1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX27 current ;
34 package -hardware CYGPKG_HAL_ARM_TX27KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX27 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-926ejs-linux-gnueabi
79 # value_source default
80 # Default value: "arm-926ejs-linux-gnu" . (CYGBLD_ARM_EABI ? "eabi" : "")
81 # CYGBLD_ARM_EABI == 1
82 # --> arm-926ejs-linux-gnueabi
85 # Global compiler flags
86 # This option controls the global compiler flags which are used to
87 # compile all packages by default. Individual packages may define
88 # options which override these global flags.
90 cdl_option CYGBLD_GLOBAL_CFLAGS {
92 # No user value, uncomment the following line to provide one.
93 # user_value "-mabi=aapcs-linux -msoft-float -mcpu=arm9 -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # value_source default
95 # Default value: (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . (CYGBLD_ARM_EABI ? "-mabi=aapcs-linux -msoft-float " : "-mabi=apcs-gnu ") . "-mcpu=arm9 -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
97 # CYGBLD_ARM_ENABLE_THUMB_INTERWORK == 0
98 # CYGBLD_ARM_EABI == 1
99 # --> "-mabi=aapcs-linux -msoft-float -mcpu=arm9 -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
100 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
101 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
104 # The following properties are affected by this value
105 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
106 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
107 # option CYGBLD_INFRA_CFLAGS_PIPE
108 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
111 # Global linker flags
112 # This option controls the global linker flags. Individual
113 # packages may define options which override these global flags.
115 cdl_option CYGBLD_GLOBAL_LDFLAGS {
117 # No user value, uncomment the following line to provide one.
118 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # value_source default
120 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
123 # Build common GDB stub ROM image
124 # Unless a target board has specific requirements to the
125 # stub implementation, it can use a simple common stub.
126 # This option, which gets enabled by platform HALs as
127 # appropriate, controls the building of the common stub.
129 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
131 # No user value, uncomment the following line to provide one.
133 # value_source default
135 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
136 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
141 # ISO C library string functions
143 # This package provides string functions specified by the
144 # ISO C standard - ISO/IEC 9899:1990.
146 cdl_package CYGPKG_LIBC_STRING {
147 # Packages cannot be added or removed, nor can their version be changed,
148 # simply by editing their value. Instead the appropriate configuration
149 # should be used to perform these actions.
151 # This value cannot be modified here.
153 # Current value: 1 current
154 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
155 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
157 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
158 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
160 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
161 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
163 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
164 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
166 # Requires: CYGPKG_ISOINFRA
167 # CYGPKG_ISOINFRA == current
172 # Inline versions of <string.h> functions
173 # This option chooses whether some of the
174 # particularly simple string functions from
175 # <string.h> are available as inline
176 # functions. This may improve performance, and as
177 # the functions are small, may even improve code
180 cdl_option CYGIMP_LIBC_STRING_INLINES {
182 # No user value, uncomment the following line to provide one.
184 # value_source default
188 # Optimize string functions for code size
189 # This option tries to reduce string function
190 # code size at the expense of execution speed. The
191 # same effect can be produced if the code is
192 # compiled with the -Os option to the compiler.
194 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
196 # No user value, uncomment the following line to provide one.
198 # value_source default
202 # Provide BSD compatibility functions
203 # Enabling this option causes various compatibility functions
204 # commonly found in the BSD UNIX operating system to be included.
205 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
206 # strncasecmp, index, rindex and swab.
208 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
210 # No user value, uncomment the following line to provide one.
212 # The inferred value should not be edited directly.
214 # value_source inferred
216 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
217 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
219 # Requires: CYGINT_ISO_CTYPE
220 # CYGINT_ISO_CTYPE == 1
225 # These options control the behaviour of the
226 # strtok() and strtok_r() string tokenization
229 cdl_component CYGPKG_LIBC_STRING_STRTOK {
230 # There is no associated value.
234 # Per-thread strtok()
235 # This option controls whether the string function
236 # strtok() has its state recorded on a per-thread
237 # basis rather than global. If this option is
238 # disabled, some per-thread space can be saved.
239 # Note there is also a POSIX-standard strtok_r()
240 # function to achieve a similar effect with user
241 # support. Enabling this option will use one slot
242 # of kernel per-thread data. You should ensure you
243 # have enough slots configured for all your
246 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
247 # This option is not active
248 # ActiveIf constraint: CYGPKG_KERNEL
249 # CYGPKG_KERNEL (unknown) == 0
253 # No user value, uncomment the following line to provide one.
255 # value_source default
256 # Default value: CYGVAR_KERNEL_THREADS_DATA
257 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
259 # Requires: CYGVAR_KERNEL_THREADS_DATA
260 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
265 # Trace verbosity level for debugging the <string.h>
266 # functions strtok() and strtok_r(). Increase this
267 # value to get additional trace output.
269 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
271 # No user value, uncomment the following line to provide one.
273 # value_source default
275 # Legal values: 0 to 1
280 # This option indicates whether strdup() is to be supported.
282 cdl_option CYGFUN_LIBC_STRING_STRDUP {
283 # ActiveIf constraint: CYGINT_ISO_MALLOC
284 # CYGINT_ISO_MALLOC == 1
287 # Calculated value: 1
292 # C library string functions build options
293 # Package specific build options including control over
294 # compiler flags used only in building this package,
295 # and details of which tests are built.
297 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
298 # There is no associated value.
302 # Additional compiler flags
303 # This option modifies the set of compiler flags for
304 # building the C library. These flags are used in addition
305 # to the set of global flags.
307 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
309 # No user value, uncomment the following line to provide one.
310 # user_value "-fno-rtti -Woverloaded-virtual"
311 # value_source default
312 # Default value: "-fno-rtti -Woverloaded-virtual"
315 # Suppressed compiler flags
316 # This option modifies the set of compiler flags for
317 # building the C library. These flags are removed from
318 # the set of global flags if present.
320 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
322 # No user value, uncomment the following line to provide one.
323 # user_value -Wno-pointer-sign
324 # value_source default
325 # Default value: -Wno-pointer-sign
328 # C library string function tests
329 # This option specifies the set of tests for the C library
332 cdl_option CYGPKG_LIBC_STRING_TESTS {
333 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
335 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
340 # Common ethernet support
341 # doc: ref/io-eth-drv-generic.html
342 # Platform independent ethernet drivers
344 cdl_package CYGPKG_IO_ETH_DRIVERS {
345 # Packages cannot be added or removed, nor can their version be changed,
346 # simply by editing their value. Instead the appropriate configuration
347 # should be used to perform these actions.
349 # This value cannot be modified here.
351 # Current value: 1 current
353 # The following properties are affected by this value
354 # component CYGPKG_REDBOOT_NETWORKING
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_ARM_TX27
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
358 # package CYGPKG_DEVS_ETH_FEC
359 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
360 # package CYGPKG_DEVS_ETH_PHY
361 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
367 cdl_interface CYGHWR_NET_DRIVERS {
368 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
369 # This value cannot be modified here.
373 # The following properties are affected by this value
374 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
375 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
377 # ActiveIf: CYGHWR_NET_DRIVERS > 1
380 # Driver supports multicast addressing
381 # This interface defines whether or not a driver can handle
382 # requests for multicast addressing.
384 cdl_interface CYGINT_IO_ETH_MULTICAST {
385 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
386 # This value cannot be modified here.
390 # The following properties are affected by this value
393 # Support printing driver debug information
394 # Selecting this option will include code to allow the driver to
395 # print lots of information on diagnostic output such as full
398 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
400 # No user value, uncomment the following line to provide one.
402 # value_source default
407 # Driver debug output verbosity
408 # The value of this option indicates the default verbosity
409 # level of debugging output. 0 means no debugging output
410 # is made by default. Higher values indicate higher verbosity.
411 # The verbosity level may also be changed at run time by
412 # changing the variable cyg_io_eth_net_debug.
414 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
416 # No user value, uncomment the following line to provide one.
418 # value_source default
423 # Size of scatter-gather I/O lists
424 # A scatter-gather list is used to pass requests to/from
425 # the physical device driver. This list can typically be
426 # small, as the data is normally already packed into reasonable
429 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
431 # No user value, uncomment the following line to provide one.
433 # value_source default
437 # Support for standard eCos TCP/IP stack.
439 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
440 # This option is not active
441 # ActiveIf constraint: CYGPKG_NET
442 # CYGPKG_NET (unknown) == 0
446 # No user value, uncomment the following line to provide one.
448 # value_source default
450 # Requires: CYGINT_ISO_STRING_STRFUNCS
451 # CYGINT_ISO_STRING_STRFUNCS == 1
456 # Warn when there are no more mbufs
457 # Warnings about running out of mbufs are printed to the
458 # diagnostic output channel via diag_printf() if this option
459 # is enabled. Mbufs are the network stack's basic dynamic
460 # memory objects that hold all packets in transit; running
461 # out is bad for performance but not fatal, not a crash.
462 # You might want to turn off the warnings to preserve realtime
463 # properties of the system even in extremis.
465 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
466 # This option is not active
467 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
470 # No user value, uncomment the following line to provide one.
472 # value_source default
476 # Simulate network failures for testing
477 # This package contains a suite of simulated failure modes
478 # for the ethernet device layer, including dropping and/or
479 # corrupting received packets, dropping packets queued for
480 # transmission, and simulating a complete network break.
481 # It requires the kernel as a source of time information.
483 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
484 # This option is not active
485 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
488 # No user value, uncomment the following line to provide one.
490 # value_source default
495 # Drop incoming packets (percentage)
497 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
498 # This option is not active
499 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
500 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
503 # No user value, uncomment the following line to provide one.
505 # value_source default
506 # Default value: 1 10
507 # Legal values: 10 50 80
510 # Corrupt incoming packets (percentage)
512 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
513 # This option is not active
514 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
515 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
518 # No user value, uncomment the following line to provide one.
520 # value_source default
521 # Default value: 1 10
522 # Legal values: 10 50 80
525 # Drop outgoing packets (percentage)
527 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
528 # This option is not active
529 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
530 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
533 # No user value, uncomment the following line to provide one.
535 # value_source default
536 # Default value: 1 10
537 # Legal values: 10 50 80
540 # Simulate a line cut from time to time
541 # This option causes the system to drop all packets for a
542 # short random period (10s of seconds), and then act
543 # normally for up to 4 times that long. This simulates your
544 # sysadmin fiddling with plugs in the network switch
547 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
548 # This option is not active
549 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
550 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
553 # No user value, uncomment the following line to provide one.
555 # value_source default
561 # Support for stand-alone network stack.
563 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
564 # ActiveIf constraint: !CYGPKG_NET
565 # CYGPKG_NET (unknown) == 0
569 # No user value, uncomment the following line to provide one.
571 # value_source default
573 # Requires: CYGINT_ISO_STRING_MEMFUNCS
574 # CYGINT_ISO_STRING_MEMFUNCS == 1
579 # Pass packets to an alternate stack
580 # Define this to allow packets seen by this layer to be
581 # passed on to the previous logical layer, i.e. when
582 # stand-alone processing replaces system (eCos) processing.
584 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
586 # No user value, uncomment the following line to provide one.
588 # value_source default
589 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
590 # CYGPKG_REDBOOT_NETWORKING == 1
594 # Number of [network] buffers
595 # This option is used to allocate space to buffer incoming network
596 # packets. These buffers are used to hold data until they can be
597 # logically processed by higher layers.
599 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
601 # No user value, uncomment the following line to provide one.
603 # value_source default
605 # Legal values: 2 to 32
608 # Show driver warnings
609 # Selecting this option will allows the stand-alone ethernet driver
610 # to display warnings on the system console when incoming network
611 # packets are being discarded due to lack of buffer space.
613 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
614 # ActiveIf constraint: CYGPKG_REDBOOT
615 # CYGPKG_REDBOOT == current
619 # No user value, uncomment the following line to provide one.
621 # value_source default
626 # Support for lwIP network stack.
628 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
629 # This option is not active
630 # ActiveIf constraint: CYGPKG_NET_LWIP
631 # CYGPKG_NET_LWIP (unknown) == 0
635 # No user value, uncomment the following line to provide one.
637 # value_source default
639 # Requires: !CYGPKG_NET
640 # CYGPKG_NET (unknown) == 0
644 # Interrupt support required
645 # This interface is used to indicate to the low
646 # level device drivers that interrupt driven operation
647 # is required by higher layers.
649 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
650 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
651 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
652 # This value cannot be modified here.
656 # The following properties are affected by this value
659 # Common ethernet support build options
661 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
662 # There is no associated value.
666 # Additional compiler flags
667 # This option modifies the set of compiler flags for
668 # building the common ethernet support package. These flags are used in addition
669 # to the set of global flags.
671 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
673 # No user value, uncomment the following line to provide one.
674 # user_value "-D_KERNEL -D__ECOS"
675 # value_source default
676 # Default value: "-D_KERNEL -D__ECOS"
680 # Ethernet driver for Ka-Ro electronics TX27 processor module
682 cdl_package CYGPKG_DEVS_ETH_ARM_TX27 {
683 # Packages cannot be added or removed, nor can their version be changed,
684 # simply by editing their value. Instead the appropriate configuration
685 # should be used to perform these actions.
687 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
688 # CYGPKG_IO_ETH_DRIVERS == current
691 # This value cannot be modified here.
693 # Current value: 1 current
697 # FEC ethernet driver required
699 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
700 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
701 # This value cannot be modified here.
705 # The following properties are affected by this value
706 # package CYGPKG_DEVS_ETH_FEC
707 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
710 # Ka-Ro TX27 ethernet port driver
711 # This option includes the ethernet device driver for the
714 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
716 # No user value, uncomment the following line to provide one.
718 # value_source default
720 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
721 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
723 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
724 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
729 # Device name for the ETH0 ethernet driver
730 # This option sets the name of the ethernet device.
732 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
734 # No user value, uncomment the following line to provide one.
735 # user_value "\"eth0\""
736 # value_source default
737 # Default value: "\"eth0\""
740 # OUI part of MAC address
741 # This option sets OUI part (manufacturer ID) of the MAC address
744 cdl_option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI {
745 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
746 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
750 # No user value, uncomment the following line to provide one.
751 # user_value "{ 0x00, 0x0c, 0xc6 }"
752 # value_source default
753 # Default value: "{ 0x00, 0x0c, 0xc6 }"
758 # Driver for fast ethernet controller.
759 # Driver for fast ethernet controller.
761 cdl_package CYGPKG_DEVS_ETH_FEC {
762 # Packages cannot be added or removed, nor can their version be changed,
763 # simply by editing their value. Instead the appropriate configuration
764 # should be used to perform these actions.
766 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
767 # CYGPKG_IO_ETH_DRIVERS == current
769 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
770 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
773 # This value cannot be modified here.
775 # Current value: 1 current
779 # MXC FEC ethernet driver build options
781 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
782 # There is no associated value.
786 # Additional compiler flags
787 # This option modifies the set of compiler flags for
788 # building the Cirrus Logic ethernet driver package.
789 # These flags are used in addition
790 # to the set of global flags.
792 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
794 # No user value, uncomment the following line to provide one.
795 # user_value "-D_KERNEL -D__ECOS"
796 # value_source default
797 # Default value: "-D_KERNEL -D__ECOS"
801 # MXC FEC MII Gasket for RMII mode
802 # This option enables the use of the MII Gasket for
803 # RMII mode found in i.MX25 and i.MX53 processors.
805 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
806 # This option is not active
807 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
808 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
809 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
813 # No user value, uncomment the following line to provide one.
815 # value_source default
820 # Ethernet transceiver (PHY) support
821 # API for ethernet PHY devices
823 cdl_package CYGPKG_DEVS_ETH_PHY {
824 # Packages cannot be added or removed, nor can their version be changed,
825 # simply by editing their value. Instead the appropriate configuration
826 # should be used to perform these actions.
828 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
829 # CYGPKG_IO_ETH_DRIVERS == current
832 # This value cannot be modified here.
834 # Current value: 1 current
835 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
836 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
841 # Enable driver debugging
842 # Enables the diagnostic debug messages on the
845 cdl_option CYGDBG_DEVS_ETH_PHY {
847 # No user value, uncomment the following line to provide one.
849 # value_source default
853 # Time period (seconds) to wait for auto-negotiation
854 # The length of time to wait for auto-negotiation to complete
855 # before giving up and declaring the link dead/missing.
857 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
859 # No user value, uncomment the following line to provide one.
861 # value_source default
866 # Include support for National Semiconductor DP83847 DsPHYTER II
868 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
870 # No user value, uncomment the following line to provide one.
872 # value_source default
877 # Include support for AMD 79C874 NetPHY
879 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
881 # No user value, uncomment the following line to provide one.
883 # value_source default
888 # Include support for Intel LXT972xxx PHY
890 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
892 # No user value, uncomment the following line to provide one.
894 # value_source default
899 # Include support for ICS 1890 PHY
901 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
903 # No user value, uncomment the following line to provide one.
905 # value_source default
910 # Include support for ICS 1892 PHY
912 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
914 # No user value, uncomment the following line to provide one.
916 # value_source default
921 # Include support for ICS 1893 and 1893AF PHY
923 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
925 # No user value, uncomment the following line to provide one.
927 # value_source default
932 # Include support for the Davicom DM9161A PHY
934 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
936 # No user value, uncomment the following line to provide one.
938 # value_source default
943 # Include support for the Micrel KS8721 PHY
945 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
947 # No user value, uncomment the following line to provide one.
949 # value_source default
954 # Include support for SMSC LAN8700 NetPHY
956 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
958 # No user value, uncomment the following line to provide one.
960 # The inferred value should not be edited directly.
962 # value_source inferred
965 # The following properties are affected by this value
966 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
967 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
972 # ISO C library internationalization functions
974 # This package provides internationalization functions specified by the
975 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
976 # functionality and <ctype.h> functionality.
978 cdl_package CYGPKG_LIBC_I18N {
979 # Packages cannot be added or removed, nor can their version be changed,
980 # simply by editing their value. Instead the appropriate configuration
981 # should be used to perform these actions.
983 # This value cannot be modified here.
985 # Current value: 1 current
986 # Requires: CYGPKG_ISOINFRA
987 # CYGPKG_ISOINFRA == current
993 # These options determine which locales other than the "C" locale
994 # are supported and hence contribute to the size of the executable.
996 cdl_component CYGPKG_LIBC_I18N_LOCALES {
997 # There is no associated value.
1001 # Support for multiple locales required
1003 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
1004 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1005 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1006 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1007 # This value cannot be modified here.
1009 # Current value: 0 0
1010 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1011 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1014 # The following properties are affected by this value
1017 # C-SJIS locale support
1018 # This option controls if the "C-SJIS" locale will be
1019 # supported by setlocale(). The locale is a hybrid locale
1020 # that is mostly the "C" locale with Japanese SJIS multibyte
1023 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1025 # No user value, uncomment the following line to provide one.
1027 # value_source default
1030 # The following properties are affected by this value
1031 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1032 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1033 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1034 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1037 # C-JIS locale support
1038 # This option controls if the "C-JIS" locale will be
1039 # supported by setlocale(). The locale is a hybrid locale
1040 # that is mostly the "C" locale with Japanese JIS multibyte
1043 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1045 # No user value, uncomment the following line to provide one.
1047 # value_source default
1050 # The following properties are affected by this value
1051 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1052 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1053 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1054 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1057 # C-EUCJP locale support
1058 # This option controls if the "C-EUCJP" locale will be
1059 # supported by setlocale(). The locale is a hybrid locale
1060 # that is mostly the "C" locale with Japanese EUCJP multibyte
1063 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1065 # No user value, uncomment the following line to provide one.
1067 # value_source default
1070 # The following properties are affected by this value
1071 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1072 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1073 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1074 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1078 # Newlib's ctype implementation
1079 # This option enables the implementation of the ctype functions
1080 # that comes with newlib. It is table driven and therefore
1081 # exhibits different performance characteristics. It also offers
1082 # a limited amount of binary compatibility
1083 # with newlib so that programs linked against newlib ctype/locale
1084 # do not need to be recompiled when linked with eCos.
1086 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1088 # No user value, uncomment the following line to provide one.
1090 # value_source default
1092 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1093 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1097 # Per-thread multibyte state
1098 # This option controls whether the multibyte character
1099 # handling functions mblen(), mbtowc(), and wctomb(),
1100 # have their state recorded on a per-thread
1101 # basis rather than global. If this option is
1102 # disabled, some per-thread space can be saved.
1103 # Enabling this option will use three slots
1104 # of kernel per-thread data. You should ensure you
1105 # have enough slots configured for all your
1108 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1109 # This option is not active
1110 # ActiveIf constraint: CYGPKG_KERNEL
1111 # CYGPKG_KERNEL (unknown) == 0
1115 # No user value, uncomment the following line to provide one.
1117 # value_source default
1118 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1119 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1121 # Requires: CYGVAR_KERNEL_THREADS_DATA
1122 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1126 # Size of locale name strings
1127 # This option controls the maximum size of
1128 # locale names and is used, among other things
1129 # to instantiate a static string used
1130 # as a return value from the
1131 # setlocale() function. When requesting the
1132 # current locale settings with LC_ALL, a string
1133 # must be constructed to contain this data, rather
1134 # than just returning a constant string. This
1135 # string data is stored in the static string.
1136 # This depends on the length of locale names,
1137 # hence this option. If just the C locale is
1138 # present, this option can be set as low as 2.
1140 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1142 # No user value, uncomment the following line to provide one.
1144 # value_source default
1145 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1146 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1147 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1150 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1151 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1152 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1153 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1156 # Inline versions of <ctype.h> functions
1157 # This option chooses whether the simple character
1158 # classification and conversion functions (e.g.
1159 # isupper(), isalpha(), toupper(), etc.)
1160 # from <ctype.h> are available as inline
1161 # functions. This may improve performance and as
1162 # the functions are small, may even improve code
1165 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1167 # No user value, uncomment the following line to provide one.
1169 # value_source default
1171 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1172 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1176 # C library i18n functions build options
1177 # Package specific build options including control over
1178 # compiler flags used only in building this package,
1179 # and details of which tests are built.
1181 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1182 # There is no associated value.
1186 # Additional compiler flags
1187 # This option modifies the set of compiler flags for
1188 # building the C library. These flags are used in addition
1189 # to the set of global flags.
1191 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1193 # No user value, uncomment the following line to provide one.
1194 # user_value "-fno-rtti -Woverloaded-virtual"
1195 # value_source default
1196 # Default value: "-fno-rtti -Woverloaded-virtual"
1199 # Suppressed compiler flags
1200 # This option modifies the set of compiler flags for
1201 # building the C library. These flags are removed from
1202 # the set of global flags if present.
1204 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1206 # No user value, uncomment the following line to provide one.
1207 # user_value -Wno-pointer-sign
1208 # value_source default
1209 # Default value: -Wno-pointer-sign
1212 # C library i18n function tests
1213 # This option specifies the set of tests for the C library
1216 cdl_option CYGPKG_LIBC_I18N_TESTS {
1217 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1219 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1224 # ISO C library general utility functions
1225 # doc: ref/libc.html
1226 # This package provides general utility functions in <stdlib.h>
1227 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1229 cdl_package CYGPKG_LIBC_STDLIB {
1230 # Packages cannot be added or removed, nor can their version be changed,
1231 # simply by editing their value. Instead the appropriate configuration
1232 # should be used to perform these actions.
1234 # This value cannot be modified here.
1236 # Current value: 1 current
1237 # Requires: CYGPKG_ISOINFRA
1238 # CYGPKG_ISOINFRA == current
1240 # Requires: CYGINT_ISO_CTYPE
1241 # CYGINT_ISO_CTYPE == 1
1243 # Requires: CYGINT_ISO_STRING_STRFUNCS
1244 # CYGINT_ISO_STRING_STRFUNCS == 1
1249 # Inline versions of <stdlib.h> functions
1250 # This option chooses whether some of the
1251 # particularly simple standard utility functions
1252 # from <stdlib.h> are available as inline
1253 # functions. This may improve performance, and as
1254 # the functions are small, may even improve code
1257 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1258 # There is no associated value.
1264 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1266 # No user value, uncomment the following line to provide one.
1268 # value_source default
1270 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1271 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1277 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1279 # No user value, uncomment the following line to provide one.
1281 # value_source default
1283 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1284 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1288 # atof() / atoi() / atol()
1290 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1292 # No user value, uncomment the following line to provide one.
1294 # value_source default
1296 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1297 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1302 # Random number generation
1303 # These options control the behaviour of the
1304 # functions rand(), srand() and rand_r()
1306 cdl_component CYGPKG_LIBC_RAND {
1307 # There is no associated value.
1311 # Per-thread random seed
1312 # doc: ref/libc-thread-safety.html
1313 # This option controls whether the pseudo-random
1314 # number generation functions rand() and srand()
1315 # have their state recorded on a per-thread
1316 # basis rather than global. If this option is
1317 # disabled, some per-thread space can be saved.
1318 # Note there is also a POSIX-standard rand_r()
1319 # function to achieve a similar effect with user
1320 # support. Enabling this option will use one slot
1321 # of kernel per-thread data. You should ensure you
1322 # have enough slots configured for all your
1325 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1327 # No user value, uncomment the following line to provide one.
1329 # value_source default
1331 # Requires: CYGVAR_KERNEL_THREADS_DATA
1332 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1336 # Random number seed
1337 # This selects the initial random number seed for
1338 # rand()'s pseudo-random number generator. For
1339 # strict ISO standard compliance, this should be 1,
1340 # as per section 7.10.2.2 of the standard.
1342 cdl_option CYGNUM_LIBC_RAND_SEED {
1344 # No user value, uncomment the following line to provide one.
1346 # value_source default
1348 # Legal values: 0 to 0x7fffffff
1352 # Trace verbosity level for debugging the rand(),
1353 # srand() and rand_r() functions. Increase this
1354 # value to get additional trace output.
1356 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1358 # No user value, uncomment the following line to provide one.
1360 # value_source default
1362 # Legal values: 0 to 1
1365 # Simplest implementation
1366 # This provides a very simple implementation of rand()
1367 # that does not perform well with randomness in the
1368 # lower significant bits. However it is exceptionally
1369 # fast. It uses the sample algorithm from the ISO C
1372 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1374 # No user value, uncomment the following line to provide one.
1376 # value_source default
1380 # Simple implementation #1
1381 # This provides a very simple implementation of rand()
1382 # based on the simplest implementation above. However
1383 # it does try to work around the lack of randomness
1384 # in the lower significant bits, at the expense of a
1387 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1394 # Knuth implementation #1
1395 # This implements a slightly more complex algorithm
1396 # published in Donald E. Knuth's Art of Computer
1397 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1398 # This produces better random numbers than the
1399 # simplest approach but is slower.
1401 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1410 # This option allows use of the utility function
1411 # strtod() (and consequently atof()) to convert
1412 # from string to double precision floating point
1413 # numbers. Disabling this option removes the
1414 # dependency on the math library package.
1416 cdl_option CYGFUN_LIBC_strtod {
1418 # No user value, uncomment the following line to provide one.
1420 # value_source default
1421 # Default value: 0 != CYGPKG_LIBM
1422 # CYGPKG_LIBM (unknown) == 0
1424 # Requires: CYGPKG_LIBM
1425 # CYGPKG_LIBM (unknown) == 0
1429 # Provides long long conversion functions
1430 # Enabling this option will provide support for the strtoll(),
1431 # strtoull() and atoll() conversion functions, which are
1432 # the long long variants of the standard versions of these
1433 # functions. Supporting this requires extra code and compile
1436 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1443 # bsearch() tracing level
1444 # Trace verbosity level for debugging the <stdlib.h>
1445 # binary search function bsearch(). Increase this
1446 # value to get additional trace output.
1448 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1450 # No user value, uncomment the following line to provide one.
1452 # value_source default
1454 # Legal values: 0 to 1
1457 # qsort() tracing level
1458 # Trace verbosity level for debugging the <stdlib.h>
1459 # quicksort function qsort(). Increase this value
1460 # to get additional trace output.
1462 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1464 # No user value, uncomment the following line to provide one.
1466 # value_source default
1468 # Legal values: 0 to 1
1471 # C library stdlib build options
1472 # Package specific build options including control over
1473 # compiler flags used only in building this package,
1474 # and details of which tests are built.
1476 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1477 # There is no associated value.
1481 # Additional compiler flags
1482 # This option modifies the set of compiler flags for
1483 # building this package. These flags are used in addition
1484 # to the set of global flags.
1486 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1488 # No user value, uncomment the following line to provide one.
1489 # user_value "-fno-rtti -Woverloaded-virtual"
1490 # value_source default
1491 # Default value: "-fno-rtti -Woverloaded-virtual"
1494 # Suppressed compiler flags
1495 # This option modifies the set of compiler flags for
1496 # building this package. These flags are removed from
1497 # the set of global flags if present.
1499 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1501 # No user value, uncomment the following line to provide one.
1502 # user_value -Wno-pointer-sign
1503 # value_source default
1504 # Default value: -Wno-pointer-sign
1507 # C library stdlib tests
1508 # This option specifies the set of tests for this package.
1510 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1511 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1513 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1520 # doc: ref/the-ecos-hardware-abstraction-layer.html
1521 # The eCos HAL package provide a porting layer for
1522 # higher-level parts of the system such as the kernel and the
1523 # C library. Each installation should have HAL packages for
1524 # one or more architectures, and for each architecture there
1525 # may be one or more supported platforms. It is necessary to
1526 # select one target architecture and one platform for that
1527 # architecture. There are also a number of configuration
1528 # options that are common to all HAL packages.
1530 cdl_package CYGPKG_HAL {
1531 # Packages cannot be added or removed, nor can their version be changed,
1532 # simply by editing their value. Instead the appropriate configuration
1533 # should be used to perform these actions.
1535 # This value cannot be modified here.
1537 # Current value: 1 current
1538 # Requires: CYGPKG_INFRA
1539 # CYGPKG_INFRA == current
1542 # The following properties are affected by this value
1546 # Platform-independent HAL options
1547 # A number of configuration options are common to most or all
1548 # HAL packages, for example options controlling how much state
1549 # should be saved during a context switch. The implementations
1550 # of these options will vary from architecture to architecture.
1552 cdl_component CYGPKG_HAL_COMMON {
1553 # There is no associated value.
1557 # Provide eCos kernel support
1558 # The HAL can be configured to either support the full eCos
1559 # kernel, or to support only very simple applications which do
1560 # not require a full kernel. If kernel support is not required
1561 # then some of the startup, exception, and interrupt handling
1562 # code can be eliminated.
1564 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1566 # No user value, uncomment the following line to provide one.
1568 # value_source default
1569 # Default value: CYGPKG_KERNEL
1570 # CYGPKG_KERNEL (unknown) == 0
1572 # Requires: CYGPKG_KERNEL
1573 # CYGPKG_KERNEL (unknown) == 0
1577 # HAL exception support
1578 # When a processor exception occurs, for example an attempt to
1579 # execute an illegal instruction or to perform a divide by
1580 # zero, this exception may be handled in a number of different
1581 # ways. If the target system has gdb support then typically
1582 # the exception will be handled by gdb code. Otherwise if the
1583 # HAL exception support is enabled then the HAL will invoke a
1584 # routine deliver_exception(). Typically this routine will be
1585 # provided by the eCos kernel, but it is possible for
1586 # application code to provide its own implementation. If the
1587 # HAL exception support is not enabled and a processor
1588 # exception occurs then the behaviour of the system is
1591 cdl_option CYGPKG_HAL_EXCEPTIONS {
1593 # No user value, uncomment the following line to provide one.
1595 # value_source default
1596 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1597 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1599 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1600 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1604 # Stop calling constructors early
1605 # This option supports environments where some constructors
1606 # must be run in the context of a thread rather than at
1607 # simple system startup time. A boolean flag named
1608 # cyg_hal_stop_constructors is set to 1 when constructors
1609 # should no longer be invoked. It is up to some other
1610 # package to deal with the rest of the constructors.
1611 # In the current version this is only possible with the
1614 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1616 # No user value, uncomment the following line to provide one.
1618 # value_source default
1620 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1621 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1625 # HAL uses the MMU and allows for CDL manipulation of it's use
1627 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1628 # No options implement this inferface
1629 # This value cannot be modified here.
1633 # The following properties are affected by this value
1634 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1635 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1638 # Install MMU tables.
1639 # This option controls whether this application installs
1640 # its own Memory Management Unit (MMU) tables, or relies on the
1641 # existing environment to run.
1643 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1644 # This option is not active
1645 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1646 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1650 # No user value, uncomment the following line to provide one.
1652 # value_source default
1653 # Default value: CYG_HAL_STARTUP != "RAM"
1654 # CYG_HAL_STARTUP == ROMRAM
1657 # The following properties are affected by this value
1658 # option CYGSEM_HAL_STATIC_MMU_TABLES
1659 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1662 # Use static MMU tables.
1663 # This option defines an environment where any Memory
1664 # Management Unit (MMU) tables are constant. Normally used by ROM
1665 # based environments, this provides a way to save RAM usage which
1666 # would otherwise be required for these tables.
1668 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1670 # No user value, uncomment the following line to provide one.
1672 # value_source default
1674 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1675 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1679 # Route diagnostic output to debug channel
1680 # If not inheriting the console setup from the ROM monitor,
1681 # it is possible to redirect diagnostic output to the debug
1682 # channel by enabling this option. Depending on the debugger
1683 # used it may also be necessary to select a mangler for the
1684 # output to be displayed by the debugger.
1686 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1687 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1688 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1690 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1691 # CYGPKG_HAL_ARM == current
1692 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1693 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1694 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1698 # No user value, uncomment the following line to provide one.
1700 # value_source default
1701 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1702 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1703 # CYG_HAL_STARTUP == ROMRAM
1706 # The following properties are affected by this value
1707 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1708 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1712 # Mangler used on diag output
1713 # It is sometimes necessary to mangle (encode) the
1714 # diag ASCII text output in order for it to show up at the
1715 # other end. In particular, GDB may silently ignore raw
1718 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1719 # This option is not active
1720 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1723 # No user value, uncomment the following line to provide one.
1725 # value_source default
1726 # Default value: GDB
1727 # Legal values: "GDB" "None"
1732 # HAL interrupt handling
1733 # A number of configuration options related to interrupt
1734 # handling are common to most or all HAL packages, even though
1735 # the implementations will vary from architecture to
1738 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1739 # There is no associated value.
1743 # Use separate stack for interrupts
1744 # When an interrupt occurs this interrupt can be handled either
1745 # on the current stack or on a separate stack maintained by the
1746 # HAL. Using a separate stack requires a small number of extra
1747 # instructions in the interrupt handling code, but it has the
1748 # advantage that it is no longer necessary to allow extra space
1749 # in every thread stack for the interrupt handlers. The amount
1750 # of extra space required depends on the interrupt handlers
1751 # that are being used.
1753 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1755 # No user value, uncomment the following line to provide one.
1757 # The inferred value should not be edited directly.
1759 # value_source inferred
1762 # The following properties are affected by this value
1763 # package CYGPKG_REDBOOT
1764 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1767 # Interrupt stack size
1768 # This configuration option specifies the stack size in bytes
1769 # for the interrupt stack. Typically this should be a multiple
1770 # of 16, but the exact requirements will vary from architecture
1771 # to architecture. The interrupt stack serves two separate
1772 # purposes. It is used as the stack during system
1773 # initialization. In addition, if the interrupt system is
1774 # configured to use a separate stack then all interrupts will
1775 # be processed on this stack. The exact memory requirements
1776 # will vary from application to application, and will depend
1777 # heavily on whether or not other interrupt-related options,
1778 # for example nested interrupts, are enabled. On most targets,
1779 # in a configuration with no kernel this stack will also be
1780 # the stack used to invoke the application, and must obviously
1781 # be appropriately large in that case.
1783 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1785 # No user value, uncomment the following line to provide one.
1787 # value_source default
1788 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1789 # CYGPKG_KERNEL (unknown) == 0
1791 # Legal values: 128 to 1048576
1794 # Allow nested interrupts
1795 # When an interrupt occurs the HAL interrupt handling code can
1796 # either leave interrupts disabled for the duration of the
1797 # interrupt handling code, or by doing some extra work it can
1798 # reenable interrupts before invoking the interrupt handler and
1799 # thus allow nested interrupts to happen. If all the interrupt
1800 # handlers being used are small and do not involve any loops
1801 # then it is usually better to disallow nested interrupts.
1802 # However if any of the interrupt handlers are more complicated
1803 # than nested interrupts will usually be required.
1805 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1807 # No user value, uncomment the following line to provide one.
1809 # value_source default
1813 # Save minimum context on interrupt
1814 # The HAL interrupt handling code can exploit the calling conventions
1815 # defined for a given architecture to reduce the amount of state
1816 # that has to be saved. Generally this improves performance and
1817 # reduces code size. However it can make source-level debugging
1820 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1822 # No user value, uncomment the following line to provide one.
1824 # The inferred value should not be edited directly.
1826 # value_source inferred
1829 # The following properties are affected by this value
1830 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1831 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1832 # component CYGBLD_BUILD_REDBOOT
1833 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1836 # Chain all interrupts together
1837 # Interrupts can be attached to vectors either singly, or be
1838 # chained together. The latter is necessary if there is no way
1839 # of discovering which device has interrupted without
1840 # inspecting the device itself. It can also reduce the amount
1841 # of RAM needed for interrupt decoding tables and code.
1843 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1845 # No user value, uncomment the following line to provide one.
1847 # value_source default
1851 # Ignore spurious [fleeting] interrupts
1852 # On some hardware, interrupt sources may not be de-bounced or
1853 # de-glitched. Rather than try to handle these interrupts (no
1854 # handling may be possible), this option allows the HAL to simply
1855 # ignore them. In most cases, if the interrupt is real it will
1856 # reoccur in a detectable form.
1858 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1860 # No user value, uncomment the following line to provide one.
1862 # value_source default
1867 # HAL context switch support
1868 # A number of configuration options related to thread contexts
1869 # are common to most or all HAL packages, even though the
1870 # implementations will vary from architecture to architecture.
1872 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1873 # There is no associated value.
1875 # The following properties are affected by this value
1879 # Use minimum thread context
1880 # The thread context switch code can exploit the calling
1881 # conventions defined for a given architecture to reduce the
1882 # amount of state that has to be saved during a context
1883 # switch. Generally this improves performance and reduces
1884 # code size. However it can make source-level debugging more
1887 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1889 # No user value, uncomment the following line to provide one.
1891 # The inferred value should not be edited directly.
1893 # value_source inferred
1896 # The following properties are affected by this value
1897 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1898 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1899 # component CYGBLD_BUILD_REDBOOT
1900 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1904 # Explicit control over cache behaviour
1905 # These options let the default behaviour of the caches
1906 # be easily configurable.
1908 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1909 # There is no associated value.
1913 # Enable DATA cache on startup
1914 # Enabling this option will cause the data cache to be enabled
1915 # as soon as practicable when eCos starts up. One would choose
1916 # to disable this if the data cache cannot safely be turned on,
1917 # such as a case where the cache(s) require additional platform
1920 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1922 # No user value, uncomment the following line to provide one.
1924 # value_source default
1929 # DATA cache mode on startup
1930 # This option controls the mode the cache will be set to
1931 # when enabled on startup.
1933 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1935 # No user value, uncomment the following line to provide one.
1936 # user_value COPYBACK
1937 # value_source default
1938 # Default value: COPYBACK
1939 # Legal values: "COPYBACK" "WRITETHRU"
1943 # Enable INSTRUCTION cache on startup
1944 # Enabling this option will cause the instruction cache to be enabled
1945 # as soon as practicable when eCos starts up. One would choose
1946 # to disable this if the instruction cache cannot safely be turned on,
1947 # such as a case where the cache(s) require additional platform
1950 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1952 # No user value, uncomment the following line to provide one.
1954 # value_source default
1959 # Source-level debugging support
1960 # If the source level debugger gdb is to be used for debugging
1961 # application code then it may be necessary to configure in support
1962 # for this in the HAL.
1964 cdl_component CYGPKG_HAL_DEBUG {
1965 # There is no associated value.
1969 # Support for GDB stubs
1970 # The HAL implements GDB stubs for the target.
1972 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1973 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
1974 # This value cannot be modified here.
1978 # The following properties are affected by this value
1979 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1980 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1981 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1982 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1985 # Include GDB stubs in HAL
1986 # This option causes a set of GDB stubs to be included into the
1987 # system. On some target systems the GDB support will be
1988 # provided by other means, for example by a ROM monitor. On
1989 # other targets, especially when building a ROM-booting system,
1990 # the necessary support has to go into the target library
1991 # itself. When GDB stubs are include in a configuration, HAL
1992 # serial drivers must also be included.
1994 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1995 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1996 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
2000 # No user value, uncomment the following line to provide one.
2002 # The inferred value should not be edited directly.
2004 # value_source inferred
2006 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2007 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2009 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2010 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2012 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2013 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2015 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2016 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2017 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2020 # The following properties are affected by this value
2021 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2022 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2023 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2024 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2025 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2026 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2027 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2028 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2029 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2030 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2031 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2032 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2033 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2034 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2035 # option CYGPKG_HAL_GDB_FILEIO
2036 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2037 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2038 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2039 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2040 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2041 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2042 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2045 # Support for external break support in GDB stubs
2046 # The HAL implements external break (or asynchronous interrupt)
2047 # in the GDB stubs for the target.
2049 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2050 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2051 # This value cannot be modified here.
2055 # The following properties are affected by this value
2056 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2057 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2060 # Include GDB external break support for stubs
2061 # This option causes the GDB stub to add a serial interrupt handler
2062 # which will listen for GDB break packets. This lets you stop the
2063 # target asynchronously when using GDB, usually by hitting Control+C
2064 # or pressing the STOP button. This option differs from
2065 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2066 # GDB stubs are present.
2068 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2069 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2070 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2074 # No user value, uncomment the following line to provide one.
2076 # value_source default
2077 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2078 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2080 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2081 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2084 # The following properties are affected by this value
2085 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2086 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2087 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2088 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2089 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2090 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2093 # Platform does not support CTRLC
2095 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2096 # No options implement this inferface
2097 # This value cannot be modified here.
2101 # The following properties are affected by this value
2102 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2103 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2106 # Include GDB external break support when no stubs
2107 # This option adds an interrupt handler for the GDB serial line
2108 # which will listen for GDB break packets. This lets you stop the
2109 # target asynchronously when using GDB, usually by hitting Control+C
2110 # or pressing the STOP button. This option differs from
2111 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2112 # stubs are NOT present.
2114 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2115 # This option is not active
2116 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2117 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2118 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2120 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2121 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2125 # No user value, uncomment the following line to provide one.
2127 # value_source default
2128 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2129 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2131 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2132 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2135 # The following properties are affected by this value
2136 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2137 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2138 # component CYGBLD_BUILD_REDBOOT
2139 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2142 # Include GDB multi-threading debug support
2143 # This option enables some extra HAL code which is needed
2144 # to support multi-threaded source level debugging.
2146 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2147 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2148 # CYGSEM_HAL_ROM_MONITOR == 1
2149 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2153 # No user value, uncomment the following line to provide one.
2155 # value_source default
2158 # The following properties are affected by this value
2159 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2160 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2161 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2162 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2165 # Number of times to retry sending a $O packet
2166 # This option controls the number of attempts that eCos programs
2167 # will make to send a $O packet to a host GDB process. If it is
2168 # set non-zero, then the target process will attempt to resend the
2169 # $O packet data up to this number of retries. Caution: use of
2170 # this option is not recommended as it can thoroughly confuse the
2173 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2175 # No user value, uncomment the following line to provide one.
2177 # value_source default
2181 # Timeout period for GDB packets
2182 # This option controls the time (in milliseconds) that eCos programs
2183 # will wait for a response when sending packets to a host GDB process.
2184 # If this time elapses, then the packet will be resent, up to some
2185 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2187 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2189 # No user value, uncomment the following line to provide one.
2191 # value_source default
2192 # Default value: 500
2195 # Location of CRC32 table
2196 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2197 # and placed in ROM, or generated at runtime in RAM. Depending on
2198 # your memory constraints, one of these options may be better.
2200 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2202 # No user value, uncomment the following line to provide one.
2204 # value_source default
2205 # Default value: RAM
2206 # Legal values: "ROM" "RAM"
2210 # ROM monitor support
2211 # Support for ROM monitors can be built in to your application.
2212 # It may also be relevant to build your application as a ROM monitor
2213 # itself. Such options are contained here if relevant for your chosen
2214 # platform. The options and ROM monitors available to choose are
2215 # platform-dependent.
2217 cdl_component CYGPKG_HAL_ROM_MONITOR {
2218 # There is no associated value.
2220 # The following properties are affected by this value
2224 # Target has virtual vector support
2226 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2227 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
2228 # This value cannot be modified here.
2232 # The following properties are affected by this value
2233 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2234 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2237 # Target supports baud rate control via vectors
2238 # Whether this target supports the __COMMCTL_GETBAUD
2239 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2241 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2242 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2243 # This value cannot be modified here.
2247 # The following properties are affected by this value
2248 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2249 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2252 # Enable use of virtual vector calling interface
2253 # Virtual vector support allows the HAL to let the ROM
2254 # monitor handle certain operations. The virtual vector table
2255 # defines a calling interface between applications running in
2256 # RAM and the ROM monitor.
2258 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2259 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2260 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2263 # Calculated value: 1
2267 # The following properties are affected by this value
2268 # component CYGBLD_BUILD_REDBOOT
2269 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2270 # package CYGPKG_DEVS_ETH_PHY
2271 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2275 # Inherit console settings from ROM monitor
2276 # When this option is set, the application will inherit
2277 # the console as set up by the ROM monitor. This means
2278 # that the application will use whatever channel and
2279 # mangling style was used by the ROM monitor when
2280 # the application was launched.
2282 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2283 # This option is not active
2284 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2285 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2289 # No user value, uncomment the following line to provide one.
2291 # value_source default
2292 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2293 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2296 # The following properties are affected by this value
2297 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2298 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2299 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2300 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2303 # Debug channel is configurable
2304 # This option is a configuration hint - it is enabled
2305 # when the HAL initialization code will make use
2306 # of the debug channel configuration option.
2308 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2309 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2310 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2314 # The following properties are affected by this value
2315 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2316 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2319 # Console channel is configurable
2320 # This option is a configuration hint - it is enabled
2321 # when the HAL initialization code will make use
2322 # of the console channel configuration option.
2324 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2325 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2326 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2327 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2331 # The following properties are affected by this value
2332 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2333 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2336 # Initialize whole of virtual vector table
2337 # This option will cause the whole of the virtual
2338 # vector table to be initialized with dummy values on
2339 # startup. When this option is enabled, all the
2340 # options below must also be enabled - or the
2341 # table would be empty when the application
2343 # On targets where older ROM monitors without
2344 # virtual vector support may still be in use, it is
2345 # necessary for RAM applictions to initialize the
2346 # table (since all HAL diagnostics and debug IO
2347 # happens via the table).
2349 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2351 # No user value, uncomment the following line to provide one.
2353 # value_source default
2354 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2355 # CYG_HAL_STARTUP == ROMRAM
2356 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2358 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2359 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2361 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2362 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2364 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2365 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2367 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2368 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2370 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2371 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2374 # The following properties are affected by this value
2375 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2376 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2377 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2378 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2379 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2380 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2381 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2382 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2383 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2384 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2385 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2386 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2387 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2388 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2391 # Claim virtual vector table entries by default
2392 # By default most virtual vectors will be claimed by
2393 # RAM startup configurations, meaning that the RAM
2394 # application will provide the services. The
2395 # exception is COMMS support (HAL
2396 # diagnostics/debugging IO) which is left in the
2397 # control of the ROM monitor.
2398 # The reasoning behind this is to get as much of the
2399 # code exercised during regular development so it
2400 # is known to be working the few times a new ROM
2401 # monitor or a ROM production configuration is used
2402 # - COMMS are excluded only by necessity in order to
2403 # avoid breaking an existing debugger connections
2404 # (there may be ways around this).
2405 # For production RAM configurations this option can
2406 # be switched off, causing the appliction to rely on
2407 # the ROM monitor for these services, thus
2408 # saving some space.
2409 # Individual vectors may also be left unclaimed,
2410 # controlled by the below options (meaning that the
2411 # associated service provided by the ROM monitor
2414 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2415 # This option is not active
2416 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2417 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2421 # No user value, uncomment the following line to provide one.
2423 # value_source default
2426 # The following properties are affected by this value
2427 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2428 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2429 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2430 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2431 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2432 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2433 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2434 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2437 # Claim reset virtual vectors
2438 # This option will cause the reset and kill_by_reset
2439 # virtual vectors to be claimed.
2441 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2443 # No user value, uncomment the following line to provide one.
2445 # value_source default
2446 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2447 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2448 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2451 # The following properties are affected by this value
2452 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2453 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2456 # Claim version virtual vectors
2457 # This option will cause the version
2458 # virtual vectors to be claimed.
2460 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2462 # No user value, uncomment the following line to provide one.
2464 # value_source default
2465 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2466 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2470 # Claim delay_us virtual vector
2471 # This option will cause the delay_us
2472 # virtual vector to be claimed.
2474 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2476 # No user value, uncomment the following line to provide one.
2478 # value_source default
2479 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2480 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2481 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2484 # The following properties are affected by this value
2485 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2486 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2489 # Claim cache virtual vectors
2490 # This option will cause the cache virtual vectors
2493 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2495 # No user value, uncomment the following line to provide one.
2497 # value_source default
2498 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2499 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2500 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2503 # The following properties are affected by this value
2504 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2505 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2508 # Claim data virtual vectors
2509 # This option will cause the data virtual vectors
2510 # to be claimed. At present there is only one, used
2511 # by the RedBoot ethernet driver to share diag output.
2513 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2515 # No user value, uncomment the following line to provide one.
2517 # value_source default
2518 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2519 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2520 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2523 # The following properties are affected by this value
2524 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2525 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2528 # Claim comms virtual vectors
2529 # This option will cause the communication tables
2530 # that are part of the virtual vectors mechanism to
2531 # be claimed. Note that doing this may cause an
2532 # existing ROM monitor communication connection to
2533 # be closed. For this reason, the option is disabled
2534 # per default for normal application
2537 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2539 # No user value, uncomment the following line to provide one.
2541 # value_source default
2542 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2543 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2544 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2547 # The following properties are affected by this value
2548 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2549 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2550 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2551 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2552 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2553 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2555 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2558 # Do diagnostic IO via virtual vector table
2559 # All HAL IO happens via the virtual vector table / comm
2560 # tables when those tables are supported by the HAL.
2561 # If so desired, the low-level IO functions can
2562 # still be provided by the RAM application by
2563 # enabling the CLAIM_COMMS option.
2565 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2566 # Calculated value: 1
2570 # The following properties are affected by this value
2571 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2572 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2573 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2574 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2578 # Behave as a ROM monitor
2579 # Enable this option if this program is to be used as a ROM monitor,
2580 # i.e. applications will be loaded into RAM on the TX27 module, and this
2581 # ROM monitor may process exceptions or interrupts generated from the
2582 # application. This enables features such as utilizing a separate
2583 # interrupt stack when exceptions are generated.
2585 cdl_option CYGSEM_HAL_ROM_MONITOR {
2587 # No user value, uncomment the following line to provide one.
2589 # The inferred value should not be edited directly.
2591 # value_source inferred
2593 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2594 # CYG_HAL_STARTUP == ROMRAM
2595 # CYG_HAL_STARTUP == ROMRAM
2598 # The following properties are affected by this value
2599 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2600 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2601 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2602 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2603 # option CYGPRI_REDBOOT_ROM_MONITOR
2604 # Requires: CYGSEM_HAL_ROM_MONITOR
2607 # Work with a ROM monitor
2608 # Support can be enabled for different varieties of ROM monitor.
2609 # This support changes various eCos semantics such as the encoding
2610 # of diagnostic output, or the overriding of hardware interrupt
2612 # Firstly there is "Generic" support which prevents the HAL
2613 # from overriding the hardware vectors that it does not use, to
2614 # instead allow an installed ROM monitor to handle them. This is
2615 # the most basic support which is likely to be common to most
2616 # implementations of ROM monitor.
2617 # "GDB_stubs" provides support when GDB stubs are included in
2618 # the ROM monitor or boot ROM.
2620 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2622 # No user value, uncomment the following line to provide one.
2624 # value_source default
2625 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2626 # CYG_HAL_STARTUP == ROMRAM
2628 # Legal values: "Generic" "GDB_stubs"
2629 # Requires: CYG_HAL_STARTUP == "RAM"
2630 # CYG_HAL_STARTUP == ROMRAM
2633 # The following properties are affected by this value
2634 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2635 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2636 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2637 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2638 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2639 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2640 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2641 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2645 # Platform defined I/O channels.
