arch/powerpc/cpu/mpc85xx/fdt.c

   1 /*
   2  * Copyright 2007-2011 Freescale Semiconductor, Inc.
   3  *
   4  * (C) Copyright 2000
   5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #include <common.h>
  11 #include <libfdt.h>
  12 #include <fdt_support.h>
  13 #include <asm/processor.h>
  14 #include <linux/ctype.h>
  15 #include <asm/io.h>
  16 #include <asm/fsl_portals.h>
  17 #ifdef CONFIG_FSL_ESDHC
  18 #include <fsl_esdhc.h>
  19 #endif
  20 #include "../../../../drivers/qe/qe.h"          /* For struct qe_firmware */
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 extern void ft_qe_setup(void *blob);
  25 extern void ft_fixup_num_cores(void *blob);
  26 extern void ft_srio_setup(void *blob);
  27
  28 #ifdef CONFIG_MP
  29 #include "mp.h"
  30
  31 void ft_fixup_cpu(void *blob, u64 memory_limit)
  32 {
  33         int off;
  34         phys_addr_t spin_tbl_addr = get_spin_phys_addr();
  35         u32 bootpg = determine_mp_bootpg(NULL);
  36         u32 id = get_my_id();
  37         const char *enable_method;
  38
  39         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
  40         while (off != -FDT_ERR_NOTFOUND) {
  41                 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
  42
  43                 if (reg) {
  44                         u32 phys_cpu_id = thread_to_core(*reg);
  45                         u64 val = phys_cpu_id * SIZE_BOOT_ENTRY + spin_tbl_addr;
  46                         val = cpu_to_fdt64(val);
  47                         if (*reg == id) {
  48                                 fdt_setprop_string(blob, off, "status",
  49                                                                 "okay");
  50                         } else {
  51                                 fdt_setprop_string(blob, off, "status",
  52                                                                 "disabled");
  53                         }
  54
  55                         if (hold_cores_in_reset(0)) {
  56 #ifdef CONFIG_FSL_CORENET
  57                                 /* Cores held in reset, use BRR to release */
  58                                 enable_method = "fsl,brr-holdoff";
  59 #else
  60                                 /* Cores held in reset, use EEBPCR to release */
  61                                 enable_method = "fsl,eebpcr-holdoff";
  62 #endif
  63                         } else {
  64                                 /* Cores out of reset and in a spin-loop */
  65                                 enable_method = "spin-table";
  66
  67                                 fdt_setprop(blob, off, "cpu-release-addr",
  68                                                 &val, sizeof(val));
  69                         }
  70
  71                         fdt_setprop_string(blob, off, "enable-method",
  72                                                         enable_method);
  73                 } else {
  74                         printf ("cpu NULL\n");
  75                 }
  76                 off = fdt_node_offset_by_prop_value(blob, off,
  77                                 "device_type", "cpu", 4);
  78         }
  79
  80         /* Reserve the boot page so OSes dont use it */
  81         if ((u64)bootpg < memory_limit) {
  82                 off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
  83                 if (off < 0)
  84                         printf("Failed to reserve memory for bootpg: %s\n",
  85                                 fdt_strerror(off));
  86         }
  87
  88 #ifndef CONFIG_MPC8xxx_DISABLE_BPTR
  89         /*
  90          * Reserve the default boot page so OSes dont use it.
  91          * The default boot page is always mapped to bootpg above using
  92          * boot page translation.
