arch/powerpc/cpu/mpc8xxx/srio.c

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <config.h>
   9 #include <asm/fsl_law.h>
  10 #include <asm/fsl_serdes.h>
  11 #include <asm/fsl_srio.h>
  12 #include <asm/errno.h>
  13
  14 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
  15 #define SRIO_PORT_ACCEPT_ALL 0x10000001
  16 #define SRIO_IB_ATMU_AR 0x80f55000
  17 #define SRIO_OB_ATMU_AR_MAINT 0x80077000
  18 #define SRIO_OB_ATMU_AR_RW 0x80045000
  19 #define SRIO_LCSBA1CSR_OFFSET 0x5c
  20 #define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */
  21 #define SRIO_RW_WIN_SIZE 0x100000 /* 1M */
  22 #define SRIO_LCSBA1CSR 0x60000000
  23 #endif
  24
  25 #if defined(CONFIG_FSL_CORENET)
  26 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
  27         #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1
  28         #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2
  29 #else
  30         #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
  31         #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2
  32 #endif
  33         #define _DEVDISR_RMU   FSL_CORENET_DEVDISR_RMU
  34         #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
  35 #elif defined(CONFIG_MPC85xx)
  36         #define _DEVDISR_SRIO1 MPC85xx_DEVDISR_SRIO
  37         #define _DEVDISR_SRIO2 MPC85xx_DEVDISR_SRIO
  38         #define _DEVDISR_RMU   MPC85xx_DEVDISR_RMSG
  39         #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
  40 #elif defined(CONFIG_MPC86xx)
  41         #define _DEVDISR_SRIO1 MPC86xx_DEVDISR_SRIO
  42         #define _DEVDISR_SRIO2 MPC86xx_DEVDISR_SRIO
  43         #define _DEVDISR_RMU   MPC86xx_DEVDISR_RMSG
  44         #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \
  45                 (&((immap_t *)CONFIG_SYS_IMMR)->im_gur)
  46 #else
  47 #error "No defines for DEVDISR_SRIO"
  48 #endif
  49
  50 #ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
  51 /*
  52  * Erratum A-004034
  53  * Affects: SRIO
  54  * Description: During port initialization, the SRIO port performs
  55  * lane synchronization (detecting valid symbols on a lane) and
  56  * lane alignment (coordinating multiple lanes to receive valid data
  57  * across lanes). Internal errors in lane synchronization and lane
  58  * alignment may cause failure to achieve link initialization at
  59  * the configured port width.
  60  * An SRIO port configured as a 4x port may see one of these scenarios:
  61  * 1. One or more lanes fails to achieve lane synchronization. Depending
  62  * on which lanes fail, this may result in downtraining from 4x to 1x
  63  * on lane 0, 4x to 1x on lane R (redundant lane).
  64  * 2. The link may fail to achieve lane alignment as a 4x, even though
  65  * all 4 lanes achieve lane synchronization, and downtrain to a 1x.
  66  * An SRIO port configured as a 1x port may fail to complete port
  67  * initialization (PnESCSR[PU] never deasserts) because of scenario 1.
  68  * Impact: SRIO port may downtrain to 1x, or may fail to complete
  69  * link initialization. Once a port completes link initialization
  70  * successfully, it will operate normally.
  71  */
  72 static int srio_erratum_a004034(u8 port)
  73 {
  74         serdes_corenet_t *srds_regs;
  75         u32 conf_lane;
  76         u32 init_lane;
  77         int idx, first, last;
  78         u32 i;
  79         unsigned long long end_tick;
  80         struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
  81
  82         srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR);
  83         conf_lane = (in_be32((void *)&srds_regs->srdspccr0)
  84                         >> (12 - port * 4)) & 0x3;
  85         init_lane = (in_be32((void *)&srio_regs->lp_serial
  86                         .port[port].pccsr) >> 27) & 0x7;
  87
  88         /*
  89          * Start a counter set to ~2 ms after the SERDES reset is
  90          * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n
  91          * corresponding to the SERDES bank/PLL for the SRIO port).
  92          */
  93          if (in_be32((void *)&srds_regs->bank[0].rstctl)
  94                 & SRDS_RSTCTL_RSTDONE) {
  95                 /*
  96                  * Poll the port uninitialized status (SRIO PnESCSR[PO]) until
  97                  * PO=1 or the counter expires. If the counter expires, the
  98                  * port has failed initialization: go to recover steps. If PO=1
  99                  * and the desired port width is 1x, go to normal steps. If
 100                  * PO = 1 and the desired port width is 4x, go to recover steps.
 101                  */
 102                 end_tick = usec2ticks(2000) + get_ticks();
 103                 do {
 104                         if (in_be32((void *)&srio_regs->lp_serial
 105                                 .port[port].pescsr) & 0x2) {
 106                                 if (conf_lane == 0x1)
 107                                         goto host_ok;
 108                                 else {
 109                                         if (init_lane == 0x2)
 110                                                 goto host_ok;
 111                                         else
 112                                                 break;
 113                                 }
 114                         }
 115                 } while (end_tick > get_ticks());
 116
 117                 /* recover at most 3 times */
 118                 for (i = 0; i < 3; i++) {
 119                         /* Set SRIO PnCCSR[PD]=1 */
 120                         setbits_be32((void *)&srio_regs->lp_serial
 121                                         .port[port].pccsr,
 122                                         0x800000);
 123                         /*
 124                         * Set SRIO PnPCR[OBDEN] on the host to
 125                         * enable the discarding of any pending packets.
 126                         */
 127                         setbits_be32((void *)&srio_regs->impl.port[port].pcr,
 128                                 0x04);
 129                         /* Wait 50 us */
 130                         udelay(50);
 131                         /* Run sync command */
 132                         isync();
 133
 134                         if (port)
 135                                 first = serdes_get_first_lane(SRIO2);
 136                         else
 137                                 first = serdes_get_first_lane(SRIO1);
 138                         if (unlikely(first < 0))
 139                                 return -ENODEV;
 140                         if (conf_lane == 0x1)
 141                                 last = first;
 142                         else
 143                                 last = first + 3;
 144                         /*
 145                          * Set SERDES BnGCRm0[RRST]=0 for each SRIO
 146                          * bank n and lane m.
 147                          */
 148                         for (idx = first; idx <= last; idx++)
 149                                 clrbits_be32(&srds_regs->lane[idx].gcr0,
 150                                 SRDS_GCR0_RRST);
 151                         /*
 152                          * Read SERDES BnGCRm0 for each SRIO
 153                          * bank n and lane m
 154                          */
 155                         for (idx = first; idx <= last; idx++)
 156                                 in_be32(&srds_regs->lane[idx].gcr0);
 157                         /* Run sync command */
 158                         isync();
 159                         /* Wait >= 100 ns */
 160                         udelay(1);
 161                         /*
 162                          * Set SERDES BnGCRm0[RRST]=1 for each SRIO
 163                          * bank n and lane m.
 164                          */
 165                         for (idx = first; idx <= last; idx++)
 166                                 setbits_be32(&srds_regs->lane[idx].gcr0,
 167                                 SRDS_GCR0_RRST);
 168                         /*
 169                          * Read SERDES BnGCRm0 for each SRIO
 170                          * bank n and lane m
 171                          */
 172                         for (idx = first; idx <= last; idx++)
 173                                 in_be32(&srds_regs->lane[idx].gcr0);
 174                         /* Run sync command */
 175                         isync();
 176                         /* Wait >= 300 ns */
 177                         udelay(1);
 178
 179                         /* Write 1 to clear all bits in SRIO PnSLCSR */
 180                         out_be32((void *)&srio_regs->impl.port[port].slcsr,
 181                                 0xffffffff);
 182                         /* Clear SRIO PnPCR[OBDEN] on the host */
 183                         clrbits_be32((void *)&srio_regs->impl.port[port].pcr,
 184                                 0x04);
 185                         /* Set SRIO PnCCSR[PD]=0 */
 186                         clrbits_be32((void *)&srio_regs->lp_serial
 187                                 .port[port].pccsr,
 188                                 0x800000);
 189                         /* Wait >= 24 ms */
 190                         udelay(24000);
 191                         /* Poll the state of the port again */
 192                         init_lane =
 193                                 (in_be32((void *)&srio_regs->lp_serial
 194                                         .port[port].pccsr) >> 27) & 0x7;
 195                         if (in_be32((void *)&srio_regs->lp_serial
 196                                 .port[port].pescsr) & 0x2) {
 197                                 if (conf_lane == 0x1)
 198                                         goto host_ok;
 199                                 else {
 200                                         if (init_lane == 0x2)
 201                                                 goto host_ok;
 202                                 }
 203                         }
 204                         if (i == 2)
 205                                 return -ENODEV;
 206                 }
 207         } else
 208                 return -ENODEV;
 209
 210 host_ok:
 211         /* Poll PnESCSR[OES] on the host until it is clear */
 212         end_tick = usec2ticks(1000000) + get_ticks();
 213         do {
 214                 if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr)
 215                         & 0x10000)) {
 216                         out_be32(((void *)&srio_regs->lp_serial
 217                                 .port[port].pescsr), 0xffffffff);
 218                         out_be32(((void *)&srio_regs->phys_err
 219                                 .port[port].edcsr), 0);
 220                         out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0);
