be used in replacement of
mmu_notifier_invalidate_range_start/end.
For KVM mmu_notifier_invalidate_range is a noop and rightfully so.
A MMU notifier implementation has to implement either
->invalidate_range method or the invalidate_range_start/end
methods, not both. And if you implement invalidate_range_start/end
like KVM is forced to do, calling mmu_notifier_invalidate_range in
common code is a noop for KVM.
For those MMU notifiers that can get away only implementing
->invalidate_range, the ->invalidate_range is implicitly called by
mmu_notifier_invalidate_range_end(). And only those secondary MMUs
that share the same pagetable with the primary MMU (like AMD
iommuv2) can get away only implementing ->invalidate_range.
So all cases (THP on/off) are broken right now.
To fix this is enough to replace mmu_notifier_invalidate_range with
mmu_notifier_invalidate_range_start;mmu_notifier_invalidate_range_end.
Either that or call multiple mmu_notifier_invalidate_page like
before.
2) address + (1UL << compound_order(page) is buggy, it should be
PAGE_SIZE << compound_order(page), it's bytes not pages, 2M not
512.
3) The whole invalidate_range thing was an attempt to call a single
invalidate while walking multiple 4k ptes that maps the same THP
(after a pmd virtual split without physical compound page THP
split).
It's unclear if the rmap_walk will always provide an address that
is 2M aligned as parameter to try_to_unmap_one, in presence of THP.
I think it needs also an address &= (PAGE_SIZE <<
compound_order(page)) - 1 to be safe"
In general, we should stop making excuses for horrible MMU notifier
users. It's much more important that the core VM is sane and safe, than
letting MMU notifiers sleep.
So if some MMU notifier is sleeping under a spinlock, we need to fix the
notifier, not try to make excuses for that garbage in the core VM.
Reported-and-tested-by: Bernhard Held <berny156@gmx.de> Reported-and-tested-by: Adam Borowski <kilobyte@angband.pl> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Wanpeng Li <kernellwp@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: axie <axie@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
libata: check for trusted computing in IDENTIFY DEVICE data
ATA-8 and later mirrors the TRUSTED COMPUTING SUPPORTED bit in word 48 of
the IDENTIFY DEVICE data. Check this before issuing a READ LOG PAGE
command to avoid issues with buggy devices. The only downside is that
we can't support Security Send / Receive for a device with an older
revision due to the conflicting use of this field in earlier
specifications.
tj: The reason we need this is because some devices which don't
support READ LOG PAGE lock up after getting issued that command.
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
James Cowgill [Fri, 31 Mar 2017 16:09:59 +0000 (17:09 +0100)]
MIPS: Remove pt_regs adjustments in indirect syscall handler
If a restartable syscall is called using the indirect o32 syscall
handler - eg: syscall(__NR_waitid, ...), then it is possible for the
incorrect arguments to be passed to the syscall after it has been
restarted. This is because the syscall handler tries to shift all the
registers down one place in pt_regs so that when the syscall is restarted,
the "real" syscall is called instead. Unfortunately it only shifts the
arguments passed in registers, not the arguments on the user stack. This
causes the 4th argument to be duplicated when the syscall is restarted.
Fix by removing all the pt_regs shifting so that the indirect syscall
handler is called again when the syscall is restarted. The comment "some
syscalls like execve get their arguments from struct pt_regs" is long
out of date so this should now be safe.
Signed-off-by: James Cowgill <James.Cowgill@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Tested-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/15856/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Fri, 11 Aug 2017 20:56:50 +0000 (21:56 +0100)]
MIPS: seccomp: Fix indirect syscall args
Since commit 669c4092225f ("MIPS: Give __secure_computing() access to
syscall arguments."), upon syscall entry when seccomp is enabled,
syscall_trace_enter() passes a carefully prepared struct seccomp_data
containing syscall arguments to __secure_computing(). Unfortunately it
directly uses mips_get_syscall_arg() and fails to take into account the
indirect O32 system calls (i.e. syscall(2)) which put the system call
number in a0 and have the arguments shifted up by one entry.
We can't just revert that commit as samples/bpf/tracex5 would break
again, so use syscall_get_arguments() which already takes indirect
syscalls into account instead of directly using mips_get_syscall_arg(),
similar to what populate_seccomp_data() does.
This also removes the redundant error checking of the
mips_get_syscall_arg() return value (get_user() already zeroes the
result if an argument from the stack can't be loaded).
