arch/powerpc/cpu/ppc4xx/usb_ohci.c

   1 /*
   2  * URB OHCI HCD (Host Controller Driver) for USB on the PPC440EP.
   3  *
   4  * (C) Copyright 2003-2004
   5  * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
   6  *
   7  * (C) Copyright 2004
   8  * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
   9  *
  10  * Note: Much of this code has been derived from Linux 2.4
  11  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  12  * (C) Copyright 2000-2002 David Brownell
  13  *
  14  * SPDX-License-Identifier:     GPL-2.0+
  15  */
  16 /*
  17  * IMPORTANT NOTES
  18  * 1 - this driver is intended for use with USB Mass Storage Devices
  19  *     (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
  20  */
  21
  22 #include <common.h>
  23
  24 #ifdef CONFIG_USB_OHCI
  25
  26 #include <malloc.h>
  27 #include <usb.h>
  28 #include "usb_ohci.h"
  29
  30 #define OHCI_USE_NPS            /* force NoPowerSwitching mode */
  31 #undef OHCI_VERBOSE_DEBUG       /* not always helpful */
  32 #undef DEBUG
  33 #undef SHOW_INFO
  34 #undef OHCI_FILL_TRACE
  35
  36 /* For initializing controller (mask in an HCFS mode too) */
  37 #define OHCI_CONTROL_INIT \
  38         (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
  39
  40 #define readl(a) (*((volatile u32 *)(a)))
  41 #define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
  42
  43 #define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
  44
  45 #ifdef DEBUG
  46 #define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
  47 #else
  48 #define dbg(format, arg...) do {} while(0)
  49 #endif /* DEBUG */
  50 #define err(format, arg...) printf("ERROR: " format "\n", ## arg)
  51 #ifdef SHOW_INFO
  52 #define info(format, arg...) printf("INFO: " format "\n", ## arg)
  53 #else
  54 #define info(format, arg...) do {} while(0)
  55 #endif
  56
  57 #define m16_swap(x) swap_16(x)
  58 #define m32_swap(x) swap_32(x)
  59
  60 #if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
  61 #define ohci_cpu_to_le16(x) (x)
  62 #define ohci_cpu_to_le32(x) (x)
  63 #else
  64 #define ohci_cpu_to_le16(x) swap_16(x)
  65 #define ohci_cpu_to_le32(x) swap_32(x)
  66 #endif
  67
  68 /* global ohci_t */
  69 static ohci_t gohci;
  70 /* this must be aligned to a 256 byte boundary */
  71 struct ohci_hcca ghcca[1];
  72 /* a pointer to the aligned storage */
  73 struct ohci_hcca *phcca;
  74 /* this allocates EDs for all possible endpoints */
  75 struct ohci_device ohci_dev;
  76 /* urb_priv */
  77 urb_priv_t urb_priv;
  78 /* RHSC flag */
  79 int got_rhsc;
  80 /* device which was disconnected */
  81 struct usb_device *devgone;
  82 /* flag guarding URB transation */
  83 int urb_finished = 0;
  84
  85 /*-------------------------------------------------------------------------*/
  86
  87 /* AMD-756 (D2 rev) reports corrupt register contents in some cases.
  88  * The erratum (#4) description is incorrect.  AMD's workaround waits
  89  * till some bits (mostly reserved) are clear; ok for all revs.
  90  */
  91 #define OHCI_QUIRK_AMD756 0xabcd
  92 #define read_roothub(hc, register, mask) ({ \
  93         u32 temp = readl (&hc->regs->roothub.register); \
  94         if (hc->flags & OHCI_QUIRK_AMD756) \
  95                 while (temp & mask) \
  96                         temp = readl (&hc->regs->roothub.register); \
  97         temp; })
  98
  99 static u32 roothub_a (struct ohci *hc)
 100         { return read_roothub (hc, a, 0xfc0fe000); }
 101 static inline u32 roothub_b (struct ohci *hc)
 102         { return readl (&hc->regs->roothub.b); }
 103 static inline u32 roothub_status (struct ohci *hc)
 104         { return readl (&hc->regs->roothub.status); }
 105 static u32 roothub_portstatus (struct ohci *hc, int i)
 106         { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
 107
 108
 109 /* forward declaration */
 110 static int hc_interrupt (void);
 111 static void
 112 td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
 113         int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
 114
 115 /*-------------------------------------------------------------------------*
 116  * URB support functions
 117  *-------------------------------------------------------------------------*/
 118
 119 /* free HCD-private data associated with this URB */
 120
 121 static void urb_free_priv (urb_priv_t * urb)
 122 {
 123         int             i;
 124         int             last;
 125         struct td       * td;
 126
 127         last = urb->length - 1;
 128         if (last >= 0) {
 129                 for (i = 0; i <= last; i++) {
 130                         td = urb->td[i];
 131                         if (td) {
 132                                 td->usb_dev = NULL;
 133                                 urb->td[i] = NULL;
 134                         }
 135                 }
 136         }
 137 }
 138
 139 /*-------------------------------------------------------------------------*/
 140
 141 #ifdef DEBUG
 142 static int sohci_get_current_frame_number (struct usb_device * dev);
 143
 144 /* debug| print the main components of an URB
 145  * small: 0) header + data packets 1) just header */
 146
 147 static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
 148         int transfer_len, struct devrequest * setup, char * str, int small)
 149 {
 150         urb_priv_t * purb = &urb_priv;
 151
 152         dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
 153                         str,
 154                         sohci_get_current_frame_number (dev),
 155                         usb_pipedevice (pipe),
 156                         usb_pipeendpoint (pipe),
 157                         usb_pipeout (pipe)? 'O': 'I',
 158                         usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
 159                                 (usb_pipecontrol (pipe)? "CTRL": "BULK"),
 160                         purb->actual_length,
 161                         transfer_len, dev->status);
 162 #ifdef  OHCI_VERBOSE_DEBUG
 163         if (!small) {
 164                 int i, len;
 165
 166                 if (usb_pipecontrol (pipe)) {
 167                         printf (__FILE__ ": cmd(8):");
 168                         for (i = 0; i < 8 ; i++)
 169                                 printf (" %02x", ((__u8 *) setup) [i]);
 170                         printf ("\n");
 171                 }
 172                 if (transfer_len > 0 && buffer) {
 173                         printf (__FILE__ ": data(%d/%d):",
 174                                 purb->actual_length,
 175                                 transfer_len);
 176                         len = usb_pipeout (pipe)?
