arch/powerpc/cpu/mpc85xx/pci.c

   1 /*
   2  * Copyright 2004 Freescale Semiconductor.
   3  * Copyright (C) 2003 Motorola Inc.
   4  * Xianghua Xiao (x.xiao@motorola.com)
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 /*
  26  * PCI Configuration space access support for MPC85xx PCI Bridge
  27  */
  28 #include <common.h>
  29 #include <asm/cpm_85xx.h>
  30 #include <pci.h>
  31
  32 #if !defined(CONFIG_FSL_PCI_INIT)
  33
  34 #ifndef CONFIG_SYS_PCI1_MEM_BUS
  35 #define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
  36 #endif
  37
  38 #ifndef CONFIG_SYS_PCI1_IO_BUS
  39 #define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE
  40 #endif
  41
  42 #ifndef CONFIG_SYS_PCI2_MEM_BUS
  43 #define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE
  44 #endif
  45
  46 #ifndef CONFIG_SYS_PCI2_IO_BUS
  47 #define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE
  48 #endif
  49
  50 static struct pci_controller *pci_hose;
  51
  52 void
  53 pci_mpc85xx_init(struct pci_controller *board_hose)
  54 {
  55         u16 reg16;
  56         u32 dev;
  57
  58         volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
  59 #ifdef CONFIG_MPC85XX_PCI2
  60         volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR);
  61 #endif
  62         volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
  63         struct pci_controller * hose;
  64
  65         pci_hose = board_hose;
  66
  67         hose = &pci_hose[0];
  68
  69         hose->first_busno = 0;
  70         hose->last_busno = 0xff;
  71
  72         pci_setup_indirect(hose,
  73                            (CONFIG_SYS_IMMR+0x8000),
  74                            (CONFIG_SYS_IMMR+0x8004));
  75
  76         /*
  77          * Hose scan.
  78          */
  79         dev = PCI_BDF(hose->first_busno, 0, 0);
  80         pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
  81         reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
  82         pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
  83
  84         /*
  85          * Clear non-reserved bits in status register.
  86          */
  87         pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
  88
  89         if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
  90                 /* PCI-X init */
  91                 if (CONFIG_SYS_CLK_FREQ < 66000000)
  92                         printf("PCI-X will only work at 66 MHz\n");
  93
  94                 reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
  95                         | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
  96                 pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
  97         }
  98
  99         pcix->potar1   = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff;
 100         pcix->potear1  = 0x00000000;
 101         pcix->powbar1  = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
 102         pcix->powbear1 = 0x00000000;
 103         pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
 104                         POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
 105
 106         pcix->potar2  = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff;
 107         pcix->potear2  = 0x00000000;
 108         pcix->powbar2  = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
 109         pcix->powbear2 = 0x00000000;
 110         pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
 111                         POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1));
 112
 113         pcix->pitar1 = 0x00000000;
 114         pcix->piwbar1 = 0x00000000;
 115         pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
 116                         PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
 117
 118         pcix->powar3 = 0;
 119         pcix->powar4 = 0;
 120         pcix->piwar2 = 0;
 121         pcix->piwar3 = 0;
 122
 123         pci_set_region(hose->regions + 0,
 124                        CONFIG_SYS_PCI1_MEM_BUS,
 125                        CONFIG_SYS_PCI1_MEM_PHYS,
 126                        CONFIG_SYS_PCI1_MEM_SIZE,
 127                        PCI_REGION_MEM);
 128
 129         pci_set_region(hose->regions + 1,
 130                        CONFIG_SYS_PCI1_IO_BUS,
 131                        CONFIG_SYS_PCI1_IO_PHYS,
 132                        CONFIG_SYS_PCI1_IO_SIZE,
 133                        PCI_REGION_IO);
 134
 135         hose->region_count = 2;
 136
 137         pci_register_hose(hose);
 138
 139 #if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
 140         /*
 141          * This is a SW workaround for an apparent HW problem
 142          * in the PCI controller on the MPC85555/41 CDS boards.
 143          * The first config cycle must be to a valid, known
 144          * device on the PCI bus in order to trick the PCI
 145          * controller state machine into a known valid state.
 146          * Without this, the first config cycle has the chance
 147          * of hanging the controller permanently, just leaving
 148          * it in a semi-working state, or leaving it working.
 149          *
 150          * Pick on the Tundra, Device 17, to get it right.
 151          */
 152         {
 153                 u8 header_type;
 154
 155                 pci_hose_read_config_byte(hose,
 156                                           PCI_BDF(0,BRIDGE_ID,0),
 157                                           PCI_HEADER_TYPE,
 158                                           &header_type);
 159         }
 160 #endif
 161
 162         hose->last_busno = pci_hose_scan(hose);
 163
 164 #ifdef CONFIG_MPC85XX_PCI2
 165         hose = &pci_hose[1];
 166
 167         hose->first_busno = pci_hose[0].last_busno + 1;
 168         hose->last_busno = 0xff;
 169
 170         pci_setup_indirect(hose,
 171                            (CONFIG_SYS_IMMR+0x9000),
 172                            (CONFIG_SYS_IMMR+0x9004));
 173
 174         dev = PCI_BDF(hose->first_busno, 0, 0);
 175         pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
 176         reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
 177         pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
 178
 179         /*
 180          * Clear non-reserved bits in status register.
 181          */
 182         pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
 183
 184         pcix2->potar1   = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff;
 185         pcix2->potear1  = 0x00000000;
 186         pcix2->powbar1  = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
 187         pcix2->powbear1 = 0x00000000;
 188         pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
 189                         POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
 190
 191         pcix2->potar2  = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff;
 192         pcix2->potear2  = 0x00000000;
 193         pcix2->powbar2  = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
 194         pcix2->powbear2 = 0x00000000;
 195         pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
 196                         POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1));
 197
 198         pcix2->pitar1 = 0x00000000;
 199         pcix2->piwbar1 = 0x00000000;
 200         pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
 201                         PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
 202
 203         pcix2->powar3 = 0;
 204         pcix2->powar4 = 0;
 205         pcix2->piwar2 = 0;
 206         pcix2->piwar3 = 0;
 207
 208         pci_set_region(hose->regions + 0,
 209                        CONFIG_SYS_PCI2_MEM_BUS,
 210                        CONFIG_SYS_PCI2_MEM_PHYS,
 211                        CONFIG_SYS_PCI2_MEM_SIZE,
 212                        PCI_REGION_MEM);
 213
 214         pci_set_region(hose->regions + 1,
 215                        CONFIG_SYS_PCI2_IO_BUS,
 216                        CONFIG_SYS_PCI2_IO_PHYS,
 217                        CONFIG_SYS_PCI2_IO_SIZE,
 218                        PCI_REGION_IO);
 219
 220         hose->region_count = 2;
 221
 222         /*
 223          * Hose scan.
 224          */
 225         pci_register_hose(hose);
 226
 227         hose->last_busno = pci_hose_scan(hose);
 228 #endif
 229 }
 230 #endif /* !CONFIG_FSL_PCI_INIT */