1 ======================================================================
2 Changes for U-Boot 1.0.0:
3 ======================================================================
5 * Add CompactFlash support for NSCU
7 * Fix PCI problems on PPChameleonEVB
9 * TRAB auto-update: Base decision if we have to strip the image
10 header on image type as encoded in the header
11 (include image type patch by Martin Krause, 17 Oct 2003)
13 * Patches by Xianghua Xiao, 15 Oct 2003:
15 - Added Motorola CPU 8540/8560 support (cpu/85xx)
16 - Added Motorola MPC8540ADS board support (board/mpc8540ads)
17 - Added Motorola MPC8560ADS board support (board/mpc8560ads)
19 * Fix flash timings on TRAB board
21 * Make sure HUSH is initialized for running auto-update scripts
23 * Make 5200 reset command _really_ reset the board, without running
24 any other code after it
26 * Fix errors with flash erase when range spans across banks
27 that are mapped in reverse order
29 * Fix flash mapping and display on P3G4 board
31 * Patch by Kyle Harris, 15 Jul 2003:
32 - add support for Intel IXP425 CPU
33 - add support for IXDP425 eval board
35 * Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
38 * Patch by Steven Scholz, 10 Oct 2003
39 - Add support for Altera FPGA ACEX1K
41 * Patches by Thomas Lange, 09 Oct 2003:
42 - fix cmd_ide.c for non ppc boards (read/write functions did not
44 - fix for shannon board
45 - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
46 - Endian swap ATA identity for all big endian CPUs, not just PPC
47 - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
49 - add support for dbau1x00 board (MIPS32)
51 * Patch by Sangmoon Kim, 07 Oct 2003:
52 add support for debris board
54 * Patch by Martin Krause, 09 Oct 2003:
56 - /board/trab/rs485.c: correct baudrate
57 - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
58 udelay(); fix some timing problems with adc controller
59 - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
60 modify commands: touch and buzzer
62 * Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
63 (quick & dirty workaround for rogue pointer problem in get_vfatname());
64 Use direct function calls for auto_update instead of hush commands
66 * Patch by Scott McNutt, 04 Oct 2003:
67 - add support for Altera Nios-32 CPU
68 - add support for Nios Cyclone Development Kit (DK-1C20)
70 * Patch by Steven Scholz, 29 Sep 2003:
71 - A second parameter for bootm overwrites the load address for
72 "Standalone Application" images.
73 - bootm sets environment variable "filesize" to the resulting
74 (uncompressed) data length for "Standalone Application" images
75 when autostart is set to "no". Now you can do something like
76 if bootm $fpgadata $some_free_ram ; then
77 fpga load 0 $some_free_ram $filesize
80 * Patch by Denis Peter, 25 Sept 2003:
81 add support for the MIP405 Rev. C board
83 * Patch by Yuli Barcohen, 25 Sep 2003:
84 add support for Zephyr Engineering ZPC.1900 board
86 * Patch by Anders Larsen, 23 Sep 2003:
87 add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
88 implemented for the x86 architecture)
90 * Patch by Sangmoon Kim, 23 Sep 2003:
91 fix pll_pci_to_mem_multiplier table for MPC8245
93 * Patch by Anders Larsen, 22 Sep 2003:
94 enable timed autoboot on PXA
96 * Patch by David Müller, 22 Sep 2003:
97 - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
98 returns correct libgcc file path
99 - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
100 time on s3c24x0 systems
102 * Patch by Jon Diekema, 19 Sep 2003:
103 - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
104 link state to the fault LED.
105 - In NetLoop, make the Fault LED reflect the link status. The link
106 status gets updated on entry, and on timeouts.
108 * Patch by Anders Larsen, 18 Sep 2003:
109 allow mkimage to build and run on Cygwin-hosted systems
111 * Patch by Frank Müller, 18 Sep 2003:
112 use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
115 * Patch by Pantelis Antoniou, 16 Sep 2003:
116 add tool to compute fileds in the PLPRCR register for MPC86x
118 * Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
120 * Fix build problems under FreeBSD
122 * Add generic filesystem image type
124 * Make fatload set filesize environment variable
126 * enable basic / medium / high-end configurations for PPChameleonEVB
129 * enable TFTP client code to specify to the server the desired
130 timeout value (see RFC-2349)
132 * Improve SDRAM setup for TRAB board
134 * Suppress all output with splashscreen configured only if "splashimage"
137 * Fix problems with I2C support for mpc5200
139 * Adapt TRAB configuration and auto_update to new memory layout
141 * Add configuration for wtk board
143 * Add support for the Sharp LQ065T9DR51U LCD display
145 * Patch by Rune Torgersen, 17 Sep 2003:
146 - Fixes for MPC8266 default config
147 - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
149 * Patches by Jon Diekema, 17 Sep 2003:
150 - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
153 - adjust "help" output
155 * Patches by Anders Larsen, 17 Sep 2003:
156 - fix spelling errors
157 - set GD_FLG_DEVINIT flag only after device function pointers
159 - Allow CFG_ALT_MEMTEST on systems where address zero isn't
161 - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
162 - trigger watchdog while waiting in serial driver
164 * Add auto-update code for TRAB board using USB memory sticks,
165 support new configuration with more memory
167 * disable MPC5200 bus pipelining as workaround for bus contention
169 * Modify XLB arbiter priorities on MPC5200 so all devices use same
170 priority; configure critical interrupts to be handled like external
173 * Make IPB clock on MGT5100/MPC5200 configurable in board config file;
174 go back to 66 MHz for stability
176 * Patches by Jon Diekema, 15 Sep 2003:
177 - add description for missing CFG_CMD_* entries in the README file
180 * Patch by Gleb Natapov, 14 Sep 2003:
181 enable watchdog support for all MPC824x boards that have a watchdog
183 * On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
184 "Non-octet Aligned Frame" errors we see at 100 Mbps
186 * Patch by Sharad Gupta, 14 Sep 2003:
187 fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
189 * Patch by llandre, 11 Sep 2003:
190 update configuration for PPChameleonEVB board
192 * Patch by David Müller, 13 Sep 2003:
193 various changes to VCMA9 board specific files
195 * Add I2C support for MGT5100 / MPC5200
197 * Patch by Rune Torgersen, 11 Sep 2003:
198 Changed default memory option on MPC8266ADS to NOT be Page Based
199 Interleave, since this doesn't work very well with the standard
202 * Patch by George G. Davis, 12 Sep 2003:
203 fix Makefile settings for sk98 driver
205 * Patch by Stefan Roese, 12 Sep 2003:
206 - new boards added: DP405, HUB405, PLU405, VOH405
207 - some esd boards updated
208 - cpu/ppc4xx/sdram.c: disable memory controller before setting
210 - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
212 * Patch by Martin Krause, 11 Sep 2003:
213 add burn-in tests for TRAB board
215 * Enable instruction cache on MPC5200 board
217 * Patch by Denis Peter, 11 Sep 2003:
218 - fix USB data pointer assignment for bulk only transfer.