  93          */
  94         if (0xfffff000ull < memory_limit) {
  95                 off = fdt_add_mem_rsv(blob, 0xfffff000ull, (u64)4096);
  96                 if (off < 0) {
  97                         printf("Failed to reserve memory for 0xfffff000: %s\n",
  98                                 fdt_strerror(off));
  99                 }
 100         }
 101 #endif
 102
 103         /* Reserve spin table page */
 104         if (spin_tbl_addr < memory_limit) {
 105                 off = fdt_add_mem_rsv(blob,
 106                         (spin_tbl_addr & ~0xffful), 4096);
 107                 if (off < 0)
 108                         printf("Failed to reserve memory for spin table: %s\n",
 109                                 fdt_strerror(off));
 110         }
 111 }
 112 #endif
 113
 114 #ifdef CONFIG_SYS_FSL_CPC
 115 static inline void ft_fixup_l3cache(void *blob, int off)
 116 {
 117         u32 line_size, num_ways, size, num_sets;
 118         cpc_corenet_t *cpc = (void *)CONFIG_SYS_FSL_CPC_ADDR;
 119         u32 cfg0 = in_be32(&cpc->cpccfg0);
 120
 121         size = CPC_CFG0_SZ_K(cfg0) * 1024 * CONFIG_SYS_NUM_CPC;
 122         num_ways = CPC_CFG0_NUM_WAYS(cfg0);
 123         line_size = CPC_CFG0_LINE_SZ(cfg0);
 124         num_sets = size / (line_size * num_ways);
 125
 126         fdt_setprop(blob, off, "cache-unified", NULL, 0);
 127         fdt_setprop_cell(blob, off, "cache-block-size", line_size);
 128         fdt_setprop_cell(blob, off, "cache-size", size);
 129         fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 130         fdt_setprop_cell(blob, off, "cache-level", 3);
 131 #ifdef CONFIG_SYS_CACHE_STASHING
 132         fdt_setprop_cell(blob, off, "cache-stash-id", 1);
 133 #endif
 134 }
 135 #else
 136 #define ft_fixup_l3cache(x, y)
 137 #endif
 138
 139 #if defined(CONFIG_L2_CACHE)
 140 /* return size in kilobytes */
 141 static inline u32 l2cache_size(void)
 142 {
 143         volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 144         volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
 145         u32 ver = SVR_SOC_VER(get_svr());
 146
 147         switch (l2siz_field) {
 148         case 0x0:
 149                 break;
 150         case 0x1:
 151                 if (ver == SVR_8540 || ver == SVR_8560   ||
 152                     ver == SVR_8541 || ver == SVR_8555)
 153                         return 128;
 154                 else
 155                         return 256;
 156                 break;
 157         case 0x2:
 158                 if (ver == SVR_8540 || ver == SVR_8560   ||
 159                     ver == SVR_8541 || ver == SVR_8555)
 160                         return 256;
 161                 else
 162                         return 512;
 163                 break;
 164         case 0x3:
 165                 return 1024;
 166                 break;
 167         }
 168
 169         return 0;
 170 }
 171
 172 static inline void ft_fixup_l2cache(void *blob)
 173 {
 174         int len, off;
 175         u32 *ph;
 176         struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
 177
 178         const u32 line_size = 32;
 179         const u32 num_ways = 8;
 180         const u32 size = l2cache_size() * 1024;
 181         const u32 num_sets = size / (line_size * num_ways);
 182
 183         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 184         if (off < 0) {
 185                 debug("no cpu node fount\n");
 186                 return;
 187         }
 188
 189         ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
 190
 191         if (ph == NULL) {
 192                 debug("no next-level-cache property\n");
 193                 return ;
 194         }
 195
 196         off = fdt_node_offset_by_phandle(blob, *ph);
 197         if (off < 0) {
 198                 printf("%s: %s\n", __func__, fdt_strerror(off));
 199                 return ;
 200         }
 201
 202         if (cpu) {
 203                 char buf[40];
 204
 205                 if (isdigit(cpu->name[0])) {
 206                         /* MPCxxxx, where xxxx == 4-digit number */
 207                         len = sprintf(buf, "fsl,mpc%s-l2-cache-controller",
 208                                 cpu->name) + 1;
 209                 } else {
 210                         /* Pxxxx or Txxxx, where xxxx == 4-digit number */
 211                         len = sprintf(buf, "fsl,%c%s-l2-cache-controller",
 212                                 tolower(cpu->name[0]), cpu->name + 1) + 1;
 213                 }
 214
 215                 /*
 216                  * append "cache" after the NULL character that the previous
 217                  * sprintf wrote.  This is how a device tree stores multiple
 218                  * strings in a property.
 219                  */
 220                 len += sprintf(buf + len, "cache") + 1;
 221
 222                 fdt_setprop(blob, off, "compatible", buf, len);
 223         }
 224         fdt_setprop(blob, off, "cache-unified", NULL, 0);
 225         fdt_setprop_cell(blob, off, "cache-block-size", line_size);
 226         fdt_setprop_cell(blob, off, "cache-size", size);
 227         fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 228         fdt_setprop_cell(blob, off, "cache-level", 2);
 229
 230         /* we dont bother w/L3 since no platform of this type has one */
 231 }
 232 #elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
 233         defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 234 static inline void ft_fixup_l2cache(void *blob)
 235 {
 236         int off, l2_off, l3_off = -1;
 237         u32 *ph;
 238 #ifdef  CONFIG_BACKSIDE_L2_CACHE
 239         u32 l2cfg0 = mfspr(SPRN_L2CFG0);
 240 #else
 241         struct ccsr_cluster_l2 *l2cache =
 242                 (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
 243         u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
 244 #endif
 245         u32 size, line_size, num_ways, num_sets;
 246         int has_l2 = 1;
 247
 248         /* P2040/P2040E has no L2, so dont set any L2 props */
 249         if (SVR_SOC_VER(get_svr()) == SVR_P2040)
 250                 has_l2 = 0;
 251
 252         size = (l2cfg0 & 0x3fff) * 64 * 1024;
 253         num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
 254         line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
 255         num_sets = size / (line_size * num_ways);
 256
 257         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 258
 259         while (off != -FDT_ERR_NOTFOUND) {
 260                 ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
 261
 262                 if (ph == NULL) {
 263                         debug("no next-level-cache property\n");
 264                         goto next;
 265                 }
 266
 267                 l2_off = fdt_node_offset_by_phandle(blob, *ph);
 268                 if (l2_off < 0) {
 269                         printf("%s: %s\n", __func__, fdt_strerror(off));
 270                         goto next;
 271                 }
 272
 273                 if (has_l2) {
 274 #ifdef CONFIG_SYS_CACHE_STASHING
 275                         u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 276 #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
 277                         /* Only initialize every eighth thread */
 278                         if (reg && !((*reg) % 8)) {
 279                                 fdt_setprop_cell(blob, l2_off, "cache-stash-id",
 280                                                  (*reg / 4) + 32 + 1);
 281                         }
 282 #else
 283                         if (reg) {
 284                                 fdt_setprop_cell(blob, l2_off, "cache-stash-id",
 285                                                  (*reg * 2) + 32 + 1);
 286                         }
 287 #endif
 288 #endif
 289
 290                         fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
 291                         fdt_setprop_cell(blob, l2_off, "cache-block-size",
 292                                                 line_size);
 293                         fdt_setprop_cell(blob, l2_off, "cache-size", size);
 294                         fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
 295                         fdt_setprop_cell(blob, l2_off, "cache-level", 2);
 296                         fdt_setprop(blob, l2_off, "compatible", "cache", 6);
 297                 }
 298
 299                 if (l3_off < 0) {
 300                         ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
 301
 302                         if (ph == NULL) {
 303                                 debug("no next-level-cache property\n");
 304                                 goto next;
 305                         }
 306                         l3_off = *ph;
 307                 }
 308 next:
 309                 off = fdt_node_offset_by_prop_value(blob, off,
 310                                 "device_type", "cpu", 4);
 311         }
 312         if (l3_off > 0) {
 313                 l3_off = fdt_node_offset_by_phandle(blob, l3_off);
 314                 if (l3_off < 0) {
 315                         printf("%s: %s\n", __func__, fdt_strerror(off));
 316                         return ;
 317                 }
 318                 ft_fixup_l3cache(blob, l3_off);
 319         }
 320 }
 321 #else
 322 #define ft_fixup_l2cache(x)
 323 #endif
 324
 325 static inline void ft_fixup_cache(void *blob)
 326 {
 327         int off;
 328
 329         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 330
 331         while (off != -FDT_ERR_NOTFOUND) {
 332                 u32 l1cfg0 = mfspr(SPRN_L1CFG0);
