From 50a6edb1b6e08643442386e8f81acc8123d17931 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sun, 28 Aug 2016 23:52:49 +0900 Subject: [PATCH] iio: adc: add ADC12130/ADC12132/ADC12138 ADC driver This adds Texas Instruments' ADC12130/ADC12132/ADC12138 12-bit plus sign ADC driver. I have tested with the ADC12138. The ADC12130 and ADC12132 are not tested but these are similar to ADC12138 except that the mode programming instruction is a bit different. Signed-off-by: Akinobu Mita Acked-by: Rob Herring Cc: Jonathan Cameron Cc: Hartmut Knaack Cc: Lars-Peter Clausen Cc: Peter Meerwald Signed-off-by: Jonathan Cameron --- .../bindings/iio/adc/ti-adc12138.txt | 37 ++ drivers/iio/adc/Kconfig | 12 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/ti-adc12138.c | 552 ++++++++++++++++++ 4 files changed, 602 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt create mode 100644 drivers/iio/adc/ti-adc12138.c diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt new file mode 100644 index 000000000000..049a1d36f013 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt @@ -0,0 +1,37 @@ +* Texas Instruments' ADC12130/ADC12132/ADC12138 + +Required properties: + - compatible: Should be one of + * "ti,adc12130" + * "ti,adc12132" + * "ti,adc12138" + - reg: SPI chip select number for the device + - interrupts: Should contain interrupt for EOC (end of conversion) + - clocks: phandle to conversion clock input + - spi-max-frequency: Definision as per + Documentation/devicetree/bindings/spi/spi-bus.txt + - vref-p-supply: The regulator supply for positive analog voltage reference + +Optional properties: + - vref-n-supply: The regulator supply for negative analog voltage reference + (Note that this must not go below GND or exceed vref-p) + If not specified, this is assumed to be analog ground. + - ti,acquisition-time: The number of conversion clock periods for the S/H's + acquisition time. Should be one of 6, 10, 18, 34. If not specified, + default value of 10 is used. + For high source impedances, this value can be increased to 18 or 34. + For less ADC accuracy and/or slower CCLK frequencies this value may be + decreased to 6. See section 6.0 INPUT SOURCE RESISTANCE in the + datasheet for details. + +Example: +adc@0 { + compatible = "ti,adc12138"; + reg = <0>; + interrupts = <28 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio1>; + clocks = <&cclk>; + vref-p-supply = <&ldo4_reg>; + spi-max-frequency = <5000000>; + ti,acquisition-time = <6>; +}; diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 6eac9236dff1..9f8e3813930e 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -438,6 +438,18 @@ config TI_ADC0832 This driver can also be built as a module. If so, the module will be called ti-adc0832. +config TI_ADC12138 + tristate "Texas Instruments ADC12130/ADC12132/ADC12138" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for Texas Instruments ADC12130, + ADC12132 and ADC12138 chips. + + This driver can also be built as a module. If so, the module will be + called ti-adc12138. + config TI_ADC128S052 tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" depends on SPI diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index f46dd1fdebae..d1a20b658c9a 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o +obj-$(CONFIG_TI_ADC12138) += ti-adc12138.o obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o diff --git a/drivers/iio/adc/ti-adc12138.c b/drivers/iio/adc/ti-adc12138.c new file mode 100644 index 000000000000..072f03bfe6a0 --- /dev/null +++ b/drivers/iio/adc/ti-adc12138.c @@ -0,0 +1,552 @@ +/* + * ADC12130/ADC12132/ADC12138 12-bit plus sign ADC driver + * + * Copyright (c) 2016 Akinobu Mita + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Datasheet: http://www.ti.com/lit/ds/symlink/adc12138.pdf + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define ADC12138_MODE_AUTO_CAL 0x08 +#define ADC12138_MODE_READ_STATUS 0x0c +#define ADC12138_MODE_ACQUISITION_TIME_6 0x0e +#define ADC12138_MODE_ACQUISITION_TIME_10 0x4e +#define ADC12138_MODE_ACQUISITION_TIME_18 0x8e +#define ADC12138_MODE_ACQUISITION_TIME_34 0xce + +#define ADC12138_STATUS_CAL BIT(6) + +enum { + adc12130, + adc12132, + adc12138, +}; + +struct adc12138 { + struct spi_device *spi; + unsigned int id; + /* conversion clock */ + struct clk *cclk; + /* positive analog voltage reference */ + struct regulator *vref_p; + /* negative analog voltage reference */ + struct regulator *vref_n; + struct mutex lock; + struct completion complete; + /* The number of cclk periods for the S/H's acquisition time */ + unsigned int acquisition_time; + + u8 tx_buf[2] ____cacheline_aligned; + u8 rx_buf[2]; +}; + +#define ADC12138_VOLTAGE_CHANNEL(chan) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = chan, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + | BIT(IIO_CHAN_INFO_OFFSET), \ + .scan_index = chan, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 13, \ + .storagebits = 16, \ + .shift = 3, \ + .endianness = IIO_BE, \ + }, \ + } + +#define ADC12138_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = (chan1), \ + .channel2 = (chan2), \ + .differential = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ + | BIT(IIO_CHAN_INFO_OFFSET), \ + .scan_index = si, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 13, \ + .storagebits = 16, \ + .shift = 3, \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec adc12132_channels[] = { + ADC12138_VOLTAGE_CHANNEL(0), + ADC12138_VOLTAGE_CHANNEL(1), + ADC12138_VOLTAGE_CHANNEL_DIFF(0, 1, 2), + ADC12138_VOLTAGE_CHANNEL_DIFF(1, 0, 3), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static const struct iio_chan_spec adc12138_channels[] = { + ADC12138_VOLTAGE_CHANNEL(0), + ADC12138_VOLTAGE_CHANNEL(1), + ADC12138_VOLTAGE_CHANNEL(2), + ADC12138_VOLTAGE_CHANNEL(3), + ADC12138_VOLTAGE_CHANNEL(4), + ADC12138_VOLTAGE_CHANNEL(5), + ADC12138_VOLTAGE_CHANNEL(6), + ADC12138_VOLTAGE_CHANNEL(7), + ADC12138_VOLTAGE_CHANNEL_DIFF(0, 1, 8), + ADC12138_VOLTAGE_CHANNEL_DIFF(1, 0, 9), + ADC12138_VOLTAGE_CHANNEL_DIFF(2, 3, 10), + ADC12138_VOLTAGE_CHANNEL_DIFF(3, 2, 11), + ADC12138_VOLTAGE_CHANNEL_DIFF(4, 5, 12), + ADC12138_VOLTAGE_CHANNEL_DIFF(5, 4, 13), + ADC12138_VOLTAGE_CHANNEL_DIFF(6, 7, 14), + ADC12138_VOLTAGE_CHANNEL_DIFF(7, 6, 15), + IIO_CHAN_SOFT_TIMESTAMP(16), +}; + +static int adc12138_mode_programming(struct adc12138 *adc, u8 mode, + void *rx_buf, int len) +{ + struct spi_transfer xfer = { + .tx_buf = adc->tx_buf, + .rx_buf = adc->rx_buf, + .len = len, + }; + int ret; + + /* Skip unused bits for ADC12130 and ADC12132 */ + if (adc->id != adc12138) + mode = (mode & 0xc0) | ((mode & 0x0f) << 2); + + adc->tx_buf[0] = mode; + + ret = spi_sync_transfer(adc->spi, &xfer, 1); + if (ret) + return ret; + + memcpy(rx_buf, adc->rx_buf, len); + + return 0; +} + +static int adc12138_read_status(struct adc12138 *adc) +{ + u8 rx_buf[2]; + int ret; + + ret = adc12138_mode_programming(adc, ADC12138_MODE_READ_STATUS, + rx_buf, 2); + if (ret) + return ret; + + return (rx_buf[0] << 1) | (rx_buf[1] >> 7); +} + +static int __adc12138_start_conv(struct adc12138 *adc, + struct iio_chan_spec const *channel, + void *data, int len) + +{ + const u8 ch_to_mux[] = { 0, 4, 1, 5, 2, 6, 3, 7 }; + u8 mode = (ch_to_mux[channel->channel] << 4) | + (channel->differential ? 