 177                                         transfer_len: purb->actual_length;
 178                         for (i = 0; i < 16 && i < len; i++)
 179                                 printf (" %02x", ((__u8 *) buffer) [i]);
 180                         printf ("%s\n", i < len? "...": "");
 181                 }
 182         }
 183 #endif
 184 }
 185
 186 /* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
 187 void ep_print_int_eds (ohci_t *ohci, char * str) {
 188         int i, j;
 189          __u32 * ed_p;
 190         for (i= 0; i < 32; i++) {
 191                 j = 5;
 192                 ed_p = &(ohci->hcca->int_table [i]);
 193                 if (*ed_p == 0)
 194                     continue;
 195                 printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
 196                 while (*ed_p != 0 && j--) {
 197                         ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
 198                         printf (" ed: %4x;", ed->hwINFO);
 199                         ed_p = &ed->hwNextED;
 200                 }
 201                 printf ("\n");
 202         }
 203 }
 204
 205 static void ohci_dump_intr_mask (char *label, __u32 mask)
 206 {
 207         dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
 208                 label,
 209                 mask,
 210                 (mask & OHCI_INTR_MIE) ? " MIE" : "",
 211                 (mask & OHCI_INTR_OC) ? " OC" : "",
 212                 (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
 213                 (mask & OHCI_INTR_FNO) ? " FNO" : "",
 214                 (mask & OHCI_INTR_UE) ? " UE" : "",
 215                 (mask & OHCI_INTR_RD) ? " RD" : "",
 216                 (mask & OHCI_INTR_SF) ? " SF" : "",
 217                 (mask & OHCI_INTR_WDH) ? " WDH" : "",
 218                 (mask & OHCI_INTR_SO) ? " SO" : ""
 219                 );
 220 }
 221
 222 static void maybe_print_eds (char *label, __u32 value)
 223 {
 224         ed_t *edp = (ed_t *)value;
 225
 226         if (value) {
 227                 dbg ("%s %08x", label, value);
 228                 dbg ("%08x", edp->hwINFO);
 229                 dbg ("%08x", edp->hwTailP);
 230                 dbg ("%08x", edp->hwHeadP);
 231                 dbg ("%08x", edp->hwNextED);
 232         }
 233 }
 234
 235 static char * hcfs2string (int state)
 236 {
 237         switch (state) {
 238                 case OHCI_USB_RESET:    return "reset";
 239                 case OHCI_USB_RESUME:   return "resume";
 240                 case OHCI_USB_OPER:     return "operational";
 241                 case OHCI_USB_SUSPEND:  return "suspend";
 242         }
 243         return "?";
 244 }
 245
 246 /* dump control and status registers */
 247 static void ohci_dump_status (ohci_t *controller)
 248 {
 249         struct ohci_regs        *regs = controller->regs;
 250         __u32                   temp;
 251
 252         temp = readl (&regs->revision) & 0xff;
 253         if (temp != 0x10)
 254                 dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
 255
 256         temp = readl (&regs->control);
 257         dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
 258                 (temp & OHCI_CTRL_RWE) ? " RWE" : "",
 259                 (temp & OHCI_CTRL_RWC) ? " RWC" : "",
 260                 (temp & OHCI_CTRL_IR) ? " IR" : "",
 261                 hcfs2string (temp & OHCI_CTRL_HCFS),
 262                 (temp & OHCI_CTRL_BLE) ? " BLE" : "",
 263                 (temp & OHCI_CTRL_CLE) ? " CLE" : "",
 264                 (temp & OHCI_CTRL_IE) ? " IE" : "",
 265                 (temp & OHCI_CTRL_PLE) ? " PLE" : "",
 266                 temp & OHCI_CTRL_CBSR
 267                 );
 268
 269         temp = readl (&regs->cmdstatus);
 270         dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
 271                 (temp & OHCI_SOC) >> 16,
 272                 (temp & OHCI_OCR) ? " OCR" : "",
 273                 (temp & OHCI_BLF) ? " BLF" : "",
 274                 (temp & OHCI_CLF) ? " CLF" : "",
 275                 (temp & OHCI_HCR) ? " HCR" : ""
 276                 );
 277
 278         ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
 279         ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
 280
 281         maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
 282
 283         maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
 284         maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
 285
 286         maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
 287         maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
 288
 289         maybe_print_eds ("donehead", readl (&regs->donehead));
 290 }
 291
 292 static void ohci_dump_roothub (ohci_t *controller, int verbose)
 293 {
 294         __u32                   temp, ndp, i;
 295
 296         temp = roothub_a (controller);
 297         ndp = (temp & RH_A_NDP);
 298
 299         if (verbose) {
 300                 dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
 301                         ((temp & RH_A_POTPGT) >> 24) & 0xff,
 302                         (temp & RH_A_NOCP) ? " NOCP" : "",
 303                         (temp & RH_A_OCPM) ? " OCPM" : "",
 304                         (temp & RH_A_DT) ? " DT" : "",
 305                         (temp & RH_A_NPS) ? " NPS" : "",
 306                         (temp & RH_A_PSM) ? " PSM" : "",
 307                         ndp
 308                         );
 309                 temp = roothub_b (controller);
 310                 dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
 311                         temp,
 312                         (temp & RH_B_PPCM) >> 16,
 313                         (temp & RH_B_DR)
 314                         );
 315                 temp = roothub_status (controller);
 316                 dbg ("roothub.status: %08x%s%s%s%s%s%s",
 317                         temp,
 318                         (temp & RH_HS_CRWE) ? " CRWE" : "",
 319                         (temp & RH_HS_OCIC) ? " OCIC" : "",
 320                         (temp & RH_HS_LPSC) ? " LPSC" : "",
 321                         (temp & RH_HS_DRWE) ? " DRWE" : "",
 322                         (temp & RH_HS_OCI) ? " OCI" : "",
 323                         (temp & RH_HS_LPS) ? " LPS" : ""
 324                         );
 325         }
 326
 327         for (i = 0; i < ndp; i++) {
 328                 temp = roothub_portstatus (controller, i);
 329                 dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
 330                         i,
 331                         temp,
 332                         (temp & RH_PS_PRSC) ? " PRSC" : "",
 333                         (temp & RH_PS_OCIC) ? " OCIC" : "",
 334                         (temp & RH_PS_PSSC) ? " PSSC" : "",
 335                         (temp & RH_PS_PESC) ? " PESC" : "",
 336                         (temp & RH_PS_CSC) ? " CSC" : "",
 337
 338                         (temp & RH_PS_LSDA) ? " LSDA" : "",