2646 # Platforms which provide additional I/O channels can implement
2647 # this interface, indicating that the function plf_if_init()
2648 # needs to be called.
2650 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2651 # No options implement this inferface
2652 # This value cannot be modified here.
2657 # Platform IDE I/O support.
2658 # Platforms which provide IDE controllers can implement
2659 # this interface, indicating that IDE I/O macros are
2662 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2663 # No options implement this inferface
2664 # This value cannot be modified here.
2668 # The following properties are affected by this value
2669 # component CYGSEM_REDBOOT_DISK_IDE
2670 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2673 # File I/O operations via GDB
2674 # This option enables support for various file I/O
2675 # operations using the GDB remote protocol to communicate
2676 # with GDB. The operations are then performed on the
2677 # debugging host by proxy. These operations are only
2678 # currently available by using a system call interface
2679 # to RedBoot. This may change in the future.
2681 cdl_option CYGPKG_HAL_GDB_FILEIO {
2682 # This option is not active
2683 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2684 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2688 # No user value, uncomment the following line to provide one.
2690 # value_source default
2692 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2693 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2697 # Build Compiler sanity checking tests
2698 # Enabling this option causes compiler tests to be built.
2700 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2702 # No user value, uncomment the following line to provide one.
2704 # value_source default
2707 # The following properties are affected by this value
2708 # component CYGPKG_HAL_TESTS
2709 # Calculated: "tests/context tests/basic"
2710 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2711 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2712 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2716 # This option specifies the set of tests for the common HAL.
2718 cdl_component CYGPKG_HAL_TESTS {
2719 # Calculated value: "tests/context tests/basic"
2720 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2721 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2722 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2723 # CYGINT_HAL_TESTS_NO_CACHES == 0
2724 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2725 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2727 # Current_value: tests/context tests/basic tests/cache tests/intr
2731 # Interface for cache presence
2732 # Some architectures and/or platforms do not have caches. By
2733 # implementing this interface, these can disable the various
2734 # cache-related tests.
2736 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2737 # No options implement this inferface
2738 # This value cannot be modified here.
2740 # Current value: 0 0
2742 # The following properties are affected by this value
2743 # component CYGPKG_HAL_TESTS
2744 # Calculated: "tests/context tests/basic"
2745 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2746 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2747 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2752 # The ARM architecture HAL package provides generic
2753 # support for this processor architecture. It is also
2754 # necessary to select a specific target platform HAL
2757 cdl_package CYGPKG_HAL_ARM {
2758 # Packages cannot be added or removed, nor can their version be changed,
2759 # simply by editing their value. Instead the appropriate configuration
2760 # should be used to perform these actions.
2762 # This value cannot be modified here.
2764 # Current value: 1 current
2766 # The following properties are affected by this value
2767 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2768 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2769 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2770 # ActiveIf: CYGPKG_HAL_ARM
2774 # The CPU architecture supports THUMB mode
2776 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2777 # No options implement this inferface
2778 # This value cannot be modified here.
2782 # The following properties are affected by this value
2783 # option CYGHWR_THUMB
2784 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2785 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2786 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2789 # Enable Thumb instruction set
2790 # Enable use of the Thumb instruction set.
2792 cdl_option CYGHWR_THUMB {
2793 # This option is not active
2794 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2795 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2799 # No user value, uncomment the following line to provide one.
2801 # value_source default
2804 # The following properties are affected by this value
2805 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2806 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2807 # option CYGBLD_GLOBAL_CFLAGS
2808 # DefaultValue: (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . (CYGBLD_ARM_EABI ? "-mabi=aapcs-linux -msoft-float " : "-mabi=apcs-gnu ") . "-mcpu=arm9 -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
2812 # Use EABI tool-chain to compile eCos.
2814 cdl_option CYGBLD_ARM_EABI {
2816 # No user value, uncomment the following line to provide one.
2818 # value_source default
2821 # The following properties are affected by this value
2822 # option CYGBLD_GLOBAL_COMMAND_PREFIX
2823 # DefaultValue: "arm-926ejs-linux-gnu" . (CYGBLD_ARM_EABI ? "eabi" : "")
2824 # option CYGBLD_GLOBAL_CFLAGS
2825 # DefaultValue: (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . (CYGBLD_ARM_EABI ? "-mabi=aapcs-linux -msoft-float " : "-mabi=apcs-gnu ") . "-mcpu=arm9 -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
2828 # Enable Thumb interworking compiler option
2829 # This option controls the use of -mthumb-interwork in the
2830 # compiler flags. It defaults enabled in Thumb or ROM monitor
2831 # configurations, but can be overridden for reduced memory
2832 # footprint where interworking is not a requirement.
2834 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2835 # This option is not active
2836 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2837 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2841 # No user value, uncomment the following line to provide one.
2843 # value_source default
2844 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2846 # CYGSEM_HAL_ROM_MONITOR == 1
2849 # The following properties are affected by this value
2850 # option CYGBLD_GLOBAL_CFLAGS
2851 # DefaultValue: (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . (CYGBLD_ARM_EABI ? "-mabi=aapcs-linux -msoft-float " : "-mabi=apcs-gnu ") . "-mcpu=arm9 -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
2854 # The platform and architecture supports Big Endian operation
2856 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2857 # No options implement this inferface
2858 # This value cannot be modified here.
2862 # The following properties are affected by this value
2863 # option CYGHWR_HAL_ARM_BIGENDIAN
2864 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2867 # Use big-endian mode
2868 # Use the CPU in big-endian mode.
2870 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2871 # This option is not active
2872 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2873 # CYGINT_HAL_ARM_BIGENDIAN == 0
2877 # No user value, uncomment the following line to provide one.
2879 # value_source default
2883 # The platform uses a processor with an ARM7 core
2885 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2886 # No options implement this inferface
2887 # This value cannot be modified here.
2891 # The following properties are affected by this value
2892 # option CYGHWR_HAL_ARM_CPU_FAMILY
2893 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2894 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2895 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2896 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2898 # option CYGHWR_HAL_ARM_CPU_FAMILY
2899 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2900 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2901 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2902 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2906 # The platform uses a processor with an ARM9 core
2908 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2909 # Implemented by CYGPKG_HAL_ARM_MX27, active, enabled
2910 # This value cannot be modified here.
2914 # The following properties are affected by this value
2915 # option CYGHWR_HAL_ARM_CPU_FAMILY
2916 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2917 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2918 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2919 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2921 # option CYGHWR_HAL_ARM_CPU_FAMILY
2922 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2923 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2924 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2925 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2929 # The platform uses a processor with a StrongARM core
2931 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2932 # No options implement this inferface
2933 # This value cannot be modified here.
2937 # The following properties are affected by this value
2938 # option CYGHWR_HAL_ARM_CPU_FAMILY
2939 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2940 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2941 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2942 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2944 # option CYGHWR_HAL_ARM_CPU_FAMILY
2945 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2946 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2947 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2948 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2952 # The platform uses a processor with a XScale core
2954 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2955 # No options implement this inferface
2956 # This value cannot be modified here.
2960 # The following properties are affected by this value
2961 # option CYGHWR_HAL_ARM_CPU_FAMILY
2962 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2963 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2964 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2965 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2967 # option CYGHWR_HAL_ARM_CPU_FAMILY
2968 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2969 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2970 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2971 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2976 # It is possible to optimize code for different
2977 # ARM CPU families. This option selects which CPU to
2978 # optimize for on boards that support multiple CPU types.
2980 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2982 # No user value, uncomment the following line to provide one.
2984 # value_source default
2985 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2986 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2987 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2988 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2990 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2991 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2992 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2993 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2995 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2996 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2997 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2998 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
3000 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
3001 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
3002 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
3003 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
3006 # Provide diagnostic dump for exceptions
3007 # Print messages about hardware exceptions, including
3008 # raw exception frame dump and register contents.
3010 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
3012 # No user value, uncomment the following line to provide one.
3014 # value_source default
3016 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3017 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3021 # Process all exceptions with the eCos application
3022 # Normal RAM-based programs which do not include GDB stubs
3023 # defer processing of the illegal instruction exception to GDB.
3024 # Setting this options allows the program to explicitly handle
3025 # the illegal instruction exception itself. Note: this will
3026 # prevent the use of GDB to debug the application as breakpoints
3027 # will no longer work.
3029 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3031 # No user value, uncomment the following line to provide one.
3033 # value_source default
3037 # Support GDB thread operations via ICE/Multi-ICE
3038 # Allow GDB to get thread information via the ICE/Multi-ICE
3041 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3043 # No user value, uncomment the following line to provide one.
3045 # value_source default
3047 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3048 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3050 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3051 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3053 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3054 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3058 # Support for 'gprof' callbacks
3059 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3060 # to acquire the interrupt-context PC and SP, when this option is
3063 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3064 # This option is not active
3065 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3066 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3068 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3069 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3070 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3073 # Calculated value: 1
3078 # Accept exceptions and irq's occurring in user mode
3079 # For standalone Redboot based programs running in user mode.
3081 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3083 # No user value, uncomment the following line to provide one.
3085 # value_source default
3089 # Preserve svc spsr before returning to svc mode
3090 # This option secures exception and breakpoint processing
3091 # triggered during execution of application specific SWI
3094 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3096 # No user value, uncomment the following line to provide one.
3098 # value_source default
3104 cdl_option CYGBLD_LINKER_SCRIPT {
3105 # Calculated value: "src/arm.ld"
3107 # Current_value: src/arm.ld
3110 # Implementations of hal_arm_mem_real_region_top()
3112 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3113 # No options implement this inferface
3114 # This value cannot be modified here.
3119 # Freescale SoC architecture
3120 # This HAL variant package provides generic
3121 # support for the Freescale SoC. It is also
3122 # necessary to select a specific target platform HAL
3125 cdl_package CYGPKG_HAL_ARM_MX27 {
3126 # Packages cannot be added or removed, nor can their version be changed,
3127 # simply by editing their value. Instead the appropriate configuration
3128 # should be used to perform these actions.
3130 # This value cannot be modified here.
3132 # Current value: 1 current
3134 # The following properties are affected by this value
3139 # The processor can run at various frequencies.
3140 # These values are expressed in KHz. Note that there are
3141 # several steppings of the rate to run at different
3142 # maximum frequencies. Check the specs to make sure that your
3143 # particular processor can run at the rate you select here.
3145 cdl_option CYGHWR_HAL_ARM_SOC_PLL_REF_CLOCK {
3147 # No user value, uncomment the following line to provide one.
3148 # user_value 26000000
3149 # value_source default
3150 # Default value: 26000000
3151 # Legal values: 26000000 27000000 33554432 32768000
3154 # Processor clock rate
3155 # The processor can run at various frequencies.
3156 # These values are expressed in KHz. Note that there are
3157 # several steppings of the rate to run at different
3158 # maximum frequencies. Check the specs to make sure that your
3159 # particular processor can run at the rate you select here.
3161 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3163 # No user value, uncomment the following line to provide one.
3165 # value_source default
3166 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3167 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 399
3168 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3169 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3171 # Legal values: 266 399
3173 # The following properties are affected by this value
3174 # option CYGOPT_MX27_WORKAROUND_ENGcm11563
3175 # Requires: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK == "399"
3178 # System clock (hclk) rate
3179 # The processor can run at various frequencies.
3180 # These values are expressed in KHz. Note that there are
3181 # several steppings of the rate to run at different
3182 # maximum frequencies. Check the specs to make sure that your
3183 # particular processor can run at the rate you select here.
3185 cdl_option CYGHWR_HAL_ARM_SOC_SYSTEM_CLOCK {
3187 # No user value, uncomment the following line to provide one.
3189 # value_source default
3190 # Default value: 133
3191 # Legal values: 133 100
3194 # Real-time clock constants
3196 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3197 # There is no associated value.
3201 # Real-time clock numerator
3203 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3204 # Calculated value: 1000000000
3206 # Current_value: 1000000000
3209 # Real-time clock denominator
3210 # This option selects the heartbeat rate for the real-time clock.
3211 # The rate is specified in ticks per second. Change this value
3212 # with caution - too high and your system will become saturated
3213 # just handling clock interrupts, too low and some operations
3214 # such as thread scheduling may become sluggish.
3216 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3218 # No user value, uncomment the following line to provide one.
3220 # value_source default
3221 # Default value: 100
3223 # The following properties are affected by this value
3224 # option CYGNUM_HAL_RTC_PERIOD
3225 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3228 # Real-time clock period
3230 cdl_option CYGNUM_HAL_RTC_PERIOD {
3231 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3232 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3234 # Current_value: 36864
3238 # UART1 available as diagnostic/debug channel
3239 # The chip has multiple serial channels which may be
3240 # used for different things on different platforms. This
3241 # interface allows a platform to indicate that the specified
3242 # serial port can be used as a diagnostic and/or debug channel.
3244 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3245 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3246 # This value cannot be modified here.
3250 # The following properties are affected by this value
3253 # UART2 available as diagnostic/debug channel
3254 # The chip has multiple serial channels which may be
3255 # used for different things on different platforms. This
3256 # interface allows a platform to indicate that the specified
3257 # serial port can be used as a diagnostic and/or debug channel.
3259 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3260 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3261 # This value cannot be modified here.
3265 # The following properties are affected by this value
3268 # UART3 available as diagnostic/debug channel
3269 # The chip has multiple serial channels which may be
3270 # used for different things on different platforms. This
3271 # interface allows a platform to indicate that the specified
3272 # serial port can be used as a diagnostic and/or debug channel.
3274 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3275 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3276 # This value cannot be modified here.
3280 # The following properties are affected by this value
3283 # UART4 available as diagnostic/debug channel
3284 # The chip has multiple serial channels which may be
3285 # used for different things on different platforms. This
3286 # interface allows a platform to indicate that the specified
3287 # serial port can be used as a diagnostic and/or debug channel.
3289 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3290 # Implemented by CYGPKG_HAL_ARM_TX27KARO, active, enabled
3291 # This value cannot be modified here.
3295 # The following properties are affected by this value
3298 # UART5 available as diagnostic/debug channel
3299 # The chip has multiple serial channels which may be
3300 # used for different things on different platforms. This
3301 # interface allows a platform to indicate that the specified
3302 # serial port can be used as a diagnostic and/or debug channel.
3304 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3305 # No options implement this inferface
3306 # This value cannot be modified here.
3311 # UART6 available as diagnostic/debug channel
3312 # The chip has multiple serial channels which may be
3313 # used for different things on different platforms. This
3314 # interface allows a platform to indicate that the specified
3315 # serial port can be used as a diagnostic and/or debug channel.
3317 cdl_interface CYGHWR_HAL_ARM_SOC_UART6 {
3318 # No options implement this inferface
3319 # This value cannot be modified here.
3325 # This HAL platform package provides generic
3326 # support for the Ka-Ro electronics TX27 module.
3328 cdl_package CYGPKG_HAL_ARM_TX27KARO {
3329 # Packages cannot be added or removed, nor can their version be changed,
3330 # simply by editing their value. Instead the appropriate configuration
3331 # should be used to perform these actions.
3333 # This value cannot be modified here.
3335 # Current value: 1 current
3336 # Requires: CYGINT_ISO_CTYPE
3337 # CYGINT_ISO_CTYPE == 1
3339 # Requires: CYGBLD_BUILD_REDBOOT == 1
3340 # CYGBLD_BUILD_REDBOOT == 1
3346 # The only startup type allowed is ROMRAM, since this will allow
3347 # the program to exist in ROM, but be copied to RAM during startup
3348 # which is required to boot from NAND flash.
3350 cdl_component CYG_HAL_STARTUP {
3352 # No user value, uncomment the following line to provide one.
3354 # value_source default
3355 # Default value: ROMRAM
3356 # Legal values: "ROMRAM"
3358 # The following properties are affected by this value
3359 # option CYGSEM_HAL_ROM_MONITOR
3360 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3361 # option CYGSEM_HAL_ROM_MONITOR
3362 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3363 # option CYGSEM_HAL_USE_ROM_MONITOR
3364 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3365 # option CYGSEM_HAL_USE_ROM_MONITOR
3366 # Requires: CYG_HAL_STARTUP == "RAM"
3367 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3368 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3369 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3370 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3371 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3372 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3373 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3374 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3375 # option CYGPRI_REDBOOT_ROM_MONITOR
3376 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3377 # option CYGPRI_REDBOOT_ROM_MONITOR
3378 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3381 # Diagnostic serial port baud rate
3382 # This option selects the baud rate used for the console port.
3383 # Note: this should match the value chosen for the GDB port if the
3384 # console and GDB port are the same.
3386 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3388 # No user value, uncomment the following line to provide one.
3390 # value_source default
3391 # Default value: 115200
3392 # Legal values: 9600 19200 38400 57600 115200
3395 # GDB serial port baud rate
3396 # This option selects the baud rate used for the GDB port.
3397 # Note: this should match the value chosen for the console port if the
3398 # console and GDB port are the same.
3400 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3402 # No user value, uncomment the following line to provide one.
3404 # value_source default
3405 # Default value: 115200
3406 # Legal values: 9600 19200 38400 57600 115200
3409 # Number of communication channels on the TX27
3411 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3412 # Calculated value: 3
3416 # The following properties are affected by this value
3417 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3418 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3419 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3420 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3421 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3422 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3426 # The TX27 provides access to three serial ports. This option
3427 # chooses which port will be used to connect to a host
3430 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3431 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3432 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3436 # No user value, uncomment the following line to provide one.
3438 # value_source default
3440 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3441 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3444 # Default console channel.
3446 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3447 # Calculated value: 0
3450 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3451 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3453 # The following properties are affected by this value
3454 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3455 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3458 # Console serial port
3459 # The TX27 provides access to three serial ports. This option
3460 # chooses which port will be used for console output.
3462 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3463 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3464 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3468 # No user value, uncomment the following line to provide one.
3470 # value_source default
3471 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3472 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3474 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3475 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3478 # Ka-Ro electronics TX27 module build options
3479 # Package specific build options including control over
3480 # compiler flags used only in building this package,
3481 # and details of which tests are built.
3483 cdl_component CYGPKG_HAL_ARM_TX27_OPTIONS {
3484 # There is no associated value.
3485 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3486 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3492 # This option specifies the SDRAM size of the TX27 module.
3494 cdl_option CYGNUM_HAL_ARM_TX27_SDRAM_SIZE {
3496 # No user value, uncomment the following line to provide one.
3497 # user_value 0x04000000
3498 # value_source default
3499 # Default value: 0x04000000
3500 # Legal values: 0x04000000 0x08000000
3503 # Enable low level debugging with LED
3504 # This option enables low level debugging by blink codes
3505 # of the LED on STK5.
3507 cdl_option CYGOPT_HAL_ARM_TX27_DEBUG {
3509 # No user value, uncomment the following line to provide one.
3511 # value_source default
3515 # Additional compiler flags
3516 # This option modifies the set of compiler flags for
3517 # building the TX27 HAL. These flags are used in addition
3518 # to the set of global flags.
3520 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_ADD {
3522 # No user value, uncomment the following line to provide one.
3524 # value_source default
3528 # Suppressed compiler flags
3529 # This option modifies the set of compiler flags for
3530 # building the TX27 HAL. These flags are removed from
3531 # the set of global flags if present.
3533 cdl_option CYGPKG_HAL_ARM_TX27_CFLAGS_REMOVE {
3535 # No user value, uncomment the following line to provide one.
3537 # value_source default
3541 # Enable workaround for Erratum ENGcm11563
3542 # This option enables the software workaround for
3543 # ENGcm11563 (ARM core lockup due to invalid
3544 # duty cycle of ARM clock at 399 MHz.
3546 cdl_option CYGOPT_MX27_WORKAROUND_ENGcm11563 {
3548 # No user value, uncomment the following line to provide one.
3550 # value_source default
3552 # Requires: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK == "399"
3553 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK == 399
3560 cdl_component CYGHWR_MEMORY_LAYOUT {
3561 # Calculated value: "arm_tx27_romram"
3563 # Current_value: arm_tx27_romram
3567 # Memory layout linker script fragment
3569 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3570 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.ldi>"
3572 # Current_value: <pkgconf/mlt_arm_tx27_romram.ldi>
3575 # Memory layout header file
3577 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3578 # Calculated value: "<pkgconf/mlt_arm_tx27_romram.h>"
3580 # Current_value: <pkgconf/mlt_arm_tx27_romram.h>
3589 # Common types and useful macros.
3590 # Tracing and assertion facilities.
3591 # Package startup options.
3593 cdl_package CYGPKG_INFRA {
3594 # Packages cannot be added or removed, nor can their version be changed,
3595 # simply by editing their value. Instead the appropriate configuration
3596 # should be used to perform these actions.
3598 # This value cannot be modified here.
3600 # Current value: 1 current
3602 # The following properties are affected by this value
3603 # package CYGPKG_HAL
3604 # Requires: CYGPKG_INFRA
3605 # component CYGBLD_BUILD_REDBOOT
3606 # Requires: CYGPKG_INFRA
3611 # The eCos source code contains a significant amount of
3612 # internal debugging support, in the form of assertions and
3614 # Assertions check at runtime that various conditions are as
3615 # expected; if not, execution is halted.
3616 # Tracing takes the form of text messages that are output
3617 # whenever certain events occur, or whenever functions are
3619 # The most important property of these checks and messages is
3620 # that they are not required for the program to run.
3621 # It is prudent to develop software with assertions enabled,
3622 # but disable them when making a product release, thus
3623 # removing the overhead of that checking.
3624 # It is possible to enable assertions and tracing
3626 # There are also options controlling the exact behaviour of
3627 # the assertion and tracing facilities, thus giving users
3628 # finer control over the code and data size requirements.
3630 cdl_component CYGPKG_INFRA_DEBUG {
3632 # No user value, uncomment the following line to provide one.
3634 # value_source default
3637 # The following properties are affected by this value
3638 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3639 # ActiveIf: CYGPKG_INFRA_DEBUG
3644 # If this option is defined, asserts in the code are tested.
3645 # Assert functions (CYG_ASSERT()) are defined in
3646 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3647 # If it is not defined, these result in no additional
3648 # object code and no checking of the asserted conditions.
3650 cdl_component CYGDBG_USE_ASSERTS {
3651 # This option is not active
3652 # The parent CYGPKG_INFRA_DEBUG is disabled
3655 # No user value, uncomment the following line to provide one.
3657 # value_source default
3659 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3660 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3663 # The following properties are affected by this value
3664 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3665 # Requires: CYGDBG_USE_ASSERTS
3666 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3667 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3672 # This option allows individual control of preconditions.
3673 # A precondition is one type of assert, which it is
3674 # useful to control separately from more general asserts.
3675 # The function is CYG_PRECONDITION(condition,msg).
3677 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3678 # This option is not active
3679 # The parent CYGDBG_USE_ASSERTS is not active
3682 # No user value, uncomment the following line to provide one.
3684 # value_source default
3689 # This option allows individual control of postconditions.
3690 # A postcondition is one type of assert, which it is
3691 # useful to control separately from more general asserts.
3692 # The function is CYG_POSTCONDITION(condition,msg).
3694 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3695 # This option is not active
3696 # The parent CYGDBG_USE_ASSERTS is not active
3699 # No user value, uncomment the following line to provide one.
3701 # value_source default
3706 # This option allows individual control of loop invariants.
3707 # A loop invariant is one type of assert, which it is
3708 # useful to control separately from more general asserts,
3709 # particularly since a loop invariant is typically evaluated
3710 # a great many times when used correctly.
3711 # The function is CYG_LOOP_INVARIANT(condition,msg).
3713 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3714 # This option is not active
3715 # The parent CYGDBG_USE_ASSERTS is not active
3718 # No user value, uncomment the following line to provide one.
3720 # value_source default
3725 # All assertions within eCos contain a text message
3726 # which should give some information about the condition
3728 # These text messages will end up being embedded in the
3729 # application image and hence there is a significant penalty
3730 # in terms of image size.
3731 # It is possible to suppress the use of these messages by
3732 # disabling this option.
3733 # This results in smaller code size, but there is less
3734 # human-readable information if an assertion actually gets
3737 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3738 # This option is not active
3739 # The parent CYGDBG_USE_ASSERTS is not active
3742 # No user value, uncomment the following line to provide one.
3744 # value_source default
3750 # If this option is defined, tracing operations
3751 # result in output or logging, depending on other options.
3752 # This may have adverse effects on performance, if the time
3753 # taken to output message overwhelms the available CPU
3754 # power or output bandwidth.
3755 # Trace functions (CYG_TRACE()) are defined in
3756 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3757 # If it is not defined, these result in no additional
3758 # object code and no trace information.
3760 cdl_component CYGDBG_USE_TRACING {
3761 # This option is not active
3762 # The parent CYGPKG_INFRA_DEBUG is disabled
3765 # No user value, uncomment the following line to provide one.
3767 # value_source default
3769 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3770 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3773 # The following properties are affected by this value
3774 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3775 # ActiveIf: CYGDBG_USE_TRACING
3776 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3777 # ActiveIf: CYGDBG_USE_TRACING
3778 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3779 # ActiveIf: CYGDBG_USE_TRACING
3780 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3781 # ActiveIf: CYGDBG_USE_TRACING
3782 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3783 # ActiveIf: CYGDBG_USE_TRACING
3787 # Trace function reports
3788 # This option allows individual control of
3789 # function entry/exit tracing, independent of
3790 # more general tracing output.
3791 # This may be useful to remove clutter from a
3794 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3795 # This option is not active
3796 # The parent CYGDBG_USE_TRACING is not active
3797 # The parent CYGDBG_USE_TRACING is disabled
3800 # No user value, uncomment the following line to provide one.
3802 # value_source default
3807 # All trace calls within eCos contain a text message
3808 # which should give some information about the circumstances.
3809 # These text messages will end up being embedded in the
3810 # application image and hence there is a significant penalty
3811 # in terms of image size.
3812 # It is possible to suppress the use of these messages by
3813 # disabling this option.
3814 # This results in smaller code size, but there is less
3815 # human-readable information available in the trace output,
3816 # possibly only filenames and line numbers.
3818 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3819 # This option is not active
3820 # The parent CYGDBG_USE_TRACING is not active
3821 # The parent CYGDBG_USE_TRACING is disabled
3824 # No user value, uncomment the following line to provide one.
3826 # value_source default
3831 # Trace output implementations
3833 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3834 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3835 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3836 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3837 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3838 # This option is not active
3839 # The parent CYGPKG_INFRA_DEBUG is disabled
3841 # This value cannot be modified here.
3845 # The following properties are affected by this value
3846 # component CYGDBG_USE_ASSERTS
3847 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3848 # component CYGDBG_USE_TRACING
3849 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3853 # A null output module which is useful when
3854 # debugging interactively; the output routines
3855 # can be breakpointed rather than have them actually
3856 # 'print' something.
3858 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3859 # This option is not active
3860 # The parent CYGPKG_INFRA_DEBUG is disabled
3863 # No user value, uncomment the following line to provide one.
3865 # value_source default
3870 # An output module which produces simple output
3871 # from tracing and assertion events.
3873 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3874 # This option is not active
3875 # The parent CYGPKG_INFRA_DEBUG is disabled
3878 # No user value, uncomment the following line to provide one.
3880 # value_source default
3885 # An output module which produces fancy output
3886 # from tracing and assertion events.
3888 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3889 # This option is not active
3890 # The parent CYGPKG_INFRA_DEBUG is disabled
3893 # No user value, uncomment the following line to provide one.
3895 # value_source default
3900 # An output module which buffers output
3901 # from tracing and assertion events. The stored
3902 # messages are output when an assert fires, or
3903 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3905 # Of course, there will only be stored messages
3906 # if tracing per se (CYGDBG_USE_TRACING)
3909 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3910 # This option is not active
3911 # The parent CYGPKG_INFRA_DEBUG is disabled
3914 # No user value, uncomment the following line to provide one.
3916 # value_source default
3922 # The size of the trace buffer. This counts the number
3923 # of trace records stored. When the buffer fills it
3924 # either wraps, stops recording, or generates output.
3926 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3927 # This option is not active
3928 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3929 # ActiveIf constraint: CYGDBG_USE_TRACING
3930 # CYGDBG_USE_TRACING == 0
3934 # No user value, uncomment the following line to provide one.
3936 # value_source default
3938 # Legal values: 5 to 65535
3941 # Wrap trace buffer when full
3942 # When the trace buffer has filled with records it
3943 # starts again at the beginning. Hence only the last
3944 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3947 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3948 # This option is not active
3949 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3950 # ActiveIf constraint: CYGDBG_USE_TRACING
3951 # CYGDBG_USE_TRACING == 0
3955 # No user value, uncomment the following line to provide one.
3957 # value_source default
3961 # Halt trace buffer when full
3962 # When the trace buffer has filled with records it
3963 # stops recording. Hence only the first
3964 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3967 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3968 # This option is not active
3969 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3970 # ActiveIf constraint: CYGDBG_USE_TRACING
3971 # CYGDBG_USE_TRACING == 0
3975 # No user value, uncomment the following line to provide one.
3977 # value_source default
3981 # Print trace buffer when full
3982 # When the trace buffer has filled with records it
3983 # prints the contents of the buffer. The buffer is then
3984 # emptied and the system continues.
3986 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3987 # This option is not active
3988 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3989 # ActiveIf constraint: CYGDBG_USE_TRACING
3990 # CYGDBG_USE_TRACING == 0
3994 # No user value, uncomment the following line to provide one.
3996 # value_source default
4000 # Print trace buffer on assert fail
4001 # When an assertion fails the trace buffer will be
4002 # printed to the default diagnostic device.
4004 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
4005 # This option is not active
4006 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
4007 # ActiveIf constraint: CYGDBG_USE_TRACING
4008 # CYGDBG_USE_TRACING == 0
4012 # No user value, uncomment the following line to provide one.
4014 # value_source default
4019 # Use function names
4020 # All trace and assert calls within eCos contain a
4021 # reference to the builtin macro '__PRETTY_FUNCTION__',
4022 # which evaluates to a string containing
4023 # the name of the current function.
4024 # This is useful when reading a trace log.
4025 # It is possible to suppress the use of the function name
4026 # by disabling this option.
4027 # This results in smaller code size, but there is less
4028 # human-readable information available in the trace output,
4029 # possibly only filenames and line numbers.
4031 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4032 # This option is not active
4033 # The parent CYGPKG_INFRA_DEBUG is disabled
4036 # No user value, uncomment the following line to provide one.
4038 # value_source default
4044 # Some packages require a startup routine to be called.
4045 # This can be carried out by application code, by supplying
4046 # a routine called cyg_package_start() which calls the
4047 # appropriate package startup routine(s).
4048 # Alternatively, this routine can be constructed automatically
4049 # and configured to call the startup routines of your choice.
4051 cdl_component CYGPKG_INFRA_STARTUP {
4052 # There is no associated value.
4056 # Start uITRON subsystem
4057 # Generate a call to initialize the
4058 # uITRON compatibility subsystem
4059 # within the system version of cyg_package_start().
4060 # This enables compatibility with uITRON.
4061 # You must configure uITRON with the correct tasks before
4062 # starting the uItron subsystem.
4063 # If this is disabled, and you want to use uITRON,
4064 # you must call cyg_uitron_start() from your own
4065 # cyg_package_start() or cyg_userstart().
4067 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4068 # This option is not active
4069 # ActiveIf constraint: CYGPKG_UITRON
4070 # CYGPKG_UITRON (unknown) == 0
4074 # No user value, uncomment the following line to provide one.
4076 # value_source default
4078 # Requires: CYGPKG_UITRON
4079 # CYGPKG_UITRON (unknown) == 0
4084 # Smaller slower memcpy()
4085 # Enabling this option causes the implementation of
4086 # the standard memcpy() routine to reduce code
4087 # size at the expense of execution speed. This
4088 # option is automatically enabled with the use of
4089 # the -Os option to the compiler. Also note that
4090 # the compiler will try to use its own builtin
4091 # version of memcpy() if possible, ignoring the
4092 # implementation in this package, unless given
4093 # the -fno-builtin compiler option.
4095 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4097 # No user value, uncomment the following line to provide one.
4099 # value_source default
4103 # Smaller slower memset()
4104 # Enabling this option causes the implementation of
4105 # the standard memset() routine to reduce code
4106 # size at the expense of execution speed. This
4107 # option is automatically enabled with the use of
4108 # the -Os option to the compiler. Also note that
4109 # the compiler will try to use its own builtin
4110 # version of memset() if possible, ignoring the
4111 # implementation in this package, unless given
4112 # the -fno-builtin compiler option.
4114 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4116 # No user value, uncomment the following line to provide one.
4118 # value_source default
4122 # Provide empty C++ delete functions
4123 # To deal with virtual destructors, where the correct delete()
4124 # function must be called for the derived class in question, the
4125 # underlying delete is called when needed, from destructors. This
4126 # is regardless of whether the destructor is called by delete itself.
4127 # So there is a reference to delete() from all destructors. The
4128 # default builtin delete() attempts to call free() if there is
4129 # one defined. So, if you have destructors, and you have free(),
4130 # as in malloc() and free(), any destructor counts as a reference
4131 # to free(). So the dynamic memory allocation code is linked
4132 # in regardless of whether it gets explicitly called. This
4133 # increases code and data size needlessly.
4134 # To defeat this undesirable behaviour, we define empty versions
4135 # of delete and delete. But doing this prevents proper use
4136 # of dynamic memory in C++ programs via C++'s new and delete
4138 # Therefore, this option is provided
4139 # for explicitly disabling the provision of these empty functions,
4140 # so that new and delete can be used, if that is what is required.
4142 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4144 # No user value, uncomment the following line to provide one.
4146 # value_source default
4150 # Threshold for valid number of delete calls
4151 # Some users don't know about the empty delete function and then
4152 # wonder why their C++ classes are leaking memory. If
4153 # INFRA_DEBUG is enabled we keep a counter for the number of
4154 # times delete is called. If it goes above this threshold we throw
4155 # an assertion failure. This should point heavy users of
4156 # delete in the right direction without upsetting those who want
4157 # an empty delete function.
4159 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4160 # This option is not active
4161 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4162 # CYGPKG_INFRA_DEBUG == 0
4166 # No user value, uncomment the following line to provide one.
4168 # value_source default
4169 # Default value: 100
4172 # Provide dummy abort() function
4173 # This option controls the inclusion of a dummy abort() function.
4174 # Parts of the C and C++ compiler runtime systems contain references
4175 # to abort(), particulary in the C++ exception handling code. It is
4176 # not possible to eliminate these references, so this dummy function
4177 # in included to satisfy them. It is not expected that this function
4178 # will ever be called, so its current behaviour is to simply loop.
4180 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4182 # No user value, uncomment the following line to provide one.
4184 # value_source default
4185 # Default value: CYGINT_ISO_EXIT == 0
4186 # CYGINT_ISO_EXIT == 0
4188 # Requires: !CYGINT_ISO_EXIT
4189 # CYGINT_ISO_EXIT == 0
4193 # Reset platform at end of test case execution
4194 # If this option is set then test case programs will reset the platform
4195 # when they terminate, as opposed to the default which is to just hang
4198 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4200 # No user value, uncomment the following line to provide one.
4202 # value_source default
4206 # Provide dummy strlen() function
4207 # This option controls the inclusion of a dummy strlen() function.
4208 # Parts of the C and C++ compiler runtime systems contain references
4209 # to strlen(), particulary in the C++ exception handling code. It is
4210 # not possible to eliminate these references, so this dummy function
4211 # in included to satisfy them. While it is not expected that this function
4212 # will ever be called, it is functional but uses the simplest, smallest
4213 # algorithm. There is a faster version of strlen() in the C library.
4215 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4217 # No user value, uncomment the following line to provide one.
4219 # value_source default
4220 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4221 # CYGINT_ISO_STRING_STRFUNCS == 1
4223 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4224 # CYGINT_ISO_STRING_STRFUNCS == 1
4228 # Make all compiler warnings show as errors
4229 # Enabling this option will cause all compiler warnings to show
4230 # as errors and bring the library build to a halt. This is used
4231 # to ensure that the code base is warning free, and thus ensure
4232 # that newly introduced warnings stand out and get fixed before
4233 # they show up as weird run-time behavior.
4235 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4240 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4241 # CYGBLD_GLOBAL_CFLAGS == "-mabi=aapcs-linux -msoft-float -mcpu=arm9 -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4244 # The following properties are affected by this value
4245 # option CYGBLD_GLOBAL_CFLAGS
4246 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4249 # Make compiler and assembler communicate by pipe
4250 # Enabling this option will cause the compiler to feed the
4251 # assembly output the the assembler via a pipe instead of
4252 # via a temporary file. This normally reduces the build
4255 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4260 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4261 # CYGBLD_GLOBAL_CFLAGS == "-mabi=aapcs-linux -msoft-float -mcpu=arm9 -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4265 # Infra build options
4266 # Package specific build options including control over
4267 # compiler flags used only in building this package.
4269 cdl_component CYGPKG_INFRA_OPTIONS {
4270 # There is no associated value.
4274 # Additional compiler flags
4275 # This option modifies the set of compiler flags for
4276 # building the eCos infra package. These flags are used
4277 # in addition to the set of global flags.
4279 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4281 # No user value, uncomment the following line to provide one.
4282 # user_value "-fno-rtti -Woverloaded-virtual"
4283 # value_source default
4284 # Default value: "-fno-rtti -Woverloaded-virtual"
4287 # Suppressed compiler flags
4288 # This option modifies the set of compiler flags for
4289 # building the eCos infra package. These flags are removed from
4290 # the set of global flags if present.
4292 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4294 # No user value, uncomment the following line to provide one.
4295 # user_value -Wno-pointer-sign
4296 # value_source default
4297 # Default value: -Wno-pointer-sign
4300 # Suppressed linker flags
4301 # This option modifies the set of linker flags for
4302 # building the eCos infra package tests. These flags are removed from
4303 # the set of global flags if present.
4305 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4307 # No user value, uncomment the following line to provide one.
4308 # user_value -Wl,--gc-sections
4309 # value_source default
4310 # Default value: -Wl,--gc-sections
4313 # Additional linker flags
4314 # This option modifies the set of linker flags for
4315 # building the eCos infra package tests. These flags are added to
4316 # the set of global flags if present.
4318 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4320 # No user value, uncomment the following line to provide one.
4321 # user_value -Wl,--fatal-warnings
4322 # value_source default
4323 # Default value: -Wl,--fatal-warnings
4326 # Infra package tests
4328 cdl_component CYGPKG_INFRA_TESTS {
4329 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4331 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4335 # Number of times a test runs
4336 # This option controls the number of times tests will execute their
4337 # basic function. Not all tests will honor this setting, but those
4338 # that do will execute the test N times before terminating. A value
4339 # less than 0 indicates to run forever.
4341 cdl_option CYGNUM_TESTS_RUN_COUNT {
4343 # No user value, uncomment the following line to provide one.
4345 # value_source default
4352 # Redboot ROM monitor
4353 # doc: ref/redboot.html
4354 # This package supports the Redboot [stand-alone debug monitor]
4355 # using eCos as the underlying board support mechanism.
4357 cdl_package CYGPKG_REDBOOT {
4358 # Packages cannot be added or removed, nor can their version be changed,
4359 # simply by editing their value. Instead the appropriate configuration
4360 # should be used to perform these actions.
4362 # This value cannot be modified here.
4364 # Current value: 1 current
4365 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4366 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4369 # The following properties are affected by this value
4370 # component CYGPKG_REDBOOT_ARM_OPTIONS
4371 # ActiveIf: CYGPKG_REDBOOT
4372 # component CYGPKG_REDBOOT_HAL_OPTIONS
4373 # ActiveIf: CYGPKG_REDBOOT
4374 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
4375 # ActiveIf: CYGPKG_REDBOOT
4376 # option CYGSEM_IO_ETH_DRIVERS_WARN
4377 # ActiveIf: CYGPKG_REDBOOT
4381 # Include support for ELF file format
4383 cdl_component CYGSEM_REDBOOT_ELF {
4385 # No user value, uncomment the following line to provide one.
4387 # value_source default
4392 # Use the virtual address in the ELF headers
4393 # The ELF headers contain both a virtual and a physical address
4394 # for where code/data should be loaded. By default the physical
4395 # address is used but sometimes it is necassary to use the
4396 # virtual address because of bugy toolchains
4398 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4400 # No user value, uncomment the following line to provide one.
4402 # value_source default
4407 # Methods of loading images using redboot
4409 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4410 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4411 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4412 # This value cannot be modified here.
4416 # The following properties are affected by this value
4417 # component CYGBLD_BUILD_REDBOOT
4418 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4421 # Build Redboot ROM ELF image
4422 # This option enables the building of the Redboot ELF image.
4423 # The image may require further relocation or symbol
4424 # stripping before being converted to a binary image.
4425 # This is handled by a rule in the target CDL.
4427 cdl_component CYGBLD_BUILD_REDBOOT {
4429 # No user value, uncomment the following line to provide one.
4431 # The inferred value should not be edited directly.
4433 # value_source inferred
4435 # Requires: CYGPKG_INFRA
4436 # CYGPKG_INFRA == current
4438 # Requires: CYGPKG_ISOINFRA
4439 # CYGPKG_ISOINFRA == current
4441 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4442 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4444 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4445 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4447 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4448 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4450 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4451 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4453 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4454 # CYGINT_ISO_STRING_MEMFUNCS == 1
4456 # Requires: CYGINT_ISO_STRING_STRFUNCS
4457 # CYGINT_ISO_STRING_STRFUNCS == 1
4459 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4460 # CYGINT_REDBOOT_LOAD_METHOD == 2
4463 # The following properties are affected by this value
4464 # package CYGPKG_HAL_ARM_TX27KARO
4465 # Requires: CYGBLD_BUILD_REDBOOT == 1
4466 # option CYGBLD_BUILD_REDBOOT_BIN
4467 # ActiveIf: CYGBLD_BUILD_REDBOOT
4471 # Include GDB support in RedBoot
4472 # RedBoot normally includes support for the GDB debugging
4473 # protocols. This option allows this to be disabled which
4474 # may yield a substantial savings in terms of code and memory
4477 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4478 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4479 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4486 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4487 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4489 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4490 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4494 # Threads debugging support
4495 # Enabling this option will include special code in the
4496 # GDB stubs to support debugging of threaded programs. In
4497 # the case of eCos programs, this support allows GDB to
4498 # have complete access to the eCos threads in the
4501 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4502 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4503 # CYG_HAL_STARTUP == ROMRAM
4507 # No user value, uncomment the following line to provide one.
4509 # value_source default
4511 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4512 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4516 # Customized version string
4517 # Use this option to define a customized version "string" for
4518 # RedBoot. Note: this value is only cosmetic, displayed by the
4519 # "version" command, but is useful for providing site specific
4520 # information about the RedBoot configuration.
4522 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4524 # No user value, uncomment the following line to provide one.
4526 # The inferred value should not be edited directly.
4527 inferred_value 1 "Ka-Ro 2009-06-10"
4528 # value_source inferred
4529 # Default value: 0 0
4532 # Enable command line editing
4533 # If this option is non-zero, RedBoot will remember the
4534 # last N command lines. These lines may be reused.
4535 # Enabling this history will also enable rudimentary
4536 # editting of the lines themselves.
4538 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4540 # No user value, uncomment the following line to provide one.
4542 # value_source default
4545 # The following properties are affected by this value
4546 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4547 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4548 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4549 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4552 # Enable command line editing using ANSI arrows, etc
4553 # If this option is enabled, RedBoot will accept standard ANSI key
4554 # sequences for cursor movement (along with the emacs style keys).
4556 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4557 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4558 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4562 # No user value, uncomment the following line to provide one.
4564 # value_source default
4568 # Enable history command and expansion
4569 # Enabling this option will allow RedBoot to provide a
4570 # history command to list previous commands. Also enables
4571 # history expansion via '!' character similar to bash
4574 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4576 # No user value, uncomment the following line to provide one.
4578 # value_source default
4580 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4581 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4585 # Number of unique RAM segments on platform
4586 # Change this option to be the number of memory segments which are
4587 # supported by the platform. If the value is greater than 1, then
4588 # a platform specific function must provide information about the
4589 # additional segments.
4591 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4593 # No user value, uncomment the following line to provide one.
4595 # value_source default
4599 # Include support gzip/zlib decompression
4601 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4602 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4603 # CYGPKG_COMPRESS_ZLIB == current
4607 # No user value, uncomment the following line to provide one.
4609 # value_source default
4612 # The following properties are affected by this value
4613 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4614 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4618 # Size of zlib decompression buffer
4619 # This is the size of the buffer filled with incoming data
4620 # during load before calls are made to the decompressor
4621 # function. For ethernet downloads this can be made bigger
4622 # (at the cost of memory), but for serial downloads on slow
4623 # processors it may be necessary to reduce the size to
4624 # avoid serial overruns. zlib appears to bail out if less
4625 # than five bytes are available initially so this is the
4628 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4630 # No user value, uncomment the following line to provide one.
4632 # value_source default
4634 # Legal values: 5 to 256
4637 # Support compression of Flash images
4638 # This CDL indicates whether flash images can
4639 # be decompressed from gzip/zlib format into RAM.
4641 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4642 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4643 # CYGPKG_REDBOOT_FLASH == 1
4645 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4646 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4647 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4650 # Calculated value: 1
4655 # Include GZIP uncompress command
4656 # Enable this option to include a 'gunzip' command
4657 # to uncompress GZIP compressed data.
4659 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4661 # No user value, uncomment the following line to provide one.
4663 # value_source default
4667 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4668 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4670 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4672 # No user value, uncomment the following line to provide one.
4674 # The inferred value should not be edited directly.
4676 # value_source inferred
4679 # The following properties are affected by this value
4680 # option CYGPRI_REDBOOT_ZLIB_FLASH
4681 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4685 # Include support for xyzModem downloads
4686 # doc: ref/download-command.html
4688 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4690 # No user value, uncomment the following line to provide one.
4692 # value_source default
4695 # The following properties are affected by this value
4696 # option CYGPKG_REDBOOT_CFLAGS_ADD
4697 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4700 # Additional compiler flags
4701 # This option modifies the set of compiler flags for
4702 # building the eCos infra package. These flags are used
4703 # in addition to the set of global flags.
4705 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4706 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4707 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4711 # No user value, uncomment the following line to provide one.
4712 # user_value -Wno-inline
4713 # value_source default
4714 # Default value: -Wno-inline
4717 # Allow the load-command write into Flash.
4718 # Write images direct to Flash via the load command.
4719 # We assume anything which is invalid RAM is flash, hence
4720 # the requires statement
4722 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4723 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4724 # CYGPKG_REDBOOT_FLASH == 1
4728 # No user value, uncomment the following line to provide one.
4730 # value_source default
4732 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4733 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4737 # Include MS Windows CE support
4738 # doc: ref/wince.html
4739 # This option enables MS Windows CE EShell support
4740 # and Windows CE .BIN images support
4742 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4749 # Include support for MXC USB downloads
4751 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4753 # No user value, uncomment the following line to provide one.
4755 # value_source default
4759 # Include support for i.MX USB OTG downloads
4761 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4763 # No user value, uncomment the following line to provide one.
4765 # value_source default
4769 # Include POSIX checksum command
4770 # doc: ref/cksum-command.html
4772 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4774 # No user value, uncomment the following line to provide one.
4776 # value_source default
4780 # Include memory fill command
4781 # doc: ref/mfill-command.html
4783 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4785 # No user value, uncomment the following line to provide one.
4787 # value_source default
4791 # Include memory compare command
4792 # doc: ref/mcmp-command.html
4794 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4796 # No user value, uncomment the following line to provide one.
4798 # value_source default
4802 # Include memory copy command
4803 # doc: ref/mcopy-command.html
4805 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4807 # No user value, uncomment the following line to provide one.
4809 # value_source default
4813 # Include memory dump command
4814 # doc: ref/dump-command.html
4816 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4818 # No user value, uncomment the following line to provide one.
4820 # value_source default
4824 # Include cache command
4825 # doc: ref/cache-command.html
4827 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4829 # No user value, uncomment the following line to provide one.
4831 # value_source default
4835 # Include exec command
4836 # doc: ref/exec-command.html
4838 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4840 # No user value, uncomment the following line to provide one.
4842 # value_source default
4845 # The following properties are affected by this value
4846 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4847 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4850 # Include I/O Memory commands 'iopeek' and 'iopoke'
4852 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4854 # No user value, uncomment the following line to provide one.
4856 # value_source default
4860 # Granularity of timer/ticks
4861 # This option controls the granularity of the timers.
4862 # Faster CPUs can afford higher granularity (lower values)
4863 # which should give higher network performance since the stack
4866 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4868 # No user value, uncomment the following line to provide one.
4870 # value_source default
4871 # Default value: 250
4872 # Legal values: 10 25 50 100 250 500 1000
4875 # Redboot Networking
4876 # This option includes networking support in RedBoot.
4878 cdl_component CYGPKG_REDBOOT_NETWORKING {
4879 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4880 # CYGPKG_IO_ETH_DRIVERS == current
4884 # No user value, uncomment the following line to provide one.
4886 # value_source default
4889 # The following properties are affected by this value
4890 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4891 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4895 # Print net debug information
4896 # This option is overriden by the configuration stored
4899 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4901 # No user value, uncomment the following line to provide one.
4903 # value_source default
4907 # Support TFTP for download
4908 # This option enables the use of the TFTP protocol for
4911 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4913 # No user value, uncomment the following line to provide one.
4915 # value_source default
4919 # Support HTTP for download
4920 # This option enables the use of the HTTP protocol for
4923 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4930 # Default IP address
4931 # This IP address is the default used by RedBoot if
4932 # a BOOTP/DHCP server does not respond. The numbers
4933 # should be separated by *commas*, and not dots. If
4934 # an IP address is configured into the Flash
4935 # configuration, that will be used in preference.
4937 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4939 # No user value, uncomment the following line to provide one.
4941 # value_source default
4942 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4943 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4948 # Do not try to use BOOTP
4949 # By default Redboot tries to use BOOTP to get an IP
4950 # address. If there's no BOOTP server on your network
4951 # use this option to avoid to wait until the
4952 # timeout. This option is overriden by the
4953 # configuration stored in flash.
4955 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4956 # This option is not active
4957 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4960 # No user value, uncomment the following line to provide one.
4962 # value_source default
4966 # Default bootp server
4967 # This IP address is the default server
4968 # address used by RedBoot if a BOOTP/DHCP
4969 # server does not respond. The numbers should
4970 # be separated by *commas*, and not dots. If
4971 # an IP address is configured into the Flash
4972 # configuration, that will be used in
4975 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4976 # This option is not active
4977 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4980 # No user value, uncomment the following line to provide one.
4982 # value_source default
4983 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4984 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4989 # Use DHCP to get IP information
4990 # Use DHCP protocol to obtain pertinent IP addresses, such
4991 # as the client, server, gateway, etc.
4993 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4995 # No user value, uncomment the following line to provide one.
4997 # value_source default
5000 # The following properties are affected by this value
5001 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
5002 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5005 # Use a gateway for non-local IP traffic
5006 # Enabling this option will allow the RedBoot networking
5007 # stack to use a [single] gateway to reach a non-local
5008 # IP address. If disabled, RedBoot will only be able to
5009 # reach nodes on the same subnet.
5011 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
5013 # No user value, uncomment the following line to provide one.
5015 # value_source default
5017 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
5018 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
5023 # Default gateway IP address
5024 # This IP address is the default used by RedBoot
5025 # if a BOOTP/DHCP server does not respond. The
5026 # numbers should be separated by *commas*, and
5027 # not dots. If an IP address is configured into
5028 # the Flash configuration, that will be used in
5031 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5033 # No user value, uncomment the following line to provide one.
5035 # value_source default
5036 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5037 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5041 # Default IP address mask
5042 # This IP address mask is the default used by
5043 # RedBoot if a BOOTP/DHCP server does not
5044 # respond. The numbers should be separated by
5045 # *commas*, and not dots. If an IP address is
5046 # configured into the Flash configuration, that
5047 # will be used in preference.
5049 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5051 # No user value, uncomment the following line to provide one.
5053 # value_source default
5054 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5055 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5060 # TCP port to listen for incoming connections
5061 # RedBoot will 'listen' on this port for incoming TCP
5062 # connections. This allows outside connections to be made
5063 # to the platform, either for GDB or RedBoot commands.
5065 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5067 # No user value, uncomment the following line to provide one.
5069 # value_source default
5070 # Default value: 9000
5073 # Number of [network] packet buffers
5074 # RedBoot may need to buffer network data to support
5075 # various connections. This option allows control
5076 # over the number of such buffered packets, and in
5077 # turn, controls the amount of memory used by RedBoot
5078 # (which is not available to user applications).
5079 # Each packet buffer takes up about 1514 bytes.
5080 # Note: there is little need to make this larger than
5083 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5085 # No user value, uncomment the following line to provide one.