Reported-by: James Cowgill <James.Cowgill@imgtec.com> Fixes: 669c4092225f ("MIPS: Give __secure_computing() access to syscall arguments.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: David Daney <david.daney@cavium.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16994/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Jan H. Schönherr [Sun, 27 Aug 2017 13:55:24 +0000 (15:55 +0200)]
x86/boot: Provide more slack space during decompression
The current slack space is not enough for LZ4, which has a worst case
overhead of 0.4% for data that cannot be further compressed. With
an LZ4 compressed kernel with an embedded initrd, the output is likely
to overwrite the input.
Increase the slack space to avoid that.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1503842124-29718-1-git-send-email-jschoenh@amazon.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
Zhou Chengming [Fri, 25 Aug 2017 13:49:37 +0000 (21:49 +0800)]
perf/ftrace: Fix double traces of perf on ftrace:function
When running perf on the ftrace:function tracepoint, there is a bug
which can be reproduced by:
perf record -e ftrace:function -a sleep 20 &
perf record -e ftrace:function ls
perf script
ls 10304 [005] 171.853235: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853237: ftrace:function:
perf_output_begin
ls 10304 [005] 171.853239: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853240: ftrace:function:
task_tgid_nr_ns
ls 10304 [005] 171.853242: ftrace:function:
__task_pid_nr_ns
ls 10304 [005] 171.853244: ftrace:function:
__task_pid_nr_ns
We can see that all the function traces are doubled.
The problem is caused by the inconsistency of the register
function perf_ftrace_event_register() with the probe function
perf_ftrace_function_call(). The former registers one probe
for every perf_event. And the latter handles all perf_events
on the current cpu. So when two perf_events on the current cpu,
the traces of them will be doubled.
So this patch adds an extra parameter "event" for perf_tp_event,
only send sample data to this event when it's not NULL.
Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: alexander.shishkin@linux.intel.com Cc: huawei.libin@huawei.com Link: http://lkml.kernel.org/r/1503668977-12526-1-git-send-email-zhouchengming1@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
Meng Xu [Wed, 23 Aug 2017 21:07:50 +0000 (17:07 -0400)]
perf/core: Fix potential double-fetch bug
While examining the kernel source code, I found a dangerous operation that
could turn into a double-fetch situation (a race condition bug) where the same
userspace memory region are fetched twice into kernel with sanity checks after
the first fetch while missing checks after the second fetch.
1. The first fetch happens in line 9573 get_user(size, &uattr->size).
2. Subsequently the 'size' variable undergoes a few sanity checks and
transformations (line 9577 to 9584).
3. The second fetch happens in line 9610 copy_from_user(attr, uattr, size)
4. Given that 'uattr' can be fully controlled in userspace, an attacker can
race condition to override 'uattr->size' to arbitrary value (say, 0xFFFFFFFF)
after the first fetch but before the second fetch. The changed value will be
copied to 'attr->size'.
5. There is no further checks on 'attr->size' until the end of this function,
and once the function returns, we lose the context to verify that 'attr->size'
conforms to the sanity checks performed in step 2 (line 9577 to 9584).
6. My manual analysis shows that 'attr->size' is not used elsewhere later,
so, there is no working exploit against it right now. However, this could
easily turns to an exploitable one if careless developers start to use
'attr->size' later.
To fix this, override 'attr->size' from the second fetch to the one from the
first fetch, regardless of what is actually copied in.
In this way, it is assured that 'attr->size' is consistent with the checks
performed after the first fetch.
Dan Carpenter [Fri, 18 Aug 2017 10:30:30 +0000 (13:30 +0300)]
x86/ldt: Fix off by one in get_segment_base()
ldt->entries[] is allocated in alloc_ldt_struct(). It has
ldt->nr_entries elements and ldt->nr_entries is capped at LDT_ENTRIES.
So if "idx" is == ldt->nr_entries then we're reading beyond the end of
the buffer. It seems duplicative to have two limit checks when one
would work just as well so I removed the check against LDT_ENTRIES.
The gdt_page.gdt[] array has GDT_ENTRIES entries.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Fixes: d07bdfd322d3 ("perf/x86: Fix USER/KERNEL tagging of samples properly") Link: http://lkml.kernel.org/r/20170818102516.gqwm4xdvvuvjw5ho@mwanda Signed-off-by: Ingo Molnar <mingo@kernel.org>
Florian Fainelli [Tue, 29 Aug 2017 00:10:51 +0000 (17:10 -0700)]
net: dsa: Don't dereference dst->cpu_dp->netdev
If we do not have a master network device attached dst->cpu_dp will be
NULL and accessing cpu_dp->netdev will create a trace similar to the one
below. The correct check is on dst->cpu_dp period.