 339                         (temp & RH_PS_PPS) ? " PPS" : "",
 340                         (temp & RH_PS_PRS) ? " PRS" : "",
 341                         (temp & RH_PS_POCI) ? " POCI" : "",
 342                         (temp & RH_PS_PSS) ? " PSS" : "",
 343
 344                         (temp & RH_PS_PES) ? " PES" : "",
 345                         (temp & RH_PS_CCS) ? " CCS" : ""
 346                         );
 347         }
 348 }
 349
 350 static void ohci_dump (ohci_t *controller, int verbose)
 351 {
 352         dbg ("OHCI controller usb-%s state", controller->slot_name);
 353
 354         /* dumps some of the state we know about */
 355         ohci_dump_status (controller);
 356         if (verbose)
 357                 ep_print_int_eds (controller, "hcca");
 358         dbg ("hcca frame #%04x", controller->hcca->frame_no);
 359         ohci_dump_roothub (controller, 1);
 360 }
 361
 362
 363 #endif /* DEBUG */
 364
 365 /*-------------------------------------------------------------------------*
 366  * Interface functions (URB)
 367  *-------------------------------------------------------------------------*/
 368
 369 /* get a transfer request */
 370
 371 int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
 372                 int transfer_len, struct devrequest *setup, int interval)
 373 {
 374         ohci_t *ohci;
 375         ed_t * ed;
 376         urb_priv_t *purb_priv;
 377         int i, size = 0;
 378
 379         ohci = &gohci;
 380
 381         /* when controller's hung, permit only roothub cleanup attempts
 382          * such as powering down ports */
 383         if (ohci->disabled) {
 384                 err("sohci_submit_job: EPIPE");
 385                 return -1;
 386         }
 387
 388         /* if we have an unfinished URB from previous transaction let's
 389          * fail and scream as quickly as possible so as not to corrupt
 390          * further communication */
 391         if (!urb_finished) {
 392                 err("sohci_submit_job: URB NOT FINISHED");
 393                 return -1;
 394         }
 395         /* we're about to begin a new transaction here so mark the URB unfinished */
 396         urb_finished = 0;
 397
 398         /* every endpoint has a ed, locate and fill it */
 399         if (!(ed = ep_add_ed (dev, pipe))) {
 400                 err("sohci_submit_job: ENOMEM");
 401                 return -1;
 402         }
 403
 404         /* for the private part of the URB we need the number of TDs (size) */
 405         switch (usb_pipetype (pipe)) {
 406                 case PIPE_BULK: /* one TD for every 4096 Byte */
 407                         size = (transfer_len - 1) / 4096 + 1;
 408                         break;
 409                 case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
 410                         size = (transfer_len == 0)? 2:
 411                                                 (transfer_len - 1) / 4096 + 3;
 412                         break;
 413         }
 414
 415         if (size >= (N_URB_TD - 1)) {
 416                 err("need %d TDs, only have %d", size, N_URB_TD);
 417                 return -1;
 418         }
 419         purb_priv = &urb_priv;
 420         purb_priv->pipe = pipe;
 421
 422         /* fill the private part of the URB */
 423         purb_priv->length = size;
 424         purb_priv->ed = ed;
 425         purb_priv->actual_length = 0;
 426
 427         /* allocate the TDs */
 428         /* note that td[0] was allocated in ep_add_ed */
 429         for (i = 0; i < size; i++) {
 430                 purb_priv->td[i] = td_alloc (dev);
 431                 if (!purb_priv->td[i]) {
 432                         purb_priv->length = i;
 433                         urb_free_priv (purb_priv);
 434                         err("sohci_submit_job: ENOMEM");
 435                         return -1;
 436                 }
 437         }
 438
 439         if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
 440                 urb_free_priv (purb_priv);
 441                 err("sohci_submit_job: EINVAL");
 442                 return -1;
 443         }
 444
 445         /* link the ed into a chain if is not already */
 446         if (ed->state != ED_OPER)
 447                 ep_link (ohci, ed);
 448
 449         /* fill the TDs and link it to the ed */
 450         td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
 451
 452         return 0;
 453 }
 454
 455 /*-------------------------------------------------------------------------*/
 456
 457 #ifdef DEBUG
 458 /* tell us the current USB frame number */
 459
 460 static int sohci_get_current_frame_number (struct usb_device *usb_dev)
 461 {
 462         ohci_t *ohci = &gohci;
 463
 464         return ohci_cpu_to_le16 (ohci->hcca->frame_no);
 465 }
 466 #endif
 467
 468 /*-------------------------------------------------------------------------*
 469  * ED handling functions
 470  *-------------------------------------------------------------------------*/
 471
 472 /* link an ed into one of the HC chains */
 473
 474 static int ep_link (ohci_t *ohci, ed_t *edi)
 475 {
 476         volatile ed_t *ed = edi;
 477
 478         ed->state = ED_OPER;
 479
 480         switch (ed->type) {
 481         case PIPE_CONTROL:
 482                 ed->hwNextED = 0;
 483                 if (ohci->ed_controltail == NULL) {
 484                         writel (ed, &ohci->regs->ed_controlhead);
 485                 } else {
 486                         ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
 487                 }
 488                 ed->ed_prev = ohci->ed_controltail;
 489                 if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
 490                         !ohci->ed_rm_list[1] && !ohci->sleeping) {
 491                         ohci->hc_control |= OHCI_CTRL_CLE;
 492                         writel (ohci->hc_control, &ohci->regs->control);
 493                 }
 494                 ohci->ed_controltail = edi;
 495                 break;
 496
 497         case PIPE_BULK:
 498                 ed->hwNextED = 0;
 499                 if (ohci->ed_bulktail == NULL) {
 500                         writel (ed, &ohci->regs->ed_bulkhead);
 501                 } else {
 502                         ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
 503                 }
 504                 ed->ed_prev = ohci->ed_bulktail;
 505                 if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
 506                         !ohci->ed_rm_list[1] && !ohci->sleeping) {
 507                         ohci->hc_control |= OHCI_CTRL_BLE;
 508                         writel (ohci->hc_control, &ohci->regs->control);
 509                 }
 510                 ohci->ed_bulktail = edi;
 511                 break;
 512         }
 513         return 0;
 514 }
 515
 516 /*-------------------------------------------------------------------------*/
 517
 518 /* unlink an ed from one of the HC chains.