5087 # value_source default
5089 # Legal values: 3 to 8
5093 # When this option is enabled, RedBoot will be built with
5094 # support for DNS, allowing use of hostnames on the command
5097 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5098 # This option is not active
5099 # ActiveIf constraint: CYGPKG_NS_DNS
5100 # CYGPKG_NS_DNS (unknown) == 0
5104 # No user value, uncomment the following line to provide one.
5106 # value_source default
5108 # Requires: !CYGPKG_NS_DNS_BUILD
5109 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5115 # This option sets the IP of the default DNS. The IP can be
5116 # changed at runtime as well.
5118 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5119 # This option is not active
5120 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5121 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5122 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5126 # No user value, uncomment the following line to provide one.
5127 # user_value 0.0.0.0
5128 # value_source default
5129 # Default value: 0.0.0.0
5132 # Timeout in DNS lookup
5133 # This option sets the timeout used when looking up an
5134 # address via the DNS. Default is 10 seconds.
5136 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5137 # This option is not active
5138 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5141 # No user value, uncomment the following line to provide one.
5143 # value_source default
5147 # Support the use of a domain name
5148 # This option controls if Redboot supports domain
5149 # names when performing DNS lookups
5151 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5152 # This option is not active
5153 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5156 # No user value, uncomment the following line to provide one.
5158 # value_source default
5163 # Default DNS domain
5164 # This option sets the default DNS domain name.
5165 # This value will be overwritten by the value in
5166 # flash or a domain returned by DHCP
5168 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5169 # This option is not active
5170 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5171 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5174 # No user value, uncomment the following line to provide one.
5176 # value_source default
5177 # Default value: 0 0
5180 # Get DNS domain from Flash
5181 # This option enables getting the domain name
5182 # from the flash configuration. This can later be
5183 # overwritten by a value learnt from DHCP
5185 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5186 # This option is not active
5187 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5188 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5189 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5190 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5194 # No user value, uncomment the following line to provide one.
5196 # value_source default
5200 # Use DNS domain from DHCP
5201 # This option enables the use of the domain name
5204 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5205 # This option is not active
5206 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5207 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5210 # No user value, uncomment the following line to provide one.
5212 # value_source default
5216 # BOOTP/DHCP DNS domain buffer size
5217 # This options sets the size of the static
5218 # buffer used by BOOTP/DHCP to store the DNS
5219 # domain name. The domain name will not be
5220 # set if the buffer is too small to hold it.
5222 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5223 # This option is not active
5224 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5225 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5228 # No user value, uncomment the following line to provide one.
5230 # value_source default
5236 # Default network device driver
5237 # This is the name of the default network device to use.
5239 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5240 # This option is not active
5241 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5242 # CYGHWR_NET_DRIVERS == 1
5246 # No user value, uncomment the following line to provide one.
5248 # value_source default
5249 # Default value: "\"\""
5252 # Initialize only one net device
5253 # This option tells RedBoot to stop initializing network
5254 # devices when it finds the first device which is
5255 # successfully initialized. The default behavior causes
5256 # all network devices to be initialized.
5258 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5259 # This option is not active
5260 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5261 # CYGHWR_NET_DRIVERS == 1
5265 # No user value, uncomment the following line to provide one.
5267 # value_source default
5272 # Let RedBoot use any I/O channel for its console.
5273 # If this option is enabled then RedBoot will attempt to use all
5274 # defined serial I/O channels for its console device. Once input
5275 # arrives at one of these channels then the console will use only
5278 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5280 # No user value, uncomment the following line to provide one.
5282 # The inferred value should not be edited directly.
5284 # value_source inferred
5288 # Let RedBoot adjust the baud rate of the serial console.
5289 # If this option is enabled then RedBoot will support commands
5290 # to set and query the baud rate on the selected console.
5292 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5293 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5294 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5298 # No user value, uncomment the following line to provide one.
5300 # value_source default
5304 # Run a platform specific startup function.
5305 # If this option is enabled then RedBoot will execute a platform
5306 # specific startup function before entering into its command line
5307 # processing. This allows the platform to perform any special
5308 # setups before RedBoot actually starts running. Note: the entire
5309 # RedBoot environment will already be initialized at this point.
5311 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5313 # No user value, uncomment the following line to provide one.
5315 # value_source default
5319 # Run a platform specific ESA validation function.
5320 # If this option is enabled then RedBoot will execute a platform
5321 # specific function to validate an ethernet ESA. This would be
5322 # useful if the address must conform to standards set by the
5323 # hardware manufacturer, etc.
5325 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5327 # No user value, uncomment the following line to provide one.
5329 # The inferred value should not be edited directly.
5331 # value_source inferred
5334 # The following properties are affected by this value
5335 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5336 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5337 # option CYGDAT_DEVS_ETH_ARM_TX27KARO_OUI
5338 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5341 # Maximum command line length
5342 # This option allows control over how long the CLI command line
5343 # should be. This space will be allocated statically
5344 # rather than from RedBoot's stack.
5346 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5348 # No user value, uncomment the following line to provide one.
5350 # The inferred value should not be edited directly.
5352 # value_source inferred
5353 # Default value: 256
5356 # Command processing idle timeout (ms)
5357 # This option controls the timeout period before the
5358 # command processing is considered 'idle'. Making this
5359 # number smaller will cause idle processing to take place
5360 # more often, etc. The default value of 10ms is a reasonable
5361 # tradeoff between responsiveness and overhead.
5363 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5365 # No user value, uncomment the following line to provide one.
5367 # value_source default
5371 # Validate RAM addresses during load
5372 # This option controls whether or not RedBoot will make
5373 # sure that memory being used by the "load" command is
5374 # in fact in user RAM. Leaving the option enabled makes
5375 # for a safer environment, but this check may not be valid
5376 # on all platforms, thus the ability to disable it.
5377 # ** Disable this only with great care **
5379 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5381 # No user value, uncomment the following line to provide one.
5383 # value_source default
5386 # The following properties are affected by this value
5387 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5388 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5391 # Allow RedBoot to support FLASH programming
5392 # If this option is enabled then RedBoot will provide commands
5393 # to manage images in FLASH memory. These images can be loaded
5394 # into memory for execution or executed in place.
5396 cdl_component CYGPKG_REDBOOT_FLASH {
5397 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5398 # CYGHWR_IO_FLASH_DEVICE == 1
5402 # No user value, uncomment the following line to provide one.
5404 # value_source default
5407 # The following properties are affected by this value
5408 # option CYGPRI_REDBOOT_ZLIB_FLASH
5409 # ActiveIf: CYGPKG_REDBOOT_FLASH
5410 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5411 # ActiveIf: CYGPKG_REDBOOT_FLASH
5415 # Byte order used to store info in flash.
5416 # This option controls the byte ordering used to store
5417 # the FIS directory info and flash config info.
5419 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5421 # No user value, uncomment the following line to provide one.
5422 # user_value NATURAL
5423 # value_source default
5424 # Default value: NATURAL
5425 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5428 # RedBoot Flash Image System support
5429 # doc: ref/flash-image-system.html
5430 # This option enables the Flash Image System commands
5431 # and support within RedBoot. If disabled, simple Flash
5432 # access commands such as "fis write" will still exist.
5433 # This option would be disabled for targets that need simple
5434 # FLASH manipulation, but do not have the need or space for
5435 # complete image management.
5437 cdl_option CYGOPT_REDBOOT_FIS {
5439 # No user value, uncomment the following line to provide one.
5441 # value_source default
5444 # The following properties are affected by this value
5445 # component CYGPKG_REDBOOT_FIS_CONTENTS
5446 # ActiveIf: CYGOPT_REDBOOT_FIS
5447 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5448 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5449 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5450 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5453 # Max number of chunks of free space to manage
5454 # If this option is defined then "fis free" will
5455 # rely on the FIS directory to determine what space is
5456 # free within the FLASH. This option controls the
5457 # maximum number of free segment which can be handled
5458 # (typically this number is small). If this option is
5459 # not enabled, the the archaic behaviour of actually
5460 # scanning the FLASH for erased sectors (unreliable)
5461 # will be used to determine what's free and what's
5464 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5466 # No user value, uncomment the following line to provide one.
5468 # value_source default
5469 # Default value: 1 32
5472 # Flash Image System default directory contents
5474 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5475 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5476 # CYGOPT_REDBOOT_FIS == 1
5479 # Calculated value: 1
5485 # Flash block containing the Directory
5486 # Which block of flash should hold the directory
5487 # information. Positive numbers are absolute block
5488 # numbers. Negative block numbers count backwards
5489 # from the last block. eg 2 means block 2, -2
5490 # means the last but one block.
5492 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5494 # No user value, uncomment the following line to provide one.
5496 # value_source default
5499 # The following properties are affected by this value
5500 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5501 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5502 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5505 # Redundant Flash Image System Directory Support
5506 # This option enables the use of a redundant FIS
5507 # directory within RedBoot. If enabled a flash block
5508 # will be reserved for a second copy of the fis
5509 # directory. Doing this allow for power failure safe
5510 # updates of the directory by the application.
5512 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5514 # No user value, uncomment the following line to provide one.
5516 # value_source default
5518 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5519 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5524 # Flash block containing the backup Directory
5525 # Which block of flash should hold the redundant
5526 # directory information. Positive numbers are
5527 # absolute block numbers. Negative block numbers
5528 # count backwards from the last block. eg 2 means
5529 # block 2, -2 means the last but one block.
5531 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5532 # This option is not active
5533 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5536 # No user value, uncomment the following line to provide one.
5538 # value_source default
5540 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5541 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5542 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5543 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5546 # The following properties are affected by this value
5547 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5548 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5549 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5553 # Pseudo-file to describe reserved area
5554 # If an area of FLASH is reserved, it is informative to
5555 # have a fis entry describing it. This option controls
5556 # creation of such an entry by default in the fis init
5559 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5560 # This option is not active
5561 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5562 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5566 # No user value, uncomment the following line to provide one.
5568 # value_source default
5572 # File to describe RedBoot boot image
5573 # Normally a ROM-startup RedBoot image is first in the
5574 # FLASH, and the system boots using that image. This
5575 # option controls creation of an entry describing it in
5576 # the fis init command. It might be disabled if a
5577 # platform has an immutable boot image of its own, where
5578 # we use a POST-startup RedBoot instead, which performs
5579 # less board initialization.
5581 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5583 # No user value, uncomment the following line to provide one.
5585 # value_source default
5588 # The following properties are affected by this value
5589 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5590 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5591 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5592 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5595 # File to describe RedBoot POST-compatible image
5596 # This option controls creation of an entry describing a
5597 # POST-startup RedBoot image in the fis init command.
5598 # Not all platforms support POST-startup. A platform
5599 # might have both for testing purposes, where the
5600 # eventual user would substitute their own POST code for
5601 # the initial ROM-startup RedBoot, and then jump to the
5602 # POST-compatible RedBoot immediately following.
5604 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5606 # No user value, uncomment the following line to provide one.
5608 # value_source default
5609 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5610 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5615 # Offset of POST image from FLASH start
5616 # This option specifies the offset for a POST image from
5617 # the start of FLASH. If unset, then the fis entry
5618 # describing the POST image will be placed where
5621 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5622 # This option is not active
5623 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5626 # No user value, uncomment the following line to provide one.
5628 # value_source default
5629 # Default value: 0 0
5630 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5631 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5632 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5635 # The following properties are affected by this value
5636 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5637 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5641 # File to describe RedBoot backup image
5642 # This option controls creation of an entry describing a
5643 # backup RedBoot image in the fis init command.
5644 # Conventionally a RAM-startup RedBoot image is kept
5645 # under this name for use in updating the ROM-based
5646 # RedBoot that boots the board.
5648 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5650 # No user value, uncomment the following line to provide one.
5652 # value_source default
5656 # Include ARM SIB ID in FIS
5657 # If set, this option will cause the last 5 words of
5658 # the FIS to include the special ID needed for the
5659 # flash to be recognized as a reserved area for RedBoot
5660 # by an ARM BootRom monitor.
5662 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5664 # No user value, uncomment the following line to provide one.
5666 # value_source default
5670 # Size of FIS directory entry
5671 # The FIS directory is limited to one single flash
5672 # sector. If your flash has tiny sectors, you may wish
5673 # to reduce this value in order to get more slots in
5674 # the FIS directory.
5676 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5678 # No user value, uncomment the following line to provide one.
5680 # value_source default
5681 # Default value: 256
5684 # Number of FIS directory entries
5685 # The FIS directory normally occupies a single flash
5686 # sector. Adjusting this value can allow for more than
5687 # one flash sector to be used, which is useful if your
5688 # sectors are very small.
5690 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5692 # No user value, uncomment the following line to provide one.
5694 # value_source default
5698 # Maximum RedBoot image size
5699 # This option controls the maximum length reserved
5700 # for the RedBoot boot image in the FIS table.
5701 # This should be a multiple of the flash's erase
5704 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5706 # No user value, uncomment the following line to provide one.
5707 # user_value 0x00020000
5708 # The inferred value should not be edited directly.
5709 inferred_value 0x00040000
5710 # value_source inferred
5711 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5712 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5716 # Offset from start of FLASH to RedBoot boot image
5717 # This option controls where the RedBoot boot image is
5718 # located relative to the start of FLASH.
5720 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5722 # No user value, uncomment the following line to provide one.
5724 # value_source default
5725 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5726 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5728 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5729 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5730 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5733 # The following properties are affected by this value
5734 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5735 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5736 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5737 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5738 # component CYGPKG_HAL_ARM_TX27_OPTIONS
5739 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5742 # Size of reserved area at start of FLASH
5743 # This option reserves an area at the start of
5744 # FLASH where RedBoot will never interfere; it is
5745 # expected that this area contains
5746 # (non-RedBoot-based) POST code or some other boot
5747 # monitor that executes before RedBoot.
5749 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5751 # No user value, uncomment the following line to provide one.
5753 # value_source default
5756 # The following properties are affected by this value
5757 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5758 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5759 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5760 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5761 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5762 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5766 # Keep all RedBoot FLASH data blocks locked.
5767 # When this option is enabled, RedBoot will keep configuration
5768 # data and the FIS directory blocks implicitly locked. While
5769 # this is somewhat safer, it does add overhead during updates.
5771 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5772 # This option is not active
5773 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5774 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5778 # No user value, uncomment the following line to provide one.
5780 # value_source default
5784 # Use CRC checksums on FIS images.
5785 # When this option is enabled, RedBoot will use CRC checksums
5786 # when reading and writing flash images.
5788 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5790 # No user value, uncomment the following line to provide one.
5792 # value_source default
5796 # ARM FLASH drivers support SIB flash block structure
5797 # This interface is implemented by a flash driver
5798 # to indicate that it supports the ARM SIB flash
5801 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5802 # No options implement this inferface
5803 # ActiveIf constraint: CYGPKG_HAL_ARM
5804 # CYGPKG_HAL_ARM == current
5807 # This value cannot be modified here.
5811 # The following properties are affected by this value
5812 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5813 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5816 # Use ARM SIB flash block structure
5817 # This option is used to interpret ARM Flash System
5818 # information blocks.
5820 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5821 # This option is not active
5822 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5823 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5827 # No user value, uncomment the following line to provide one.
5829 # value_source default
5834 # Keep RedBoot configuration data in FLASH
5835 # When this option is enabled, RedBoot will keep configuration
5836 # data in a separate block of FLASH memory. This data will
5837 # include such items as the node IP address or startup scripts.
5839 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5841 # No user value, uncomment the following line to provide one.
5843 # value_source default
5844 # Default value: CYGPKG_IO_FLASH != 0
5845 # CYGPKG_IO_FLASH == current
5848 # The following properties are affected by this value
5849 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5850 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5851 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5852 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5853 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5854 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5855 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5856 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5857 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5858 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5859 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5860 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5861 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5862 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5866 # Length of configuration data in FLASH
5867 # This option is used to control the amount of memory and FLASH
5868 # to be used for configuration options (persistent storage).
5870 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5872 # No user value, uncomment the following line to provide one.
5874 # value_source default
5875 # Default value: 4096
5878 # Style of media used for persistent data storage
5879 # Persistent data storage can either be held in 'norma' FLASH
5880 # or some other device (represented by the 'EEPROM' choice).
5881 # The different styles utilize different access methods.
5883 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5885 # No user value, uncomment the following line to provide one.
5887 # value_source default
5888 # Default value: FLASH
5889 # Legal values: "FLASH" "EEPROM"
5891 # The following properties are affected by this value
5892 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5893 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5894 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5895 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5898 # Merged config data and FIS directory
5899 # If this option is set, then the FIS directory and FLASH
5900 # configuration database will be stored in the same physical
5903 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5904 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5905 # CYGOPT_REDBOOT_FIS == 1
5906 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5910 # No user value, uncomment the following line to provide one.
5912 # value_source default
5915 # The following properties are affected by this value
5916 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5917 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5920 # Which block of flash to use
5921 # Which block of flash should hold the configuration
5922 # information. Positive numbers are absolute block numbers.
5923 # Negative block numbers count backwards from the last block.
5924 # eg 2 means block 2, -2 means the last but one block.
5926 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5928 # No user value, uncomment the following line to provide one.
5930 # value_source default
5934 # Support simple macros/aliases in FLASH
5935 # This option is used to allow support for simple text-based
5936 # macros (aliases). These aliases are kept in the FLASH
5937 # configuration data (persistent storage).
5939 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5941 # No user value, uncomment the following line to provide one.
5943 # value_source default
5947 # Length of strings in FLASH configuration data
5948 # This option is used to control the amount of memory
5949 # and FLASH to be used for string configuration
5950 # options (persistent storage).
5952 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5954 # No user value, uncomment the following line to provide one.
5956 # value_source default
5957 # Default value: 128
5960 # Length of configuration script(s) in FLASH
5961 # This option is used to control the amount of memory and
5962 # FLASH to be used for configuration options (persistent
5965 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5967 # No user value, uncomment the following line to provide one.
5969 # The inferred value should not be edited directly.
5971 # value_source inferred
5972 # Default value: 512
5975 # Fallback to read-only FLASH configuration
5976 # This option will cause the configuration information to
5977 # revert to the readonly information stored in the FLASH.
5978 # The option only takes effect after
5979 # 1) the config_ok flag has been set to be true,
5980 # indicating that at one time the copy in RAM was valid;
5982 # 2) the information in RAM has been verified to be invalid
5984 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5986 # No user value, uncomment the following line to provide one.
5988 # value_source default
5989 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5990 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5995 # Allow RedBoot to support fileio
5996 # If this option is enabled then RedBoot will provide commands
5997 # to load files from fileio file systems such as JFFS2.
5999 cdl_component CYGPKG_REDBOOT_FILEIO {
6000 # This option is not active
6001 # ActiveIf constraint: CYGPKG_IO_FILEIO
6002 # CYGPKG_IO_FILEIO (unknown) == 0
6006 # No user value, uncomment the following line to provide one.
6008 # value_source default
6011 # The following properties are affected by this value
6012 # option CYGNUM_REDBOOT_GETC_BUFFER
6013 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6017 # Include an ls command
6018 # If this option is enabled a simple ls command will be
6019 # included in redboot so the contents of a directory
6022 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
6023 # This option is not active
6024 # The parent CYGPKG_REDBOOT_FILEIO is not active
6027 # No user value, uncomment the following line to provide one.
6029 # value_source default
6034 # Allow RedBoot to support disks
6035 # If this option is enabled then RedBoot will provide commands
6036 # to load disk files.
6038 cdl_component CYGPKG_REDBOOT_DISK {
6046 # Include Redboot commands for disk access
6048 cdl_option CYGSEM_REDBOOT_DISK {
6049 # This option is not active
6050 # The parent CYGPKG_REDBOOT_DISK is disabled
6053 # No user value, uncomment the following line to provide one.
6055 # value_source default
6056 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6057 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6061 # Hardware drivers for disk-type devices
6063 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6064 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6065 # This option is not active
6066 # The parent CYGPKG_REDBOOT_DISK is disabled
6068 # This value cannot be modified here.
6072 # The following properties are affected by this value
6073 # option CYGSEM_REDBOOT_DISK
6074 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6077 # Maximum number of supported disks
6078 # This option controls the number of disks supported by
6081 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6082 # This option is not active
6083 # The parent CYGPKG_REDBOOT_DISK is disabled
6086 # No user value, uncomment the following line to provide one.
6088 # value_source default
6092 # Maximum number of partitions per disk
6093 # This option controls the maximum number of supported
6094 # partitions per disk.
6096 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6097 # This option is not active
6098 # The parent CYGPKG_REDBOOT_DISK is disabled
6101 # No user value, uncomment the following line to provide one.
6103 # value_source default
6107 # Support IDE disks.
6108 # When this option is enabled, RedBoot will support IDE disks.
6110 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6111 # This option is not active
6112 # The parent CYGPKG_REDBOOT_DISK is disabled
6113 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6114 # CYGINT_HAL_PLF_IF_IDE == 0
6118 # No user value, uncomment the following line to provide one.
6120 # value_source default
6125 # Work with VMware virtual disks
6126 # This option controls the disk driver behavior at
6129 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6130 # This option is not active
6131 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6134 # No user value, uncomment the following line to provide one.
6136 # value_source default
6141 # Support Linux second extended filesystems.
6142 # When this option is enabled, RedBoot will support EXT2
6145 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6146 # This option is not active
6147 # The parent CYGPKG_REDBOOT_DISK is disabled
6150 # No user value, uncomment the following line to provide one.
6152 # value_source default
6156 # Support ISO9660 filesystems.
6157 # When this option is enabled, RedBoot will support ISO9660
6160 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6161 # This option is not active
6162 # The parent CYGPKG_REDBOOT_DISK is disabled
6164 # Calculated value: 0
6171 # doc: ref/persistent-state-flash.html
6172 # This contains options related to RedBoot's boot script
6175 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6176 # There is no associated value.
6180 # Boot scripting enabled
6181 # This option controls whether RedBoot boot script
6182 # functionality is enabled.
6184 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6185 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6186 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6187 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6190 # Calculated value: 1
6195 # Use default RedBoot boot script
6196 # If enabled, this option will tell RedBoot to use the
6197 # value of this option as a default boot script.
6199 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6201 # No user value, uncomment the following line to provide one.
6203 # The inferred value should not be edited directly.
6205 # value_source inferred
6206 # Default value: 0 0
6208 # The following properties are affected by this value
6209 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6210 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6213 # Resolution (in ms) for script timeout value.
6214 # This option controls the resolution of the script
6215 # timeout. The value is specified in milliseconds
6216 # (ms), thus to have the script timeout be defined in
6217 # terms of tenths of seconds, use 100.
6219 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6221 # No user value, uncomment the following line to provide one.
6223 # The inferred value should not be edited directly.
6225 # value_source inferred
6226 # Default value: 1000
6229 # Script default timeout value
6230 # This option is used to set the default timeout for startup
6231 # scripts, when they are enabled.
6233 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6235 # No user value, uncomment the following line to provide one.
6237 # The inferred value should not be edited directly.
6239 # value_source inferred
6244 # Support RTC for time & date functions
6245 # When this option is enabled, RedBoot will support commands to
6246 # query and set the real time clock (time and date)
6248 cdl_option CYGSEM_REDBOOT_RTC {
6249 # This option is not active
6250 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6251 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6255 # No user value, uncomment the following line to provide one.
6257 # value_source default
6261 # Behave like a ROM monitor
6262 # Enabling this option will allow RedBoot to provide ROM
6263 # monitor-style services to programs which it executes.
6265 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6266 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6267 # CYG_HAL_STARTUP == ROMRAM
6268 # CYG_HAL_STARTUP == ROMRAM
6271 # Calculated value: 1
6274 # Requires: CYGSEM_HAL_ROM_MONITOR
6275 # CYGSEM_HAL_ROM_MONITOR == 1
6279 # Allow RedBoot to handle GNUPro application 'syscalls'.
6280 # If this option is enabled then RedBoot will install a
6281 # syscall handler to support debugging of applications
6282 # based on GNUPro newlib/bsp.
6284 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6286 # No user value, uncomment the following line to provide one.
6288 # value_source default
6291 # The following properties are affected by this value
6292 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6293 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6294 # option CYGPKG_HAL_GDB_FILEIO
6295 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6299 # Support additional syscalls for 'gprof' profiling
6300 # Support additional syscalls to support a periodic callback
6301 # function for histogram-style profiling, and an enquire/set
6303 # The application must use the GNUPro newlib facilities
6306 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6307 # This option is not active
6308 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6309 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6310 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6314 # No user value, uncomment the following line to provide one.
6316 # value_source default
6320 # Does the HAL support 'gprof' profiling?
6322 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6323 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6324 # This option is not active
6325 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6327 # This value cannot be modified here.
6331 # The following properties are affected by this value
6332 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6333 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6336 # Do not raise SIGTRAP when program exits
6337 # For some (single shot) newlib based programs,
6338 # exiting and returning a termination status may be
6339 # the normal expected behavior.
6341 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6342 # This option is not active
6343 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6346 # No user value, uncomment the following line to provide one.
6348 # value_source default
6353 # Use a common buffer for Zlib and FIS
6354 # Use a common memory buffer for both the zlib workspace
6355 # and FIS directory operations. This can save a substantial
6356 # amount of RAM, especially when flash sectors are large.
6358 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6359 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6360 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6361 # CYGOPT_REDBOOT_FIS == 1
6365 # No user value, uncomment the following line to provide one.
6367 # value_source default
6372 # Size of Zlib/FIS common buffer
6373 # Size of common buffer to allocate. Must be at least the
6374 # size of one flash sector.
6376 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6377 # This option is not active
6378 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6381 # No user value, uncomment the following line to provide one.
6382 # user_value 0x0000C000
6383 # value_source default
6384 # Default value: 0x0000C000
6385 # Legal values: 0x4000 to 0x80000000
6389 # Buffer size in getc when loading images
6390 # When loading images a buffer is used between redboot and the
6391 # underlying storage medium, eg a filesystem, or a socket etc.
6392 # The size of this buffer can have a big impart on load speed.
6394 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6396 # No user value, uncomment the following line to provide one.
6398 # value_source default
6399 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6400 # CYGPKG_REDBOOT_FILEIO == 0
6405 # Redboot for ARM options
6406 # This option lists the target's requirements for a valid Redboot
6409 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6410 # ActiveIf constraint: CYGPKG_REDBOOT
6411 # CYGPKG_REDBOOT == current
6414 # There is no associated value.