 221                         return 0;
 222                 }
 223         } while (end_tick > get_ticks());
 224
 225         return -ENODEV;
 226 }
 227 #endif
 228
 229 void srio_init(void)
 230 {
 231         ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
 232         int srio1_used = 0, srio2_used = 0;
 233         u32 *devdisr;
 234
 235 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
 236         devdisr = &gur->devdisr3;
 237 #else
 238         devdisr = &gur->devdisr;
 239 #endif
 240         if (is_serdes_configured(SRIO1)) {
 241                 set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS,
 242                                 law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE),
 243                                 LAW_TRGT_IF_RIO_1);
 244                 srio1_used = 1;
 245 #ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 246                 if (srio_erratum_a004034(0) < 0)
 247                         printf("SRIO1: enabled but port error\n");
 248                 else
 249 #endif
 250                 printf("SRIO1: enabled\n");
 251         } else {
 252                 printf("SRIO1: disabled\n");
 253         }
 254
 255 #ifdef CONFIG_SRIO2
 256         if (is_serdes_configured(SRIO2)) {
 257                 set_next_law(CONFIG_SYS_SRIO2_MEM_PHYS,
 258                                 law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE),
 259                                 LAW_TRGT_IF_RIO_2);
 260                 srio2_used = 1;
 261 #ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 262                 if (srio_erratum_a004034(1) < 0)
 263                         printf("SRIO2: enabled but port error\n");
 264                 else
 265 #endif
 266                 printf("SRIO2: enabled\n");
 267
 268         } else {
 269                 printf("SRIO2: disabled\n");
 270         }
 271 #endif
 272
 273 #ifdef CONFIG_FSL_CORENET
 274         /* On FSL_CORENET devices we can disable individual ports */
 275         if (!srio1_used)
 276                 setbits_be32(devdisr, _DEVDISR_SRIO1);
 277         if (!srio2_used)
 278                 setbits_be32(devdisr, _DEVDISR_SRIO2);
 279 #endif
 280
 281         /* neither port is used - disable everything */
 282         if (!srio1_used && !srio2_used) {
 283                 setbits_be32(devdisr, _DEVDISR_SRIO1);
 284                 setbits_be32(devdisr, _DEVDISR_SRIO2);
 285                 setbits_be32(devdisr, _DEVDISR_RMU);
 286         }
 287 }
 288
 289 #ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
 290 void srio_boot_master(int port)
 291 {
 292         struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
 293
 294         /* set port accept-all */
 295         out_be32((void *)&srio->impl.port[port - 1].ptaacr,
 296                                 SRIO_PORT_ACCEPT_ALL);
 297
 298         debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n", port);
 299         /* configure inbound window for slave's u-boot image */
 300         debug("SRIOBOOT - MASTER: Inbound window for slave's image; "
 301                         "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
 302                         (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
 303                         (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1,
 304                         CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
 305         out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwtar,
 306                         CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS >> 12);
 307         out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwbar,
 308                         CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 >> 12);
 309         out_be32((void *)&srio->atmu.port[port - 1].inbw[0].riwar,
 310                         SRIO_IB_ATMU_AR
 311                         | atmu_size_mask(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE));
 312
 313         /* configure inbound window for slave's u-boot image */
 314         debug("SRIOBOOT - MASTER: Inbound window for slave's image; "
 315                         "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
 316                         (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS,
 317                         (u64)CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2,
 318                         CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE);
 319         out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwtar,
 320                         CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS >> 12);
 321         out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwbar,
 322                         CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 >> 12);
 323         out_be32((void *)&srio->atmu.port[port - 1].inbw[1].riwar,
 324                         SRIO_IB_ATMU_AR
 325                         | atmu_size_mask(CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE));
 326
 327         /* configure inbound window for slave's ucode and ENV */
 328         debug("SRIOBOOT - MASTER: Inbound window for slave's ucode and ENV; "
 329                         "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n",
 330                         (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS,
 331                         (u64)CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS,
 332                         CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE);
 333         out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwtar,
 334                         CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS >> 12);
 335         out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwbar,
 336                         CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS >> 12);
 337         out_be32((void *)&srio->atmu.port[port - 1].inbw[2].riwar,
 338                         SRIO_IB_ATMU_AR
 339                         | atmu_size_mask(CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE));
 340 }
 341
 342 void srio_boot_master_release_slave(int port)
 343 {
