Add GPL-2.0+ SPDX-License-Identifier to source files

[karo-tx-uboot.git] / arch / arm / cpu / armv7 / exynos / clock_init_exynos5.c

/*
 * Clock setup for SMDK5250 board based on EXYNOS5
 *
 * Copyright (C) 2012 Samsung Electronics
 *
 * SPDX-License-Identifier:     GPL-2.0+
 */

#include <common.h>
#include <config.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include <asm/arch/spl.h>
#include <asm/arch/dwmmc.h>

#include "clock_init.h"
#include "common_setup.h"
#include "exynos5_setup.h"

#define FSYS1_MMC0_DIV_MASK     0xff0f
#define FSYS1_MMC0_DIV_VAL      0x0701

DECLARE_GLOBAL_DATA_PTR;

struct arm_clk_ratios arm_clk_ratios[] = {
        {
                .arm_freq_mhz = 600,

                .apll_mdiv = 0xc8,
                .apll_pdiv = 0x4,
                .apll_sdiv = 0x1,

                .arm2_ratio = 0x0,
                .apll_ratio = 0x1,
                .pclk_dbg_ratio = 0x1,
                .atb_ratio = 0x2,
                .periph_ratio = 0x7,
                .acp_ratio = 0x7,
                .cpud_ratio = 0x1,
                .arm_ratio = 0x0,
        }, {
                .arm_freq_mhz = 800,

                .apll_mdiv = 0x64,
                .apll_pdiv = 0x3,
                .apll_sdiv = 0x0,

                .arm2_ratio = 0x0,
                .apll_ratio = 0x1,
                .pclk_dbg_ratio = 0x1,
                .atb_ratio = 0x3,
                .periph_ratio = 0x7,
                .acp_ratio = 0x7,
                .cpud_ratio = 0x2,
                .arm_ratio = 0x0,
        }, {
                .arm_freq_mhz = 1000,

                .apll_mdiv = 0x7d,
                .apll_pdiv = 0x3,
                .apll_sdiv = 0x0,

                .arm2_ratio = 0x0,
                .apll_ratio = 0x1,
                .pclk_dbg_ratio = 0x1,
                .atb_ratio = 0x4,
                .periph_ratio = 0x7,
                .acp_ratio = 0x7,
                .cpud_ratio = 0x2,
                .arm_ratio = 0x0,
        }, {
                .arm_freq_mhz = 1200,

                .apll_mdiv = 0x96,
                .apll_pdiv = 0x3,
                .apll_sdiv = 0x0,

                .arm2_ratio = 0x0,
                .apll_ratio = 0x3,
                .pclk_dbg_ratio = 0x1,
                .atb_ratio = 0x5,
                .periph_ratio = 0x7,
                .acp_ratio = 0x7,
                .cpud_ratio = 0x3,
                .arm_ratio = 0x0,
        }, {
                .arm_freq_mhz = 1400,

                .apll_mdiv = 0xaf,
                .apll_pdiv = 0x3,
                .apll_sdiv = 0x0,

                .arm2_ratio = 0x0,
                .apll_ratio = 0x3,
                .pclk_dbg_ratio = 0x1,
                .atb_ratio = 0x6,
                .periph_ratio = 0x7,
                .acp_ratio = 0x7,
                .cpud_ratio = 0x3,
                .arm_ratio = 0x0,
        }, {
                .arm_freq_mhz = 1700,

                .apll_mdiv = 0x1a9,
                .apll_pdiv = 0x6,
                .apll_sdiv = 0x0,

                .arm2_ratio = 0x0,
                .apll_ratio = 0x3,
                .pclk_dbg_ratio = 0x1,
                .atb_ratio = 0x6,
                .periph_ratio = 0x7,
                .acp_ratio = 0x7,
                .cpud_ratio = 0x3,
                .arm_ratio = 0x0,
        }
};
struct mem_timings mem_timings[] = {
        {
                .mem_manuf = MEM_MANUF_ELPIDA,
                .mem_type = DDR_MODE_DDR3,
                .frequency_mhz = 800,
                .mpll_mdiv = 0xc8,
                .mpll_pdiv = 0x3,
                .mpll_sdiv = 0x0,
                .cpll_mdiv = 0xde,
                .cpll_pdiv = 0x4,
                .cpll_sdiv = 0x2,
                .gpll_mdiv = 0x215,
                .gpll_pdiv = 0xc,
                .gpll_sdiv = 0x1,
                .epll_mdiv = 0x60,
                .epll_pdiv = 0x3,
                .epll_sdiv = 0x3,
                .vpll_mdiv = 0x96,
                .vpll_pdiv = 0x3,
                .vpll_sdiv = 0x2,

                .bpll_mdiv = 0x64,
                .bpll_pdiv = 0x3,
                .bpll_sdiv = 0x0,
                .pclk_cdrex_ratio = 0x5,
                .direct_cmd_msr = {
                        0x00020018, 0x00030000, 0x00010042, 0x00000d70
                },
                .timing_ref = 0x000000bb,
                .timing_row = 0x8c36650e,
                .timing_data = 0x3630580b,
                .timing_power = 0x41000a44,
                .phy0_dqs = 0x08080808,
                .phy1_dqs = 0x08080808,
                .phy0_dq = 0x08080808,
                .phy1_dq = 0x08080808,
                .phy0_tFS = 0x4,
                .phy1_tFS = 0x4,
                .phy0_pulld_dqs = 0xf,
                .phy1_pulld_dqs = 0xf,

                .lpddr3_ctrl_phy_reset = 0x1,
                .ctrl_start_point = 0x10,
                .ctrl_inc = 0x10,
                .ctrl_start = 0x1,
                .ctrl_dll_on = 0x1,
                .ctrl_ref = 0x8,

                .ctrl_force = 0x1a,
                .ctrl_rdlat = 0x0b,
                .ctrl_bstlen = 0x08,

                .fp_resync = 0x8,
                .iv_size = 0x7,
                .dfi_init_start = 1,
                .aref_en = 1,

                .rd_fetch = 0x3,

                .zq_mode_dds = 0x7,
                .zq_mode_term = 0x1,
                .zq_mode_noterm = 0,

                /*
                * Dynamic Clock: Always Running
                * Memory Burst length: 8
                * Number of chips: 1
                * Memory Bus width: 32 bit
                * Memory Type: DDR3
                * Additional Latancy for PLL: 0 Cycle
                */
                .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
                        DMC_MEMCONTROL_DPWRDN_DISABLE |
                        DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
                        DMC_MEMCONTROL_TP_DISABLE |
                        DMC_MEMCONTROL_DSREF_ENABLE |
                        DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
                        DMC_MEMCONTROL_MEM_TYPE_DDR3 |
                        DMC_MEMCONTROL_MEM_WIDTH_32BIT |
                        DMC_MEMCONTROL_NUM_CHIP_1 |
                        DMC_MEMCONTROL_BL_8 |
                        DMC_MEMCONTROL_PZQ_DISABLE |
                        DMC_MEMCONTROL_MRR_BYTE_7_0,
                .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
                        DMC_MEMCONFIGX_CHIP_COL_10 |
                        DMC_MEMCONFIGX_CHIP_ROW_15 |
                        DMC_MEMCONFIGX_CHIP_BANK_8,
                .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
                .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
                .prechconfig_tp_cnt = 0xff,
                .dpwrdn_cyc = 0xff,
                .dsref_cyc = 0xffff,
                .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
                        DMC_CONCONTROL_TIMEOUT_LEVEL0 |
                        DMC_CONCONTROL_RD_FETCH_DISABLE |
                        DMC_CONCONTROL_EMPTY_DISABLE |
                        DMC_CONCONTROL_AREF_EN_DISABLE |
                        DMC_CONCONTROL_IO_PD_CON_DISABLE,
                .dmc_channels = 2,
                .chips_per_channel = 2,
                .chips_to_configure = 1,
                .send_zq_init = 1,
                .impedance = IMP_OUTPUT_DRV_30_OHM,
                .gate_leveling_enable = 0,
        }, {
                .mem_manuf = MEM_MANUF_SAMSUNG,
                .mem_type = DDR_MODE_DDR3,
                .frequency_mhz = 800,
                .mpll_mdiv = 0xc8,
                .mpll_pdiv = 0x3,
                .mpll_sdiv = 0x0,
                .cpll_mdiv = 0xde,
                .cpll_pdiv = 0x4,
                .cpll_sdiv = 0x2,
                .gpll_mdiv = 0x215,
                .gpll_pdiv = 0xc,
                .gpll_sdiv = 0x1,
                .epll_mdiv = 0x60,
                .epll_pdiv = 0x3,
                .epll_sdiv = 0x3,
                .vpll_mdiv = 0x96,
                .vpll_pdiv = 0x3,
                .vpll_sdiv = 0x2,

                .bpll_mdiv = 0x64,
                .bpll_pdiv = 0x3,
                .bpll_sdiv = 0x0,
                .pclk_cdrex_ratio = 0x5,
                .direct_cmd_msr = {
                        0x00020018, 0x00030000, 0x00010000, 0x00000d70
                },
                .timing_ref = 0x000000bb,
                .timing_row = 0x8c36650e,
                .timing_data = 0x3630580b,
                .timing_power = 0x41000a44,
                .phy0_dqs = 0x08080808,
                .phy1_dqs = 0x08080808,
                .phy0_dq = 0x08080808,
                .phy1_dq = 0x08080808,
                .phy0_tFS = 0x8,
                .phy1_tFS = 0x8,
                .phy0_pulld_dqs = 0xf,
                .phy1_pulld_dqs = 0xf,

                .lpddr3_ctrl_phy_reset = 0x1,
                .ctrl_start_point = 0x10,
                .ctrl_inc = 0x10,
                .ctrl_start = 0x1,
                .ctrl_dll_on = 0x1,
                .ctrl_ref = 0x8,

                .ctrl_force = 0x1a,
                .ctrl_rdlat = 0x0b,
                .ctrl_bstlen = 0x08,

                .fp_resync = 0x8,
                .iv_size = 0x7,
                .dfi_init_start = 1,
                .aref_en = 1,

                .rd_fetch = 0x3,

                .zq_mode_dds = 0x5,
                .zq_mode_term = 0x1,
                .zq_mode_noterm = 1,

                /*
                * Dynamic Clock: Always Running
                * Memory Burst length: 8
                * Number of chips: 1
                * Memory Bus width: 32 bit
                * Memory Type: DDR3
                * Additional Latancy for PLL: 0 Cycle
                */
                .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE |
                        DMC_MEMCONTROL_DPWRDN_DISABLE |
                        DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE |
                        DMC_MEMCONTROL_TP_DISABLE |
                        DMC_MEMCONTROL_DSREF_ENABLE |
                        DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) |
                        DMC_MEMCONTROL_MEM_TYPE_DDR3 |
                        DMC_MEMCONTROL_MEM_WIDTH_32BIT |
                        DMC_MEMCONTROL_NUM_CHIP_1 |
                        DMC_MEMCONTROL_BL_8 |
                        DMC_MEMCONTROL_PZQ_DISABLE |
                        DMC_MEMCONTROL_MRR_BYTE_7_0,
                .memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
                        DMC_MEMCONFIGX_CHIP_COL_10 |
                        DMC_MEMCONFIGX_CHIP_ROW_15 |
                        DMC_MEMCONFIGX_CHIP_BANK_8,
                .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
                .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
                .prechconfig_tp_cnt = 0xff,
                .dpwrdn_cyc = 0xff,
                .dsref_cyc = 0xffff,
                .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE |
                        DMC_CONCONTROL_TIMEOUT_LEVEL0 |
                        DMC_CONCONTROL_RD_FETCH_DISABLE |
                        DMC_CONCONTROL_EMPTY_DISABLE |
                        DMC_CONCONTROL_AREF_EN_DISABLE |
                        DMC_CONCONTROL_IO_PD_CON_DISABLE,
                .dmc_channels = 2,
                .chips_per_channel = 2,
                .chips_to_configure = 1,
                .send_zq_init = 1,
                .impedance = IMP_OUTPUT_DRV_40_OHM,
                .gate_leveling_enable = 1,
        }
};

/**
 * Get the required memory type and speed (SPL version).
 *
 * In SPL we have no device tree, so we use the machine parameters
 *
 * @param mem_type      Returns memory type
 * @param frequency_mhz Returns memory speed in MHz
 * @param arm_freq      Returns ARM clock speed in MHz
 * @param mem_manuf     Return Memory Manufacturer name
 */
static void clock_get_mem_selection(enum ddr_mode *mem_type,
                unsigned *frequency_mhz, unsigned *arm_freq,
                enum mem_manuf *mem_manuf)
{
        struct spl_machine_param *params;

        params = spl_get_machine_params();
        *mem_type = params->mem_type;
        *frequency_mhz = params->frequency_mhz;
        *arm_freq = params->arm_freq_mhz;
        *mem_manuf = params->mem_manuf;
}

/* Get the ratios for setting ARM clock */
struct arm_clk_ratios *get_arm_ratios(void)
{
        struct arm_clk_ratios *arm_ratio;
        enum ddr_mode mem_type;
        enum mem_manuf mem_manuf;
        unsigned frequency_mhz, arm_freq;
        int i;

        clock_get_mem_selection(&mem_type, &frequency_mhz,
                                &arm_freq, &mem_manuf);

        for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
                i++, arm_ratio++) {
                if (arm_ratio->arm_freq_mhz == arm_freq)
                        return arm_ratio;
        }

        /* will hang if failed to find clock ratio */
        while (1)
                ;

        return NULL;
}

struct mem_timings *clock_get_mem_timings(void)
{
        struct mem_timings *mem;
        enum ddr_mode mem_type;
        enum mem_manuf mem_manuf;
        unsigned frequency_mhz, arm_freq;
        int i;

        clock_get_mem_selection(&mem_type, &frequency_mhz,
                                &arm_freq, &mem_manuf);
        for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
             i++, mem++) {
                if (mem->mem_type == mem_type &&
                    mem->frequency_mhz == frequency_mhz &&
                    mem->mem_manuf == mem_manuf)
                        return mem;
        }

        /* will hang if failed to find memory timings */
        while (1)
                ;

        return NULL;
}

void system_clock_init()
{
        struct exynos5_clock *clk =
                (struct exynos5_clock *)samsung_get_base_clock();
        struct mem_timings *mem;
        struct arm_clk_ratios *arm_clk_ratio;
        u32 val, tmp;

        mem = clock_get_mem_timings();
        arm_clk_ratio = get_arm_ratios();

        clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK);
        do {
                val = readl(&clk->mux_stat_cpu);
        } while ((val | MUX_APLL_SEL_MASK) != val);

        clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK);
        do {
                val = readl(&clk->mux_stat_core1);
        } while ((val | MUX_MPLL_SEL_MASK) != val);

        clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK);
        clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK);
        clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK);
        clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK);
        tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK
                | MUX_GPLL_SEL_MASK;
        do {
                val = readl(&clk->mux_stat_top2);
        } while ((val | tmp) != val);

        clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK);
        do {
                val = readl(&clk->mux_stat_cdrex);
        } while ((val | MUX_BPLL_SEL_MASK) != val);

        /* PLL locktime */
        writel(APLL_LOCK_VAL, &clk->apll_lock);

        writel(MPLL_LOCK_VAL, &clk->mpll_lock);

        writel(BPLL_LOCK_VAL, &clk->bpll_lock);

        writel(CPLL_LOCK_VAL, &clk->cpll_lock);

        writel(GPLL_LOCK_VAL, &clk->gpll_lock);

        writel(EPLL_LOCK_VAL, &clk->epll_lock);

        writel(VPLL_LOCK_VAL, &clk->vpll_lock);

        writel(CLK_REG_DISABLE, &clk->pll_div2_sel);

        writel(MUX_HPM_SEL_MASK, &clk->src_cpu);
        do {
                val = readl(&clk->mux_stat_cpu);
        } while ((val | HPM_SEL_SCLK_MPLL) != val);

        val = arm_clk_ratio->arm2_ratio << 28
                | arm_clk_ratio->apll_ratio << 24
                | arm_clk_ratio->pclk_dbg_ratio << 20
                | arm_clk_ratio->atb_ratio << 16
                | arm_clk_ratio->periph_ratio << 12
                | arm_clk_ratio->acp_ratio << 8
                | arm_clk_ratio->cpud_ratio << 4
                | arm_clk_ratio->arm_ratio;
        writel(val, &clk->div_cpu0);
        do {
                val = readl(&clk->div_stat_cpu0);
        } while (0 != val);

        writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
        do {
                val = readl(&clk->div_stat_cpu1);
        } while (0 != val);

        /* Set APLL */
        writel(APLL_CON1_VAL, &clk->apll_con1);
        val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv,
                        arm_clk_ratio->apll_sdiv);
        writel(val, &clk->apll_con0);
        while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0)
                ;

        /* Set MPLL */
        writel(MPLL_CON1_VAL, &clk->mpll_con1);
        val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv);
        writel(val, &clk->mpll_con0);
        while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0)
                ;

        /* Set BPLL */
        writel(BPLL_CON1_VAL, &clk->bpll_con1);
        val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv);
        writel(val, &clk->bpll_con0);
        while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0)
                ;

        /* Set CPLL */
        writel(CPLL_CON1_VAL, &clk->cpll_con1);
        val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv);
        writel(val, &clk->cpll_con0);
        while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0)
                ;

        /* Set GPLL */
        writel(GPLL_CON1_VAL, &clk->gpll_con1);
        val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv);
        writel(val, &clk->gpll_con0);
        while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0)
                ;