 333                 u32 l1cfg1 = mfspr(SPRN_L1CFG1);
 334                 u32 isize, iline_size, inum_sets, inum_ways;
 335                 u32 dsize, dline_size, dnum_sets, dnum_ways;
 336
 337                 /* d-side config */
 338                 dsize = (l1cfg0 & 0x7ff) * 1024;
 339                 dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
 340                 dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
 341                 dnum_sets = dsize / (dline_size * dnum_ways);
 342
 343                 fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
 344                 fdt_setprop_cell(blob, off, "d-cache-size", dsize);
 345                 fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
 346
 347 #ifdef CONFIG_SYS_CACHE_STASHING
 348                 {
 349                         u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
 350                         if (reg)
 351                                 fdt_setprop_cell(blob, off, "cache-stash-id",
 352                                          (*reg * 2) + 32 + 0);
 353                 }
 354 #endif
 355
 356                 /* i-side config */
 357                 isize = (l1cfg1 & 0x7ff) * 1024;
 358                 inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
 359                 iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
 360                 inum_sets = isize / (iline_size * inum_ways);
 361
 362                 fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
 363                 fdt_setprop_cell(blob, off, "i-cache-size", isize);
 364                 fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
 365
 366                 off = fdt_node_offset_by_prop_value(blob, off,
 367                                 "device_type", "cpu", 4);
 368         }
 369
 370         ft_fixup_l2cache(blob);
 371 }
 372
 373
 374 void fdt_add_enet_stashing(void *fdt)
 375 {
 376         do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
 377
 378         do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
 379
 380         do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
 381         do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
 382         do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
 383         do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
 384 }
 385
 386 #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
 387 #ifdef CONFIG_SYS_DPAA_FMAN
 388 static void ft_fixup_clks(void *blob, const char *compat, u32 offset,
 389                           unsigned long freq)
 390 {
 391         phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS;
 392         int off = fdt_node_offset_by_compat_reg(blob, compat, phys);
 393
 394         if (off >= 0) {
 395                 off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
 396                 if (off > 0)
 397                         printf("WARNING enable to set clock-frequency "
 398                                 "for %s: %s\n", compat, fdt_strerror(off));
 399         }
 400 }
 401 #endif
 402
 403 static void ft_fixup_dpaa_clks(void *blob)
 404 {
 405         sys_info_t sysinfo;
 406
 407         get_sys_info(&sysinfo);
 408 #ifdef CONFIG_SYS_DPAA_FMAN
 409         ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
 410                         sysinfo.freq_fman[0]);
 411
 412 #if (CONFIG_SYS_NUM_FMAN == 2)
 413         ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
 414                         sysinfo.freq_fman[1]);
 415 #endif
 416 #endif
 417
 418 #ifdef CONFIG_SYS_DPAA_QBMAN
 419         do_fixup_by_compat_u32(blob, "fsl,qman",
 420                         "clock-frequency", sysinfo.freq_qman, 1);
 421 #endif
 422
 423 #ifdef CONFIG_SYS_DPAA_PME
 424         do_fixup_by_compat_u32(blob, "fsl,pme",
 425                 "clock-frequency", sysinfo.freq_pme, 1);
 426 #endif
 427 }
 428 #else
 429 #define ft_fixup_dpaa_clks(x)
 430 #endif
 431
 432 #ifdef CONFIG_QE
 433 static void ft_fixup_qe_snum(void *blob)
 434 {
 435         unsigned int svr;
 436
 437         svr = mfspr(SPRN_SVR);
 438         if (SVR_SOC_VER(svr) == SVR_8569) {
 439                 if(IS_SVR_REV(svr, 1, 0))
 440                         do_fixup_by_compat_u32(blob, "fsl,qe",
 441                                 "fsl,qe-num-snums", 46, 1);
 442                 else
 443                         do_fixup_by_compat_u32(blob, "fsl,qe",
 444                                 "fsl,qe-num-snums", 76, 1);
 445         }
 446 }
 447 #endif
 448
 449 /**
 450  * fdt_fixup_fman_firmware -- insert the Fman firmware into the device tree
 451  *
 452  * The binding for an Fman firmware node is documented in
 453  * Documentation/powerpc/dts-bindings/fsl/dpaa/fman.txt.  This node contains
 454  * the actual Fman firmware binary data.  The operating system is expected to
 455  * be able to parse the binary data to determine any attributes it needs.
