]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - arch/nds32/cpu/n1213/ag102/timer.c
NDS32: Generic Board Support and Unsupport
[karo-tx-uboot.git] / arch / nds32 / cpu / n1213 / ag102 / timer.c
1 /*
2  * (C) Copyright 2009 Faraday Technology
3  * Po-Yu Chuang <ratbert@faraday-tech.com>
4  *
5  * Copyright (C) 2011 Andes Technology Corporation
6  * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
7  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
8  *
9  * SPDX-License-Identifier:     GPL-2.0+
10  */
11
12 #include <common.h>
13 #include <asm/io.h>
14 #include <faraday/fttmr010.h>
15
16 static ulong timestamp;
17 static ulong lastdec;
18
19 int timer_init(void)
20 {
21         struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
22         unsigned int cr;
23
24         debug("%s()\n", __func__);
25
26         /* disable timers */
27         writel(0, &tmr->cr);
28
29 #ifdef CONFIG_FTTMR010_EXT_CLK
30         /* use 32768Hz oscillator for RTC, WDT, TIMER */
31         ftpmu010_32768osc_enable();
32 #endif
33
34         /* setup timer */
35         writel(TIMER_LOAD_VAL, &tmr->timer3_load);
36         writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
37         writel(0, &tmr->timer3_match1);
38         writel(0, &tmr->timer3_match2);
39
40         /* we don't want timer to issue interrupts */
41         writel(FTTMR010_TM3_MATCH1 |
42                FTTMR010_TM3_MATCH2 |
43                FTTMR010_TM3_OVERFLOW,
44                &tmr->interrupt_mask);
45
46         cr = readl(&tmr->cr);
47 #ifdef CONFIG_FTTMR010_EXT_CLK
48         cr |= FTTMR010_TM3_CLOCK;       /* use external clock */
49 #endif
50         cr |= FTTMR010_TM3_ENABLE;
51         writel(cr, &tmr->cr);
52
53         /* init the timestamp and lastdec value */
54         reset_timer_masked();
55
56         return 0;
57 }
58
59 /*
60  * timer without interrupts
61  */
62
63 /*
64  * reset time
65  */
66 void reset_timer_masked(void)
67 {
68         struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
69
70         /* capure current decrementer value time */
71 #ifdef CONFIG_FTTMR010_EXT_CLK
72         lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
73 #else
74         lastdec = readl(&tmr->timer3_counter) /
75                         (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
76 #endif
77         timestamp = 0;          /* start "advancing" time stamp from 0 */
78
79         debug("%s(): lastdec = %lx\n", __func__, lastdec);
80 }
81
82 void reset_timer(void)
83 {
84         debug("%s()\n", __func__);
85         reset_timer_masked();
86 }
87
88 /*
89  * return timer ticks
90  */
91 ulong get_timer_masked(void)
92 {
93         struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
94
95         /* current tick value */
96 #ifdef CONFIG_FTTMR010_EXT_CLK
97         ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
98 #else
99         ulong now = readl(&tmr->timer3_counter) /
100                         (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
101 #endif
102
103         debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
104
105         if (lastdec >= now) {
106                 /*
107                  * normal mode (non roll)
108                  * move stamp fordward with absoulte diff ticks
109                  */
110                 timestamp += lastdec - now;
111         } else {
112                 /*
113                  * we have overflow of the count down timer
114                  *
115                  * nts = ts + ld + (TLV - now)
116                  * ts=old stamp, ld=time that passed before passing through -1
117                  * (TLV-now) amount of time after passing though -1
118                  * nts = new "advancing time stamp"...it could also roll and
119                  * cause problems.
120                  */
121                 timestamp += lastdec + TIMER_LOAD_VAL - now;
122         }
123
124         lastdec = now;
125
126         debug("%s() returns %lx\n", __func__, timestamp);
127
128         return timestamp;
129 }
130
131 /*
132  * return difference between timer ticks and base
133  */
134 ulong get_timer(ulong base)
135 {
136         debug("%s(%lx)\n", __func__, base);
137         return get_timer_masked() - base;
138 }
139
140 void set_timer(ulong t)
141 {
142         debug("%s(%lx)\n", __func__, t);
143         timestamp = t;
144 }
145
146 /* delay x useconds AND preserve advance timestamp value */
147 void __udelay(unsigned long usec)
148 {
149         struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
150
151 #ifdef CONFIG_FTTMR010_EXT_CLK
152         long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
153 #else
154         long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
155 #endif
156         unsigned long now, last = readl(&tmr->timer3_counter);
157
158         debug("%s(%lu)\n", __func__, usec);
159         while (tmo > 0) {
160                 now = readl(&tmr->timer3_counter);
161                 if (now > last) /* count down timer overflow */
162                         tmo -= TIMER_LOAD_VAL + last - now;
163                 else
164                         tmo -= last - now;
165                 last = now;
166         }
167 }
168
169 /*
170  * This function is derived from PowerPC code (read timebase as long long).
171  * On ARM it just returns the timer value.
172  */
173 unsigned long long get_ticks(void)
174 {
175         debug("%s()\n", __func__);
176         return get_timer(0);
177 }
178
179 /*
180  * This function is derived from PowerPC code (timebase clock frequency).
181  * On ARM it returns the number of timer ticks per second.
182  */
183 ulong get_tbclk(void)
184 {
185         debug("%s()\n", __func__);
186 #ifdef CONFIG_FTTMR010_EXT_CLK
187         return CONFIG_SYS_HZ;
188 #else
189         return CONFIG_SYS_CLK_FREQ;
190 #endif
191 }