0 : 0x80); + + return adc12138_mode_programming(adc, mode, data, len); +} + +static int adc12138_start_conv(struct adc12138 *adc, + struct iio_chan_spec const *channel) +{ + u8 trash; + + return __adc12138_start_conv(adc, channel, &trash, 1); +} + +static int adc12138_start_and_read_conv(struct adc12138 *adc, + struct iio_chan_spec const *channel, + __be16 *data) +{ + return __adc12138_start_conv(adc, channel, data, 2); +} + +static int adc12138_read_conv_data(struct adc12138 *adc, __be16 *value) +{ + /* Issue a read status instruction and read previous conversion data */ + return adc12138_mode_programming(adc, ADC12138_MODE_READ_STATUS, + value, sizeof(*value)); +} + +static int adc12138_wait_eoc(struct adc12138 *adc, unsigned long timeout) +{ + if (!wait_for_completion_timeout(&adc->complete, timeout)) + return -ETIMEDOUT; + + return 0; +} + +static int adc12138_adc_conversion(struct adc12138 *adc, + struct iio_chan_spec const *channel, + __be16 *value) +{ + int ret; + + reinit_completion(&adc->complete); + + ret = adc12138_start_conv(adc, channel); + if (ret) + return ret; + + ret = adc12138_wait_eoc(adc, msecs_to_jiffies(100)); + if (ret) + return ret; + + return adc12138_read_conv_data(adc, value); +} + +static int adc12138_read_raw(struct iio_dev *iio, + struct iio_chan_spec const *channel, int *value, + int *shift, long mask) +{ + struct adc12138 *adc = iio_priv(iio); + int ret; + __be16 data; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&adc->lock); + ret = adc12138_adc_conversion(adc, channel, &data); + mutex_unlock(&adc->lock); + if (ret) + return ret; + + *value = sign_extend32(be16_to_cpu(data) >> 3, 12); + + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + ret = regulator_get_voltage(adc->vref_p); + if (ret < 0) + return ret; + *value = ret; + + if (!IS_ERR(adc->vref_n)) { + ret = regulator_get_voltage(adc->vref_n); + if (ret < 0) + return ret; + *value -= ret; + } + + /* convert regulator output voltage to mV */ + *value /= 1000; + *shift = channel->scan_type.realbits - 1; + + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_OFFSET: + if (!IS_ERR(adc->vref_n)) { + *value = regulator_get_voltage(adc->vref_n); + if (*value < 0) + return *value; + } else { + *value = 0; + } + + /* convert regulator output voltage to mV */ + *value /= 1000; + + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static const struct iio_info adc12138_info = { + .read_raw = adc12138_read_raw, + .driver_module = THIS_MODULE, +}; + +static int adc12138_init(struct adc12138 *adc) +{ + int ret; + int status; + u8 mode; + u8 trash; + + reinit_completion(&adc->complete); + + ret = adc12138_mode_programming(adc, ADC12138_MODE_AUTO_CAL, &trash, 1); + if (ret) + return ret; + + /* data output at this time has no significance */ + status = adc12138_read_status(adc); + if (status < 0) + return status; + + adc12138_wait_eoc(adc, msecs_to_jiffies(100)); + + status = adc12138_read_status(adc); + if (status & ADC12138_STATUS_CAL) { + dev_warn(&adc->spi->dev, + "Auto Cal sequence is still in progress: %#x\n", + status); + return -EIO; + } + + switch (adc->acquisition_time) { + case 6: + mode = ADC12138_MODE_ACQUISITION_TIME_6; + break; + case 10: + mode = ADC12138_MODE_ACQUISITION_TIME_10; + break; + case 18: + mode = ADC12138_MODE_ACQUISITION_TIME_18; + break; + case 34: + mode = ADC12138_MODE_ACQUISITION_TIME_34; + break; + default: + return -EINVAL; + } + + return adc12138_mode_programming(adc, mode, &trash, 1); +} + +static irqreturn_t adc12138_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct adc12138 *adc = iio_priv(indio_dev); + __be16 data[20] = { }; /* 16x 2 bytes ADC data + 8 bytes timestamp */ + __be16 trash; + int ret; + int scan_index; + int i = 0; + + mutex_lock(&adc->lock); + + for_each_set_bit(scan_index, indio_dev->active_scan_mask, + indio_dev->masklength) { + const struct iio_chan_spec *scan_chan = + &indio_dev->channels[scan_index]; + + reinit_completion(&adc->complete); + + ret = adc12138_start_and_read_conv(adc, scan_chan, + i ? &data[i - 1] : &trash); + if (ret) { + dev_warn(&adc->spi->dev, + "failed to start conversion\n"); + goto out; + } + + ret = adc12138_wait_eoc(adc, msecs_to_jiffies(100)); + if (ret) { + dev_warn(&adc->spi->dev, "wait eoc timeout\n"); + goto out; + } + + i++; + } + + if (i) { + ret = adc12138_read_conv_data(adc, &data[i - 1]); + if (ret) { + dev_warn(&adc->spi->dev, + "failed to get conversion data\n"); + goto