 519  * just the link to the ed is unlinked.
 520  * the link from the ed still points to another operational ed or 0
 521  * so the HC can eventually finish the processing of the unlinked ed */
 522
 523 static int ep_unlink (ohci_t *ohci, ed_t *edi)
 524 {
 525         volatile ed_t *ed = edi;
 526
 527         ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
 528
 529         switch (ed->type) {
 530         case PIPE_CONTROL:
 531                 if (ed->ed_prev == NULL) {
 532                         if (!ed->hwNextED) {
 533                                 ohci->hc_control &= ~OHCI_CTRL_CLE;
 534                                 writel (ohci->hc_control, &ohci->regs->control);
 535                         }
 536                         writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
 537                 } else {
 538                         ed->ed_prev->hwNextED = ed->hwNextED;
 539                 }
 540                 if (ohci->ed_controltail == ed) {
 541                         ohci->ed_controltail = ed->ed_prev;
 542                 } else {
 543                         ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
 544                 }
 545                 break;
 546
 547         case PIPE_BULK:
 548                 if (ed->ed_prev == NULL) {
 549                         if (!ed->hwNextED) {
 550                                 ohci->hc_control &= ~OHCI_CTRL_BLE;
 551                                 writel (ohci->hc_control, &ohci->regs->control);
 552                         }
 553                         writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
 554                 } else {
 555                         ed->ed_prev->hwNextED = ed->hwNextED;
 556                 }
 557                 if (ohci->ed_bulktail == ed) {
 558                         ohci->ed_bulktail = ed->ed_prev;
 559                 } else {
 560                         ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
 561                 }
 562                 break;
 563         }
 564         ed->state = ED_UNLINK;
 565         return 0;
 566 }
 567
 568
 569 /*-------------------------------------------------------------------------*/
 570
 571 /* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
 572  * but the USB stack is a little bit stateless  so we do it at every transaction
 573  * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
 574  * in all other cases the state is left unchanged
 575  * the ed info fields are setted anyway even though most of them should not change */
 576
 577 static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
 578 {
 579         td_t *td;
 580         ed_t *ed_ret;
 581         volatile ed_t *ed;
 582
 583         ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
 584                         (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
 585
 586         if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
 587                 err("ep_add_ed: pending delete");
 588                 /* pending delete request */
 589                 return NULL;
 590         }
 591
 592         if (ed->state == ED_NEW) {
 593                 ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
 594                 /* dummy td; end of td list for ed */
 595                 td = td_alloc (usb_dev);
 596                 ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
 597                 ed->hwHeadP = ed->hwTailP;
 598                 ed->state = ED_UNLINK;
 599                 ed->type = usb_pipetype (pipe);
 600                 ohci_dev.ed_cnt++;
 601         }
 602
 603         ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
 604                         | usb_pipeendpoint (pipe) << 7
 605                         | (usb_pipeisoc (pipe)? 0x8000: 0)
 606                         | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
 607                         | (usb_dev->speed == USB_SPEED_LOW) << 13
 608                         | usb_maxpacket (usb_dev, pipe) << 16);
 609
 610         return ed_ret;
 611 }
 612
 613 /*-------------------------------------------------------------------------*
 614  * TD handling functions
 615  *-------------------------------------------------------------------------*/
 616
 617 /* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
 618
 619 static void td_fill (ohci_t *ohci, unsigned int info,
 620         void *data, int len,
 621         struct usb_device *dev, int index, urb_priv_t *urb_priv)
 622 {
 623         volatile td_t  *td, *td_pt;
 624 #ifdef OHCI_FILL_TRACE
 625         int i;
 626 #endif
 627
 628         if (index > urb_priv->length) {
 629                 err("index > length");
 630                 return;
 631         }
 632         /* use this td as the next dummy */
 633         td_pt = urb_priv->td [index];
 634         td_pt->hwNextTD = 0;
 635
 636         /* fill the old dummy TD */
 637         td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
 638
 639         td->ed = urb_priv->ed;
 640         td->next_dl_td = NULL;
 641         td->index = index;
 642         td->data = (__u32)data;
 643 #ifdef OHCI_FILL_TRACE
 644         if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
 645                 for (i = 0; i < len; i++)
 646                 printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
 647                 printf("\n");
 648         }
 649 #endif
 650         if (!len)
 651                 data = 0;
 652
 653         td->hwINFO = ohci_cpu_to_le32 (info);
 654         td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
 655         if (data)
 656                 td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
 657         else
 658                 td->hwBE = 0;
 659         td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
 660
 661         /* append to queue */
 662         td->ed->hwTailP = td->hwNextTD;
 663 }
 664
 665 /*-------------------------------------------------------------------------*/
 666
 667 /* prepare all TDs of a transfer */
 668 static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
 669         int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
 670 {
 671         ohci_t *ohci = &gohci;
 672         int data_len = transfer_len;
 673         void *data;
 674         int cnt = 0;
 675         __u32 info = 0;
 676         unsigned int toggle = 0;
 677
 678         /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
 679         if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
 680                 toggle = TD_T_TOGGLE;
 681         } else {
 682                 toggle = TD_T_DATA0;
 683                 usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
 684         }
 685         urb->td_cnt = 0;
 686         if (data_len)
 687                 data = buffer;
 688         else
 689                 data = 0;
 690
 691         switch (usb_pipetype (pipe)) {
 692         case PIPE_BULK:
 693                 info = usb_pipeout (pipe)?
 694                         TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
 695                 while(data_len > 4096) {
 696                         td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
 697                         data += 4096; data_len -= 4096; cnt++;
 698                 }
 699                 info = usb_pipeout (pipe)?
 700                         TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
 701                 td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
 702                 cnt++;
 703
 704                 if (!ohci->sleeping)
 705                         writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
 706                 break;
 707
 708         case PIPE_CONTROL:
 709                 info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
 710                 td_fill (ohci, info, setup, 8, dev, cnt++, urb);
 711                 if (data_len > 0) {
 712                         info = usb_pipeout (pipe)?
 713                                 TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
 714                         /* NOTE:  mishandles transfers >8K, some >4K */
 715                         td_fill (ohci, info, data, data_len, dev, cnt++, urb);
 716                 }
 717                 info = usb_pipeout (pipe)?
