1 # ====================================================================
5 # ====================================================================
6 #####ECOSGPLCOPYRIGHTBEGIN####
7 ## -------------------------------------------
8 ## This file is part of eCos, the Embedded Configurable Operating System.
9 ## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
11 ## eCos is free software; you can redistribute it and/or modify it under
12 ## the terms of the GNU General Public License as published by the Free
13 ## Software Foundation; either version 2 or (at your option) any later version.
15 ## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
16 ## WARRANTY; without even the implied warranty of MERCHANTABILITY or
17 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
20 ## You should have received a copy of the GNU General Public License along
21 ## with eCos; if not, write to the Free Software Foundation, Inc.,
22 ## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
24 ## As a special exception, if other files instantiate templates or use macros
25 ## or inline functions from this file, or you compile this file and link it
26 ## with other works to produce a work based on this file, this file does not
27 ## by itself cause the resulting work to be covered by the GNU General Public
28 ## License. However the source code for this file must still be made available
29 ## in accordance with section (3) of the GNU General Public License.
31 ## This exception does not invalidate any other reasons why a work based on
32 ## this file might be covered by the GNU General Public License.
34 ## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
35 ## at http://sources.redhat.com/ecos/ecos-license/
36 ## -------------------------------------------
37 #####ECOSGPLCOPYRIGHTEND####
39 cdl_package CYGPKG_HAL_ARM_TX51KARO {
40 display "Ka-Ro TX51 module"
41 parent CYGPKG_HAL_ARM_MX51
42 requires CYGINT_ISO_CTYPE
45 define_header hal_arm_tx51.h
47 This HAL platform package provides generic
48 support for the Ka-Ro electronics TX51 module."
51 implements CYGINT_HAL_DEBUG_GDB_STUBS
52 implements CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
53 implements CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
55 implements CYGHWR_HAL_ARM_SOC_UART1
56 implements CYGHWR_HAL_ARM_SOC_UART2
57 implements CYGHWR_HAL_ARM_SOC_UART3
58 implements CYGHWR_HAL_ARM_SOC_UART4
60 requires {CYGBLD_BUILD_REDBOOT == 1}
63 puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H <pkgconf/hal_arm.h>"
64 puts $::cdl_system_header "#define CYGBLD_HAL_VARIANT_H <pkgconf/hal_arm_soc.h>"
65 puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_arm_tx51.h>"
66 puts $::cdl_system_header "#define CYGBLD_HAL_PLF_DEFS_H <cyg/hal/karo_tx51.h>"
67 puts $::cdl_header "#define HAL_PLATFORM_CPU \"Freescale i.MX51 based\""
68 puts $::cdl_header "#define HAL_PLATFORM_BOARD \"Ka-Ro TX51 processor module\""
69 puts $::cdl_header "#define HAL_PLATFORM_MACHINE_TYPE 2529"
70 puts $::cdl_header "#define HAL_ARCH_PROGRAM_NEW_STACK tx51_program_new_stack"
73 cdl_component CYG_HAL_STARTUP {
74 display "Startup type"
76 default_value { "ROMRAM" }
77 legal_values { "ROMRAM" }
79 define -file system.h CYG_HAL_STARTUP
81 The only startup type allowed is ROMRAM, since this will allow
82 the program to exist in ROM, but be copied to RAM during startup
83 which is required to boot from NAND flash."
86 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
87 display "Diagnostic serial port baud rate"
89 legal_values 9600 19200 38400 57600 115200
92 This option selects the baud rate used for the console port.
93 Note: this should match the value chosen for the GDB port if the
94 console and GDB port are the same."
97 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
98 display "GDB serial port baud rate"
100 legal_values 9600 19200 38400 57600 115200
103 This option selects the baud rate used for the GDB port.
104 Note: this should match the value chosen for the console port if the
105 console and GDB port are the same."
108 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
109 display "Number of communication channels on the TX51"
114 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
115 display "Debug serial port"
116 active_if CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
118 legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
121 The TX51 provides access to three serial ports. This option
122 chooses which port will be used to connect to a host
126 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
127 display "Default console channel."
129 legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
133 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
134 display "Console serial port"
135 active_if CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
137 legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
138 default_value CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
140 The TX51 provides access to three serial ports. This option
141 chooses which port will be used for console output."
144 cdl_component CYGBLD_GLOBAL_OPTIONS {
145 display "Global build options"
149 Global build options including control over
150 compiler flags, linker flags and choice of toolchain."
155 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
156 display "Global command prefix"
159 default_value { "arm-926ejs-linux-gnu" }
161 This option specifies the command prefix used when
162 invoking the build tools."
165 cdl_option CYGBLD_GLOBAL_CFLAGS {
166 display "Global compiler flags"
169 requires CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
170 default_value { "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe" }
172 This option controls the global compiler flags which are used to
173 compile all packages by default. Individual packages may define
174 options which override these global flags."
177 cdl_option CYGBLD_GLOBAL_LDFLAGS {
178 display "Global linker flags"
181 default_value { "-Wl,--gc-sections -Wl,-static -O2 -nostdlib" }
183 This option controls the global linker flags. Individual
184 packages may define options which override these global flags."
188 cdl_component CYGPKG_HAL_ARM_TX51_OPTIONS {
189 display "Ka-Ro electronics TX51 module build options"
192 requires { CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0 }
194 Package specific build options including control over
195 compiler flags used only in building this package,
196 and details of which tests are built."
198 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_SIZE {
201 legal_values { 0x10000000 0x08000000 0x04000000 }
202 default_value { 0x08000000 }
203 # This is what I would like to do, but define_proc currently does not allow for
204 # accessing variables
205 # display "SDRAM size in MiB"
206 # legal_values { 128 64 }
207 # default_value { 128 }
209 # puts $::cdl_header "#define CYGNUM_HAL_ARM_TX51_SDRAM_SIZE \
210 # [format "0x%08x" [expr $CYGNUM_HAL_ARM_TX51_SDRAM_SIZE * 1048576]]"
213 This option specifies the SDRAM size of the TX51 module."
216 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_CLK {
217 display "SDRAM clock"
219 legal_values { 166 200 }
220 default_value { 166 }
222 This option specifies the SDRAM clock im MHz of the TX51 module."
225 cdl_option CYGOPT_HAL_ARM_TX51_DEBUG {
226 display "Enable low level debugging with LED"
228 default_value { false }
230 This option enables low level debugging by blink codes
234 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_ADD {
235 display "Additional compiler flags"
240 This option modifies the set of compiler flags for
241 building the TX51 HAL. These flags are used in addition
242 to the set of global flags."
245 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_REMOVE {
246 display "Suppressed compiler flags"
251 This option modifies the set of compiler flags for
252 building the TX51 HAL. These flags are removed from
253 the set of global flags if present."
256 cdl_option CYGHWR_MX51_LCD_LOGO {
257 display "Show a splash screen from the FIS partition: 'logo'"
258 active_if { CYGPKG_DEVS_IMX_IPU }
261 When this option is enabled, RedBoot will look for a flash partition
262 named 'logo' and display the contents of this partition as initial
264 compile mx51_fastlogo.c
268 cdl_component CYGHWR_MEMORY_LAYOUT {
269 display "Memory layout"
272 calculated { "arm_tx51_romram" }
274 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
275 display "Memory layout linker script fragment"
278 define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
279 calculated { "<pkgconf/mlt_arm_tx51_romram.ldi>" }
282 cdl_option CYGHWR_MEMORY_LAYOUT_H {
283 display "Memory layout header file"
286 define -file system.h CYGHWR_MEMORY_LAYOUT_H
287 calculated { "<pkgconf/mlt_arm_tx51_romram.h>" }
291 cdl_option CYGSEM_HAL_ROM_MONITOR {
292 display "Behave as a ROM monitor"
295 parent CYGPKG_HAL_ROM_MONITOR
296 requires { CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" }
298 Enable this option if this program is to be used as a ROM monitor,
299 i.e. applications will be loaded into RAM on the TX51 module, and this
300 ROM monitor may process exceptions or interrupts generated from the
301 application. This enables features such as utilizing a separate
302 interrupt stack when exceptions are generated."
305 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
306 display "Work with a ROM monitor"
308 legal_values { "Generic" "GDB_stubs" }
309 default_value { CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 }
310 parent CYGPKG_HAL_ROM_MONITOR
311 requires { CYG_HAL_STARTUP == "RAM" }
313 Support can be enabled for different varieties of ROM monitor.
314 This support changes various eCos semantics such as the encoding
315 of diagnostic output, or the overriding of hardware interrupt
317 Firstly there is \"Generic\" support which prevents the HAL
318 from overriding the hardware vectors that it does not use, to
319 instead allow an installed ROM monitor to handle them. This is
320 the most basic support which is likely to be common to most
321 implementations of ROM monitor.
322 \"GDB_stubs\" provides support when GDB stubs are included in
323 the ROM monitor or boot ROM."
326 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
327 display "Redboot HAL options"
330 parent CYGPKG_REDBOOT
331 active_if CYGPKG_REDBOOT
333 This option lists the target's requirements for a valid Redboot
336 compile -library=libextras.a redboot_cmds.c
338 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
339 display "Build Redboot ROM binary image"
340 active_if CYGBLD_BUILD_REDBOOT
343 description "This option enables the conversion of the Redboot ELF
344 image to a binary image suitable for ROM programming."
347 <PREFIX>/bin/redboot.bin : <PREFIX>/bin/redboot.elf
348 $(OBJCOPY) --strip-debug $< $(@:.bin=.img)
349 $(OBJCOPY) -O srec $< $(@:.bin=.srec)
350 $(OBJCOPY) -O binary $< $@
351 $(COMMAND_PREFIX)nm $< | awk 'NF == 3 {print}' | sort > $(<:.elf=.map)
356 cdl_component CYGPKG_REDBOOT_HAL_TX51_OPTIONS {
357 display "Redboot HAL variant options"
360 parent CYGPKG_REDBOOT
361 active_if CYGPKG_REDBOOT
364 requires { CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000 }
366 puts $::cdl_header "#define CYGHWR_REDBOOT_ARM_TRAMPOLINE_ADDRESS 0x00001f00"