1 RedBoot for Starter-Kit V (STK5)
4 ===========================================================
7 Fix FEC driver handling of 10BaseT link
11 Added support for TX53
16 Added support for redundant WinCE image load
21 Added support for splash screen, enabled with:
22 fconfig bootsplash_enable true
24 Name Default Value Description
25 lcd_bpp: 16 LCD color depth (only 16bpp for now)
26 lcd_buffer_addr: -2113929216 LCD frame buffer address (hex: 0x82000000)
27 lcd_clk_period: 33333 Pixel clock period (in ps)
28 lcd_clk_polarity: false Pixel clock polarity active low
29 lcd_panel_width: 640 LCD panel width (in pixels)
30 lcd_panel_height: 480 LCD panel height (in pixels)
31 lcd_hsync_polarity: true HSYNC polarity active low
32 lcd_hsync_width: 64 HSYNC pulse width (in pixels): 1 .. 64
33 lcd_margin_left: 96 Left margin (in pixels): 1 .. 256
34 lcd_margin_right: 80 Right margin (in pixels): 1 .. 256
35 lcd_margin_top: 46 Top margin (in scan lines): 0 .. 255
36 lcd_margin_bottom: 39 Bottom margin (in scan lines): 0 .. 255
37 lcd_vsync_polarity: true VSYNC polarity active low
38 lcd_vsync_width: 3 VSYNC pulse width (in scan lines): 0 .. 63
40 Image data is loaded from the flash partition named 'logo' and
41 can be stored either as a binary dump or in Windows .bmp
44 Renamed config/TX25-40x0.ecc to config/TX25-40x1.ecc to be in
45 sync with the module name
50 Added support for TX51-80x2 and TX51-80x1 (SDRAM clock selectable via cdl)
55 Fixed SDRAM timing according to application note from Micron.
57 Fixed display of reset reason.
58 Corrected DEBUG LED settings
60 Disabled FIS CRC check to facilitate update of the Linux
61 partition from within Linux (see RedBoot/README)
65 Added support for TX51-80x0
69 Corrected SDRAM timing setup for TX25 that was accidentally broken
70 in the previous release
74 switched to unified source tree for TX25,TX27,TX37
75 fixing some issues with bad block handling on TX27
79 Corrected the SDRAM initialisation for TX27-4021 (128MiB SDRAM)
84 Fixed a bug that lead to writing the RedBoot config partition on
85 every startup which would lead to excessive wearout of the flash.
86 The patch ecos-tx27-update.patch should be applied before compiling
91 + 'RedBoot config' partition merged with 'FIS Directory' into one
93 + improved bad block handling
94 + Flash partitioning changed due to the above
95 NOTE: The Linux kernel expects the RedBoot partition table at a
96 fixed block in flash determined by a configuration option.
97 Thus the new RedBoot version will only work with the new
99 + MAC address stored in processor internal fuse array
100 + new command: 'nand bad' to manually update the BBT