 718                         TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
 719                 td_fill (ohci, info, data, 0, dev, cnt++, urb);
 720                 if (!ohci->sleeping)
 721                         writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
 722                 break;
 723         }
 724         if (urb->length != cnt)
 725                 dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
 726 }
 727
 728 /*-------------------------------------------------------------------------*
 729  * Done List handling functions
 730  *-------------------------------------------------------------------------*/
 731
 732
 733 /* calculate the transfer length and update the urb */
 734
 735 static void dl_transfer_length(td_t * td)
 736 {
 737         __u32 tdBE, tdCBP;
 738         urb_priv_t *lurb_priv = &urb_priv;
 739
 740         tdBE   = ohci_cpu_to_le32 (td->hwBE);
 741         tdCBP  = ohci_cpu_to_le32 (td->hwCBP);
 742
 743
 744         if (!(usb_pipecontrol(lurb_priv->pipe) &&
 745             ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
 746                 if (tdBE != 0) {
 747                         if (td->hwCBP == 0)
 748                                 lurb_priv->actual_length += tdBE - td->data + 1;
 749                         else
 750                                 lurb_priv->actual_length += tdCBP - td->data;
 751                 }
 752         }
 753 }
 754
 755 /*-------------------------------------------------------------------------*/
 756
 757 /* replies to the request have to be on a FIFO basis so
 758  * we reverse the reversed done-list */
 759
 760 static td_t * dl_reverse_done_list (ohci_t *ohci)
 761 {
 762         __u32 td_list_hc;
 763         td_t *td_rev = NULL;
 764         td_t *td_list = NULL;
 765         urb_priv_t *lurb_priv = NULL;
 766
 767         td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
 768         ohci->hcca->done_head = 0;
 769
 770         while (td_list_hc) {
 771                 td_list = (td_t *)td_list_hc;
 772
 773                 if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
 774                         lurb_priv = &urb_priv;
 775                         dbg(" USB-error/status: %x : %p",
 776                                         TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
 777                         if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
 778                                 if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
 779                                         td_list->ed->hwHeadP =
 780                                                 (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
 781                                                                         (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
 782                                         lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
 783                                 } else
 784                                         td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
 785                         }
 786 #ifdef CONFIG_MPC5200
 787                         td_list->hwNextTD = 0;
 788 #endif
 789                 }
 790
 791                 td_list->next_dl_td = td_rev;
 792                 td_rev = td_list;
 793                 td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
 794         }
 795         return td_list;
 796 }
 797
 798 /*-------------------------------------------------------------------------*/
 799
 800 /* td done list */
 801 static int dl_done_list (ohci_t *ohci, td_t *td_list)
 802 {
 803         td_t *td_list_next = NULL;
 804         ed_t *ed;
 805         int cc = 0;
 806         int stat = 0;
 807         /* urb_t *urb; */
 808         urb_priv_t *lurb_priv;
 809         __u32 tdINFO, edHeadP, edTailP;
 810
 811         while (td_list) {
 812                 td_list_next = td_list->next_dl_td;
 813
 814                 lurb_priv = &urb_priv;
 815                 tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
 816
 817                 ed = td_list->ed;
 818
 819                 dl_transfer_length(td_list);
 820
 821                 /* error code of transfer */
 822                 cc = TD_CC_GET (tdINFO);
 823                 if (++(lurb_priv->td_cnt) == lurb_priv->length) {
 824                         if ((ed->state & (ED_OPER | ED_UNLINK))
 825                                         && (lurb_priv->state != URB_DEL)) {
 826                                 dbg("ConditionCode %#x", cc);
 827                                 stat = cc_to_error[cc];
 828                                 urb_finished = 1;
 829                         }
 830                 }
 831
 832                 if (ed->state != ED_NEW) {
 833                         edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
 834                         edTailP = ohci_cpu_to_le32 (ed->hwTailP);
 835
 836                         /* unlink eds if they are not busy */
 837                         if ((edHeadP == edTailP) && (ed->state == ED_OPER))
 838                                 ep_unlink (ohci, ed);
 839                 }
 840
 841                 td_list = td_list_next;
 842         }
 843         return stat;
 844 }
 845
 846 /*-------------------------------------------------------------------------*
 847  * Virtual Root Hub
 848  *-------------------------------------------------------------------------*/
 849
 850 /* Device descriptor */
 851 static __u8 root_hub_dev_des[] =
 852 {
 853         0x12,       /*  __u8  bLength; */
 854         0x01,       /*  __u8  bDescriptorType; Device */
 855         0x10,       /*  __u16 bcdUSB; v1.1 */
 856         0x01,
 857         0x09,       /*  __u8  bDeviceClass; HUB_CLASSCODE */
 858         0x00,       /*  __u8  bDeviceSubClass; */
 859         0x00,       /*  __u8  bDeviceProtocol; */
 860         0x08,       /*  __u8  bMaxPacketSize0; 8 Bytes */
 861         0x00,       /*  __u16 idVendor; */
 862         0x00,
 863         0x00,       /*  __u16 idProduct; */
 864         0x00,
 865         0x00,       /*  __u16 bcdDevice; */
 866         0x00,
 867         0x00,       /*  __u8  iManufacturer; */
 868         0x01,       /*  __u8  iProduct; */
 869         0x00,       /*  __u8  iSerialNumber; */
 870         0x01        /*  __u8  bNumConfigurations; */
 871 };
 872
 873
 874 /* Configuration descriptor */
 875 static __u8 root_hub_config_des[] =
 876 {
 877         0x09,       /*  __u8  bLength; */
 878         0x02,       /*  __u8  bDescriptorType; Configuration */
 879         0x19,       /*  __u16 wTotalLength; */
 880         0x00,
 881         0x01,       /*  __u8  bNumInterfaces; */
 882         0x01,       /*  __u8  bConfigurationValue; */
 883         0x00,       /*  __u8  iConfiguration; */
 884         0x40,       /*  __u8  bmAttributes;
 885                  Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
 886         0x00,       /*  __u8  MaxPower; */
 887
 888         /* interface */
 889         0x09,       /*  __u8  if_bLength; */
 890         0x04,       /*  __u8  if_bDescriptorType; Interface */
 891         0x00,       /*  __u8  if_bInterfaceNumber; */
 892         0x00,       /*  __u8  if_bAlternateSetting; */
 893         0x01,       /*  __u8  if_bNumEndpoints; */
 894         0x09,       /*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
 895         0x00,       /*  __u8  if_bInterfaceSubClass; */
 896         0x00,       /*  __u8  if_bInterfaceProtocol; */
 897         0x00,       /*  __u8  if_iInterface; */
 898
 899         /* endpoint */
 900         0x07,       /*  __u8  ep_bLength; */
 901         0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
 902         0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
 903         0x03,       /*  __u8  ep_bmAttributes; Interrupt */
 904         0x02,       /*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
 905         0x00,
 906         0xff        /*  __u8  ep_bInterval; 255 ms */
 907 };
 908
 909 static unsigned char root_hub_str_index0[] =
 910 {
 911         0x04,                   /*  __u8  bLength; */
 912         0x03,                   /*  __u8  bDescriptorType; String-descriptor */
 913         0x09,                   /*  __u8  lang ID */
 914         0x04,                   /*  __u8  lang ID */
 915 };
 916
 917 static unsigned char root_hub_str_index1[] =
 918 {
 919         28,                     /*  __u8  bLength; */
 920         0x03,                   /*  __u8  bDescriptorType; String-descriptor */
 921         'O',                    /*  __u8  Unicode */
