]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/arm/cpu/armv7/stv0991/timer.c
stv0991: Add basic stv0991 architecture support
[karo-tx-uboot.git] / arch / arm / cpu / armv7 / stv0991 / timer.c
1 /*
2  * (C) Copyright 2014
3  * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/arch-stv0991/hardware.h>
11 #include <asm/arch-stv0991/stv0991_cgu.h>
12 #include <asm/arch-stv0991/stv0991_gpt.h>
13
14 static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
15                                 (struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
16
17 #define READ_TIMER()    (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
18 #define GPT_RESOLUTION  (CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ)
19
20 DECLARE_GLOBAL_DATA_PTR;
21
22 #define timestamp gd->arch.tbl
23 #define lastdec gd->arch.lastinc
24
25 int timer_init(void)
26 {
27         /* Timer1 clock configuration */
28         writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq);
29         writel(readl(&stv0991_cgu_regs->cgu_enable_2) |
30                         TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2);
31
32         /* Stop the timer */
33         writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
34         writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc);
35         /* Configure timer for auto-reload */
36         writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
37                         &gpt1_regs_ptr->cr1);
38
39         /* load value for free running */
40         writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
41
42         /* start timer */
43         writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN,
44                         &gpt1_regs_ptr->cr1);
45
46         /* Reset the timer */
47         lastdec = READ_TIMER();
48         timestamp = 0;
49
50         return 0;
51 }
52
53 /*
54  * timer without interrupts
55  */
56 ulong get_timer(ulong base)
57 {
58         return (get_timer_masked() / GPT_RESOLUTION) - base;
59 }
60
61 void __udelay(unsigned long usec)
62 {
63         ulong tmo;
64         ulong start = get_timer_masked();
65         ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100);
66         ulong rndoff;
67
68         rndoff = (usec % 10) ? 1 : 0;
69
70         /* tenudelcnt timer tick gives 10 microsecconds delay */
71         tmo = ((usec / 10) + rndoff) * tenudelcnt;
72
73         while ((ulong) (get_timer_masked() - start) < tmo)
74                 ;
75 }
76
77 ulong get_timer_masked(void)
78 {
79         ulong now = READ_TIMER();
80
81         if (now >= lastdec) {
82                 /* normal mode */
83                 timestamp += now - lastdec;
84         } else {
85                 /* we have an overflow ... */
86                 timestamp += now + GPT_FREE_RUNNING - lastdec;
87         }
88         lastdec = now;
89
90         return timestamp;
91 }
92
93 void udelay_masked(unsigned long usec)
94 {
95         return udelay(usec);
96 }
97
98 /*
99  * This function is derived from PowerPC code (read timebase as long long).
100  * On ARM it just returns the timer value.
101  */
102 unsigned long long get_ticks(void)
103 {
104         return get_timer(0);
105 }
106
107 /*
108  * This function is derived from PowerPC code (timebase clock frequency).
109  * On ARM it returns the number of timer ticks per second.
110  */
111 ulong get_tbclk(void)
112 {
113         return CONFIG_STV0991_HZ;
114 }