 344         struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
 345         u32 escsr;
 346         debug("SRIOBOOT - MASTER: "
 347                         "Check the port status and release slave core ...\n");
 348
 349         escsr = in_be32((void *)&srio->lp_serial.port[port - 1].pescsr);
 350         if (escsr & 0x2) {
 351                 if (escsr & 0x10100) {
 352                         debug("SRIOBOOT - MASTER: Port [ %d ] is error.\n",
 353                                 port);
 354                 } else {
 355                         debug("SRIOBOOT - MASTER: "
 356                                 "Port [ %d ] is ready, now release slave's core ...\n",
 357                                 port);
 358                         /*
 359                          * configure outbound window
 360                          * with maintenance attribute to set slave's LCSBA1CSR
 361                          */
 362                         out_be32((void *)&srio->atmu.port[port - 1]
 363                                 .outbw[1].rowtar, 0);
 364                         out_be32((void *)&srio->atmu.port[port - 1]
 365                                 .outbw[1].rowtear, 0);
 366                         if (port - 1)
 367                                 out_be32((void *)&srio->atmu.port[port - 1]
 368                                         .outbw[1].rowbar,
 369                                         CONFIG_SYS_SRIO2_MEM_PHYS >> 12);
 370                         else
 371                                 out_be32((void *)&srio->atmu.port[port - 1]
 372                                         .outbw[1].rowbar,
 373                                         CONFIG_SYS_SRIO1_MEM_PHYS >> 12);
 374                         out_be32((void *)&srio->atmu.port[port - 1]
 375                                         .outbw[1].rowar,
 376                                         SRIO_OB_ATMU_AR_MAINT
 377                                         | atmu_size_mask(SRIO_MAINT_WIN_SIZE));
 378
 379                         /*
 380                          * configure outbound window
 381                          * with R/W attribute to set slave's BRR
 382                          */
 383                         out_be32((void *)&srio->atmu.port[port - 1]
 384                                 .outbw[2].rowtar,
 385                                 SRIO_LCSBA1CSR >> 9);
 386                         out_be32((void *)&srio->atmu.port[port - 1]
 387                                 .outbw[2].rowtear, 0);
 388                         if (port - 1)
 389                                 out_be32((void *)&srio->atmu.port[port - 1]
 390                                         .outbw[2].rowbar,
 391                                         (CONFIG_SYS_SRIO2_MEM_PHYS
 392                                         + SRIO_MAINT_WIN_SIZE) >> 12);
 393                         else
 394                                 out_be32((void *)&srio->atmu.port[port - 1]
 395                                         .outbw[2].rowbar,
 396                                         (CONFIG_SYS_SRIO1_MEM_PHYS
 397                                         + SRIO_MAINT_WIN_SIZE) >> 12);
 398                         out_be32((void *)&srio->atmu.port[port - 1]
 399                                 .outbw[2].rowar,
 400                                 SRIO_OB_ATMU_AR_RW
 401                                 | atmu_size_mask(SRIO_RW_WIN_SIZE));
 402
 403                         /*
 404                          * Set the LCSBA1CSR register in slave
 405                          * by the maint-outbound window
 406                          */
 407                         if (port - 1) {
 408                                 out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
 409                                         + SRIO_LCSBA1CSR_OFFSET,
 410                                         SRIO_LCSBA1CSR);
 411                                 while (in_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
 412                                         + SRIO_LCSBA1CSR_OFFSET)
 413                                         != SRIO_LCSBA1CSR)
 414                                         ;
 415                                 /*
 416                                  * And then set the BRR register
 417                                  * to release slave core
 418                                  */
 419                                 out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT
 420                                         + SRIO_MAINT_WIN_SIZE
 421                                         + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET,
 422                                         CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK);
 423                         } else {
 424                                 out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
 425                                         + SRIO_LCSBA1CSR_OFFSET,
 426                                         SRIO_LCSBA1CSR);
 427                                 while (in_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
 428                                         + SRIO_LCSBA1CSR_OFFSET)
 429                                         != SRIO_LCSBA1CSR)
 430                                         ;
 431                                 /*
 432                                  * And then set the BRR register
 433                                  * to release slave core
 434                                  */
 435                                 out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT
 436                                         + SRIO_MAINT_WIN_SIZE
 437                                         + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET,
 438                                         CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK);
 439                         }
 440                         debug("SRIOBOOT - MASTER: "
 441                                         "Release slave successfully! Now the slave should start up!\n");
 442                 }
 443         } else
 444                 debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n", port);
 445 }
 446 #endif