 922         0,                              /*  __u8  Unicode */
 923         'H',                    /*  __u8  Unicode */
 924         0,                              /*  __u8  Unicode */
 925         'C',                    /*  __u8  Unicode */
 926         0,                              /*  __u8  Unicode */
 927         'I',                    /*  __u8  Unicode */
 928         0,                              /*  __u8  Unicode */
 929         ' ',                    /*  __u8  Unicode */
 930         0,                              /*  __u8  Unicode */
 931         'R',                    /*  __u8  Unicode */
 932         0,                              /*  __u8  Unicode */
 933         'o',                    /*  __u8  Unicode */
 934         0,                              /*  __u8  Unicode */
 935         'o',                    /*  __u8  Unicode */
 936         0,                              /*  __u8  Unicode */
 937         't',                    /*  __u8  Unicode */
 938         0,                              /*  __u8  Unicode */
 939         ' ',                    /*  __u8  Unicode */
 940         0,                              /*  __u8  Unicode */
 941         'H',                    /*  __u8  Unicode */
 942         0,                              /*  __u8  Unicode */
 943         'u',                    /*  __u8  Unicode */
 944         0,                              /*  __u8  Unicode */
 945         'b',                    /*  __u8  Unicode */
 946         0,                              /*  __u8  Unicode */
 947 };
 948
 949 /* Hub class-specific descriptor is constructed dynamically */
 950
 951
 952 /*-------------------------------------------------------------------------*/
 953
 954 #define OK(x)                   len = (x); break
 955 #ifdef DEBUG
 956 #define WR_RH_STAT(x)           {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
 957 #define WR_RH_PORTSTAT(x)       {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
 958 #else
 959 #define WR_RH_STAT(x)           writel((x), &gohci.regs->roothub.status)
 960 #define WR_RH_PORTSTAT(x)       writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
 961 #endif
 962 #define RD_RH_STAT              roothub_status(&gohci)
 963 #define RD_RH_PORTSTAT          roothub_portstatus(&gohci,wIndex-1)
 964
 965 /* request to virtual root hub */
 966
 967 int rh_check_port_status(ohci_t *controller)
 968 {
 969         __u32 temp, ndp, i;
 970         int res;
 971
 972         res = -1;
 973         temp = roothub_a (controller);
 974         ndp = (temp & RH_A_NDP);
 975         for (i = 0; i < ndp; i++) {
 976                 temp = roothub_portstatus (controller, i);
 977                 /* check for a device disconnect */
 978                 if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
 979                         (RH_PS_PESC | RH_PS_CSC)) &&
 980                         ((temp & RH_PS_CCS) == 0)) {
 981                         res = i;
 982                         break;
 983                 }
 984         }
 985         return res;
 986 }
 987
 988 static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
 989                 void *buffer, int transfer_len, struct devrequest *cmd)
 990 {
 991         void * data = buffer;
 992         int leni = transfer_len;
 993         int len = 0;
 994         int stat = 0;
 995         __u32 datab[4];
 996         __u8 *data_buf = (__u8 *)datab;
 997         __u16 bmRType_bReq;
 998         __u16 wValue;
 999         __u16 wIndex;
1000         __u16 wLength;
1001
1002 #ifdef DEBUG
1003 urb_priv.actual_length = 0;
1004 pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
1005 #endif
1006         if (usb_pipeint(pipe)) {
1007                 info("Root-Hub submit IRQ: NOT implemented");
1008                 return 0;
1009         }
1010
1011         bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
1012         wValue        = m16_swap (cmd->value);
1013         wIndex        = m16_swap (cmd->index);
1014         wLength       = m16_swap (cmd->length);
1015
1016         info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
1017                 dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
1018
1019         switch (bmRType_bReq) {
1020         /* Request Destination:
1021            without flags: Device,
1022            RH_INTERFACE: interface,
1023            RH_ENDPOINT: endpoint,
1024            RH_CLASS means HUB here,
1025            RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
1026         */
1027
1028         case RH_GET_STATUS:
1029                         *(__u16 *) data_buf = m16_swap (1); OK (2);
1030         case RH_GET_STATUS | RH_INTERFACE:
1031                         *(__u16 *) data_buf = m16_swap (0); OK (2);
1032         case RH_GET_STATUS | RH_ENDPOINT:
1033                         *(__u16 *) data_buf = m16_swap (0); OK (2);
1034         case RH_GET_STATUS | RH_CLASS:
1035                         *(__u32 *) data_buf = m32_swap (
1036                                 RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
1037                         OK (4);
1038         case RH_GET_STATUS | RH_OTHER | RH_CLASS:
1039                         *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
1040
1041         case RH_CLEAR_FEATURE | RH_ENDPOINT:
1042                 switch (wValue) {
1043                         case (RH_ENDPOINT_STALL): OK (0);
1044                 }
1045                 break;
1046
1047         case RH_CLEAR_FEATURE | RH_CLASS:
1048                 switch (wValue) {
1049                         case RH_C_HUB_LOCAL_POWER:
1050                                 OK(0);
1051                         case (RH_C_HUB_OVER_CURRENT):
1052                                         WR_RH_STAT(RH_HS_OCIC); OK (0);
1053                 }
1054                 break;
1055
1056         case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
1057                 switch (wValue) {
1058                         case (RH_PORT_ENABLE):
1059                                         WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
1060                         case (RH_PORT_SUSPEND):
1061                                         WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
1062                         case (RH_PORT_POWER):
1063                                         WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
1064                         case (RH_C_PORT_CONNECTION):
1065                                         WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
1066                         case (RH_C_PORT_ENABLE):
1067                                         WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
1068                         case (RH_C_PORT_SUSPEND):
1069                                         WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
1070                         case (RH_C_PORT_OVER_CURRENT):
1071                                         WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
1072                         case (RH_C_PORT_RESET):
1073                                         WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
1074                 }
1075                 break;
1076
1077         case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
1078                 switch (wValue) {
1079                         case (RH_PORT_SUSPEND):
1080                                         WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
1081                         case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
1082                                         if (RD_RH_PORTSTAT & RH_PS_CCS)
1083                                             WR_RH_PORTSTAT (RH_PS_PRS);
1084                                         OK (0);
1085                         case (RH_PORT_POWER):
1086                                         WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
1087                         case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
1088                                         if (RD_RH_PORTSTAT & RH_PS_CCS)
1089                                             WR_RH_PORTSTAT (RH_PS_PES );
1090                                         OK (0);
1091                 }
1092                 break;
1093
1094         case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
1095
1096         case RH_GET_DESCRIPTOR:
1097                 switch ((wValue & 0xff00) >> 8) {
1098                         case (0x01): /* device descriptor */
1099                                 len = min_t(unsigned int,
