1 # ====================================================================
3 # edosk2674_eth_drivers.cdl
5 # Ethernet drivers - support for LAN91CXX ethernet controller
6 # on the EDOSK-2674 board.
8 # ====================================================================
9 #####ECOSGPLCOPYRIGHTBEGIN####
10 ## -------------------------------------------
11 ## This file is part of eCos, the Embedded Configurable Operating System.
12 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
14 ## eCos is free software; you can redistribute it and/or modify it under
15 ## the terms of the GNU General Public License as published by the Free
16 ## Software Foundation; either version 2 or (at your option) any later version.
18 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
19 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
20 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
23 ## You should have received a copy of the GNU General Public License along
24 ## with eCos; if not, write to the Free Software Foundation, Inc.,
25 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
27 ## As a special exception, if other files instantiate templates or use macros
28 ## or inline functions from this file, or you compile this file and link it
29 ## with other works to produce a work based on this file, this file does not
30 ## by itself cause the resulting work to be covered by the GNU General Public
31 ## License. However the source code for this file must still be made available
32 ## in accordance with section (3) of the GNU General Public License.
34 ## This exception does not invalidate any other reasons why a work based on
35 ## this file might be covered by the GNU General Public License.
37 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
38 ## at http://sources.redhat.com/ecos/ecos-license/
39 ## -------------------------------------------
40 #####ECOSGPLCOPYRIGHTEND####
41 # ====================================================================
42 ######DESCRIPTIONBEGIN####
44 # Author(s): yoshinori sato
45 # Contributors: yoshinori sato
48 #####DESCRIPTIONEND####
50 # ====================================================================
52 cdl_package CYGPKG_DEVS_ETH_H8300_EDOSK2674 {
54 display "EDOSK-2674 SMC91C96 ethernet driver"
56 parent CYGPKG_IO_ETH_DRIVERS
57 active_if CYGPKG_IO_ETH_DRIVERS
58 active_if CYGPKG_HAL_H8300_H8S_EDOSK2674
60 implements CYGHWR_NET_DRIVERS
61 implements CYGHWR_NET_DRIVER_ETH0
62 implements CYGINT_DEVS_ETH_SMSC_LAN91CXX_REQUIRED
63 implements CYGSEM_DEVS_ETH_SMSC_LAN91CXX_8_BIT
65 description "Ethernet driver for EDOSK-2674 boards."
70 puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
71 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91CXX_INL <cyg/io/devs_eth_edosk2674.inl>"
72 puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_SMSC_LAN91CXX_CFG <pkgconf/devs_eth_h8300_edosk2674.h>"
73 puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
76 # Arguably this should do in the generic package
77 # but then there is a logic loop so you can never enable it.
79 cdl_interface CYGINT_DEVS_ETH_SMSC_LAN91CXX_REQUIRED {
80 display "SMSC LAN91CXX driver required"
83 cdl_option CYGDAT_DEVS_ETH_H8300_EDOSK2674_NAME {
84 display "Device name for the ethernet driver"
86 default_value {"\"eth0\""}
88 This option sets the name of the ethernet device for the
92 cdl_option CYGDAT_DEVS_ETH_H8300_EDOSK2674_ESA {
93 display "The ethernet station address (MAC)"
95 default_value {"{0x12, 0x13, 0x14, 0x15, 0x16, 0x17}"}
96 description "A static ethernet station address.
97 Caution: Booting two systems with the same MAC on the same
98 network, will cause severe conflicts."
99 active_if !CYGSEM_DEVS_ETH_ARM_FLEXANET_REDBOOT_ESA
102 cdl_option CYGSEM_DEVS_ETH_H8300_EDOSK2674_ETH0_SET_ESA {
103 display "Use the RedBoot ESA (MAC address)"
107 Use the ESA that is stored as a RedBoot variable instead of
113 # EOF flexanet_eth_drivers.cdl