1 # ====================================================================
3 # triton270_91c111_drivers.cdl
5 # Ethernet drivers - support for LAN91C111 ethernet controller
6 # on the Ka-RO TRITON board.
8 # ====================================================================
9 #####ECOSGPLCOPYRIGHTBEGIN####
10 ## -------------------------------------------
11 ## This file is part of eCos, the Embedded Configurable Operating System.
12 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
14 ## eCos is free software; you can redistribute it and/or modify it under
15 ## the terms of the GNU General Public License as published by the Free
16 ## Software Foundation; either version 2 or (at your option) any later version.
18 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
19 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
20 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
23 ## You should have received a copy of the GNU General Public License along
24 ## with eCos; if not, write to the Free Software Foundation, Inc.,
25 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
27 ## As a special exception, if other files instantiate templates or use macros
28 ## or inline functions from this file, or you compile this file and link it
29 ## with other works to produce a work based on this file, this file does not
30 ## by itself cause the resulting work to be covered by the GNU General Public
31 ## License. However the source code for this file must still be made available
32 ## in accordance with section (3) of the GNU General Public License.
34 ## This exception does not invalidate any other reasons why a work based on
35 ## this file might be covered by the GNU General Public License.
37 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
38 ## at http://sources.redhat.com/ecos/ecos-license/
39 ## -------------------------------------------
40 #####ECOSGPLCOPYRIGHTEND####
41 # ====================================================================
42 ######DESCRIPTIONBEGIN####
44 # Author(s): Jordi Colomer <jco@ict.es>, usteinkohl
45 # Contributors: Jordi Colomer, usteinkohl
46 # Date: 14th January 2003
48 #####DESCRIPTIONEND####
50 # ====================================================================
52 cdl_package CYGPKG_DEVS_ETH_ARM_XSCALE_TRITON270_91C111 {
54 display "TRITON SMC91C111 ethernet driver"
56 parent CYGPKG_IO_ETH_DRIVERS
57 active_if CYGPKG_IO_ETH_DRIVERS
58 # active_if CYGPKG_HAL_ARM_XSCALE_TRITON_STK
61 # chip wired in 16-bit mode, no EEPROM
62 implements CYGHWR_NET_DRIVERS
63 implements CYGHWR_NET_DRIVER_ETH0
64 implements CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED
65 implements CYGINT_DEVS_ETH_SMSC_LAN91C111_STATIC_ESA
67 requires CYGPKG_DEVS_ETH_SMSC_LAN91C111
68 description "Ethernet driver for TRITON boards."
73 puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
74 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91C111_INL <cyg/io/devs_triton270_91c111.inl>"
75 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91C111_CFG <pkgconf/devs_eth_arm_xscale_triton270_91c111.h>"
76 puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
79 # Arguably this should do in the generic package
80 # but then there is a logic loop so you can never enable it.
82 cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91C111_REQUIRED {
83 display "SMSC LAN91C111 driver required"
86 cdl_option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_NAME {
87 display "Device name for the ethernet driver"
89 default_value {"\"eth0\""}
91 This option sets the name of the ethernet device for the
95 cdl_option CYGDAT_DEVS_ETH_ARM_XSCALE_TRITON_ESA {
96 display "The ethernet station address (MAC)"
98 default_value {"{0x00, 0x0c, 0xc6, 0x69, 0x00, 0x00}"}
99 description "A static ethernet station address.
100 Caution: Booting two systems with the same MAC on the same
101 network, will cause severe conflicts."
102 active_if !CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA
105 cdl_option CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_1WIRE_ESA {
106 display "Use the 1-WIRE device ESA (MAC address)"
110 Use the ESA that is stored in the 1wire device instead of
115 cdl_option CYGSEM_DEVS_ETH_ARM_XSCALE_TRITON_REDBOOT_ESA {
116 display "Use the RedBoot ESA (MAC address)"
120 Use the ESA that is stored as a RedBoot variable instead of
126 # EOF triton_eth_drivers.cdl