6416 # The following properties are affected by this value
6420 # Provide the exec command in RedBoot
6421 # This option contains requirements for booting linux
6422 # from RedBoot. The component is enabled/disabled from
6425 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6426 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6427 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6430 # There is no associated value.
6434 # Enable -x switch for exec command.
6435 # This option allows bi-endian platforms to launch kernels
6436 # built for an endianess different than the RedBoot endianess
6438 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6440 # No user value, uncomment the following line to provide one.
6442 # value_source default
6446 # Physical base address of linux kernel
6447 # This is the physical address of the base of the
6448 # Linux kernel image.
6450 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6452 # No user value, uncomment the following line to provide one.
6453 # user_value 0xA0108000
6454 # value_source default
6455 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6456 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6460 # Default physical base address of linux kernel
6461 # This is the physical address of the base of the
6462 # Linux kernel image. This option gets set by the
6465 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6467 # No user value, uncomment the following line to provide one.
6468 # user_value 0x00008000
6469 # The inferred value should not be edited directly.
6470 inferred_value 0xA0108000
6471 # value_source inferred
6472 # Default value: 0x00008000
6474 # The following properties are affected by this value
6475 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6476 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6477 # component CYGPKG_REDBOOT_HAL_TX27_OPTIONS
6478 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6481 # Base address of linux kernel parameter tags
6482 # This is the base address of the area of memory used to
6483 # pass parameters to the Linux kernel. This should be chosen
6484 # to avoid overlap with the kernel and any ramdisk image.
6486 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6488 # No user value, uncomment the following line to provide one.
6489 # user_value 0x00000100
6490 # value_source default
6491 # Default value: 0x00000100
6496 # Redboot HAL options
6497 # This option lists the target's requirements for a valid Redboot
6500 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6501 # ActiveIf constraint: CYGPKG_REDBOOT
6502 # CYGPKG_REDBOOT == current
6505 # There is no associated value.
6509 # Build Redboot ROM binary image
6510 # This option enables the conversion of the Redboot ELF
6511 # image to a binary image suitable for ROM programming.
6513 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6514 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6515 # CYGBLD_BUILD_REDBOOT == 1
6519 # No user value, uncomment the following line to provide one.
6521 # value_source default
6526 # Redboot HAL variant options
6528 cdl_component CYGPKG_REDBOOT_HAL_TX27_OPTIONS {
6529 # ActiveIf constraint: CYGPKG_REDBOOT
6530 # CYGPKG_REDBOOT == current
6533 # There is no associated value.
6534 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6535 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0xA0108000
6540 # ISO C and POSIX infrastructure
6541 # eCos supports implementations of ISO C libraries and POSIX
6542 # implementations. This package provides infrastructure used by
6543 # all such implementations.
6545 cdl_package CYGPKG_ISOINFRA {
6546 # Packages cannot be added or removed, nor can their version be changed,
6547 # simply by editing their value. Instead the appropriate configuration
6548 # should be used to perform these actions.
6550 # This value cannot be modified here.
6552 # Current value: 1 current
6554 # The following properties are affected by this value
6555 # component CYGBLD_BUILD_REDBOOT
6556 # Requires: CYGPKG_ISOINFRA
6557 # package CYGPKG_LIBC_STRING
6558 # Requires: CYGPKG_ISOINFRA
6559 # package CYGPKG_COMPRESS_ZLIB
6560 # Requires: CYGPKG_ISOINFRA
6561 # package CYGPKG_IO_FLASH
6562 # Requires: CYGPKG_ISOINFRA
6563 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6564 # Requires: CYGPKG_ISOINFRA
6565 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6566 # DefaultValue: 0 != CYGPKG_ISOINFRA
6567 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6568 # ActiveIf: CYGPKG_ISOINFRA
6569 # package CYGPKG_LIBC_I18N
6570 # Requires: CYGPKG_ISOINFRA
6571 # package CYGPKG_LIBC_STDLIB
6572 # Requires: CYGPKG_ISOINFRA
6576 # Startup and termination
6578 cdl_component CYGPKG_ISO_STARTUP {
6579 # There is no associated value.
6583 # main() startup implementations
6584 # Implementations of this interface arrange for a user-supplied
6585 # main() to be called in an ISO compatible environment.
6587 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6588 # No options implement this inferface
6589 # This value cannot be modified here.
6592 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6593 # CYGINT_ISO_MAIN_STARTUP == 0
6596 # The following properties are affected by this value
6597 # interface CYGINT_ISO_MAIN_STARTUP
6598 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6601 # environ implementations
6602 # Implementations of this interface provide the environ
6603 # variable required by POSIX.
6605 cdl_interface CYGINT_ISO_ENVIRON {
6606 # No options implement this inferface
6607 # This value cannot be modified here.
6610 # Requires: 1 >= CYGINT_ISO_ENVIRON
6611 # CYGINT_ISO_ENVIRON == 0
6614 # The following properties are affected by this value
6615 # interface CYGINT_ISO_ENVIRON
6616 # Requires: 1 >= CYGINT_ISO_ENVIRON
6622 cdl_component CYGPKG_ISO_CTYPE_H {
6623 # There is no associated value.
6627 # Number of implementations of ctype functions
6629 cdl_interface CYGINT_ISO_CTYPE {
6630 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6631 # This value cannot be modified here.
6634 # Requires: 1 >= CYGINT_ISO_CTYPE
6635 # CYGINT_ISO_CTYPE == 1
6638 # The following properties are affected by this value
6639 # interface CYGINT_ISO_CTYPE
6640 # Requires: 1 >= CYGINT_ISO_CTYPE
6641 # package CYGPKG_HAL_ARM_TX27KARO
6642 # Requires: CYGINT_ISO_CTYPE
6643 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6644 # Requires: CYGINT_ISO_CTYPE
6645 # package CYGPKG_LIBC_STDLIB
6646 # Requires: CYGINT_ISO_CTYPE
6649 # Ctype implementation header
6651 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6653 # No user value, uncomment the following line to provide one.
6655 # The inferred value should not be edited directly.
6656 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6657 # value_source inferred
6658 # Default value: 0 0
6660 # The following properties are affected by this value
6661 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6662 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6663 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6664 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6670 cdl_component CYGPKG_ISO_ERRNO {
6671 # There is no associated value.
6675 # Number of implementations of error codes
6677 cdl_interface CYGINT_ISO_ERRNO_CODES {
6678 # Implemented by CYGPKG_ERROR, active, enabled
6679 # This value cannot be modified here.
6682 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6683 # CYGINT_ISO_ERRNO_CODES == 1
6686 # The following properties are affected by this value
6687 # interface CYGINT_ISO_ERRNO_CODES
6688 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6691 # Error codes implementation header
6693 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6695 # No user value, uncomment the following line to provide one.
6697 # The inferred value should not be edited directly.
6698 inferred_value 1 <cyg/error/codes.h>
6699 # value_source inferred
6700 # Default value: 0 0
6702 # The following properties are affected by this value
6703 # package CYGPKG_ERROR
6704 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6707 # Number of implementations of errno variable
6709 cdl_interface CYGINT_ISO_ERRNO {
6710 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6711 # This value cannot be modified here.
6714 # Requires: 1 >= CYGINT_ISO_ERRNO
6715 # CYGINT_ISO_ERRNO == 1
6718 # The following properties are affected by this value
6719 # interface CYGINT_ISO_ERRNO
6720 # Requires: 1 >= CYGINT_ISO_ERRNO
6723 # errno variable implementation header
6725 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6727 # No user value, uncomment the following line to provide one.
6729 # The inferred value should not be edited directly.
6730 inferred_value 1 <cyg/error/errno.h>
6731 # value_source inferred
6732 # Default value: 0 0
6734 # The following properties are affected by this value
6735 # component CYGPKG_ERROR_ERRNO
6736 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6740 # Locale-related functions
6742 cdl_component CYGPKG_ISO_LOCALE {
6743 # There is no associated value.
6747 # Number of implementations of locale functions
6749 cdl_interface CYGINT_ISO_LOCALE {
6750 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6751 # This value cannot be modified here.
6754 # Requires: 1 >= CYGINT_ISO_LOCALE
6755 # CYGINT_ISO_LOCALE == 1
6758 # The following properties are affected by this value
6759 # interface CYGINT_ISO_LOCALE
6760 # Requires: 1 >= CYGINT_ISO_LOCALE
6763 # Locale implementation header
6765 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6767 # No user value, uncomment the following line to provide one.
6769 # value_source default
6770 # Default value: 0 0
6774 # Standard I/O-related functionality
6776 cdl_component CYGPKG_ISO_STDIO {
6777 # There is no associated value.
6781 # Number of implementations of stdio file types
6783 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6784 # No options implement this inferface
6785 # This value cannot be modified here.
6787 # Current value: 0 0
6788 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6789 # CYGINT_ISO_STDIO_FILETYPES == 0
6792 # The following properties are affected by this value
6793 # interface CYGINT_ISO_STDIO_FILETYPES
6794 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6797 # Stdio file types implementation header
6799 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6801 # No user value, uncomment the following line to provide one.
6803 # value_source default
6804 # Default value: 0 0
6807 # Stdio standard streams implementations
6809 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6810 # No options implement this inferface
6811 # This value cannot be modified here.
6813 # Current value: 0 0
6814 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6815 # CYGINT_ISO_STDIO_STREAMS == 0
6818 # The following properties are affected by this value
6819 # interface CYGINT_ISO_STDIO_STREAMS
6820 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6823 # Stdio standard streams implementation header
6824 # This header file must define stdin, stdout
6827 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6829 # No user value, uncomment the following line to provide one.
6831 # value_source default
6832 # Default value: 0 0
6835 # Number of implementations of stdio file operations
6837 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6838 # No options implement this inferface
6839 # This value cannot be modified here.
6841 # Current value: 0 0
6842 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6843 # CYGINT_ISO_STDIO_FILEOPS == 0
6846 # The following properties are affected by this value
6847 # interface CYGINT_ISO_STDIO_FILEOPS
6848 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6851 # Stdio file operations implementation header
6852 # This header controls the file system operations on a file
6853 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6856 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6858 # No user value, uncomment the following line to provide one.
6860 # value_source default
6861 # Default value: 0 0
6864 # Number of implementations of stdio file access functionals
6866 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6867 # No options implement this inferface
6868 # This value cannot be modified here.
6870 # Current value: 0 0
6871 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6872 # CYGINT_ISO_STDIO_FILEACCESS == 0
6875 # The following properties are affected by this value
6876 # interface CYGINT_ISO_STDIO_FILEACCESS
6877 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6878 # option CYGFUN_COMPRESS_ZLIB_GZIO
6879 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6882 # Stdio file access implementation header
6883 # This header controls the file access operations
6884 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6885 # setvbuf(), and associated constants.
6887 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6889 # No user value, uncomment the following line to provide one.
6891 # value_source default
6892 # Default value: 0 0
6895 # Number of implementations of stdio formatted I/O
6897 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6898 # No options implement this inferface
6899 # This value cannot be modified here.
6901 # Current value: 0 0
6902 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6903 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6906 # The following properties are affected by this value
6907 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6908 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6909 # option CYGFUN_COMPRESS_ZLIB_GZIO
6910 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6913 # Stdio formatted I/O implementation header
6915 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6917 # No user value, uncomment the following line to provide one.
6919 # value_source default
6920 # Default value: 0 0
6923 # Number of implementations of stdio character I/O
6925 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6926 # No options implement this inferface
6927 # This value cannot be modified here.
6929 # Current value: 0 0
6930 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6931 # CYGINT_ISO_STDIO_CHAR_IO == 0
6934 # The following properties are affected by this value
6935 # interface CYGINT_ISO_STDIO_CHAR_IO
6936 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6939 # Stdio character I/O implementation header
6941 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6943 # No user value, uncomment the following line to provide one.
6945 # value_source default
6946 # Default value: 0 0
6949 # Number of implementations of stdio direct I/O
6951 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6952 # No options implement this inferface
6953 # This value cannot be modified here.
6955 # Current value: 0 0
6956 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6957 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6960 # The following properties are affected by this value
6961 # interface CYGINT_ISO_STDIO_DIRECT_IO
6962 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6965 # Stdio direct I/O implementation header
6967 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6969 # No user value, uncomment the following line to provide one.
6971 # value_source default
6972 # Default value: 0 0
6975 # Number of implementations of stdio file positioning
6977 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6978 # No options implement this inferface
6979 # This value cannot be modified here.
6981 # Current value: 0 0
6982 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6983 # CYGINT_ISO_STDIO_FILEPOS == 0
6986 # The following properties are affected by this value
6987 # interface CYGINT_ISO_STDIO_FILEPOS
6988 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6989 # option CYGFUN_COMPRESS_ZLIB_GZIO
6990 # Requires: CYGINT_ISO_STDIO_FILEPOS
6993 # Stdio file positioning implementation header
6995 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6997 # No user value, uncomment the following line to provide one.
6999 # value_source default
7000 # Default value: 0 0
7003 # Number of implementations of stdio error handling
7005 cdl_interface CYGINT_ISO_STDIO_ERROR {
7006 # No options implement this inferface
7007 # This value cannot be modified here.
7009 # Current value: 0 0
7010 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7011 # CYGINT_ISO_STDIO_ERROR == 0
7014 # The following properties are affected by this value
7015 # interface CYGINT_ISO_STDIO_ERROR
7016 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7019 # Stdio error handling implementation header
7021 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
7023 # No user value, uncomment the following line to provide one.
7025 # value_source default
7026 # Default value: 0 0
7029 # POSIX fd-related function implementations
7031 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7032 # No options implement this inferface
7033 # This value cannot be modified here.
7035 # Current value: 0 0
7036 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7037 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7040 # The following properties are affected by this value
7041 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7042 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7045 # POSIX fd-related function implementation header
7047 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7049 # No user value, uncomment the following line to provide one.
7051 # value_source default
7052 # Default value: 0 0
7056 # Standard general utility functions
7058 cdl_component CYGPKG_ISO_STDLIB {
7059 # There is no associated value.
7063 # String conversion function implementations
7065 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7066 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7067 # This value cannot be modified here.
7070 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7071 # CYGINT_ISO_STDLIB_STRCONV == 1
7074 # The following properties are affected by this value
7075 # interface CYGINT_ISO_STDLIB_STRCONV
7076 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7079 # String conversion function implementation header
7081 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7083 # No user value, uncomment the following line to provide one.
7085 # The inferred value should not be edited directly.
7086 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7087 # value_source inferred
7088 # Default value: 0 0
7090 # The following properties are affected by this value
7091 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7092 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7095 # String to FP conversion function implementations
7097 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7098 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7099 # This value cannot be modified here.
7102 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7103 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7106 # The following properties are affected by this value
7107 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7108 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7111 # String to FP conversion function implementation header
7113 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7115 # No user value, uncomment the following line to provide one.
7117 # value_source default
7118 # Default value: 0 0
7121 # Random number generator implementations
7123 cdl_interface CYGINT_ISO_RAND {
7124 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7125 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7126 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7127 # This value cannot be modified here.
7130 # Requires: 1 >= CYGINT_ISO_RAND
7131 # CYGINT_ISO_RAND == 1
7134 # The following properties are affected by this value
7135 # interface CYGINT_ISO_RAND
7136 # Requires: 1 >= CYGINT_ISO_RAND
7139 # Random number generator implementation header
7141 cdl_option CYGBLD_ISO_RAND_HEADER {
7143 # No user value, uncomment the following line to provide one.
7145 # value_source default
7146 # Default value: 0 0
7149 # Malloc implementations
7151 cdl_interface CYGINT_ISO_MALLOC {
7152 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7153 # This value cannot be modified here.
7156 # Requires: 1 >= CYGINT_ISO_MALLOC
7157 # CYGINT_ISO_MALLOC == 1
7160 # The following properties are affected by this value
7161 # interface CYGINT_ISO_MALLOC
7162 # Requires: 1 >= CYGINT_ISO_MALLOC
7163 # option CYGFUN_LIBC_STRING_STRDUP
7164 # ActiveIf: CYGINT_ISO_MALLOC
7167 # Malloc implementation header
7169 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7171 # No user value, uncomment the following line to provide one.
7173 # value_source default
7174 # Default value: 0 0
7177 # Mallinfo() implementations
7179 cdl_interface CYGINT_ISO_MALLINFO {
7180 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7181 # This value cannot be modified here.
7184 # Requires: 1 >= CYGINT_ISO_MALLINFO
7185 # CYGINT_ISO_MALLINFO == 1
7188 # The following properties are affected by this value
7189 # interface CYGINT_ISO_MALLINFO
7190 # Requires: 1 >= CYGINT_ISO_MALLINFO
7193 # Mallinfo() implementation header
7195 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7197 # No user value, uncomment the following line to provide one.
7199 # value_source default
7200 # Default value: 0 0
7203 # Program exit functionality implementations
7205 cdl_interface CYGINT_ISO_EXIT {
7206 # No options implement this inferface
7207 # This value cannot be modified here.
7210 # Requires: 1 >= CYGINT_ISO_EXIT
7211 # CYGINT_ISO_EXIT == 0
7214 # The following properties are affected by this value
7215 # interface CYGINT_ISO_EXIT
7216 # Requires: 1 >= CYGINT_ISO_EXIT
7217 # option CYGFUN_INFRA_DUMMY_ABORT
7218 # Requires: !CYGINT_ISO_EXIT
7219 # option CYGFUN_INFRA_DUMMY_ABORT
7220 # DefaultValue: CYGINT_ISO_EXIT == 0
7223 # Program exit functionality implementation header
7225 cdl_option CYGBLD_ISO_EXIT_HEADER {
7227 # No user value, uncomment the following line to provide one.
7229 # value_source default
7230 # Default value: 0 0
7233 # Program environment implementations
7235 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7236 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7237 # This value cannot be modified here.
7240 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7241 # CYGINT_ISO_STDLIB_ENVIRON == 1
7244 # The following properties are affected by this value
7245 # interface CYGINT_ISO_STDLIB_ENVIRON
7246 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7249 # Program environment implementation header
7251 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7253 # No user value, uncomment the following line to provide one.
7255 # value_source default
7256 # Default value: 0 0
7259 # system() implementations
7261 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7262 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7263 # This value cannot be modified here.
7266 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7267 # CYGINT_ISO_STDLIB_SYSTEM == 1
7270 # The following properties are affected by this value
7271 # interface CYGINT_ISO_STDLIB_SYSTEM
7272 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7275 # system() implementation header
7277 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7279 # No user value, uncomment the following line to provide one.
7281 # value_source default
7282 # Default value: 0 0
7285 # bsearch() implementations
7287 cdl_interface CYGINT_ISO_BSEARCH {
7288 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7289 # This value cannot be modified here.
7292 # Requires: 1 >= CYGINT_ISO_BSEARCH
7293 # CYGINT_ISO_BSEARCH == 1
7296 # The following properties are affected by this value
7297 # interface CYGINT_ISO_BSEARCH
7298 # Requires: 1 >= CYGINT_ISO_BSEARCH
7301 # bsearch() implementation header
7303 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7305 # No user value, uncomment the following line to provide one.
7307 # value_source default
7308 # Default value: 0 0
7311 # qsort() implementations
7313 cdl_interface CYGINT_ISO_QSORT {
7314 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7315 # This value cannot be modified here.
7318 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7319 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7322 # The following properties are affected by this value
7325 # qsort() implementation header
7327 cdl_option CYGBLD_ISO_QSORT_HEADER {
7329 # No user value, uncomment the following line to provide one.
7331 # value_source default
7332 # Default value: 0 0
7335 # abs()/labs() implementations
7337 cdl_interface CYGINT_ISO_ABS {
7338 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7339 # This value cannot be modified here.
7342 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7343 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7346 # The following properties are affected by this value
7349 # abs()/labs() implementation header
7351 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7353 # No user value, uncomment the following line to provide one.
7355 # The inferred value should not be edited directly.
7356 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7357 # value_source inferred
7358 # Default value: 0 0
7360 # The following properties are affected by this value
7361 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7362 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7365 # div()/ldiv() implementations
7367 cdl_interface CYGINT_ISO_DIV {
7368 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7369 # This value cannot be modified here.
7372 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7373 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7376 # The following properties are affected by this value
7379 # div()/ldiv() implementation header
7381 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7383 # No user value, uncomment the following line to provide one.
7385 # The inferred value should not be edited directly.
7386 inferred_value 1 <cyg/libc/stdlib/div.inl>
7387 # value_source inferred
7388 # Default value: 0 0
7390 # The following properties are affected by this value
7391 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7392 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7395 # Header defining the implementation's MB_CUR_MAX
7397 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7399 # No user value, uncomment the following line to provide one.
7401 # value_source default
7402 # Default value: 0 0
7404 # The following properties are affected by this value
7405 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7406 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7409 # Multibyte character implementations
7411 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7412 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7413 # This value cannot be modified here.
7416 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7417 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7420 # The following properties are affected by this value
7421 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7422 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7425 # Multibyte character implementation header
7427 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7429 # No user value, uncomment the following line to provide one.
7431 # value_source default
7432 # Default value: 0 0
7438 cdl_component CYGPKG_ISO_STRING {
7439 # There is no associated value.
7443 # Number of implementations of strerror() function
7445 cdl_interface CYGINT_ISO_STRERROR {
7446 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7447 # This value cannot be modified here.
7449 # Current value: 1 1
7450 # Requires: 1 >= CYGINT_ISO_STRERROR
7451 # CYGINT_ISO_STRERROR == 1
7454 # The following properties are affected by this value
7455 # interface CYGINT_ISO_STRERROR
7456 # Requires: 1 >= CYGINT_ISO_STRERROR
7459 # strerror() implementation header
7461 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7463 # No user value, uncomment the following line to provide one.
7465 # The inferred value should not be edited directly.
7466 inferred_value 1 <cyg/error/strerror.h>
7467 # value_source inferred
7468 # Default value: 0 0
7470 # The following properties are affected by this value
7471 # option CYGPKG_ERROR_STRERROR
7472 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7475 # memcpy() implementation header
7477 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7479 # No user value, uncomment the following line to provide one.
7481 # value_source default
7482 # Default value: 0 0
7485 # memset() implementation header
7487 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7489 # No user value, uncomment the following line to provide one.
7491 # value_source default
7492 # Default value: 0 0
7495 # Number of implementations of strtok_r() function
7497 cdl_interface CYGINT_ISO_STRTOK_R {
7498 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7499 # This value cannot be modified here.
7501 # Current value: 1 1
7502 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7503 # CYGINT_ISO_STRTOK_R == 1
7506 # The following properties are affected by this value
7507 # interface CYGINT_ISO_STRTOK_R
7508 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7511 # strtok_r() implementation header
7513 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7515 # No user value, uncomment the following line to provide one.
7517 # The inferred value should not be edited directly.
7518 inferred_value 1 <cyg/libc/string/string.h>
7519 # value_source inferred
7520 # Default value: 0 0
7522 # The following properties are affected by this value
7523 # package CYGPKG_LIBC_STRING
7524 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7527 # Number of implementations of locale-specific string functions
7528 # This covers locale-dependent string functions such as strcoll()
7531 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7532 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7533 # This value cannot be modified here.
7535 # Current value: 1 1
7536 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7537 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7540 # The following properties are affected by this value
7541 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7542 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7545 # Locale-specific string functions' implementation header
7546 # This covers locale-dependent string functions such as strcoll()
7549 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7551 # No user value, uncomment the following line to provide one.
7553 # The inferred value should not be edited directly.
7554 inferred_value 1 <cyg/libc/string/string.h>
7555 # value_source inferred
7556 # Default value: 0 0
7558 # The following properties are affected by this value
7559 # package CYGPKG_LIBC_STRING
7560 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7563 # Number of implementations of BSD string functions
7565 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7566 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7567 # This value cannot be modified here.
7569 # Current value: 0 0
7570 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7571 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7574 # The following properties are affected by this value
7575 # interface CYGINT_ISO_STRING_BSD_FUNCS
7576 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7579 # BSD string functions' implementation header
7581 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7583 # No user value, uncomment the following line to provide one.
7585 # The inferred value should not be edited directly.
7586 inferred_value 1 <cyg/libc/string/bsdstring.h>
7587 # value_source inferred
7588 # Default value: 0 0
7590 # The following properties are affected by this value
7591 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7592 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7595 # Number of implementations of other mem*() functions
7597 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7598 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7599 # This value cannot be modified here.
7601 # Current value: 1 1
7602 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7603 # CYGINT_ISO_STRING_MEMFUNCS == 1
7606 # The following properties are affected by this value
7607 # interface CYGINT_ISO_STRING_MEMFUNCS
7608 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7609 # component CYGBLD_BUILD_REDBOOT
7610 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7611 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7612 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7615 # Other mem*() functions' implementation header
7617 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7619 # No user value, uncomment the following line to provide one.
7621 # The inferred value should not be edited directly.
7622 inferred_value 1 <cyg/libc/string/string.h>
7623 # value_source inferred
7624 # Default value: 0 0
7626 # The following properties are affected by this value
7627 # package CYGPKG_LIBC_STRING
7628 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7631 # Number of implementations of other ISO C str*() functions
7632 # This covers the other str*() functions defined by ISO C.
7634 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7635 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7636 # This value cannot be modified here.
7638 # Current value: 1 1
7639 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7640 # CYGINT_ISO_STRING_STRFUNCS == 1
7643 # The following properties are affected by this value
7644 # interface CYGINT_ISO_STRING_STRFUNCS
7645 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7646 # option CYGFUN_INFRA_DUMMY_STRLEN
7647 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7648 # option CYGFUN_INFRA_DUMMY_STRLEN
7649 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7650 # component CYGBLD_BUILD_REDBOOT
7651 # Requires: CYGINT_ISO_STRING_STRFUNCS
7652 # component CYGPKG_IO_ETH_DRIVERS_NET
7653 # Requires: CYGINT_ISO_STRING_STRFUNCS
7654 # option CYGFUN_COMPRESS_ZLIB_GZIO
7655 # Requires: CYGINT_ISO_STRING_STRFUNCS
7656 # package CYGPKG_IO_FLASH
7657 # Requires: CYGINT_ISO_STRING_STRFUNCS
7658 # package CYGPKG_LIBC_STDLIB
7659 # Requires: CYGINT_ISO_STRING_STRFUNCS
7662 # Other ISO C str*() functions' implementation header
7663 # This covers the other str*() functions defined by ISO C.
7665 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7667 # No user value, uncomment the following line to provide one.
7669 # The inferred value should not be edited directly.