 456  */
 457 #ifdef CONFIG_SYS_DPAA_FMAN
 458 void fdt_fixup_fman_firmware(void *blob)
 459 {
 460         int rc, fmnode, fwnode = -1;
 461         uint32_t phandle;
 462         struct qe_firmware *fmanfw;
 463         const struct qe_header *hdr;
 464         unsigned int length;
 465         uint32_t crc;
 466         const char *p;
 467
 468         /* The first Fman we find will contain the actual firmware. */
 469         fmnode = fdt_node_offset_by_compatible(blob, -1, "fsl,fman");
 470         if (fmnode < 0)
 471                 /* Exit silently if there are no Fman devices */
 472                 return;
 473
 474         /* If we already have a firmware node, then also exit silently. */
 475         if (fdt_node_offset_by_compatible(blob, -1, "fsl,fman-firmware") > 0)
 476                 return;
 477
 478         /* If the environment variable is not set, then exit silently */
 479         p = getenv("fman_ucode");
 480         if (!p)
 481                 return;
 482
 483         fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16);
 484         if (!fmanfw)
 485                 return;
 486
 487         hdr = &fmanfw->header;
 488         length = be32_to_cpu(hdr->length);
 489
 490         /* Verify the firmware. */
 491         if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
 492                 (hdr->magic[2] != 'F')) {
 493                 printf("Data at %p is not an Fman firmware\n", fmanfw);
 494                 return;
 495         }
 496
 497         if (length > CONFIG_SYS_QE_FMAN_FW_LENGTH) {
 498                 printf("Fman firmware at %p is too large (size=%u)\n",
 499                        fmanfw, length);
 500                 return;
 501         }
 502
 503         length -= sizeof(u32);  /* Subtract the size of the CRC */
 504         crc = be32_to_cpu(*(u32 *)((void *)fmanfw + length));
 505         if (crc != crc32_no_comp(0, (void *)fmanfw, length)) {
 506                 printf("Fman firmware at %p has invalid CRC\n", fmanfw);
 507                 return;
 508         }
 509
 510         /* Increase the size of the fdt to make room for the node. */
 511         rc = fdt_increase_size(blob, fmanfw->header.length);
 512         if (rc < 0) {
 513                 printf("Unable to make room for Fman firmware: %s\n",
 514                         fdt_strerror(rc));
 515                 return;
 516         }
 517
 518         /* Create the firmware node. */
 519         fwnode = fdt_add_subnode(blob, fmnode, "fman-firmware");
 520         if (fwnode < 0) {
 521                 char s[64];
 522                 fdt_get_path(blob, fmnode, s, sizeof(s));
 523                 printf("Could not add firmware node to %s: %s\n", s,
 524                        fdt_strerror(fwnode));
 525                 return;
 526         }
 527         rc = fdt_setprop_string(blob, fwnode, "compatible", "fsl,fman-firmware");
 528         if (rc < 0) {
 529                 char s[64];
 530                 fdt_get_path(blob, fwnode, s, sizeof(s));
 531                 printf("Could not add compatible property to node %s: %s\n", s,
 532                        fdt_strerror(rc));
 533                 return;
 534         }
 535         phandle = fdt_create_phandle(blob, fwnode);
 536         if (!phandle) {
 537                 char s[64];
 538                 fdt_get_path(blob, fwnode, s, sizeof(s));
 539                 printf("Could not add phandle property to node %s: %s\n", s,
 540                        fdt_strerror(rc));
 541                 return;
 542         }
 543         rc = fdt_setprop(blob, fwnode, "fsl,firmware", fmanfw, fmanfw->header.length);
 544         if (rc < 0) {
 545                 char s[64];
 546                 fdt_get_path(blob, fwnode, s, sizeof(s));