219 - prevent to display erased directories in FAT filesystem.
221 * Change output format for NAND flash - make it look like for other
224 ======================================================================
225 Changes for U-Boot 0.4.8:
226 ======================================================================
228 * Add I2C and RTC support for RMU board
230 * Patches by Denis Peter, 9 Sep 2003:
231 add FAT support for IDE, SCSI and USB
233 * Patches by Gleb Natapov, 2 Sep 2003:
234 - cleanup of POST code for unsupported architectures
235 - MPC824x locks way0 of data cache for use as initial RAM;
236 this patch unlocks it after relocation to RAM and invalidates
239 * Patch by Gleb Natapov, 30 Aug 2003:
240 new I2C driver for mpc107 bridge. Now works from flash.
242 * Patch by Dave Ellis, 11 Aug 2003:
243 - JFFS2: fix typo in common/cmd_jffs2.c
244 - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
245 - JFFS2: remove node version 0 warning
246 - JFFS2: accept JFFS2 PADDING nodes
247 - SXNI855T: add AM29LV800 support
248 - SXNI855T: move environment from EEPROM to flash
249 - SXNI855T: boot from JFFS2 in NOR or NAND flash
251 * Patch by Bill Hargen, 11 Aug 2003:
252 fixes for I2C on MPC8240
253 - fix i2c_write routine
255 - eliminates use of global variables, plus dead code, cleanup.
257 * Add support for USB Mass Storage Devices (BBB)
258 (tested with USB memory sticks only)
260 * Avoid flicker on TRAB's VFD
262 * Add support for SK98xx driver
264 * Add PCI support for SL8245 board
266 * Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
267 or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
268 Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
270 * Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
271 to allow for more accurate baudrate settings
272 (error now 0.7% at 115 kbps, instead of 3.5% before)
274 * Patch by Andreas Mohr, 4 Sep 2003:
275 Fix a lot of spelling errors
277 * Add support for PPChameleon Eval Board
279 * Add support for P3G4 board
281 * Fix problem with MGT5100 FEC driver: add "early" MAC address
284 * Patch by Yuli Barcohen, 7 Aug 2003:
285 check BCSR to detect if the board is configured in PCI mode
287 ======================================================================
288 Changes for U-Boot 0.4.7:
289 ======================================================================
291 * Patch by Raghu Krishnaprasad, 7 Aug 2003:
292 add support for Adder II MPC852T module
294 * Patch by George G. Davis, 19 Aug 2003:
295 fix TI Innovator/OMAP1510 pin configs
297 * Patches by Kshitij, 18 Aug 2003
298 - add support for arm926ejs cpu core
299 - add support for TI OMAP 1610 Innovator Board
301 * Patch by Yuli Barcohen, 14 Aug 2003:
302 add support for bzip2 uncompression
304 * Add GCC library to examples/Makefile so GCC utility functions will
307 * Add I2C and RTC support for RMU board using software I2C driver
308 (because of better response to iprobe command); fix problem with
311 * Patch by Matthias Fuchs, 28 Aug 2003:
312 Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
313 CONFIG_BOOTP_MAKS (see README).
315 * Fix ICU862 environment problem
317 * Fix RAM size detection for RMU board
319 * Implement "reset" for MGT5100/MPC5200 systems
321 ======================================================================
322 Changes for U-Boot 0.4.6:
323 ======================================================================
325 * Make Ethernet autonegotiation on INCA-IP work for all clock rates;
326 allow selection of clock frequency as "make" target
328 * Implement memory autosizing code for IceCube boards
330 * Configure network port on INCA-IP for autonegotiation
332 * Fix overflow problem in network timeout code
334 * Patch by Richard Woodruff, 8 Aug 2003:
335 Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
337 ======================================================================
338 Changes for U-Boot 0.4.5:
339 ======================================================================
341 * Update for TQM board defaults:
342 disable clocks_in_mhz, enable boot count limit
344 * Removed tools/gdb from "make all" target. Added make target "gdbtools"
345 in toplevel directory instead. Removed astest.c from tools/gdb because
346 it is no longer relevant.
348 * Fix PCI support for MPC5200 / IceCube Board
350 * Map ISP1362 USB OTG controller for NSCU board
352 * Patch by Brad Parker, 02 Aug 2003:
353 fix sc520_cdp problems
355 * Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
357 * Allow erase command to cross flash bank boundaries
359 * Patch by Scott McNutt, 21 Jul 2003:
360 Add support for LynuxWorks Kernel Downloadable Images (KDIs).
361 Both LynxOS and BlueCat linux KDIs are supported.
363 * Patch by Richard Woodruff, 25 Jul 2003:
364 use more reliable reset for OMAP/925T
366 * Patch by Nye Liu, 25 Jul 2003:
369 * Patch by Richard Woodruff, 24 Jul 2003:
370 Fixes for cmd_nand.c:
371 - Fixed null dereferece which could result in incorrect ECC values.
372 - Added support for devices with no Ready/Busy signal hooked up.