7670 inferred_value 1 <cyg/libc/string/string.h>
7671 # value_source inferred
7672 # Default value: 0 0
7674 # The following properties are affected by this value
7675 # package CYGPKG_LIBC_STRING
7676 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7680 # Clock and time functionality
7682 cdl_component CYGPKG_ISO_TIME {
7683 # There is no associated value.
7687 # time_t implementation header
7689 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7691 # No user value, uncomment the following line to provide one.
7693 # value_source default
7694 # Default value: 0 0
7697 # clock_t implementation header
7699 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7701 # No user value, uncomment the following line to provide one.
7703 # value_source default
7704 # Default value: 0 0
7707 # struct timeval implementation header
7709 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7711 # No user value, uncomment the following line to provide one.
7713 # value_source default
7714 # Default value: 0 0
7717 # fnmatch implementation header
7719 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7721 # No user value, uncomment the following line to provide one.
7723 # value_source default
7724 # Default value: 0 0
7727 # Number of implementations of POSIX timer types
7729 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7730 # No options implement this inferface
7731 # This value cannot be modified here.
7733 # Current value: 0 0
7734 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7735 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7738 # The following properties are affected by this value
7739 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7740 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7743 # POSIX timer types implementation header
7745 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7747 # No user value, uncomment the following line to provide one.
7749 # value_source default
7750 # Default value: 0 0
7753 # Number of implementations of POSIX clock types
7755 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7756 # No options implement this inferface
7757 # This value cannot be modified here.
7759 # Current value: 0 0
7760 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7761 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7764 # The following properties are affected by this value
7765 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7766 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7769 # POSIX clock types implementation header
7771 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7773 # No user value, uncomment the following line to provide one.
7775 # value_source default
7776 # Default value: 0 0
7779 # Number of implementations of ISO C types
7781 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7782 # No options implement this inferface
7783 # This value cannot be modified here.
7785 # Current value: 0 0
7786 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7787 # CYGINT_ISO_C_TIME_TYPES == 0
7790 # The following properties are affected by this value
7791 # interface CYGINT_ISO_C_TIME_TYPES
7792 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7795 # ISO C time types implementation header
7797 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7799 # No user value, uncomment the following line to provide one.
7801 # value_source default
7802 # Default value: 0 0
7805 # Number of implementations of POSIX timers
7807 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7808 # No options implement this inferface
7809 # This value cannot be modified here.
7811 # Current value: 0 0
7812 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7813 # CYGINT_ISO_POSIX_TIMERS == 0
7816 # The following properties are affected by this value
7817 # interface CYGINT_ISO_POSIX_TIMERS
7818 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7821 # POSIX timer implementation header
7823 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7825 # No user value, uncomment the following line to provide one.
7827 # value_source default
7828 # Default value: 0 0
7831 # Number of implementations of POSIX clocks
7833 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7834 # No options implement this inferface
7835 # This value cannot be modified here.
7837 # Current value: 0 0
7838 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7839 # CYGINT_ISO_POSIX_CLOCKS == 0
7842 # The following properties are affected by this value
7843 # interface CYGINT_ISO_POSIX_CLOCKS
7844 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7847 # POSIX clocks implementation header
7849 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7851 # No user value, uncomment the following line to provide one.
7853 # value_source default
7854 # Default value: 0 0
7857 # Number of implementations of ISO C clock functions
7859 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7860 # No options implement this inferface
7861 # This value cannot be modified here.
7863 # Current value: 0 0
7864 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7865 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7868 # The following properties are affected by this value
7869 # interface CYGINT_ISO_C_CLOCK_FUNCS
7870 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7873 # ISO C clock functions' implementation header
7875 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7877 # No user value, uncomment the following line to provide one.
7879 # value_source default
7880 # Default value: 0 0
7883 # Number of implementations of tzset() function
7885 cdl_interface CYGINT_ISO_TZSET {
7886 # No options implement this inferface
7887 # This value cannot be modified here.
7889 # Current value: 0 0
7890 # Requires: 1 >= CYGINT_ISO_TZSET
7891 # CYGINT_ISO_TZSET == 0
7894 # The following properties are affected by this value
7895 # interface CYGINT_ISO_TZSET
7896 # Requires: 1 >= CYGINT_ISO_TZSET
7899 # tzset() implementation header
7901 cdl_option CYGBLD_ISO_TZSET_HEADER {
7903 # No user value, uncomment the following line to provide one.
7905 # value_source default
7906 # Default value: 0 0
7910 # Signal functionality
7912 cdl_component CYGPKG_ISO_SIGNAL {
7913 # There is no associated value.
7917 # Number of implementations of signal numbers
7919 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7920 # No options implement this inferface
7921 # This value cannot be modified here.
7924 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7925 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7928 # The following properties are affected by this value
7929 # interface CYGINT_ISO_SIGNAL_NUMBERS
7930 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7933 # Signal numbering implementation header
7934 # This header provides the mapping of signal
7935 # names (e.g. SIGBUS) to numbers.
7937 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7939 # No user value, uncomment the following line to provide one.
7941 # value_source default
7942 # Default value: 0 0
7945 # Number of signal implementations
7947 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7948 # No options implement this inferface
7949 # This value cannot be modified here.
7952 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7953 # CYGINT_ISO_SIGNAL_IMPL == 0
7956 # The following properties are affected by this value
7957 # interface CYGINT_ISO_SIGNAL_IMPL
7958 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7961 # Signals implementation header
7963 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7965 # No user value, uncomment the following line to provide one.
7967 # value_source default
7968 # Default value: 0 0
7971 # POSIX real time signals feature test macro
7972 # This defines the POSIX feature test macro
7973 # that indicates that the POSIX real time signals
7976 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7977 # No options implement this inferface
7978 # This value cannot be modified here.
7981 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7982 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7985 # The following properties are affected by this value
7986 # interface CYGINT_POSIX_REALTIME_SIGNALS
7987 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7991 # Non-local jumps functionality
7993 cdl_component CYGPKG_ISO_SETJMP {
7994 # There is no associated value.
7998 # setjmp() / longjmp() implementations
8000 cdl_interface CYGINT_ISO_SETJMP {
8001 # No options implement this inferface
8002 # This value cannot be modified here.
8005 # Requires: 1 >= CYGINT_ISO_SETJMP
8006 # CYGINT_ISO_SETJMP == 0
8009 # The following properties are affected by this value
8010 # interface CYGINT_ISO_SETJMP
8011 # Requires: 1 >= CYGINT_ISO_SETJMP
8014 # setjmp() / longjmp() implementation header
8016 cdl_option CYGBLD_ISO_SETJMP_HEADER {
8018 # No user value, uncomment the following line to provide one.
8020 # value_source default
8021 # Default value: 0 0
8024 # sigsetjmp() / siglongjmp() implementations
8026 cdl_interface CYGINT_ISO_SIGSETJMP {
8027 # No options implement this inferface
8028 # This value cannot be modified here.
8031 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8032 # CYGINT_ISO_SIGSETJMP == 0
8035 # The following properties are affected by this value
8036 # interface CYGINT_ISO_SIGSETJMP
8037 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8040 # sigsetjmp() / siglongjmp() implementation header
8042 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8044 # No user value, uncomment the following line to provide one.
8046 # value_source default
8047 # Default value: 0 0
8051 # Assertions implementation header
8053 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8055 # No user value, uncomment the following line to provide one.
8057 # value_source default
8058 # Default value: 0 0
8061 # POSIX file control
8062 # This covers the POSIX file control definitions,
8063 # normally found in <fcntl.h>
8065 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8066 # There is no associated value.
8070 # POSIX open flags implementation header
8072 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8074 # No user value, uncomment the following line to provide one.
8076 # value_source default
8077 # Default value: 0 0
8080 # POSIX fcntl() implementations
8082 cdl_interface CYGINT_ISO_FCNTL {
8083 # No options implement this inferface
8084 # This value cannot be modified here.
8087 # Requires: 1 >= CYGINT_ISO_FCNTL
8088 # CYGINT_ISO_FCNTL == 0
8091 # The following properties are affected by this value
8092 # interface CYGINT_ISO_FCNTL
8093 # Requires: 1 >= CYGINT_ISO_FCNTL
8096 # POSIX fcntl() implementation header
8098 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8100 # No user value, uncomment the following line to provide one.
8102 # value_source default
8103 # Default value: 0 0
8106 # POSIX file open implementations
8108 cdl_interface CYGINT_ISO_OPEN {
8109 # No options implement this inferface
8110 # This value cannot be modified here.
8113 # Requires: 1 >= CYGINT_ISO_OPEN
8114 # CYGINT_ISO_OPEN == 0
8117 # The following properties are affected by this value
8118 # interface CYGINT_ISO_OPEN
8119 # Requires: 1 >= CYGINT_ISO_OPEN
8122 # POSIX file open implementation header
8124 cdl_option CYGBLD_ISO_OPEN_HEADER {
8126 # No user value, uncomment the following line to provide one.
8128 # value_source default
8129 # Default value: 0 0
8133 # <sys/stat.h> definitions implementation header
8135 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8137 # No user value, uncomment the following line to provide one.
8139 # value_source default
8140 # Default value: 0 0
8143 # POSIX directory reading implementation
8145 cdl_interface CYGINT_ISO_DIRENT {
8146 # No options implement this inferface
8147 # This value cannot be modified here.
8150 # Requires: 1 >= CYGINT_ISO_DIRENT
8151 # CYGINT_ISO_DIRENT == 0
8154 # The following properties are affected by this value
8155 # interface CYGINT_ISO_DIRENT
8156 # Requires: 1 >= CYGINT_ISO_DIRENT
8159 # <dirent.h> definitions implementation header
8161 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8163 # No user value, uncomment the following line to provide one.
8165 # value_source default
8166 # Default value: 0 0
8169 # POSIX <sys/types.h> contents
8170 # This covers the types required by POSIX to be in
8173 cdl_component CYGPKG_ISO_POSIX_TYPES {
8174 # There is no associated value.
8178 # POSIX thread types implementations
8180 cdl_interface CYGINT_ISO_PTHREADTYPES {
8181 # No options implement this inferface
8182 # This value cannot be modified here.
8185 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8186 # CYGINT_ISO_PTHREADTYPES == 0
8189 # The following properties are affected by this value
8190 # interface CYGINT_ISO_PTHREADTYPES
8191 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8192 # interface CYGINT_ISO_PMUTEXTYPES
8193 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8196 # POSIX thread types implementation header
8198 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8200 # No user value, uncomment the following line to provide one.
8202 # value_source default
8203 # Default value: 0 0
8206 # POSIX mutex types implementations
8208 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8209 # No options implement this inferface
8210 # This value cannot be modified here.
8213 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8214 # CYGINT_ISO_PTHREADTYPES == 0
8218 # POSIX mutex types implementation header
8220 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8222 # No user value, uncomment the following line to provide one.
8224 # value_source default
8225 # Default value: 0 0
8228 # ssize_t implementation header
8230 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8232 # No user value, uncomment the following line to provide one.
8234 # value_source default
8235 # Default value: 0 0
8238 # Filesystem types implementation header
8240 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8242 # No user value, uncomment the following line to provide one.
8244 # value_source default
8245 # Default value: 0 0
8248 # gid_t, pid_t, uid_t implementation header
8250 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8252 # No user value, uncomment the following line to provide one.
8254 # value_source default
8255 # Default value: 0 0
8259 # Non-POSIX <sys/types.h> contents
8260 # This covers the extra types required by non-POSIX
8261 # packages to be in <sys/types.h>. These would normally
8262 # only be visible if _POSIX_SOURCE is not defined.
8264 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8265 # There is no associated value.
8269 # BSD compatible types
8271 cdl_interface CYGINT_ISO_BSDTYPES {
8272 # No options implement this inferface
8273 # This value cannot be modified here.
8276 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8277 # CYGINT_ISO_BSDTYPES == 0
8280 # The following properties are affected by this value
8281 # interface CYGINT_ISO_BSDTYPES
8282 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8287 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8289 # No user value, uncomment the following line to provide one.
8291 # value_source default
8292 # Default value: 0 0
8298 cdl_component CYGPKG_ISO_UTSNAME {
8299 # There is no associated value.
8305 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8307 # No user value, uncomment the following line to provide one.
8309 # value_source default
8310 # Default value: 0 0
8316 cdl_component CYGPKG_ISO_SCHED {
8317 # There is no associated value.
8321 # POSIX scheduler implementations
8323 cdl_interface CYGINT_ISO_SCHED_IMPL {
8324 # No options implement this inferface
8325 # This value cannot be modified here.
8328 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8329 # CYGINT_ISO_SCHED_IMPL == 0
8332 # The following properties are affected by this value
8333 # interface CYGINT_ISO_SCHED_IMPL
8334 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8337 # POSIX scheduler implementation header
8339 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8341 # No user value, uncomment the following line to provide one.
8343 # value_source default
8344 # Default value: 0 0
8350 cdl_component CYGPKG_ISO_SEMAPHORES {
8351 # There is no associated value.
8355 # POSIX semaphore implementations
8357 cdl_interface CYGINT_ISO_SEMAPHORES {
8358 # No options implement this inferface
8359 # This value cannot be modified here.
8362 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8363 # CYGINT_ISO_SEMAPHORES == 0
8366 # The following properties are affected by this value
8367 # interface CYGINT_ISO_SEMAPHORES
8368 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8371 # POSIX semaphore implementation header
8373 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8375 # No user value, uncomment the following line to provide one.
8377 # value_source default
8378 # Default value: 0 0
8382 # POSIX message queues
8384 cdl_component CYGPKG_ISO_MQUEUE {
8385 # There is no associated value.
8391 cdl_interface CYGINT_ISO_MQUEUE {
8392 # No options implement this inferface
8393 # This value cannot be modified here.
8396 # Requires: 1 >= CYGINT_ISO_MQUEUE
8397 # CYGINT_ISO_MQUEUE == 0
8400 # The following properties are affected by this value
8401 # interface CYGINT_ISO_MQUEUE
8402 # Requires: 1 >= CYGINT_ISO_MQUEUE
8403 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8404 # ActiveIf: CYGINT_ISO_MQUEUE
8405 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8406 # ActiveIf: CYGINT_ISO_MQUEUE
8409 # Implementation header
8411 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8413 # No user value, uncomment the following line to provide one.
8415 # value_source default
8416 # Default value: 0 0
8419 # Maximum number of open message queues
8421 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8422 # This option is not active
8423 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8424 # CYGINT_ISO_MQUEUE == 0
8428 # No user value, uncomment the following line to provide one.
8430 # value_source default
8431 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8432 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8433 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8437 # Maximum number of message priorities
8439 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8440 # This option is not active
8441 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8442 # CYGINT_ISO_MQUEUE == 0
8446 # No user value, uncomment the following line to provide one.
8447 # user_value 1 65535
8448 # value_source default
8449 # Default value: 1 65535
8455 cdl_component CYGPKG_ISO_PTHREAD {
8456 # There is no associated value.
8460 # POSIX pthread implementations
8462 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8463 # No options implement this inferface
8464 # This value cannot be modified here.
8466 # Current value: 0 0
8467 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8468 # CYGINT_ISO_PTHREAD_IMPL == 0
8471 # The following properties are affected by this value
8472 # interface CYGINT_ISO_PTHREAD_IMPL
8473 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8476 # POSIX pthread implementation header
8478 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8480 # No user value, uncomment the following line to provide one.
8482 # value_source default
8483 # Default value: 0 0
8486 # POSIX mutex/cond var implementations
8488 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8489 # No options implement this inferface
8490 # This value cannot be modified here.
8492 # Current value: 0 0
8493 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8494 # CYGINT_ISO_PTHREAD_MUTEX == 0
8497 # The following properties are affected by this value
8498 # interface CYGINT_ISO_PTHREAD_MUTEX
8499 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8502 # POSIX mutex/cond var implementation header
8504 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8506 # No user value, uncomment the following line to provide one.
8508 # value_source default
8509 # Default value: 0 0
8515 cdl_component CYGPKG_ISO_LIMITS {
8516 # There is no associated value.
8520 # POSIX pthread limits implementations
8522 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8523 # No options implement this inferface
8524 # This value cannot be modified here.
8527 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8528 # CYGINT_ISO_POSIX_LIMITS == 0
8531 # The following properties are affected by this value
8532 # interface CYGINT_ISO_POSIX_LIMITS
8533 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8536 # POSIX pthread limits implementation header
8538 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8540 # No user value, uncomment the following line to provide one.
8542 # value_source default
8543 # Default value: 0 0
8546 # OPEN_MAX implementation header
8548 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8550 # No user value, uncomment the following line to provide one.
8552 # value_source default
8553 # Default value: 0 0
8556 # LINK_MAX implementation header
8558 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8560 # No user value, uncomment the following line to provide one.
8562 # value_source default
8563 # Default value: 0 0
8566 # NAME_MAX implementation header
8568 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8570 # No user value, uncomment the following line to provide one.
8572 # value_source default
8573 # Default value: 0 0
8576 # PATH_MAX implementation header
8578 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8580 # No user value, uncomment the following line to provide one.
8582 # value_source default
8583 # Default value: 0 0
8589 cdl_component CYGPKG_ISO_TERMIOS {
8590 # There is no associated value.
8594 # POSIX termios implementations
8596 cdl_interface CYGINT_ISO_TERMIOS {
8597 # No options implement this inferface
8598 # This value cannot be modified here.
8601 # Requires: 1 >= CYGINT_ISO_TERMIOS
8602 # CYGINT_ISO_TERMIOS == 0
8605 # The following properties are affected by this value
8606 # interface CYGINT_ISO_TERMIOS
8607 # Requires: 1 >= CYGINT_ISO_TERMIOS
8610 # POSIX termios implementation header
8612 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8614 # No user value, uncomment the following line to provide one.
8616 # value_source default
8617 # Default value: 0 0
8623 cdl_component CYGPKG_ISO_DLFCN {
8624 # There is no associated value.
8628 # Dynamic load implementations
8630 cdl_interface CYGINT_ISO_DLFCN {
8631 # No options implement this inferface
8632 # This value cannot be modified here.
8635 # Requires: 1 >= CYGINT_ISO_DLFCN
8636 # CYGINT_ISO_DLFCN == 0
8639 # The following properties are affected by this value
8640 # interface CYGINT_ISO_DLFCN
8641 # Requires: 1 >= CYGINT_ISO_DLFCN
8644 # Dynamic load implementation header
8646 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8648 # No user value, uncomment the following line to provide one.
8650 # value_source default
8651 # Default value: 0 0
8655 # UNIX standard functions
8657 cdl_component CYGPKG_ISO_UNISTD {
8658 # There is no associated value.
8662 # POSIX timer operations implementations
8664 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8665 # No options implement this inferface
8666 # This value cannot be modified here.
8668 # Current value: 0 0
8669 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8670 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8673 # The following properties are affected by this value
8674 # interface CYGINT_ISO_POSIX_TIMER_OPS
8675 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8678 # POSIX timer operations implementation header
8680 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8682 # No user value, uncomment the following line to provide one.
8684 # value_source default
8685 # Default value: 0 0
8688 # POSIX sleep() implementations
8690 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8691 # No options implement this inferface
8692 # This value cannot be modified here.
8694 # Current value: 0 0
8695 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8696 # CYGINT_ISO_POSIX_SLEEP == 0
8699 # The following properties are affected by this value
8700 # interface CYGINT_ISO_POSIX_SLEEP
8701 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8704 # POSIX sleep() implementation header
8706 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8708 # No user value, uncomment the following line to provide one.
8710 # value_source default
8711 # Default value: 0 0
8715 # select()/poll() functions
8717 cdl_component CYGPKG_ISO_SELECT {
8718 # There is no associated value.
8722 # select() implementations
8724 cdl_interface CYGINT_ISO_SELECT {
8725 # No options implement this inferface
8726 # This value cannot be modified here.
8728 # Current value: 0 0
8729 # Requires: 1 >= CYGINT_ISO_SELECT
8730 # CYGINT_ISO_SELECT == 0
8733 # The following properties are affected by this value
8734 # interface CYGINT_ISO_SELECT
8735 # Requires: 1 >= CYGINT_ISO_SELECT
8738 # select() implementation header
8740 cdl_option CYGBLD_ISO_SELECT_HEADER {
8742 # No user value, uncomment the following line to provide one.
8744 # value_source default
8745 # Default value: 0 0
8748 # poll() implementations
8750 cdl_interface CYGINT_ISO_POLL {
8751 # No options implement this inferface
8752 # This value cannot be modified here.
8754 # Current value: 0 0
8755 # Requires: 1 >= CYGINT_ISO_POLL
8756 # CYGINT_ISO_POLL == 0
8759 # The following properties are affected by this value
8760 # interface CYGINT_ISO_POLL
8761 # Requires: 1 >= CYGINT_ISO_POLL
8764 # poll() implementation header
8766 cdl_option CYGBLD_ISO_POLL_HEADER {
8768 # No user value, uncomment the following line to provide one.
8770 # value_source default
8771 # Default value: 0 0
8775 # NetDB utility functions
8777 cdl_component CYGPKG_ISO_NETDB {
8778 # There is no associated value.
8782 # DNS implementations
8784 cdl_interface CYGINT_ISO_DNS {
8785 # No options implement this inferface
8786 # This value cannot be modified here.
8789 # Requires: 1 >= CYGINT_ISO_DNS
8790 # CYGINT_ISO_DNS == 0
8793 # The following properties are affected by this value
8794 # interface CYGINT_ISO_DNS
8795 # Requires: 1 >= CYGINT_ISO_DNS
8798 # DNS implementation header
8800 cdl_option CYGBLD_ISO_DNS_HEADER {
8802 # No user value, uncomment the following line to provide one.
8804 # value_source default
8805 # Default value: 0 0
8808 # Protocol network database implementations
8810 cdl_interface CYGINT_ISO_NETDB_PROTO {
8811 # No options implement this inferface
8812 # This value cannot be modified here.
8815 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8816 # CYGINT_ISO_NETDB_PROTO == 0
8819 # The following properties are affected by this value
8820 # interface CYGINT_ISO_NETDB_PROTO
8821 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8824 # Protocol network database implementation header
8826 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8828 # No user value, uncomment the following line to provide one.
8830 # value_source default
8831 # Default value: 0 0
8834 # Services network database implementations
8836 cdl_interface CYGINT_ISO_NETDB_SERV {
8837 # No options implement this inferface
8838 # This value cannot be modified here.
8841 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8842 # CYGINT_ISO_NETDB_SERV == 0
8845 # The following properties are affected by this value
8846 # interface CYGINT_ISO_NETDB_SERV
8847 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8850 # Services network database implementation header
8852 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8854 # No user value, uncomment the following line to provide one.
8856 # value_source default
8857 # Default value: 0 0
8862 # Package specific build options including control over
8863 # compiler flags used only in building this package,
8864 # and details of which tests are built.
8866 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8867 # There is no associated value.
8871 # Additional compiler flags
8872 # This option modifies the set of compiler flags for
8873 # building the ISO C and POSIX infrastructure package.
8874 # These flags are used in addition to the set of global flags.
8876 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8878 # No user value, uncomment the following line to provide one.
8880 # value_source default
8884 # Suppressed compiler flags
8885 # This option modifies the set of compiler flags for
8886 # building the ISO C and POSIX infrastructure package.
8887 # These flags are removed from the set of global flags
8890 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8892 # No user value, uncomment the following line to provide one.
8894 # value_source default
8901 # doc: ref/services-crc.html
8902 # This package provides support for CRC calculation. Currently
8903 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8904 # Gary S. Brown, and a 16 bit CRC.
8906 cdl_package CYGPKG_CRC {
8907 # Packages cannot be added or removed, nor can their version be changed,
8908 # simply by editing their value. Instead the appropriate configuration
8909 # should be used to perform these actions.
8911 # This value cannot be modified here.
8913 # Current value: 1 current
8915 # The following properties are affected by this value
8916 # package CYGPKG_COMPRESS_ZLIB
8917 # Requires: CYGPKG_CRC
8923 cdl_option CYGPKG_CRC_TESTS {
8924 # Calculated value: "tests/crc_test"
8926 # Current_value: tests/crc_test
8930 # Zlib compress and decompress package
8931 # This package provides support for compression and
8934 cdl_package CYGPKG_COMPRESS_ZLIB {
8935 # Packages cannot be added or removed, nor can their version be changed,
8936 # simply by editing their value. Instead the appropriate configuration
8937 # should be used to perform these actions.
8939 # This value cannot be modified here.
8941 # Current value: 1 current
8942 # Requires: CYGPKG_ISOINFRA
8943 # CYGPKG_ISOINFRA == current
8945 # Requires: CYGPKG_CRC
8946 # CYGPKG_CRC == current
8949 # The following properties are affected by this value
8950 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8951 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8955 # Override memory allocation routines.
8957 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8958 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8959 # This value cannot be modified here.
8963 # The following properties are affected by this value
8964 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8965 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8968 # Should deflate() produce 'gzip' compatible output?
8969 # If this option is set then the output of calling deflate()
8970 # will be wrapped up as a 'gzip' compatible file.
8972 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8974 # No user value, uncomment the following line to provide one.
8976 # value_source default
8980 # Does this library need malloc?
8981 # This pseudo-option will force the memalloc library to be
8982 # required iff the application does not provide it's own
8985 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8986 # This option is not active
8987 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8988 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8992 # No user value, uncomment the following line to provide one.
8994 # value_source default
8996 # Requires: CYGPKG_MEMALLOC
8997 # CYGPKG_MEMALLOC == current
9001 # Include stdio-like utility functions
9002 # This option enables the stdio-like zlib utility functions
9003 # (gzread/gzwrite and friends) provided in gzio.c.
9005 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
9007 # No user value, uncomment the following line to provide one.
9009 # value_source default
9010 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
9011 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
9013 # Requires: CYGINT_ISO_STDIO_FILEPOS
9014 # CYGINT_ISO_STDIO_FILEPOS == 0
9016 # Requires: CYGINT_ISO_STRING_STRFUNCS
9017 # CYGINT_ISO_STRING_STRFUNCS == 1
9019 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
9020 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
9022 # Requires: CYGINT_ISO_STDIO_FILEACCESS
9023 # CYGINT_ISO_STDIO_FILEACCESS == 0
9027 # Zlib compress and decompress package build options
9028 # Package specific build options including control over
9029 # compiler flags used only in building this package,
9030 # and details of which tests are built.
9032 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9033 # There is no associated value.
9037 # Additional compiler flags
9038 # This option modifies the set of compiler flags for
9039 # building this package. These flags are used in addition
9040 # to the set of global flags.
9042 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9044 # No user value, uncomment the following line to provide one.