[ 1.004650] DSA: switch 0 0 parsed
[ 1.008078] Unable to handle kernel NULL pointer dereference at
virtual address 00000010
[ 1.016195] pgd = c0003000
[ 1.018918] [00000010] *pgd=80000000004003, *pmd=00000000
[ 1.024349] Internal error: Oops: 206 [#1] SMP ARM
[ 1.029157] Modules linked in:
[ 1.032228] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc6-00071-g45b45afab9bd-dirty #7
[ 1.040772] Hardware name: Broadcom STB (Flattened Device Tree)
[ 1.046704] task: ee08f840 task.stack: ee090000
[ 1.051258] PC is at dsa_register_switch+0x5e0/0x9dc
[ 1.056234] LR is at dsa_register_switch+0x5d0/0x9dc
[ 1.061211] pc : [<c08fb28c>] lr : [<c08fb27c>] psr: 60000213
[ 1.067491] sp : ee091d88 ip : 00000000 fp : 0000000c
[ 1.072728] r10: 00000000 r9 : 00000001 r8 : ee208010
[ 1.077965] r7 : ee2b57b0 r6 : ee2b5780 r5 : 00000000 r4 : ee208e0c
[ 1.084506] r3 : 00000000 r2 : 00040d00 r1 : 2d1b2000 r0 : 00000016
[ 1.091050] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM
Segment user
[ 1.098199] Control: 32c5387d Table: 00003000 DAC: fffffffd
[ 1.103957] Process swapper/0 (pid: 1, stack limit = 0xee090210)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 6d3c8c0dd88a ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Mon, 28 Aug 2017 23:45:40 +0000 (16:45 -0700)]
page waitqueue: always add new entries at the end
Commit 3510ca20ece0 ("Minor page waitqueue cleanups") made the page
queue code always add new waiters to the back of the queue, which helps
upcoming patches to batch the wakeups for some horrid loads where the
wait queues grow to thousands of entries.
However, I forgot about the nasrt add_page_wait_queue() special case
code that is only used by the cachefiles code. That one still continued
to add the new wait queue entries at the beginning of the list.
Fix it, because any sane batched wakeup will require that we don't
suddenly start getting new entries at the beginning of the list that we
already handled in a previous batch.
[ The current code always does the whole list while holding the lock, so
wait queue ordering doesn't matter for correctness, but even then it's
better to add later entries at the end from a fairness standpoint ]
Roopa Prabhu [Sun, 27 Aug 2017 04:13:48 +0000 (21:13 -0700)]
bridge: check for null fdb->dst before notifying switchdev drivers
current switchdev drivers dont seem to support offloading fdb
entries pointing to the bridge device which have fdb->dst
not set to any port. This patch adds a NULL fdb->dst check in
the switchdev notifier code.
This patch fixes the below NULL ptr dereference:
$bridge fdb add 00:02:00:00:00:33 dev br0 self
Fixes: 6b26b51b1d13 ("net: bridge: Add support for notifying devices about FDB add/del") Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tejun Heo [Mon, 28 Aug 2017 21:51:27 +0000 (14:51 -0700)]
cpumask: fix spurious cpumask_of_node() on non-NUMA multi-node configs
When !NUMA, cpumask_of_node(@node) equals cpu_online_mask regardless of
@node. The assumption seems that if !NUMA, there shouldn't be more than
one node and thus reporting cpu_online_mask regardless of @node is
correct. However, that assumption was broken years ago to support
DISCONTIGMEM and whether a system has multiple nodes or not is
separately controlled by NEED_MULTIPLE_NODES.
This means that, on a system with !NUMA && NEED_MULTIPLE_NODES,
cpumask_of_node() will report cpu_online_mask for all possible nodes,
indicating that the CPUs are associated with multiple nodes which is an
impossible configuration.
This bug has been around forever but doesn't look like it has caused any
noticeable symptoms. However, it triggers a WARN recently added to
workqueue to verify NUMA affinity configuration.
Fix it by reporting empty cpumask on non-zero nodes if !NUMA.