 547                 printf("Could not add firmware property to node %s: %s\n", s,
 548                        fdt_strerror(rc));
 549                 return;
 550         }
 551
 552         /* Find all other Fman nodes and point them to the firmware node. */
 553         while ((fmnode = fdt_node_offset_by_compatible(blob, fmnode, "fsl,fman")) > 0) {
 554                 rc = fdt_setprop_cell(blob, fmnode, "fsl,firmware-phandle", phandle);
 555                 if (rc < 0) {
 556                         char s[64];
 557                         fdt_get_path(blob, fmnode, s, sizeof(s));
 558                         printf("Could not add pointer property to node %s: %s\n",
 559                                s, fdt_strerror(rc));
 560                         return;
 561                 }
 562         }
 563 }
 564 #else
 565 #define fdt_fixup_fman_firmware(x)
 566 #endif
 567
 568 #if defined(CONFIG_PPC_P4080)
 569 static void fdt_fixup_usb(void *fdt)
 570 {
 571         ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 572         u32 rcwsr11 = in_be32(&gur->rcwsr[11]);
 573         int off;
 574
 575         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-mph");
 576         if ((rcwsr11 & FSL_CORENET_RCWSR11_EC1) !=
 577                                 FSL_CORENET_RCWSR11_EC1_FM1_USB1)
 578                 fdt_status_disabled(fdt, off);
 579
 580         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,mpc85xx-usb2-dr");
 581         if ((rcwsr11 & FSL_CORENET_RCWSR11_EC2) !=
 582                                 FSL_CORENET_RCWSR11_EC2_USB2)
 583                 fdt_status_disabled(fdt, off);
 584 }
 585 #else
 586 #define fdt_fixup_usb(x)
 587 #endif
 588
 589 #if defined(CONFIG_PPC_T1040)
 590 static void fdt_fixup_l2_switch(void *blob)
 591 {
 592         uchar l2swaddr[6];
 593         int node;
 594
 595         /* The l2switch node from device-tree has
 596          * compatible string "vitesse-9953" */
 597         node = fdt_node_offset_by_compatible(blob, -1, "vitesse-9953");
 598         if (node == -FDT_ERR_NOTFOUND)
 599                 /* no l2switch node has been found */
 600                 return;
 601
 602         /* Get MAC address for the l2switch from "l2switchaddr"*/
 603         if (!eth_getenv_enetaddr("l2switchaddr", l2swaddr)) {
 604                 printf("Warning: MAC address for l2switch not found\n");
 605                 memset(l2swaddr, 0, sizeof(l2swaddr));
 606         }
 607
 608         /* Add MAC address to l2switch node */
 609         fdt_setprop(blob, node, "local-mac-address", l2swaddr,
 610                     sizeof(l2swaddr));
 611 }
 612 #else
 613 #define fdt_fixup_l2_switch(x)
 614 #endif
 615
 616 void ft_cpu_setup(void *blob, bd_t *bd)
 617 {
 618         int off;
 619         int val;
 620         int len;
 621         sys_info_t sysinfo;
 622
 623         /* delete crypto node if not on an E-processor */
 624         if (!IS_E_PROCESSOR(get_svr()))
 625                 fdt_fixup_crypto_node(blob, 0);
 626 #if CONFIG_SYS_FSL_SEC_COMPAT >= 4
 627         else {
 628                 ccsr_sec_t __iomem *sec;
 629
 630                 sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
 631                 fdt_fixup_crypto_node(blob, in_be32(&sec->secvid_ms));
 632         }
 633 #endif
 634
 635         fdt_fixup_ethernet(blob);
 636
 637         fdt_add_enet_stashing(blob);
 638
 639 #ifndef CONFIG_FSL_TBCLK_EXTRA_DIV
 640 #define CONFIG_FSL_TBCLK_EXTRA_DIV 1
 641 #endif
 642         do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 643                 "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV,
 644                 1);
 645         do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 646                 "bus-frequency", bd->bi_busfreq, 1);