9045 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9046 # value_source default
9047 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9050 # Suppressed compiler flags
9051 # This option modifies the set of compiler flags for
9052 # building this package. These flags are removed from
9053 # the set of global flags if present.
9055 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9057 # No user value, uncomment the following line to provide one.
9058 # user_value -Wstrict-prototypes
9059 # value_source default
9060 # Default value: -Wstrict-prototypes
9063 # Additional compiler flags
9064 # This option modifies the set of compiler flags for
9065 # building this package. These flags are used in addition
9066 # to the set of global flags.
9068 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9070 # No user value, uncomment the following line to provide one.
9072 # value_source default
9076 # Suppressed compiler flags
9077 # This option modifies the set of compiler flags for
9078 # building this package. These flags are removed from
9079 # the set of global flags if present.
9081 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9083 # No user value, uncomment the following line to provide one.
9085 # value_source default
9092 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9093 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9095 # Current_value: tests/zlib1.c tests/zlib2.c
9099 # FLASH device drivers
9100 # doc: ref/flash.html
9101 # This option enables drivers for basic I/O services on
9104 cdl_package CYGPKG_IO_FLASH {
9105 # Packages cannot be added or removed, nor can their version be changed,
9106 # simply by editing their value. Instead the appropriate configuration
9107 # should be used to perform these actions.
9109 # This value cannot be modified here.
9111 # Current value: 1 current
9112 # Requires: CYGPKG_ISOINFRA
9113 # CYGPKG_ISOINFRA == current
9115 # Requires: CYGINT_ISO_STRING_STRFUNCS
9116 # CYGINT_ISO_STRING_STRFUNCS == 1
9119 # The following properties are affected by this value
9120 # component CYGSEM_REDBOOT_FLASH_CONFIG
9121 # DefaultValue: CYGPKG_IO_FLASH != 0
9122 # package CYGPKG_DEVS_FLASH_ONMXC
9123 # ActiveIf: CYGPKG_IO_FLASH
9127 # Hardware FLASH device drivers
9128 # This option enables the hardware device drivers
9129 # for the current platform.
9131 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9132 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9133 # This value cannot be modified here.
9137 # The following properties are affected by this value
9138 # component CYGPKG_REDBOOT_FLASH
9139 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9142 # Hardware FLASH device drivers are not in RAM
9143 # Use of this interface is deprecated.
9144 # Drivers should make sure that the functions are
9145 # linked to RAM by putting them in .2ram sections.
9147 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9148 # No options implement this inferface
9149 # This value cannot be modified here.
9151 # Current value: 0 0
9152 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9153 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9156 # The following properties are affected by this value
9157 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9158 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9161 # Hardware can support block locking
9162 # This option will be enabled by devices which can support
9163 # locking (write-protection) of individual blocks.
9165 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9166 # No options implement this inferface
9167 # This value cannot be modified here.
9169 # Current value: 0 0
9171 # The following properties are affected by this value
9172 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9173 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9176 # Hardware cannot support direct access to FLASH memory
9177 # This option will be asserted by devices which cannot support
9178 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9179 # devices). In these cases, the driver must provide an appropriate
9180 # hardware access function.
9182 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9184 # No user value, uncomment the following line to provide one.
9186 # The inferred value should not be edited directly.
9188 # value_source inferred
9190 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9191 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9194 # The following properties are affected by this value
9195 # option CYGPRI_REDBOOT_ZLIB_FLASH
9196 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9197 # component CYGHWR_DEVS_FLASH_MMC
9198 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9199 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9200 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9201 # option CYGHWR_DEVS_FLASH_MMC_SD
9202 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9203 # option CYGHWR_DEVS_FLASH_MXC_NAND
9204 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9207 # Display status messages during flash operations
9208 # Selecting this option will cause the drivers to print status
9209 # messages as various flash operations are undertaken.
9211 cdl_option CYGSEM_IO_FLASH_CHATTER {
9213 # No user value, uncomment the following line to provide one.
9215 # value_source default
9219 # Verify data programmed to flash
9220 # Selecting this option will cause verification of data
9221 # programmed to flash.
9223 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9225 # No user value, uncomment the following line to provide one.
9227 # The inferred value should not be edited directly.
9229 # value_source inferred
9232 # The following properties are affected by this value
9233 # option CYGSEM_IO_FLASH_READ_INDIRECT
9234 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9237 # Platform has flash soft DIP switch write-protect
9238 # Selecting this option will cause the state of a hardware jumper or
9239 # dipswitch to be read by software to determine whether the flash is
9240 # write-protected or not.
9242 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9244 # No user value, uncomment the following line to provide one.
9246 # value_source default
9250 # Instantiate in I/O block device API
9251 # Provides a block device accessible using the standard I/O
9252 # API ( cyg_io_read() etc. )
9254 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9255 # This option is not active
9256 # ActiveIf constraint: CYGPKG_IO
9257 # CYGPKG_IO (unknown) == 0
9261 # No user value, uncomment the following line to provide one.
9263 # value_source default
9268 # Name of flash device 1 block device
9270 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9271 # This option is not active
9272 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9273 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9276 # No user value, uncomment the following line to provide one.
9277 # user_value "\"/dev/flash1\""
9278 # value_source default
9279 # Default value: "\"/dev/flash1\""
9284 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9285 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9286 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9287 # This option is not active
9288 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9290 # This value cannot be modified here.
9293 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9294 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9297 # The following properties are affected by this value
9298 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9299 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9302 # Static configuration
9303 # This configures the flash device 1 block device
9304 # with static base and length
9306 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9307 # This option is not active
9308 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9311 # No user value, uncomment the following line to provide one.
9313 # value_source default
9318 # Start offset from flash base
9319 # This gives the offset from the base of flash which this
9320 # block device corresponds to.
9322 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9323 # This option is not active
9324 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9327 # No user value, uncomment the following line to provide one.
9328 # user_value 0x00100000
9329 # value_source default
9330 # Default value: 0x00100000
9334 # This gives the length of the region of flash given over
9335 # to this block device.
9337 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9338 # This option is not active
9339 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9342 # No user value, uncomment the following line to provide one.
9343 # user_value 0x00100000
9344 # value_source default
9345 # Default value: 0x00100000
9349 # Configuration from FIS
9350 # This configures the flash device 1 block device
9353 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9354 # This option is not active
9355 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9358 # No user value, uncomment the following line to provide one.
9360 # value_source default
9367 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9368 # This option is not active
9369 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9370 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9373 # No user value, uncomment the following line to provide one.
9374 # user_value "\"jffs2\""
9375 # value_source default
9376 # Default value: "\"jffs2\""
9382 # Flash device driver build options
9383 # Package specific build options including control over
9384 # compiler flags used only in building this package,
9385 # and details of which tests are built.
9387 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9388 # There is no associated value.
9392 # Additional compiler flags
9393 # This option modifies the set of compiler flags for
9394 # building the flash device drivers. These flags are used in addition
9395 # to the set of global flags.
9397 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9399 # No user value, uncomment the following line to provide one.
9401 # value_source default
9405 # Suppressed compiler flags
9406 # This option modifies the set of compiler flags for
9407 # building the flash device drivers. These flags are removed from
9408 # the set of global flags if present.
9410 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9412 # No user value, uncomment the following line to provide one.
9414 # value_source default
9418 # Flash device driver tests
9419 # This option specifies the set of tests for the flash device drivers.
9421 cdl_component CYGPKG_IO_FLASH_TESTS {
9422 # Calculated value: "tests/flash1"
9424 # Current_value: tests/flash1
9428 # Start offset from flash base
9429 # This gives the offset from the base of flash where tests
9430 # can be run. It is important to set this correctly, as an
9431 # incorrect value could allow the tests to write over critical
9432 # portions of the FLASH device and possibly render the target
9433 # board totally non-functional.
9435 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9437 # No user value, uncomment the following line to provide one.
9438 # user_value 0x00100000
9439 # value_source default
9440 # Default value: 0x00100000
9444 # This gives the length of the region of flash used for testing.
9446 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9448 # No user value, uncomment the following line to provide one.
9449 # user_value 0x00100000
9450 # value_source default
9451 # Default value: 0x00100000
9456 # Support FLASH memory on Freescale MXC platforms
9458 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9459 # Packages cannot be added or removed, nor can their version be changed,
9460 # simply by editing their value. Instead the appropriate configuration
9461 # should be used to perform these actions.
9463 # ActiveIf constraint: CYGPKG_IO_FLASH
9464 # CYGPKG_IO_FLASH == current
9467 # This value cannot be modified here.
9469 # Current value: 1 current
9473 # MXC platform MMC card support
9474 # When this option is enabled, it indicates MMC card is
9475 # supported on the MXC platforms
9477 cdl_component CYGHWR_DEVS_FLASH_MMC {
9479 # No user value, uncomment the following line to provide one.
9481 # value_source default
9483 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9484 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9487 # The following properties are affected by this value
9488 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9489 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9490 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9491 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9492 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9493 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9494 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9495 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9499 # MXC platform MMC card for newer SDHC controllers
9501 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9502 # This option is not active
9503 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9504 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9505 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9506 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9507 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9508 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9509 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9510 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
9514 # No user value, uncomment the following line to provide one.
9516 # value_source default
9518 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9519 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9523 # MXC platform MMC card for older MMC/SD controllers
9525 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9526 # This option is not active
9527 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9528 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9529 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9530 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9534 # No user value, uncomment the following line to provide one.
9536 # value_source default
9538 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9539 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9544 # MXC platform NOR flash memory support
9545 # When this option is enabled, it indicates NOR flash is
9546 # supported on the MXC platforms
9548 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9550 # No user value, uncomment the following line to provide one.
9552 # The inferred value should not be edited directly.
9554 # value_source inferred
9557 # The following properties are affected by this value
9558 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9559 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9560 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9561 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9562 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9563 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9564 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9565 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9566 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9567 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9570 # MXC platform NAND flash memory support
9571 # When this option is enabled, it indicates NAND flash is
9572 # supported on the MXC platforms
9574 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9576 # No user value, uncomment the following line to provide one.
9578 # The inferred value should not be edited directly.
9580 # value_source inferred
9582 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9583 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9586 # The following properties are affected by this value
9587 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9588 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9589 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9590 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9591 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9592 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9593 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9594 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9595 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9596 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9597 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9598 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9601 # i.MX platform SPI NOR flash memory support
9602 # When this option is enabled, it indicates SPI NOR flash is
9603 # supported on the i.MX platforms
9605 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9607 # No user value, uncomment the following line to provide one.
9609 # value_source default
9611 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9612 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9616 # MXC platform ATA support
9617 # When this option is enabled, it indicates ATA is
9618 # supported on the MXC platforms
9620 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9622 # No user value, uncomment the following line to provide one.
9624 # value_source default
9628 # Use a flash based Bad Block Table
9630 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9631 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9632 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9635 # There is no associated value.
9639 # When this option is enabled, the driver will search for a flash
9640 # based bad block table
9642 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9644 # No user value, uncomment the following line to provide one.
9646 # value_source default
9650 # header file defining the NAND BBT descriptor
9651 # defines the name of the header file that describes the BBT layout
9653 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9655 # No user value, uncomment the following line to provide one.
9657 # The inferred value should not be edited directly.
9658 inferred_value 1 <cyg/io/tx27_nand_bbt.h>
9659 # value_source inferred
9660 # Default value: 0 0
9663 # Number of blocks to reserve for BBT
9664 # Number of blocks to reserve for BBT
9666 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9668 # No user value, uncomment the following line to provide one.
9670 # value_source default
9675 # MXC platform multi flash memory support
9676 # When this option is enabled, it indicates multi flashes are
9677 # supported on the MXC platforms (like NAND and NOR)
9679 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9680 # This option is not active
9681 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9682 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9683 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9684 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9685 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9686 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9687 # CYGHWR_DEVS_FLASH_MMC == 0
9688 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9689 # CYGHWR_DEVS_FLASH_MMC == 0
9693 # No user value, uncomment the following line to provide one.
9695 # The inferred value should not be edited directly.
9697 # value_source inferred
9701 # MXC platform NAND flash reset workaround support
9702 # When this option is enabled, it indicates 0xFFFF is used for
9703 # the NAND reset command instead of 0xFF.
9705 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9706 # No options implement this inferface
9707 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9708 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9711 # This value cannot be modified here.
9718 # Dynamic memory allocation
9719 # doc: ref/memalloc.html
9720 # This package provides memory allocator infrastructure required for
9721 # dynamic memory allocators, including the ISO standard malloc
9722 # interface. It also contains some sample implementations.
9724 cdl_package CYGPKG_MEMALLOC {
9725 # Packages cannot be added or removed, nor can their version be changed,
9726 # simply by editing their value. Instead the appropriate configuration
9727 # should be used to perform these actions.
9729 # This value cannot be modified here.
9731 # Current value: 1 current
9733 # The following properties are affected by this value
9734 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9735 # Requires: CYGPKG_MEMALLOC
9739 # Memory allocator implementations
9740 # This component contains configuration options related to the
9741 # various memory allocators available.
9743 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9744 # There is no associated value.
9748 # Fixed block allocator
9749 # This component contains configuration options related to the
9750 # fixed block memory allocator.
9752 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9753 # There is no associated value.
9758 # With this option enabled, this allocator will be
9759 # made thread-safe. Additionally allocation functions
9760 # are made available that allow a thread to wait
9761 # until memory is available.
9763 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9764 # This option is not active
9765 # ActiveIf constraint: CYGPKG_KERNEL
9766 # CYGPKG_KERNEL (unknown) == 0
9770 # No user value, uncomment the following line to provide one.
9772 # value_source default
9777 # Simple variable block allocator
9778 # This component contains configuration options related to the
9779 # simple variable block memory allocator. This allocator is not
9780 # very fast, and in particular does not scale well with large
9781 # numbers of allocations. It is however very compact in terms of
9782 # code size and does not have very much overhead per allocation.
9784 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9785 # There is no associated value.
9790 # With this option enabled, this allocator will be
9791 # made thread-safe. Additionally allocation functions
9792 # are added that allow a thread to wait until memory
9793 # are made available that allow a thread to wait
9794 # until memory is available.
9796 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9797 # This option is not active
9798 # ActiveIf constraint: CYGPKG_KERNEL
9799 # CYGPKG_KERNEL (unknown) == 0
9803 # No user value, uncomment the following line to provide one.
9805 # value_source default
9810 # The variable-block memory allocator can perform coalescing
9811 # of memory whenever the application code releases memory back
9812 # to the pool. This coalescing reduces the possibility of
9813 # memory fragmentation problems, but involves extra code and
9816 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9818 # No user value, uncomment the following line to provide one.
9820 # value_source default
9823 # The following properties are affected by this value
9824 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9825 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9830 # This component contains configuration options related to the
9831 # port of Doug Lea's memory allocator, normally known as
9832 # dlmalloc. dlmalloc has a reputation for being both fast
9833 # and space-conserving, as well as resisting fragmentation well.
9834 # It is a common choice for a general purpose allocator and
9835 # has been used in both newlib and Linux glibc.
9837 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9838 # There is no associated value.
9843 # Doug Lea's malloc implementation has substantial amounts
9844 # of internal checking in order to verify the operation
9845 # and consistency of the allocator. However this imposes
9846 # substantial overhead on each operation. Therefore this
9847 # checking may be individually disabled.
9849 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9851 # No user value, uncomment the following line to provide one.
9853 # value_source default
9854 # Default value: 0 != CYGDBG_USE_ASSERTS
9855 # CYGDBG_USE_ASSERTS == 0
9857 # Requires: CYGDBG_USE_ASSERTS
9858 # CYGDBG_USE_ASSERTS == 0
9863 # With this option enabled, this allocator will be
9864 # made thread-safe. Additionally allocation functions
9865 # are made available that allow a thread to wait
9866 # until memory is available.
9868 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9869 # This option is not active
9870 # ActiveIf constraint: CYGPKG_KERNEL
9871 # CYGPKG_KERNEL (unknown) == 0
9875 # No user value, uncomment the following line to provide one.
9877 # value_source default
9879 # Requires: CYGPKG_KERNEL
9880 # CYGPKG_KERNEL (unknown) == 0
9884 # Support more than one instance
9885 # Having this option disabled allows important
9886 # implementation structures to be declared as a single
9887 # static instance, allowing faster access. However this
9888 # would fail if there is more than one instance of
9889 # the dlmalloc allocator class. Therefore this option can
9890 # be enabled if multiple instances are required. Note: as
9891 # a special case, if this allocator is used as the
9892 # implementation of malloc, and it can be determined there
9893 # is more than one malloc pool, then this option will be
9896 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9898 # No user value, uncomment the following line to provide one.
9900 # value_source default
9904 # Use system memmove() and memset()
9905 # This may be used to control whether memset() and memmove()
9906 # are used within the implementation. The alternative is
9907 # to use some macro equivalents, which some people report
9908 # are faster in some circumstances.
9910 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9912 # No user value, uncomment the following line to provide one.
9914 # value_source default
9915 # Default value: 0 != CYGPKG_ISOINFRA
9916 # CYGPKG_ISOINFRA == current
9918 # Requires: CYGPKG_ISOINFRA
9919 # CYGPKG_ISOINFRA == current
9923 # Minimum alignment of allocated blocks
9924 # This option controls the minimum alignment that the
9925 # allocated memory blocks are aligned on, specified as
9926 # 2^N. Note that using large mininum alignments can lead
9927 # to excessive memory wastage.
9929 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9931 # No user value, uncomment the following line to provide one.
9933 # value_source default
9935 # Legal values: 3 to 10
9939 # Variable block allocator with separate metadata
9940 # This component contains configuration options related to the
9941 # variable block memory allocator with separate metadata.
9943 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9944 # There is no associated value.
9949 # With this option enabled, this allocator will be
9950 # made thread-safe. Additionally allocation functions
9951 # are made available that allow a thread to wait
9952 # until memory is available.
9954 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9955 # This option is not active
9956 # ActiveIf constraint: CYGPKG_KERNEL
9957 # CYGPKG_KERNEL (unknown) == 0
9961 # No user value, uncomment the following line to provide one.
9963 # value_source default
9969 # Kernel C API support for memory allocation
9970 # This option must be enabled to provide the extensions required
9971 # to support integration into the kernel C API.
9973 cdl_option CYGFUN_MEMALLOC_KAPI {
9974 # This option is not active
9975 # ActiveIf constraint: CYGPKG_KERNEL
9976 # CYGPKG_KERNEL (unknown) == 0
9980 # No user value, uncomment the following line to provide one.
9982 # value_source default
9983 # Default value: CYGFUN_KERNEL_API_C
9984 # CYGFUN_KERNEL_API_C (unknown) == 0
9988 # malloc(0) returns NULL
9989 # This option controls the behavior of malloc(0) ( or calloc with
9990 # either argument 0 ). It is permitted by the standard to return
9991 # either a NULL pointer or a unique pointer. Enabling this option
9992 # forces a NULL pointer to be returned.
9994 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9996 # No user value, uncomment the following line to provide one.
9998 # value_source default
10002 # Breakpoint site when running out of memory
10003 # Whenever the system runs out of memory, it invokes this function
10004 # before either going to sleep waiting for memory to become
10005 # available or returning failure.
10007 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
10009 # No user value, uncomment the following line to provide one.
10011 # value_source default
10015 # malloc() and supporting allocators
10016 # This component enables support for dynamic memory
10017 # allocation as supplied by the functions malloc(),
10018 # free(), calloc() and realloc(). As these
10019 # functions are often used, but can have quite an
10020 # overhead, disabling them here can ensure they
10021 # cannot even be used accidentally when static
10022 # allocation is preferred. Within this component are
10023 # various allocators that can be selected for use
10024 # as the underlying implementation of the dynamic
10025 # allocation functions.
10027 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10028 # ActiveIf constraint: CYGPKG_ISOINFRA
10029 # CYGPKG_ISOINFRA == current
10033 # No user value, uncomment the following line to provide one.
10035 # value_source default
10040 # Use external heap definition
10041 # This option allows other components in the
10042 # system to override the default system
10043 # provision of heap memory pools. This should
10044 # be set to a header which provides the equivalent
10045 # definitions to <pkgconf/heaps.hxx>.
10047 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10049 # No user value, uncomment the following line to provide one.
10051 # value_source default
10052 # Default value: 0 0
10055 # Use external implementation of joining multiple heaps
10056 # The default implementation of joining multiple heaps
10057 # is fine for the case where there are multiple disjoint
10058 # memory regions of the same type. However, in a system
10059 # there might be e.g. a small amount of internal SRAM and
10060 # a large amount of external DRAM. The SRAM is faster and
10061 # the DRAM is slower. An application can implement some
10062 # heuristic to choose which pool to allocate from. This
10063 # heuristic can be highly application specific.
10065 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10067 # No user value, uncomment the following line to provide one.
10069 # value_source default
10070 # Default value: 0 0
10073 # malloc() allocator implementations
10075 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10076 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10077 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10078 # This value cannot be modified here.
10081 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10082 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10085 # The following properties are affected by this value
10086 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10087 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10090 # malloc() implementation instantiation data
10091 # Memory allocator implementations that are capable of being
10092 # used underneath malloc() must be instantiated. The code
10093 # to do this is set in this option. It is only intended to
10094 # be set by the implementation, not the user.
10096 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10098 # No user value, uncomment the following line to provide one.
10099 # user_value <cyg/memalloc/dlmalloc.hxx>
10100 # value_source default
10101 # Default value: <cyg/memalloc/dlmalloc.hxx>
10103 # The following properties are affected by this value
10104 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10105 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10106 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10107 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10110 # Simple variable block implementation
10111 # This causes malloc() to use the simple
10112 # variable block allocator.
10114 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10116 # No user value, uncomment the following line to provide one.
10118 # value_source default
10120 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10121 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10123 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10124 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10128 # Doug Lea's malloc implementation
10129 # This causes malloc() to use a version of Doug Lea's
10130 # malloc (dlmalloc) as the underlying implementation.
10132 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10134 # No user value, uncomment the following line to provide one.
10136 # value_source default
10138 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10139 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10144 # Size of the fallback dynamic memory pool in bytes
10145 # If *no* heaps are configured in your memory layout,
10146 # dynamic memory allocation by
10147 # malloc() and calloc() must be from a fixed-size,
10148 # contiguous memory pool (note here that it is the
10149 # pool that is of a fixed size, but malloc() is still
10150 # able to allocate variable sized chunks of memory
10151 # from it). This option is the size
10152 # of that pool, in bytes. Note that not all of
10153 # this is available for programs to
10154 # use - some is needed for internal information
10155 # about memory regions, and some may be lost to
10156 # ensure that memory allocation only returns
10157 # memory aligned on word (or double word)
10158 # boundaries - a very common architecture
10161 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10163 # No user value, uncomment the following line to provide one.
10165 # value_source default
10166 # Default value: 16384
10167 # Legal values: 32 to 0x7fffffff
10170 # Common memory allocator package build options
10171 # Package specific build options including control over
10172 # compiler flags used only in building this package,
10173 # and details of which tests are built.
10175 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10176 # There is no associated value.
10180 # Additional compiler flags
10181 # This option modifies the set of compiler flags for
10182 # building this package. These flags are used in addition
10183 # to the set of global flags.
10185 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10187 # No user value, uncomment the following line to provide one.
10188 # user_value "-fno-rtti -Woverloaded-virtual"
10189 # value_source default
10190 # Default value: "-fno-rtti -Woverloaded-virtual"
10193 # Suppressed compiler flags
10194 # This option modifies the set of compiler flags for
10195 # building this package. These flags are removed from
10196 # the set of global flags if present.
10198 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10200 # No user value, uncomment the following line to provide one.
10201 # user_value -Wno-pointer-sign
10202 # value_source default
10203 # Default value: -Wno-pointer-sign
10207 # This option specifies the set of tests for this package.
10209 cdl_option CYGPKG_MEMALLOC_TESTS {
10210 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10212 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10217 # Common error code support
10218 # This package contains the common list of error and
10219 # status codes. It is held centrally to allow
10220 # packages to interchange error codes and status
10221 # codes in a common way, rather than each package
10222 # having its own conventions for error/status
10223 # reporting. The error codes are modelled on the
10224 # POSIX style naming e.g. EINVAL etc. This package
10225 # also provides the standard strerror() function to
10226 # convert error codes to textual representation, as
10227 # well as an implementation of the errno idiom.
10229 cdl_package CYGPKG_ERROR {
10230 # Packages cannot be added or removed, nor can their version be changed,
10231 # simply by editing their value. Instead the appropriate configuration
10232 # should be used to perform these actions.
10234 # This value cannot be modified here.
10236 # Current value: 1 current
10237 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10238 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10244 # This package controls the behaviour of the
10245 # errno variable (or more strictly, expression)
10248 cdl_component CYGPKG_ERROR_ERRNO {
10250 # No user value, uncomment the following line to provide one.
10252 # value_source default
10254 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10255 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10261 # This option controls whether the standard error
10262 # code reporting variable errno is a per-thread
10263 # variable, rather than global.
10265 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10267 # No user value, uncomment the following line to provide one.
10269 # The inferred value should not be edited directly.
10271 # value_source inferred
10273 # Requires: CYGVAR_KERNEL_THREADS_DATA
10274 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10279 # Trace verbosity level for debugging the errno
10280 # retrieval mechanism in errno.cxx. Increase this
10281 # value to get additional trace output.
10283 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10285 # No user value, uncomment the following line to provide one.
10287 # value_source default
10289 # Legal values: 0 to 1
10293 # strerror function
10294 # This package controls the presence and behaviour of the
10295 # strerror() function from <string.h>
10297 cdl_option CYGPKG_ERROR_STRERROR {
10299 # No user value, uncomment the following line to provide one.
10301 # value_source default
10303 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10304 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10308 # Error package build options
10309 # Package specific build options including control over
10310 # compiler flags used only in building this package,
10311 # and details of which tests are built.
10313 cdl_component CYGPKG_ERROR_OPTIONS {
10314 # There is no associated value.
10318 # Additional compiler flags
10319 # This option modifies the set of compiler flags for
10320 # building the error package. These flags are used in addition
10321 # to the set of global flags.
10323 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10325 # No user value, uncomment the following line to provide one.
10327 # value_source default
10328 # Default value: ""
10331 # Suppressed compiler flags
10332 # This option modifies the set of compiler flags for
10333 # building the error package. These flags are removed from
10334 # the set of global flags if present.
10336 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10338 # No user value, uncomment the following line to provide one.
10339 # user_value -Wno-pointer-sign
10340 # value_source default
10341 # Default value: -Wno-pointer-sign