1100                                           leni,
1101                                           min_t(unsigned int,
1102                                               sizeof (root_hub_dev_des),
1103                                               wLength));
1104                                 data_buf = root_hub_dev_des; OK(len);
1105                         case (0x02): /* configuration descriptor */
1106                                 len = min_t(unsigned int,
1107                                           leni,
1108                                           min_t(unsigned int,
1109                                               sizeof (root_hub_config_des),
1110                                               wLength));
1111                                 data_buf = root_hub_config_des; OK(len);
1112                         case (0x03): /* string descriptors */
1113                                 if(wValue==0x0300) {
1114                                         len = min_t(unsigned int,
1115                                                   leni,
1116                                                   min_t(unsigned int,
1117                                                       sizeof (root_hub_str_index0),
1118                                                       wLength));
1119                                         data_buf = root_hub_str_index0;
1120                                         OK(len);
1121                                 }
1122                                 if(wValue==0x0301) {
1123                                         len = min_t(unsigned int,
1124                                                   leni,
1125                                                   min_t(unsigned int,
1126                                                       sizeof (root_hub_str_index1),
1127                                                       wLength));
1128                                         data_buf = root_hub_str_index1;
1129                                         OK(len);
1130                         }
1131                         default:
1132                                 stat = USB_ST_STALLED;
1133                 }
1134                 break;
1135
1136         case RH_GET_DESCRIPTOR | RH_CLASS:
1137             {
1138                     __u32 temp = roothub_a (&gohci);
1139
1140                     data_buf [0] = 9;           /* min length; */
1141                     data_buf [1] = 0x29;
1142                     data_buf [2] = temp & RH_A_NDP;
1143                     data_buf [3] = 0;
1144                     if (temp & RH_A_PSM)        /* per-port power switching? */
1145                         data_buf [3] |= 0x1;
1146                     if (temp & RH_A_NOCP)       /* no overcurrent reporting? */
1147                         data_buf [3] |= 0x10;
1148                     else if (temp & RH_A_OCPM)  /* per-port overcurrent reporting? */
1149                         data_buf [3] |= 0x8;
1150
1151                     /* corresponds to data_buf[4-7] */
1152                     datab [1] = 0;
1153                     data_buf [5] = (temp & RH_A_POTPGT) >> 24;
1154                     temp = roothub_b (&gohci);
1155                     data_buf [7] = temp & RH_B_DR;
1156                     if (data_buf [2] < 7) {
1157                         data_buf [8] = 0xff;
1158                     } else {
1159                         data_buf [0] += 2;
1160                         data_buf [8] = (temp & RH_B_DR) >> 8;
1161                         data_buf [10] = data_buf [9] = 0xff;
1162                     }
1163
1164                     len = min_t(unsigned int, leni,
1165                               min_t(unsigned int, data_buf [0], wLength));
1166                     OK (len);
1167                 }
1168
1169         case RH_GET_CONFIGURATION:      *(__u8 *) data_buf = 0x01; OK (1);
1170
1171         case RH_SET_CONFIGURATION:      WR_RH_STAT (0x10000); OK (0);
1172
1173         default:
1174                 dbg ("unsupported root hub command");
1175                 stat = USB_ST_STALLED;
1176         }
1177
1178 #ifdef  DEBUG
1179         ohci_dump_roothub (&gohci, 1);
1180 #endif
1181
1182         len = min_t(int, len, leni);
1183         if (data != data_buf)
1184             memcpy (data, data_buf, len);
1185         dev->act_len = len;
1186         dev->status = stat;
1187
1188 #ifdef DEBUG
1189         if (transfer_len)
1190                 urb_priv.actual_length = transfer_len;
1191         pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
1192 #endif
1193
1194         return stat;
1195 }
1196
1197 /*-------------------------------------------------------------------------*/
1198
1199 /* common code for handling submit messages - used for all but root hub */
1200 /* accesses. */
1201 int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1202                 int transfer_len, struct devrequest *setup, int interval)
1203 {
1204         int stat = 0;
1205         int maxsize = usb_maxpacket(dev, pipe);
1206         int timeout;
1207
1208         /* device pulled? Shortcut the action. */
1209         if (devgone == dev) {
1210                 dev->status = USB_ST_CRC_ERR;
1211                 return 0;
1212         }
1213
1214 #ifdef DEBUG
1215         urb_priv.actual_length = 0;
1216         pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
1217 #endif
1218         if (!maxsize) {
1219                 err("submit_common_message: pipesize for pipe %lx is zero",
1220                         pipe);
1221                 return -1;
1222         }
1223
1224         if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
1225                 err("sohci_submit_job failed");
1226                 return -1;
1227         }
1228
1229         /* allow more time for a BULK device to react - some are slow */
1230 #define BULK_TO  5000   /* timeout in milliseconds */
1231         if (usb_pipebulk(pipe))
1232                 timeout = BULK_TO;
1233         else
1234                 timeout = 100;
1235
1236         /* wait for it to complete */
1237         for (;;) {
1238                 /* check whether the controller is done */
1239                 stat = hc_interrupt();
1240                 if (stat < 0) {
1241                         stat = USB_ST_CRC_ERR;
1242                         break;
1243                 }
1244
1245                 /* NOTE: since we are not interrupt driven in U-Boot and always
1246                  * handle only one URB at a time, we cannot assume the
1247                  * transaction finished on the first successful return from
1248                  * hc_interrupt().. unless the flag for current URB is set,
1249                  * meaning that all TD's to/from device got actually
1250                  * transferred and processed. If the current URB is not
1251                  * finished we need to re-iterate this loop so as
1252                  * hc_interrupt() gets called again as there needs to be some
1253                  * more TD's to process still */
1254                 if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
1255                         /* 0xff is returned for an SF-interrupt */
1256                         break;
1257                 }
1258
1259                 if (--timeout) {
1260                         mdelay(1);
1261                         if (!urb_finished)
1262                                 dbg("\%");
1263
1264                 } else {
1265                         err("CTL:TIMEOUT ");
1266                         dbg("submit_common_msg: TO status %x\n", stat);
1267                         stat = USB_ST_CRC_ERR;
1268                         urb_finished = 1;
1269                         break;
1270                 }
1271         }
1272 #if 0
1273         /* we got an Root Hub Status Change interrupt */
1274         if (got_rhsc) {
1275 #ifdef DEBUG
1276                 ohci_dump_roothub (&gohci, 1);
1277 #endif
1278                 got_rhsc = 0;
1279                 /* abuse timeout */
1280                 timeout = rh_check_port_status(&gohci);
1281                 if (timeout >= 0) {
1282 #if 0 /* this does nothing useful, but leave it here in case that changes */
1283                         /* the called routine adds 1 to the passed value */
1284                         usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
1285 #endif
1286                         /*
1287                          * XXX
1288                          * This is potentially dangerous because it assumes
1289                          * that only one device is ever plugged in!