 647         get_sys_info(&sysinfo);
 648         off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 649         while (off != -FDT_ERR_NOTFOUND) {
 650                 u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
 651                 val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]);
 652                 fdt_setprop(blob, off, "clock-frequency", &val, 4);
 653                 off = fdt_node_offset_by_prop_value(blob, off, "device_type",
 654                                                         "cpu", 4);
 655         }
 656         do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 657                 "bus-frequency", bd->bi_busfreq, 1);
 658
 659         do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
 660                 "bus-frequency", gd->arch.lbc_clk, 1);
 661         do_fixup_by_compat_u32(blob, "fsl,elbc",
 662                 "bus-frequency", gd->arch.lbc_clk, 1);
 663 #ifdef CONFIG_QE
 664         ft_qe_setup(blob);
 665         ft_fixup_qe_snum(blob);
 666 #endif
 667
 668         fdt_fixup_fman_firmware(blob);
 669
 670 #ifdef CONFIG_SYS_NS16550
 671         do_fixup_by_compat_u32(blob, "ns16550",
 672                 "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
 673 #endif
 674
 675 #ifdef CONFIG_CPM2
 676         do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
 677                 "current-speed", gd->baudrate, 1);
 678
 679         do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
 680                 "clock-frequency", bd->bi_brgfreq, 1);
 681 #endif
 682
 683 #ifdef CONFIG_FSL_CORENET
 684         do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-1.0",
 685                 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
 686         do_fixup_by_compat_u32(blob, "fsl,qoriq-clockgen-2.0",
 687                 "clock-frequency", CONFIG_SYS_CLK_FREQ, 1);
 688         do_fixup_by_compat_u32(blob, "fsl,mpic",
 689                 "clock-frequency", get_bus_freq(0)/2, 1);
 690 #else
 691         do_fixup_by_compat_u32(blob, "fsl,mpic",
 692                 "clock-frequency", get_bus_freq(0), 1);
 693 #endif
 694
 695         fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 696
 697 #ifdef CONFIG_MP
 698         ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
 699         ft_fixup_num_cores(blob);
 700 #endif
 701
 702         ft_fixup_cache(blob);
 703
 704 #if defined(CONFIG_FSL_ESDHC)
 705         fdt_fixup_esdhc(blob, bd);
 706 #endif
 707
 708         ft_fixup_dpaa_clks(blob);
 709
 710 #if defined(CONFIG_SYS_BMAN_MEM_PHYS)
 711         fdt_portal(blob, "fsl,bman-portal", "bman-portals",
 712                         (u64)CONFIG_SYS_BMAN_MEM_PHYS,
 713                         CONFIG_SYS_BMAN_MEM_SIZE);
 714         fdt_fixup_bportals(blob);
 715 #endif
 716
 717 #if defined(CONFIG_SYS_QMAN_MEM_PHYS)
 718         fdt_portal(blob, "fsl,qman-portal", "qman-portals",
 719                         (u64)CONFIG_SYS_QMAN_MEM_PHYS,
 720                         CONFIG_SYS_QMAN_MEM_SIZE);
 721
 722         fdt_fixup_qportals(blob);
 723 #endif
 724
 725 #ifdef CONFIG_SYS_SRIO
 726         ft_srio_setup(blob);
 727 #endif
 728
 729         /*
 730          * system-clock = CCB clock/2
 731          * Here gd->bus_clk = CCB clock
 732          * We are using the system clock as 1588 Timer reference
 733          * clock source select
 734          */
 735         do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
 736                         "timer-frequency", gd->bus_clk/2, 1);
 737
 738         /*
 739          * clock-freq should change to clock-frequency and
 740          * flexcan-v1.0 should change to p1010-flexcan respectively
 741          * in the future.
 742          */
 743         do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
 744                         "clock_freq", gd->bus_clk/2, 1);
 745
 746         do_fixup_by_compat_u32(blob, "fsl,flexcan-v1.0",
 747                         "clock-frequency", gd->bus_clk/2, 1);
 748
 749         do_fixup_by_compat_u32(blob, "fsl,p1010-flexcan",
 750                         "clock-frequency", gd->bus_clk/2, 1);
 751
 752         fdt_fixup_usb(blob);
 753
 754         fdt_fixup_l2_switch(blob);
 755 }
 756
 757 /*
 758  * For some CCSR devices, we only have the virtual address, not the physical
 759  * address.  This is because we map CCSR as a whole, so we typically don't need
 760  * a macro for the physical address of any device within CCSR.  In this case,
 761  * we calculate the physical address of that device using it's the difference
 762  * between the virtual address of the device and the virtual address of the
 763  * beginning of CCSR.
 764  */
 765 #define CCSR_VIRT_TO_PHYS(x) \
 766         (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR))
 767
 768 static void msg(const char *name, uint64_t uaddr, uint64_t daddr)
 769 {
 770         printf("Warning: U-Boot configured %s at address %llx,\n"
 771                "but the device tree has it at %llx\n", name, uaddr, daddr);
 772 }
 773
 774 /*
 775  * Verify the device tree
 776  *
 777  * This function compares several CONFIG_xxx macros that contain physical
 778  * addresses with the corresponding nodes in the device tree, to see if
 779  * the physical addresses are all correct.  For example, if
 780  * CONFIG_SYS_NS16550_COM1 is defined, then it contains the virtual address
 781  * of the first UART.  We convert this to a physical address and compare
 782  * that with the physical address of the first ns16550-compatible node
 783  * in the device tree.  If they don't match, then we display a warning.
 784  *
 785  * Returns 1 on success, 0 on failure
 786  */
 787 int ft_verify_fdt(void *fdt)
 788 {
 789         uint64_t addr = 0;
 790         int aliases;
 791         int off;
 792
 793         /* First check the CCSR base address */
 794         off = fdt_node_offset_by_prop_value(fdt, -1, "device_type", "soc", 4);
 795         if (off > 0)
 796                 addr = fdt_get_base_address(fdt, off);
 797
 798         if (!addr) {
 799                 printf("Warning: could not determine base CCSR address in "
 800                        "device tree\n");
 801                 /* No point in checking anything else */
 802                 return 0;
 803         }
 804
 805         if (addr != CONFIG_SYS_CCSRBAR_PHYS) {
 806                 msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr);
 807                 /* No point in checking anything else */
 808                 return 0;
 809         }
 810
 811         /*
 812          * Check some nodes via aliases.  We assume that U-Boot and the device
 813          * tree enumerate the devices equally.  E.g. the first serial port in
 814          * U-Boot is the same as "serial0" in the device tree.
 815          */
 816         aliases = fdt_path_offset(fdt, "/aliases");
 817         if (aliases > 0) {
 818 #ifdef CONFIG_SYS_NS16550_COM1
 819                 if (!fdt_verify_alias_address(fdt, aliases, "serial0",
 820                         CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM1)))
 821                         return 0;
 822 #endif
 823
 824 #ifdef CONFIG_SYS_NS16550_COM2
 825                 if (!fdt_verify_alias_address(fdt, aliases, "serial1",
 826                         CCSR_VIRT_TO_PHYS(CONFIG_SYS_NS16550_COM2)))
 827                         return 0;
 828 #endif
 829         }
 830
 831         /*
 832          * The localbus node is typically a root node, even though the lbc
 833          * controller is part of CCSR.  If we were to put the lbc node under
 834          * the SOC node, then the 'ranges' property in the lbc node would
 835          * translate through the 'ranges' property of the parent SOC node, and
 836          * we don't want that.  Since it's a separate node, it's possible for
 837          * the 'reg' property to be wrong, so check it here.  For now, we
 838          * only check for "fsl,elbc" nodes.
 839          */
 840 #ifdef CONFIG_SYS_LBC_ADDR
 841         off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc");
 842         if (off > 0) {
 843                 const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL);
 844                 if (reg) {
 845                         uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR);
 846
 847                         addr = fdt_translate_address(fdt, off, reg);
 848                         if (uaddr != addr) {
 849                                 msg("the localbus", uaddr, addr);
 850                                 return 0;
 851                         }
 852                 }
 853         }
 854 #endif
 855
 856         return 1;
 857 }