From: Lothar Waßmann <LW@KARO-electronics.de>
Date: Fri, 8 Aug 2014 13:28:23 +0000 (+0200)
Subject: karo: tx51: update ReleaseNotes.txt
X-Git-Tag: KARO-TX51-2014-08-08
X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-redboot.git;a=commitdiff_plain;h=ae9e80f1218f38ac0d27c1be5955a4593f3c8a5b

karo: tx51: update ReleaseNotes.txt
---

diff --git a/ReleaseNotes.txt b/ReleaseNotes.txt
index 98b5ce11..5aef53a8 100755
--- a/ReleaseNotes.txt
+++ b/ReleaseNotes.txt
@@ -1,13 +1,39 @@
   RedBoot for Starter-Kit V (STK5)
   Ka-Ro Electronics GmbH
 
+  The RedBoot source code is available via git from:
+  git://git.karo-electronics.de/karo-tx-redboot.git
+  in the 'master' branch
+
   ===========================================================
+ v1.5.8 (2014-08-08)
+  git tag: KARO-TX51-2014-08-08
+  Changes:
+    TX51:
+      - explicitly program the padctl settings for SDRAM and NAND from
+        the DCD to ensure correct settings after soft reset.
+      - reduce DSE values for SDRAM and NAND control lines for better
+        error margins in NAND detection and SDRAM stress test.
+      - Revert the change of the NFC clock frequency from the previous
+        release, as this is not necessary any more with the improved
+        pad settings.
+
  v1.5.7 (2014-07-01)
+  git tag: KARO-TX53-2014-04-09
   Changes:
     TX51:
       - reduce the NFC clock frequency to 16MHz to prevent NAND chip
         detection errors at cold temperatures with the Toshiba
         TC58NYG0S3EBAI4 flash chips
+    TX53:
+      - adjust core voltage according to selected frequency upon boot
+      - remove bogus DDR3 Write leveling calibration that is not
+        required due to the PCB layout and does not work with the
+        NT5CB128M16FP-DII chips
+
+    TX27:
+      - committed the missing source code changes for v1.5.5 that were
+        only committed to the legacy CVS repository but missing in git.
 
  v1.5.6 (2013-08-19)
   Changes: