arch/arm/cpu/arm926ejs/at91/clock.c

   1 /*
   2  * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
   3  *
   4  * Copyright (C) 2005 David Brownell
   5  * Copyright (C) 2005 Ivan Kokshaysky
   6  * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  */
  13
  14 #include <common.h>
  15 #include <asm/io.h>
  16 #include <asm/arch/hardware.h>
  17 #include <asm/arch/at91_pmc.h>
  18 #include <asm/arch/clk.h>
  19
  20 #if !defined(CONFIG_AT91FAMILY)
  21 # error You need to define CONFIG_AT91FAMILY in your board config!
  22 #endif
  23
  24 DECLARE_GLOBAL_DATA_PTR;
  25
  26 static unsigned long at91_css_to_rate(unsigned long css)
  27 {
  28         switch (css) {
  29         case AT91_PMC_MCKR_CSS_SLOW:
  30                 return CONFIG_SYS_AT91_SLOW_CLOCK;
  31         case AT91_PMC_MCKR_CSS_MAIN:
  32                 return gd->arch.main_clk_rate_hz;
  33         case AT91_PMC_MCKR_CSS_PLLA:
  34                 return gd->arch.plla_rate_hz;
  35         case AT91_PMC_MCKR_CSS_PLLB:
  36                 return gd->arch.pllb_rate_hz;
  37         }
  38
  39         return 0;
  40 }
  41
  42 #ifdef CONFIG_USB_ATMEL
  43 static unsigned at91_pll_calc(unsigned main_freq, unsigned out_freq)
  44 {
  45         unsigned i, div = 0, mul = 0, diff = 1 << 30;
  46         unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
  47
  48         /* PLL output max 240 MHz (or 180 MHz per errata) */
  49         if (out_freq > 240000000)
  50                 goto fail;
  51
  52         for (i = 1; i < 256; i++) {
  53                 int diff1;
  54                 unsigned input, mul1;
  55
  56                 /*
  57                  * PLL input between 1MHz and 32MHz per spec, but lower
  58                  * frequences seem necessary in some cases so allow 100K.
  59                  * Warning: some newer products need 2MHz min.
  60                  */
  61                 input = main_freq / i;
  62 #if defined(CONFIG_AT91SAM9G20)
  63                 if (input < 2000000)
  64                         continue;
  65 #endif
  66                 if (input < 100000)
  67                         continue;
  68                 if (input > 32000000)
  69                         continue;
  70
  71                 mul1 = out_freq / input;
  72 #if defined(CONFIG_AT91SAM9G20)
  73                 if (mul > 63)
  74                         continue;
  75 #endif
  76                 if (mul1 > 2048)
  77                         continue;
  78                 if (mul1 < 2)
  79                         goto fail;
  80
  81                 diff1 = out_freq - input * mul1;
  82                 if (diff1 < 0)
  83                         diff1 = -diff1;
  84                 if (diff > diff1) {
  85                         diff = diff1;
  86                         div = i;
  87                         mul = mul1;
  88                         if (diff == 0)
  89                                 break;
  90                 }
  91         }
  92         if (i == 256 && diff > (out_freq >> 5))
  93                 goto fail;
  94         return ret | ((mul - 1) << 16) | div;
  95 fail:
  96         return 0;
  97 }
  98 #endif
  99
 100 static u32 at91_pll_rate(u32 freq, u32 reg)
 101 {
 102         unsigned mul, div;
 103
 104         div = reg & 0xff;
 105         mul = (reg >> 16) & 0x7ff;
 106         if (div && mul) {
 107                 freq /= div;
 108                 freq *= mul + 1;
 109         } else
 110                 freq = 0;
 111
 112         return freq;
 113 }
 114
 115 int at91_clock_init(unsigned long main_clock)
 116 {
 117         unsigned freq, mckr;
 118         at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
 119 #ifndef CONFIG_SYS_AT91_MAIN_CLOCK
 120         unsigned tmp;
 121         /*
 122          * When the bootloader initialized the main oscillator correctly,
 123          * there's no problem using the cycle counter.  But if it didn't,
 124          * or when using oscillator bypass mode, we must be told the speed
 125          * of the main clock.
 126          */
 127         if (!main_clock) {
 128                 do {
 129                         tmp = readl(&pmc->mcfr);
 130                 } while (!(tmp & AT91_PMC_MCFR_MAINRDY));
 131                 tmp &= AT91_PMC_MCFR_MAINF_MASK;
 132                 main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
 133         }
 134 #endif
 135         gd->arch.main_clk_rate_hz = main_clock;
 136
 137         /* report if PLLA is more than mildly overclocked */
 138         gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
 139
 140 #ifdef CONFIG_USB_ATMEL
 141         /*
 142          * USB clock init:  choose 48 MHz PLLB value,
 143          * disable 48MHz clock during usb peripheral suspend.
 144          *
 145          * REVISIT:  assumes MCK doesn't derive from PLLB!
 146          */
 147         gd->arch.at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) |
 148                              AT91_PMC_PLLBR_USBDIV_2;
 149         gd->arch.pllb_rate_hz = at91_pll_rate(main_clock,
 150                                               gd->arch.at91_pllb_usb_init);
 151 #endif
 152
 153         /*
 154          * MCK and CPU derive from one of those primary clocks.
 155          * For now, assume this parentage won't change.
 156          */
 157         mckr = readl(&pmc->mckr);
 158 #if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
 159                 || defined(CONFIG_AT91SAM9X5)
 160         /* plla divisor by 2 */
 161         gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
 162 #endif
 163         gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
 164         freq = gd->arch.mck_rate_hz;
 165
 166         freq /= (1 << ((mckr & AT91_PMC_MCKR_PRES_MASK) >> 2)); /* prescale */
 167 #if defined(CONFIG_AT91SAM9G20)
 168         /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 169         gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ?
 170                 freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
 171         if (mckr & AT91_PMC_MCKR_MDIV_MASK)
 172                 freq /= 2;                      /* processor clock division */
 173 #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
 174                 || defined(CONFIG_AT91SAM9X5)
 175         /* mdiv <==> divisor
 176          *  0   <==>   1
 177          *  1   <==>   2
 178          *  2   <==>   4
 179          *  3   <==>   3
 180          */
 181         gd->arch.mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
 182                 (AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
 183                 ? freq / 3
 184                 : freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
 185 #else
 186         gd->arch.mck_rate_hz = freq /
 187                         (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
 188 #endif
 189         gd->arch.cpu_clk_rate_hz = freq;
 190
 191         return 0;
 192 }