        /* Set EPLL */
        writel(EPLL_CON2_VAL, &clk->epll_con2);
        writel(EPLL_CON1_VAL, &clk->epll_con1);
        val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv);
        writel(val, &clk->epll_con0);
        while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0)
                ;

        /* Set VPLL */
        writel(VPLL_CON2_VAL, &clk->vpll_con2);
        writel(VPLL_CON1_VAL, &clk->vpll_con1);
        val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv);
        writel(val, &clk->vpll_con0);
        while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0)
                ;

        writel(CLK_SRC_CORE0_VAL, &clk->src_core0);
        writel(CLK_DIV_CORE0_VAL, &clk->div_core0);
        while (readl(&clk->div_stat_core0) != 0)
                ;

        writel(CLK_DIV_CORE1_VAL, &clk->div_core1);
        while (readl(&clk->div_stat_core1) != 0)
                ;

        writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt);
        while (readl(&clk->div_stat_sysrgt) != 0)
                ;

        writel(CLK_DIV_ACP_VAL, &clk->div_acp);
        while (readl(&clk->div_stat_acp) != 0)
                ;

        writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft);
        while (readl(&clk->div_stat_syslft) != 0)
                ;

        writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
        writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
        writel(TOP2_VAL, &clk->src_top2);
        writel(CLK_SRC_TOP3_VAL, &clk->src_top3);

        writel(CLK_DIV_TOP0_VAL, &clk->div_top0);
        while (readl(&clk->div_stat_top0))
                ;

        writel(CLK_DIV_TOP1_VAL, &clk->div_top1);
        while (readl(&clk->div_stat_top1))
                ;

        writel(CLK_SRC_LEX_VAL, &clk->src_lex);
        while (1) {
                val = readl(&clk->mux_stat_lex);
                if (val == (val | 1))
                        break;
        }

        writel(CLK_DIV_LEX_VAL, &clk->div_lex);
        while (readl(&clk->div_stat_lex))
                ;

        writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
        while (readl(&clk->div_stat_r0x))
                ;

        writel(CLK_DIV_R0X_VAL, &clk->div_r0x);
        while (readl(&clk->div_stat_r0x))
                ;

        writel(CLK_DIV_R1X_VAL, &clk->div_r1x);
        while (readl(&clk->div_stat_r1x))
                ;

        writel(CLK_REG_DISABLE, &clk->src_cdrex);

        writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex);
        while (readl(&clk->div_stat_cdrex))
                ;

        val = readl(&clk->src_cpu);
        val |= CLK_SRC_CPU_VAL;
        writel(val, &clk->src_cpu);

        val = readl(&clk->src_top2);
        val |= CLK_SRC_TOP2_VAL;
        writel(val, &clk->src_top2);

        val = readl(&clk->src_core1);
        val |= CLK_SRC_CORE1_VAL;
        writel(val, &clk->src_core1);

        writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys);
        writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0);
        while (readl(&clk->div_stat_fsys0))
                ;

        writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu);
        writel(CLK_REG_DISABLE, &clk->clkout_cmu_core);
        writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp);
        writel(CLK_REG_DISABLE, &clk->clkout_cmu_top);
        writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex);
        writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x);
        writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x);
        writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex);

        writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0);
        writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0);

        writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1);
        writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1);
        writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2);
        writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3);

        writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp);
        writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp);
        writel(CLK_DIV_ISP0_VAL, &clk->div_isp0);
        writel(CLK_DIV_ISP1_VAL, &clk->div_isp1);
        writel(CLK_DIV_ISP2_VAL, &clk->div_isp2);

        /* FIMD1 SRC CLK SELECTION */
        writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0);

        val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET
                | MMC2_RATIO_VAL << MMC2_RATIO_OFFSET
                | MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET
                | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET;
        writel(val, &clk->div_fsys2);
}

void clock_init_dp_clock(void)
{
        struct exynos5_clock *clk =
                (struct exynos5_clock *)samsung_get_base_clock();

        /* DP clock enable */
        setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);

        /* We run DP at 267 Mhz */
        setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1);
}

/*
 * Set clock divisor value for booting from EMMC.
 * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz.
 */
void emmc_boot_clk_div_set(void)
{
        struct exynos5_clock *clk =
                (struct exynos5_clock *)samsung_get_base_clock();
        unsigned int div_mmc;

        div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;
        div_mmc |= FSYS1_MMC0_DIV_VAL;
        writel(div_mmc, (unsigned int) &clk->div_fsys1);
}