out; + } + } + + iio_push_to_buffers_with_timestamp(indio_dev, data, + iio_get_time_ns(indio_dev)); +out: + mutex_unlock(&adc->lock); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t adc12138_eoc_handler(int irq, void *p) +{ + struct iio_dev *indio_dev = p; + struct adc12138 *adc = iio_priv(indio_dev); + + complete(&adc->complete); + + return IRQ_HANDLED; +} + +static int adc12138_probe(struct spi_device *spi) +{ + struct iio_dev *indio_dev; + struct adc12138 *adc; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc)); + if (!indio_dev) + return -ENOMEM; + + adc = iio_priv(indio_dev); + adc->spi = spi; + adc->id = spi_get_device_id(spi)->driver_data; + mutex_init(&adc->lock); + init_completion(&adc->complete); + + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &adc12138_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + switch (adc->id) { + case adc12130: + case adc12132: + indio_dev->channels = adc12132_channels; + indio_dev->num_channels = ARRAY_SIZE(adc12132_channels); + break; + case adc12138: + indio_dev->channels = adc12138_channels; + indio_dev->num_channels = ARRAY_SIZE(adc12138_channels); + break; + default: + return -EINVAL; + } + + ret = of_property_read_u32(spi->dev.of_node, "ti,acquisition-time", + &adc->acquisition_time); + if (ret) + adc->acquisition_time = 10; + + adc->cclk = devm_clk_get(&spi->dev, NULL); + if (IS_ERR(adc->cclk)) + return PTR_ERR(adc->cclk); + + adc->vref_p = devm_regulator_get(&spi->dev, "vref-p"); + if (IS_ERR(adc->vref_p)) + return PTR_ERR(adc->vref_p); + + adc->vref_n = devm_regulator_get_optional(&spi->dev, "vref-n"); + if (IS_ERR(adc->vref_n)) { + /* + * Assume vref_n is 0V if an optional regulator is not + * specified, otherwise return the error code. + */ + ret = PTR_ERR(adc->vref_n); + if (ret != -ENODEV) + return ret; + } + + ret = devm_request_irq(&spi->dev, spi->irq, adc12138_eoc_handler, + IRQF_TRIGGER_RISING, indio_dev->name, indio_dev); + if (ret) + return ret; + + ret = clk_prepare_enable(adc->cclk); + if (ret) + return ret; + + ret = regulator_enable(adc->vref_p); + if (ret) + goto err_clk_disable; + + if (!IS_ERR(adc->vref_n)) { + ret = regulator_enable(adc->vref_n); + if (ret) + goto err_vref_p_disable; + } + + ret = adc12138_init(adc); + if (ret) + goto err_vref_n_disable; + + spi_set_drvdata(spi, indio_dev); + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + adc12138_trigger_handler, NULL); + if (ret) + goto err_vref_n_disable; + + ret = iio_device_register(indio_dev); + if (ret) + goto err_buffer_cleanup; + + return 0; +err_buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); +err_vref_n_disable: + if (!IS_ERR(adc->vref_n)) + regulator_disable(adc->vref_n); +err_vref_p_disable: + regulator_disable(adc->vref_p); +err_clk_disable: + clk_disable_unprepare(adc->cclk); + + return ret; +} + +static int adc12138_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct adc12138 *adc = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + if (!IS_ERR(adc->vref_n)) + regulator_disable(adc->vref_n); + regulator_disable(adc->vref_p); + clk_disable_unprepare(adc->cclk); + + return 0; +} + +#ifdef CONFIG_OF + +static const struct of_device_id adc12138_dt_ids[] = { + { .compatible = "ti,adc12130", }, + { .compatible = "ti,adc12132", }, + { .compatible = "ti,adc12138", }, + {} +}; +MODULE_DEVICE_TABLE(of, adc12138_dt_ids); + +#endif + +static const struct spi_device_id adc12138_id[] = { + { "adc12130", adc12130 }, + { "adc12132", adc12132 }, + { "adc12138", adc12138 }, + {} +}; +MODULE_DEVICE_TABLE(spi, adc12138_id); + +static struct spi_driver adc12138_driver = { + .driver = { + .name = "adc12138", + .of_match_table = of_match_ptr(adc12138_dt_ids), + }, + .probe = adc12138_probe, + .remove = adc12138_remove, + .id_table = adc12138_id, +}; +module_spi_driver(adc12138_driver); + +MODULE_AUTHOR("Akinobu Mita "); +MODULE_DESCRIPTION("ADC12130/ADC12132/ADC12138 driver"); +MODULE_LICENSE("GPL v2"); -- 2.39.2