373 - Added OMAP1510 read/write protect handling.
374 - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
376 - Switched default ECC to be JFFS2.
378 * Allow crc32 to be used at address 0x000
380 * Provide consistent interface to standalone applications to access
381 the 'global_data' structure
382 Provide a doc/README.standalone more useful to users/developers.
384 * Make IceCube MGT5100 FEC driver work
386 * Implement new mechanism to export U-Boot's functions to standalone
387 applications: instead of using (PPC-specific) system calls we now
388 use a jump table; please see doc/README.standalone for details
390 * Patch by Dave Westwood, 24 Jul 2003:
391 added support for Unity OS (a proprietary OS)
393 * Patch by Detlev Zundel, 23 Jul 2003:
394 add "imls" command to print flash table of contents
396 * Fix cold boot detection for log buffer reset
398 * Return error for invalid length specifiers with "cp.X" etc.
400 * Fix startup problem on MIPS
402 * Allow for CONFIG_SPLASH_SCREEN even when no explicit
403 bitmap support is configured
405 * Patch by Bill Hargen, 18 Jul 2003:
406 - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
408 * Patch by Denis Peter, 18 Jul 2003:
409 - fix memory configuration for MIP405T
410 - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
412 * Cleanup of TQM82xx configurations; use "official" board types
413 to make selection easier.
415 * Patch by Martin Krause, 17 Jul 2003:
416 add delay to get I2C working with "imm" command and s3c24x0_i2c.c
418 * Patch by Richard Woodruff, 17 July 03:
419 - Fixed bug in OMAP1510 baud rate divisor settings.
421 * Patch by Nye Liu, 16 July 2003:
423 - add MPC86xADS support (uses MPC86xADS.h)
424 - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
426 o BRG changes (EXTAL/XTAL restricted to 10MHz)
427 o don't trust gclk() software measurement by default, depend on
429 - add DRAM SIMM not installed detection
430 - use more "correct" SDRAM initialization sequence
431 - allow different SDRAM sizes (8xxADS has 8M)
433 - remove unused MAMR defines from FADS860T.h (all done in fads.c)
434 - rename MAMR/MBMR defines to be more consistent. Should eventually
435 be merged into MxMR to better reflect the PowerQUICC datasheet.
437 * Patch by Yuli Barcohen, 16 Jul 2003:
438 support new Motorola PQ2FADS-ZU evaluation board which replaced
439 MPC8260ADS and MPC8266ADS
441 ======================================================================
442 Changes for U-Boot 0.4.4:
443 ======================================================================
445 * Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
447 * Add support for MGT5100 and MPC5200 processors
449 * Patch by Lutz Dennig, 15 Jul 2003:
450 update for R360MPI board
452 ======================================================================
453 Changes for U-Boot 0.4.3:
454 ======================================================================
456 * Patches by Kshitij, 04 Jul 2003
457 - added support for arm925t cpu core
458 - added support for TI OMAP 1510 Innovator Board
460 * Patches by Martin Krause, 14 Jul 2003:
461 - add I2C support for s3c2400 systems (trab board)
462 - (re-) add "ping" to command table
464 * Fix handling of "slow" POST routines
466 * Patches by Yuli Barcohen, 13 Jul 2003:
467 - Correct flash and JFFS2 support for MPC8260ADS
468 - fix PVR values and clock generation for PowerQUICC II family
471 * Patch by Bernhard Kuhn, 08 Jul 2003:
472 - add support for M68K targets
474 * Patch by Ken Chou, 3 Jul:
475 - Fix PCI config table for A3000
476 - Fix iobase for natsemi.c
477 (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
479 * Allow to enable "slow" POST routines by key press on power-on
480 * Fix temperature dependend switching of LCD backlight on LWMON
481 * Tweak output format for LWMON
483 * Patch by Stefan Roese, 11 Jul 2003:
484 - Fix bug in CONFIG_VERSION_VARIABLE.
485 - AR405 config updated.
486 - OCRTC/ORSG: bsp command added.
489 ======================================================================
490 Changes for U-Boot 0.4.2:
491 ======================================================================
493 * Add support for NSCU board
495 * Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
497 * Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
498 mirror bit flash on TQM8xxM modules
500 * Patch by Kenneth Johansson, 30 Jun 2003:
501 get rid of MK_CMD_ENTRY macro; update doc/README.command
503 * Patch by Seb James, 30 Jun 2003:
504 Improve documentation of I2C configuration in README
506 * Fix problems with previous log buffer "fixes"
508 * Fix minor help text issues
510 * "log append" did not append a newline
512 ======================================================================
513 Changes for U-Boot 0.4.1:
514 ======================================================================
516 * Fix some missing commands, cleanup header files
517 (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
519 * Rewrite command lookup and help command (fix problems with bubble
520 sort when sorting command name list). Minor cleanup here and there.
522 * Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
523 - Allow to call sysmon function interactively
524 - PIC on LWMON board needs delay after power-on
525 - Add missing RSR definitions for MPC8xx
526 - Improve log buffer handling: guarantee clean reset after power-on
527 - Add support for EXBITGEN board (aka "genie")
528 - Add support for SL8245 board
531 - remove trailing white space, trailing empty lines, C++ comments, etc.
532 - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
534 * Patches by Kenneth Johansson, 25 Jun 2003:
535 - major rework of command structure
536 (work done mostly by Michal Cendrowski and Joakim Kristiansen)
538 ======================================================================
539 Changes for U-Boot 0.4.0:
540 ======================================================================
542 * Patches by Robert Schwebel, 26 Jun 2003:
543 - csb226 configuration updated
544 - credits for logodl port updated
545 - innokom configuration updated
546 - logodl tree update, still with coding style inconsistencies
547 - added OCM for ppc405 warning to README
549 * Patch by Pantelis Antoniou, 25 Jun 2003:
550 update NetVia with V2 board support
552 * Header file cleanup for ARM
554 * Patch by Murray Jensen, 24 Jun 2003:
555 - make sure to use only U-boot provided header files
556 - fix problems with ".rodata.str1.4" section as used by GCC-3.x
558 * Patch by Stefan Roese, 24 Jun 2003:
559 - Update esd ASH405 board files.
560 - Update esd DASA_SIM config file.
561 - Add ping command to some esd boards.
563 * Patch by Yuli Barcohen, 23 Jun 2003:
564 Update for MPC8260ADS board
566 * Patch by Murray Jensen, 23 Jun 2003:
567 - cleanup of GCC 3.x compiler warnings
569 * Patch by Rune Torgersen, 4 Jun 2003:
570 add large memory support for MPC8266ADS board
572 * Patch by Richard Woodruff, 19 June 03:
573 - Enabled standard u-boot device abstraction for ARM
574 - Enabled console device for ARM
575 - Initilized bi_baudrate for ARM
577 * Patch by Bill Hargen, 23 Apr 2003:
578 fix byte order for 824x I2C addresses (write op)
580 * Patch by Murray Jensen, 20 Jun 2003:
582 - cleanup (especially for gcc-3.x compilers)
584 * Patch by Tom Guilliams, 20 Jun 2003:
585 added CONFIG_750FX support for IBM 750FX processors
587 * Patch by Devin Crumb, 02 Apr 2003:
588 Fix clock divider rounding problem in drivers/serial.c
590 * Patch by Richard Woodruff, 19 June 03:
591 - Fixed smc91c111 driver to sync with the u-boot environment
592 (driver/smc91c111.c).
593 - Added eth_init error return check in NetLoop (net/net.c).
595 * Patch by Ken Chou, 19 June 2003:
596 Added support for A3000 SBC board (Artis Microsystems Inc.)
598 * Patches by Murray Jensen, 17 Jun 2003:
599 - Hymod board database mods: add "who" field and new xilinx chip types
600 - provide new "init_cmd_timeout()" function so code external to
601 "common/main.c" can use the "reset_cmd_timeout()" function before
602 entering the main loop
603 - add DTT support for adm1021 (new file dtt/adm1021.c; config
604 slightly different. see include/configs/hymod.h for an example
605 (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
606 CFG_DTT_ADM1021 defined)
607 - add new "eeprom_probe()" function which has similar args and
608 behaves in a similar way to "eeprom_read()" etc.
609 - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
610 function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
611 - gdbtools copyright update
612 - ensure that set_msr() executes the "sync" and "isync" instructions
613 after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
614 - 8260 I/O ports fix: Open Drain should be set last when configuring
615 - add SIU IRQ defines for 8260
616 - allow LDSCRIPT override and OBJCFLAGS initialization: change to
617 config.mk to allow board configurations to override the GNU
618 linker script, selected via the LDSCRIPT, make variable, and to
619 give an initial value to the OBJCFLAGS make variable
620 - 8260 i2c enhancement:
621 o correctly extends the timeout depending on the size of all
622 queued messages for both transmit and receive
623 o will not continue with receive if transmit times out
624 o ensures that the error callback is done for all queued tx
626 o correctly detects both tx and rx timeouts, only delivers one to
627 the callback, and does not overwrite an earlier error
628 o logic in i2c_probe now correct
629 - add "vprintf()" function so that "panic()" function can be
631 - many Hymod board changes
633 * Patches by Robert Schwebel, 14 Jun 2003:
634 - add support for Logotronic DL datalogger board
635 - cleanup serial line after kermit binary download
636 - add debugX macro (debug level support)
637 - update mach-types.h to latest arm.linux.org.uk master list.
639 * Patches by David Müller, 12 Jun 2003:
640 - rewrite of the S3C24X0 register definitions stuff
641 - "driver" for the built-in S3C24X0 RTC
643 * Patches by Yuli Barcohen, 12 Jun 2003:
644 - Add MII support and Ethernet PHY initialization for MPC8260ADS board
645 - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
646 configuration word supplied by FPGA on some MPC8260ADS boards
648 * Patch by Pantelis Antoniou, 10 Jun 2003:
649 Unify status LED interface
651 * Add support for DS12887 RTC; add RTC support for ATC board
653 * Patch by Nicolas Lacressonniere, 11 Jun 2003:
654 Modifications for Atmel AT91RM9200DK ARM920T based development kit
655 - Add Atmel DataFlash support for reading and writing.
656 - Add possibility to boot a Linux from DataFlash with BOOTM command.
657 - Add Flash detection on Atmel AT91RM9200DK
658 (between Atmel AT49BV1614 and AT49BV1614A flashes)
659 - Replace old Ethernet PHY layer functions
660 - Change link address
662 * Patch by Frank Smith, 9 Jun 2003:
663 use CRIT_EXCEPTION for machine check on 4xx
665 * Patch by Detlev Zundel, 13 Jun 2003:
666 added implementation of the "carinfo" command in cmd_immap.c
668 * Fix CONFIG_NET_MULTI support in include/net.h
670 * Patches by Kyle Harris, 13 Mar 2003:
671 - Add FAT partition support
672 - Add command support for FAT
673 - Add command support for MMC
675 - Add Intel PXA support for video
676 - Add Intel PXA support for MMC
678 - Enable MMC and FAT for lubbock board
679 - Other misc changes for lubbock board
681 * Patch by Robert Schwebel, April 02, 2003:
682 fix for SMSC91111 driver
684 * Patch by Vladimir Gurevich, 04 Jun 2003:
685 make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
687 * Patch by Stefan Roese, 05 Jun 2003:
688 - PPC4xx: Fix bug for initial stack in data cache as pointed out by
689 Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
690 data cache can be used even if the chip select is in use.
691 - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
692 (see README for further description).
693 - Changed config files of CONFIG_EEPRO100 boards to use the
694 CFG_RX_ETH_BUFFER define.
696 * Add support for RMU board
698 * Add support for TQM862L at 100/50 MHz
700 * Patch by Pantelis Antoniou, 02 Jun 2003:
701 major reconstruction of networking code;
702 add "ping" support (outgoing only!)
704 * Patch by Denis Peter, 04 June 2003:
705 add support for the MIP405T board
707 * Patches by Udi Finkelstein, 2 June 2003:
708 - Added support for custom keyboards, initialized by defining a
709 board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
710 - Added support for the RBC823 board.
711 - cpu/mpc8xx/lcd.c now automatically calculates the
712 Horizontal Pixel Count field.
714 * Fix alignment problem in BOOTP (dhcp_leasetime option)
715 [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
717 * Patch by Mark Rakes, 14 May 2003:
718 add support for Intel e1000 gig cards.
720 * Patch by Nye Liu, 3 Jun 2003:
721 fix critical typo in MAMR definition (include/mpc8xx.h)
723 * Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
725 * Patch by Klaus Heydeck, 2 Jun 2003
726 Minor changes for KUP4K configuration
728 * Patch by Marc Singer, 29 May 2003:
729 Fixed rarp boot method for IA32 and other little-endian CPUs.
731 * Patch by Marc Singer, 28 May 2003:
732 Added port I/O commands.
734 * Patch by Matthew McClintock, 28 May 2003
735 - cpu/mpc824x/start.S: fix relocation code when booting from RAM
736 - minor patches for utx8245
738 * Patch by Daniel Engström, 28 May 2003:
741 * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
742 add nand flash support to SXNI855T configuration
743 fix/extend nand flash support:
744 - fix 'nand erase' command so does not erase bad blocks
745 - fix 'nand write' command so does not write to bad blocks
746 - fix nand_probe() so handles no flash detected properly
747 - add doc/README.nand
748 - add .jffs2 and .oob options to nand read/write
749 - add 'nand bad' command to list bad blocks
750 - add 'clean' option to 'nand erase' to write JFFS2 clean markers
751 - make NAND read/write faster
753 * Patch by Rune Torgersen, 23 May 2003:
754 Update for MPC8266ADS board
756 * Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
757 instead CFG_MONITOR_LEN is now only used to determine _at_compile_
758 _time_ (!) if the environment is embedded within the U-Boot image,
759 or in a separate flash sector.
761 * Cleanup CFG_DER #defines in config files (wd maintained only)
763 * Fix data abort exception handling for arm920t CPU
765 * Fix alignment problems with flash driver for TRAB board
767 * Patch by Donald White, 21 May 2003:
768 fix calculation of base address in pci_hose_config_device()
770 * Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
771 execute "cmd2", even if "cmd1" fails. Note that this is different
772 to "run var1 var2" where the contents of "var2" will NOT be
773 executed when a command in "var1" fails.
775 * Add zero-copy ramdisk support (requires corresponding kernel support!)
777 * Patch by Kyle Harris, 20 May 2003:
778 In preparation for an ixp port, rename cpu/xscale and arch-xscale
779 into cpu/pxa and arch-pxa.
781 * Patch by Stefan Roese, 23 May 2003:
782 - IBM PPC405EP port added.
783 - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
784 UART0) is used as default U-Boot console. PPC4xx only!
785 - esd ASH405 board added (PPC405EP based).
786 - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
787 - esd CPCI405AB board added.
788 - esd PMC405 board added.
789 - Update of some esd boards.
791 * Patch by Denis Peter, 19 Mai 2003:
792 add support for the MIP405-3 board
794 * Patch by Dave Ellis, 22 May 2003:
795 Fix problem with only partially cleared .bss segment
797 * Patch by Rune Torgersen, 12 May 2003:
798 get PCI to work on a MPC8266ADS board; incorporate change to
799 cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
801 * Patch by Nye Liu, 1 May 2003:
802 minor patches for the FADS8xx
804 * Patch by Thomas Schäfer, 28 Apr 2003:
805 Fix SPD handling for 256 ECC DIMM on Walnut
807 * Add support for arbitrary bitmaps for TRAB's VFD command;
808 allow to pass boot bitmap addresses in environment variables;
809 allow for zero boot delay
811 * Patch by Christian Geißinger, 19 May 2002:
812 On TRAB: wait until the dummy byte has been completely sent
814 * Patch by David Updegraff, 22 Apr 2003:
815 update for CrayL1 board
817 * Patch by Pantelis Antoniou, 21 Apr 2003:
818 add boot support for ARTOS (a proprietary OS)
820 * Patch by Steven Scholz, 11 Apr 2003:
821 Add support for RTC DS1338
823 * Patch by Rod Boyce, 24 Jan 2003:
824 Fix counting of extended partitions in diskboot command
826 * Patch by Christophe Lindheimer, 20 May 2003:
827 allow the use of CFG_LOADS when CFG_NO_FLASH is set
829 * Fix SDRAM timing on Purple board
831 * Add support for CompactFlash on ATC board
832 (includes support for Intel 82365 and compatible PC Card controllers,
833 and Yenta-compatible PCI-to-CardBus controllers)
835 * Patch by Mathijs Haarman, 08 May 2003:
836 Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
838 * Fix problem with usage of "true" (undefined in current versions of bfd.h)
840 * Add support for Promess ATC board
842 * Patch by Keith Outwater, 28 Apr 2003:
843 - Miscellaneous corrections and additions to GEN860T board specific code.
844 - Added GEN860_SC variant to GEN860T.
845 - Miscellaneous corrections to GEN860T documentation.
846 - Correct duplicate entry in U-Boot CREDITS file.
847 - Add GEN860T_SC entry in MAINTAINERS file.
848 - Update CREDITS file with GEN860T_SC info.
850 * Update Smiths Aerospace addresses in MAINTAINERS file
852 * Fix error handling in hush's version of "run" command
855 - Splashscreen support
858 - temperature dependend enabling of LCD
860 * Allow booting from old "PPCBoot" disk partitions
862 * Add support for TQM8255 Board / MPC8255 CPU
864 ======================================================================
865 Changes for U-Boot 0.3.1:
866 ======================================================================
868 * Make sure Block Lock Bits get cleared in R360MPI flash driver
870 * MPC823 LCD driver: Fill color map backwards, to allow for steady
871 display when Linux takes over
873 * Patch by Erwin Rol, 27 Feb 2003:
874 Add support for RTEMS (this time for real).
876 * Add support for "bmp info" and "bmp display" commands to load
877 bitmap images; this can be used (for example in a "preboot"
878 command) to display a splash screen very quickly after poweron.
880 * Add support for 133 MHz clock on INCA-IP board
882 * Patch by Lutz Dennig, 10 Apr 2003:
883 Update for R360MPI board
885 * Add new meaning to "autostart" environment variable:
886 If set to "no", a standalone image passed to the
887 "bootm" command will be copied to the load address
888 (and eventually uncompressed), but NOT be started.
889 This can be used to load and uncompress arbitrary
892 * Patch by Stefan Roese, 10 Apr 2003:
893 Changed DHCP client to use IP address from server option field #54
894 from the OFFER packet in the server option field #54 in the REQUEST
895 packet. This fixes a problem using a Windows 2000 DHCP server,
896 where the DHCP-server is not the TFTP-server.
898 * Set max brightness for MN11236 displays on TRAB board
900 * Add support for TQM862L modules
902 ======================================================================
903 Changes for U-Boot 0.3.0:
904 ======================================================================
906 * Patch by Arun Dharankar, 4 Apr 2003:
907 Add IDMA example code (tested on 8260 only)
909 * Add support for Purple Board (MIPS64 5Kc)
911 * Add support for MIPS64 5Kc CPUs
913 * Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
915 * Patch by Denis Peter, 04 Apr 2003:
916 - update MIP405-4 board
918 * Patch by Stefan Roese, 4 Apr 2003:
919 - U-Boot version environment variable "ver" added
920 (CONFIG_VERSION_VARIABLE).
921 - Changed PPC405GPr version from A to B.
922 - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
924 * Patches by Denis Peter, 03 April 2003:
925 - fix PCI IRQs on MPL boards
926 - fix two more un-relocated pointer problems
928 * Fix behaviour of "run" command:
929 - print error message iv variable does not exist
930 - terminate processing of arguments in case of error
932 * Patches by Peter Figuli, 10 Mar 2003
933 - Add support for BTUART on PXA platform
934 - Add support for WEP EP250 (PXA) board
936 * Fix flash problems on INCA-IP; add tool to allow bruning images to
937 flash using a BDI2000
939 * Implement fix for I2C Edge Conditions problem for all boards that
940 use the bit-banging driver (common/soft_i2c.c)
942 * Patch by Martin Winistoerfer, 23 Mar 2003
943 - Add port to MPC555/556 microcontrollers
944 - Add support for cmi customer board with
945 Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
947 * Patch by Rick Bronson, 28 Mar 2003:
948 - fix common/cmd_nand.c
950 * Patch by Arun Dharankar, 24 Mar 2003:
951 - add threads / scheduler example code
953 * Add patches by Robert Schwebel, 31 Mar 2003:
954 - add ctrl-c support for kermit download
955 - align bdinfo output on ARM
956 - csb226 board: bring in sync with innokom/memsetup.S
957 - csb226 board: fix MDREFR handling
958 - misc doc fixes / extensions
959 - innokom board: cleanup, MDREFR fix in memsetup.S, config update
960 - add BOOT_PROGRESS to armlinux.c
962 * Add CPU ID, version, and clock speed for INCA-IP
964 * Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
965 - fix SRAM and SDRAM memory sizing
966 - add status LED support
967 - add MAC address for second (SCC1) ethernet port
969 * Update default environment for TQM8260 board
971 * Patch by Rick Bronson, 16 Mar 2003:
972 - Add NAND flash support for reading, writing, and erasing NAND
973 flash (certain forms of which are called SmartMedia).
974 - Add support for Atmel AT91RM9200DK ARM920T based development kit.
976 * Patches by Robert Schwebel, 19 Mar 2003:
977 - use arm-linux-gcc as default compiler for ARM
979 - fix missing baudrate setting
980 - added $loadaddr / CFG_LOAD_ADDR support to loadb
981 - moved "ignoring trailing characters" _before_ u-boot wants to
982 print out diagnostics messages; removes bogus characters at the
985 * Patch by John Zhan, 18 Mar 2003:
986 Add support for SinoVee Microsystems SC8xx boards
988 * Patch by Rolf Offermanns, 21 Mar 2003:
989 ported the dnp1110 related changes from the current armboot cvs to
990 current u-boot cvs. smc91111 does not work. problem marked in
991 smc91111.c, grep for "FIXME".
993 * Patch by Brian Auld, 25 Mar 2003:
994 Add support for STM flash chips on ebony board
996 * Add PCI support for MPC8250 Boards (PM825 module)
998 * Patch by Stefan Roese, 25 Mar 2003:
1001 * Patch by Stefan Roese, 20 Mar 2003:
1002 - CPCI4052 update (support for revision 3).
1003 - Set edge conditioning circuitry on PPC405GPr for compatibility
1004 to existing PPC405GP designs.
1005 - Clip udiv to 5 bits on PPC405 (serial.c).
1007 * Extend INCAIP board support:
1008 - add automatic RAM size detection
1009 - add "bdinfo" command
1010 - pass flash address and size to Linux kernel
1011 - switch to 150 MHz clock
1013 * Avoid flicker on the TRAB's VFD by synchronizing the enable with
1014 the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
1015 boards, version 153 for Rev. 200 boards).
1017 * Patch by Vladimir Gurevich, 12 Mar 2003:
1018 Fix relocation problem of statically initialized string pointers
1021 * Patch by Kai-Uwe Blöm, 12 Mar 2003:
1022 Cleanup & bug fixes for JFFS2 code:
1023 - the memory mangement was broken. It caused havoc on malloc by
1024 writing beyond the block boundaries.
1025 - the length calculation for files was wrong, sometimes resulting
1026 in short file reads.
1027 - data copying now optionally takes fragment version numbers into
1028 account, to avoid copying from older data.
1029 See doc/README.JFFS2 for details.
1031 * Patch by Josef Wagner, 12 Mar 2003:
1032 - 16/32 MB and 50/80 MHz support with auto-detection for IP860
1033 - ETH05 and BEDBUG support for CU824
1034 - added support for MicroSys CPC45
1035 - new BOOTROM/FLASH0 and DOC base for PM826
1037 * Patch by Robert Schwebel, 12 Mar 2003:
1038 Fix the chpart command on innokom board
1041 mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
1042 s/PPCBoot/U-Boot/ in some files
1043 s/pImage/uImage/ in some files
1045 * Patch by Detlev Zundel, 15 Jan 2003:
1046 Fix '' command line quoting
1048 * Patch by The LEOX team, 19 Jan 2003:
1049 - add support for the ELPT860 board
1050 - add support for Dallas ds164x RTC
1052 * Patches by David Müller, 31 Jan 2003:
1053 - minimal setup for CardBus bridges
1054 - add EEPROM read/write support in the CS8900 driver
1055 - add support for the builtin I2C controller in the Samsung s3c24x0 chips
1056 - add support for MPL's VCMA9 (Samsung s3c2410 based) board
1058 * Patch by Steven Scholz, 04 Feb 2003:
1059 add support for RTC DS1307
1061 * Patch by Reinhard Meyer, 5 Feb 2003:
1062 fix PLPRCR/SCCR init sequence on 8xx to allow for
1063 changes of EBDF by software
1065 * Patch by Vladimir Gurevich, 07 Feb 2003:
1066 "API-compatibility patch" for 4xx I2C driver
1068 * TRAB fixes / extensions:
1069 - Restore VFD brightness as saved in environment
1070 - add support for Fujitsu flashes
1071 - make sure both buzzers are turned off (drive low level)
1073 * Patches by Robert Schwebel, 06 Mar 2003:
1074 - fix bug in BOOTP code (must use NetCopyIP)
1075 - update of CSB226 port
1076 - clear BSS segment on XScale
1077 - added support for i2c_init_board() function
1078 - update to the Innokom plattform
1080 * Extend support for redundand environments for configurations where
1081 environment size < sector size
1083 * Patch by Rune Torgersen, 13 Feb 2003:
1084 Add support for Motorola MPC8266ADS board
1086 * Patch by Kyle Harris, 19 Feb 2003:
1087 patches for the Intel lubbock board:
1088 memsetup.S - general cleanup (based on Robert's csb226 code)
1089 flash.c - overhaul, actually works now
1090 lubbock.c - fix init funcs to return proper value
1092 * Patch by Kenneth Johansson, 26 Feb 2003:
1093 - Fixed off by one in RFTA calculation.
1094 - No need to abort when LDF is lower than we can program it's only
1095 minimum timing so clamp it to what we can do.
1096 - Takes function pointer to function for reading the spd_nvram. Usefull
1097 for faking data or hardcode a module without the nvram.
1098 - fix other user for above change
1099 - fix some comments.
1101 * Patches by Brian Waite, 26 Feb 2003:
1102 - fix port for evb64260 board
1103 - fix PCI for evb64260 board
1106 * Patch by Reinhard Meyer, 1 Mar 2003:
1107 Add support for EMK TOP860 Module
1109 * Patch by Yuli Barcohen, 02 Mar 2003:
1110 Add SPD EEPROM support for MPC8260ADS board
1112 * Patch by Robert Schwebel, 21 Jan 2003:
1113 - Add support for Innokom board
1114 - Don't complain if "install" fails
1115 - README cleanup (remove duplicated lines)
1116 - Update PXA header files
1118 * Add documentation for existing POST code (doc/README.POST)
1120 * Patch by Laudney Ren, 15 Jan 2003:
1121 Fix handling of redundand environment in "tools/envcrc.c"
1123 * Patch by Detlev Zundel, 28 Feb 2003:
1124 Add bedbug support for 824x systems
1126 * Add support for 16 MB flash configuration of TRAB board
1128 * Patch by Erwin Rol, 27 Feb 2003:
1129 Add support for RTEMS
1131 * Add image information to README
1133 * Patch by Stefan Roese, 18 Feb 2003:
1134 CPCIISER4 configuration updated.
1136 * Patch by Stefan Roese, 17 Feb 2003:
1137 Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
1139 * Patch by Stefan Roese, 13 Feb 2003:
1140 Add "pcidelay" environment variable (in ms, enabled via
1141 CONFIG_PCI_BOOTDELAY).
1142 PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
1143 RST# to respond to configuration cycles (33MHz -> 1s).
1145 * Fix dual PCMCIA slot support (when running with just one
1148 * Add VFD type detection to trab board
1150 * extend drivers/cs8900.c driver to synchronize ethaddr environment
1151 variable with value in the EEPROM
1153 * Patch by Stefan Roese, 10 Feb 2003:
1154 Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
1156 * Add support for MIPS32 4Kc CPUs
1158 * Add support for INCA-IP Board
1160 ======================================================================
1161 Changes for U-Boot 0.2.2:
1162 ======================================================================
1164 * Add dual ethernet support on PM826
1166 * Add support for LXT971 PHY on PM826
1168 * Patch by Tord Andersson, 16 Jan 2003:
1169 Fix flash sector count for TQM8xxL
1171 * Fix I2C EEPROM problem on ICU862 board (would only write the first
1172 16 bytes out of each 32 byte block)
1174 ======================================================================
1175 Changes for U-Boot 0.2.1:
1176 ======================================================================
1178 * Add support for V37 board
1179 (patch by Jón Benediktsson, 11 Dec 2002)
1181 * Update baudrate in bd_info when it gets changed
1183 * Add watchdog trigger points while waiting for serial port
1184 (so far only 8xx -- needed on LWMON with 100ms watchdog)
1186 * Improve command line tool to access the U-Boot's environment
1187 (figuration of the utility, using a config file)
1189 * Add single quote support for (old) command line parser
1191 * Switch LWMON board default config from FRAM to EEPROM;
1192 in POST, EEPROM shows up on 8 addresses
1194 ======================================================================
1195 Changes for U-Boot 0.2.0:
1196 ======================================================================
1198 * Use 1-byte-read instead of -write for iprobe() function
1199 Add i2c commands to PM826 config
1201 * extend I2C POST code: check for list on known addresses
1203 * Improve log buffer code; use "loglevel" to decide which messages
1204 to log on the console, too (like in Linux); get rid of "logstart"
1206 * Add command line tool to access the U-Boot's environment
1207 (board-specific for TRAB now, to be fixed later)
1209 * Patch by Hans-Joerg Frieden, 06 Dec 2002
1210 Fix misc problems with AmigaOne support
1212 * Patch by Chris Hallinan, 3 Dec 2002:
1213 minor cleanup to the MPC8245 EPIC driver
1215 * Patch by Pierre Aubert , 28 Nov 2002
1216 Add support for external (SIU) interrupts on MPC8xx
1218 * Patch by Pierre Aubert , 28 Nov 2002
1219 Fix nested syscalls bug in standalone applications
1221 * Patch by David Müller, 27 Nov 2002:
1222 fix output of "pciinfo" command for CardBus bridge devices.
1224 * Fix bug in TQM8260 board detection - boards got stuck when board ID
1227 * Add LED indication for IDE activity on KUP4K board
1229 * Fix startup problems with VFD display on TRAB
1231 * Patch by Pierre Aubert, 20 Nov 2002
1232 Add driver for Epson SED13806 graphic controller.
1233 Add support for BMP logos in cfb_console driver.
1235 * Added support for both PCMCIA slots (at the same time!) on MPC8xx
1237 * Patch by Rod Boyce, 21 Nov 2002:
1238 fix PCMCIA on MBX8xx board
1240 * Patch by Pierre Aubert , 21 Nov 2002
1241 Add CFG_CPM_POST_WORD_ADDR to make the offset of the
1242 bootmode word in DPRAM configurable
1244 * Patch by Daniel Engström, 18 Nov 2002:
1245 Fixes for x86 port (mostly strings issues)
1247 * Patch by Ken Chou, 18 Nov 2002:
1248 Fix for natsemi NIC cards (DP83815)
1250 * Patch by Pierre Aubert, 19 Nov 2002:
1251 fix a bug for the MII configuration, and some warnings
1253 * Patch by Thomas Frieden, 13 Nov 2002:
1254 Add code for AmigaOne board
1255 (preliminary merge to U-Boot, still WIP)
1257 * Patch by Jon Diekema, 12 Nov 2002:
1258 - Adding URL for IEEE OUI lookup
1259 - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
1261 - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
1262 root-on-nfs macros are designed to switch how the default boot
1263 method gets defined.
1265 * Patch by Daniel Engström, 13 Nov 2002:
1266 Add support for i386 architecture and AMD SC520 board
1268 * Patch by Pierre Aubert, 12 Nov 2002:
1269 Add support for DOS filesystem and booting from DOS floppy disk
1271 * Patch by Jim Sandoz, 07 Nov 2002:
1272 Increase number of network RX buffers (PKTBUFSRX in
1273 "include/net.h") for EEPRO100 based boards (especially SP8240)
1274 which showed "Receiver is not ready" errors when U-Boot was
1275 processing the receive buffers slower than the network controller
1278 * Patch by Andreas Oberritter, 09 Nov 2002:
1279 Change behaviour of NetLoop(): return -1 for errors, filesize
1280 otherwise; return code 0 is valid an means no file loaded - in this
1281 case the environment still gets updated!
1283 * Patches by Jon Diekema, 9 Nov 2002:
1284 - improve ADC/DAC clocking on the SACSng board to align
1285 the failing edges of LRCLK and SCLK
1286 - sbc8260 configuration tweaks
1287 - add status LED support for 82xx systems
1288 - wire sspi/sspo commands into command handler; improved error
1290 - add timestamp support and alternate memory test to the
1291 SACSng configuration
1293 * Patch by Vince Husovsky, 7 Nov 2002:
1294 Add "-n" to linker options to get rid of "Not enough room for
1295 program headers" problem
1297 * Patch by David Müller, 05 Nov 2002
1298 Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
1299 so we can use an already existing name
1301 * Patch by Pierre Aubert, 05 Nov 2002
1302 Hardware relatied improvments in FDC boot code
1304 * Patch by Holger Schurig, 5 Nov 2002:
1305 Make the PXA really change it's frequency
1307 * Patch by Pierre Aubert, 05 Nov 2002
1308 Add support for slave serial Spartan 2 FPGAs
1310 * Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
1313 * Add support for log buffer which can be passed to Linux kernel's
1314 syslog mechanism; used especially for POST results.
1316 * Patch by Klaus Heydeck, 31 Oct 2002:
1317 Add initial support for kup4k board
1319 * Patch by Robert Schwebel, 04 Nov 2002:
1320 - use watchdog to reset PXA250 systems
1321 - added progress callbacks to (some of the) ARM code
1322 - update for Cogent CSB226 board
1324 * Add support for FPS860 board
1326 * Patch by Guillaume Alexandre,, 04 Nov 2002:
1327 Improve PCI access on 32-bits Compact PCI bus
1329 * Fix mdelay() on TRAB - this was still the debugging version with
1330 seconds instead of ms.
1332 * Patch by Robert Schwebel, 1 Nov 2002:
1333 XScale related cleanup (affects all ARM boards)
1335 * Cleanup of names and README.
1337 ======================================================================
1338 Notes for U-Boot 0.1.0:
1339 ======================================================================
1341 This is the initial version of "Das U-Boot", the Universal Boot Loader.
1343 It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
1344 For information about the history of the project please see the
1345 PPCBoot project page at http://sourceforge.net/projects/ppcboot
1347 ======================================================================