--- /dev/null
+ RedBoot for Starter-Kit V (STK5)
+ Ka-Ro Electronics GmbH
+
+ ===========================================================
+ v1.5.1 (2011-11-16)
+ Changes:
+ Fix FEC driver handling of 10BaseT link
+
+ v1.5.0 (2010-06-16)
+ Changes:
+ Added support for TX53
+
+ v1.4.9 (2010-11-19)
+ Changes:
+ TX25:
+ Added support for redundant WinCE image load
+
+ v1.4.8 (2010-10-29)
+ Changes:
+ TX25:
+ Added support for splash screen, enabled with:
+ fconfig bootsplash_enable true
+ LCD parameters:
+ Name Default Value Description
+ lcd_bpp: 16 LCD color depth (only 16bpp for now)
+ lcd_buffer_addr: -2113929216 LCD frame buffer address (hex: 0x82000000)
+ lcd_clk_period: 33333 Pixel clock period (in ps)
+ lcd_clk_polarity: false Pixel clock polarity active low
+ lcd_panel_width: 640 LCD panel width (in pixels)
+ lcd_panel_height: 480 LCD panel height (in pixels)
+ lcd_hsync_polarity: true HSYNC polarity active low
+ lcd_hsync_width: 64 HSYNC pulse width (in pixels): 1 .. 64
+ lcd_margin_left: 96 Left margin (in pixels): 1 .. 256
+ lcd_margin_right: 80 Right margin (in pixels): 1 .. 256
+ lcd_margin_top: 46 Top margin (in scan lines): 0 .. 255
+ lcd_margin_bottom: 39 Bottom margin (in scan lines): 0 .. 255
+ lcd_vsync_polarity: true VSYNC polarity active low
+ lcd_vsync_width: 3 VSYNC pulse width (in scan lines): 0 .. 63
+
+ Image data is loaded from the flash partition named 'logo' and
+ can be stored either as a binary dump or in Windows .bmp
+ format with 24bpp.
+
+ Renamed config/TX25-40x0.ecc to config/TX25-40x1.ecc to be in
+ sync with the module name
+
+ v1.4.7 (2010-06-02)
+ Changes:
+ TX51:
+ Added support for TX51-80x2 and TX51-80x1 (SDRAM clock selectable via cdl)
+
+ v1.4.6 (2010-03-04)
+ Changes:
+ TX27:
+ Fixed SDRAM timing according to application note from Micron.
+ TX51:
+ Fixed display of reset reason.
+ Corrected DEBUG LED settings
+ all modules:
+ Disabled FIS CRC check to facilitate update of the Linux
+ partition from within Linux (see RedBoot/README)
+
+ v1.4.5 (2010-01-21)
+ Changes:
+ Added support for TX51-80x0
+
+ v1.4.4 (2009-09-15)
+ Changes:
+ Corrected SDRAM timing setup for TX25 that was accidentally broken
+ in the previous release
+
+ v1.4.3 (2009-08-19)
+ Changes:
+ switched to unified source tree for TX25,TX27,TX37
+ fixing some issues with bad block handling on TX27
+
+ v1.4.2 (2009-04-29)
+ Changes:
+ Corrected the SDRAM initialisation for TX27-4021 (128MiB SDRAM)
+ module.
+
+ v1.4.1 (2009-04-24)
+ Changes:
+ Fixed a bug that lead to writing the RedBoot config partition on
+ every startup which would lead to excessive wearout of the flash.
+ The patch ecos-tx27-update.patch should be applied before compiling
+ RedBoot from source.
+
+ v1.4 (2009-03-20)
+ Changes:
+ + 'RedBoot config' partition merged with 'FIS Directory' into one
+ erase block
+ + improved bad block handling
+ + Flash partitioning changed due to the above
+ NOTE: The Linux kernel expects the RedBoot partition table at a
+ fixed block in flash determined by a configuration option.
+ Thus the new RedBoot version will only work with the new
+ Linux kernel.
+ + MAC address stored in processor internal fuse array
+ + new command: 'nand bad' to manually update the BBT