Alexey Brodkin [Mon, 28 Aug 2017 22:03:58 +0000 (15:03 -0700)]
ARCv2: SMP: Mask only private-per-core IRQ lines on boot at core intc
Recent commit a8ec3ee861b6 "arc: Mask individual IRQ lines during core
INTC init" breaks interrupt handling on ARCv2 SMP systems.
That commit masked all interrupts at onset, as some controllers on some
boards (customer as well as internal), would assert interrutps early
before any handlers were installed. For SMP systems, the masking was
done at each cpu's core-intc. Later, when the IRQ was actually
requested, it was unmasked, but only on the requesting cpu.
For "common" interrupts, which were wired up from the 2nd level IDU
intc, this was as issue as they needed to be enabled on ALL the cpus
(given that IDU IRQs are by default served Round Robin across cpus)
So fix that by NOT masking "common" interrupts at core-intc, but instead
at the 2nd level IDU intc (latter already being done in idu_of_init())
Helge Deller [Wed, 23 Aug 2017 20:37:00 +0000 (22:37 +0200)]
fs/select: Fix memory corruption in compat_get_fd_set()
Commit 464d62421cb8 ("select: switch compat_{get,put}_fd_set() to
compat_{get,put}_bitmap()") changed the calculation on how many bytes
need to be zeroed when userspace handed over a NULL pointer for a fdset
array in the select syscall.
The calculation was changed in compat_get_fd_set() wrongly from
memset(fdset, 0, ((nr + 1) & ~1)*sizeof(compat_ulong_t));
to
memset(fdset, 0, ALIGN(nr, BITS_PER_LONG));
The ALIGN(nr, BITS_PER_LONG) calculates the number of _bits_ which need
to be zeroed in the target fdset array (rounded up to the next full bits
for an unsigned long).
But the memset() call expects the number of _bytes_ to be zeroed.
This leads to clearing more memory than wanted (on the stack area or
even at kmalloc()ed memory areas) and to random kernel crashes as we
have seen them on the parisc platform.
Xin Long [Sat, 26 Aug 2017 12:10:10 +0000 (20:10 +0800)]
ipv6: set dst.obsolete when a cached route has expired
Now it doesn't check for the cached route expiration in ipv6's
dst_ops->check(), because it trusts dst_gc that would clean the
cached route up when it's expired.
The problem is in dst_gc, it would clean the cached route only
when it's refcount is 1. If some other module (like xfrm) keeps
holding it and the module only release it when dst_ops->check()
fails.
But without checking for the cached route expiration, .check()
may always return true. Meanwhile, without releasing the cached
route, dst_gc couldn't del it. It will cause this cached route
never to expire.
This patch is to set dst.obsolete with DST_OBSOLETE_KILL in .gc
when it's expired, and check obsolete != DST_OBSOLETE_FORCE_CHK
in .check.
Note that this is even needed when ipv6 dst_gc timer is removed
one day. It would set dst.obsolete in .redirect and .update_pmtu
instead, and check for cached route expiration when getting it,
just like what ipv4 route does.
Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Fri, 25 Aug 2017 22:03:10 +0000 (15:03 -0700)]
ipv6: fix sparse warning on rt6i_node
Commit c5cff8561d2d adds rcu grace period before freeing fib6_node. This
generates a new sparse warning on rt->rt6i_node related code:
net/ipv6/route.c:1394:30: error: incompatible types in comparison
expression (different address spaces)
./include/net/ip6_fib.h:187:14: error: incompatible types in comparison
expression (different address spaces)
This commit adds "__rcu" tag for rt6i_node and makes sure corresponding
rcu API is used for it.
After this fix, sparse no longer generates the above warning.
Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Brivio [Fri, 25 Aug 2017 20:48:48 +0000 (22:48 +0200)]
cxgb4: Fix stack out-of-bounds read due to wrong size to t4_record_mbox()
Passing commands for logging to t4_record_mbox() with size
MBOX_LEN, when the actual command size is actually smaller,
causes out-of-bounds stack accesses in t4_record_mbox() while
copying command words here:
for (i = 0; i < size / 8; i++)
entry->cmd[i] = be64_to_cpu(cmd[i]);
Up to 48 bytes from the stack are then leaked to debugfs.
When we call t4_record_mbox() to log a command reply, a MBOX_LEN
size can be used though, as get_mbox_rpl() will fill cmd_rpl up
completely.
Fixes: 7f080c3f2ff0 ("cxgb4: Add support to enable logging of firmware mailbox commands") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>