1290                          */
1291                         devgone = dev;
1292                 }
1293         }
1294 #endif
1295
1296         dev->status = stat;
1297         dev->act_len = transfer_len;
1298
1299 #ifdef DEBUG
1300         pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
1301 #endif
1302
1303         /* free TDs in urb_priv */
1304         urb_free_priv (&urb_priv);
1305         return 0;
1306 }
1307
1308 /* submit routines called from usb.c */
1309 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1310                 int transfer_len)
1311 {
1312         info("submit_bulk_msg");
1313         return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
1314 }
1315
1316 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1317                 int transfer_len, struct devrequest *setup)
1318 {
1319         int maxsize = usb_maxpacket(dev, pipe);
1320
1321         info("submit_control_msg");
1322 #ifdef DEBUG
1323         urb_priv.actual_length = 0;
1324         pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
1325 #endif
1326         if (!maxsize) {
1327                 err("submit_control_message: pipesize for pipe %lx is zero",
1328                         pipe);
1329                 return -1;
1330         }
1331         if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
1332                 gohci.rh.dev = dev;
1333                 /* root hub - redirect */
1334                 return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
1335                         setup);
1336         }
1337
1338         return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
1339 }
1340
1341 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1342                 int transfer_len, int interval)
1343 {
1344         info("submit_int_msg");
1345         return -1;
1346 }
1347
1348 /*-------------------------------------------------------------------------*
1349  * HC functions
1350  *-------------------------------------------------------------------------*/
1351
1352 /* reset the HC and BUS */
1353
1354 static int hc_reset (ohci_t *ohci)
1355 {
1356         int timeout = 30;
1357         int smm_timeout = 50; /* 0,5 sec */
1358
1359         if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
1360                 writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
1361                 info("USB HC TakeOver from SMM");
1362                 while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
1363                         mdelay (10);
1364                         if (--smm_timeout == 0) {
1365                                 err("USB HC TakeOver failed!");
1366                                 return -1;
1367                         }
1368                 }
1369         }
1370
1371         /* Disable HC interrupts */
1372         writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
1373
1374         dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
1375                 ohci->slot_name,
1376                 readl (&ohci->regs->control));
1377
1378         /* Reset USB (needed by some controllers) */
1379         ohci->hc_control = 0;
1380         writel (ohci->hc_control, &ohci->regs->control);
1381
1382         /* HC Reset requires max 10 us delay */
1383         writel (OHCI_HCR,  &ohci->regs->cmdstatus);
1384         while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
1385                 if (--timeout == 0) {
1386                         err("USB HC reset timed out!");
1387                         return -1;
1388                 }
1389                 udelay (1);
1390         }
1391         return 0;
1392 }
1393
1394 /*-------------------------------------------------------------------------*/
1395
1396 /* Start an OHCI controller, set the BUS operational
1397  * enable interrupts
1398  * connect the virtual root hub */
1399
1400 static int hc_start (ohci_t * ohci)
1401 {
1402         __u32 mask;
1403         unsigned int fminterval;
1404
1405         ohci->disabled = 1;
1406
1407         /* Tell the controller where the control and bulk lists are
1408          * The lists are empty now. */
1409
1410         writel (0, &ohci->regs->ed_controlhead);
1411         writel (0, &ohci->regs->ed_bulkhead);
1412
1413         writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
1414
1415         fminterval = 0x2edf;
1416         writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
1417         fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
1418         writel (fminterval, &ohci->regs->fminterval);
1419         writel (0x628, &ohci->regs->lsthresh);
1420
1421         /* start controller operations */
1422         ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
1423         ohci->disabled = 0;
1424         writel (ohci->hc_control, &ohci->regs->control);
1425
1426         /* disable all interrupts */
1427         mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
1428                         OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
1429                         OHCI_INTR_OC | OHCI_INTR_MIE);
1430         writel (mask, &ohci->regs->intrdisable);
1431         /* clear all interrupts */
1432         mask &= ~OHCI_INTR_MIE;
1433         writel (mask, &ohci->regs->intrstatus);
1434         /* Choose the interrupts we care about now  - but w/o MIE */
1435         mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
1436         writel (mask, &ohci->regs->intrenable);
1437
1438 #ifdef  OHCI_USE_NPS
1439         /* required for AMD-756 and some Mac platforms */
1440         writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
1441                 &ohci->regs->roothub.a);
1442         writel (RH_HS_LPSC, &ohci->regs->roothub.status);
1443 #endif  /* OHCI_USE_NPS */
1444
1445         /* POTPGT delay is bits 24-31, in 2 ms units. */
1446         mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
1447
1448         /* connect the virtual root hub */
1449         ohci->rh.devnum = 0;
1450
1451         return 0;
1452 }
1453
1454 /*-------------------------------------------------------------------------*/
1455
1456 /* an interrupt happens */
1457
1458 static int
1459 hc_interrupt (void)
1460 {
1461         ohci_t *ohci = &gohci;
1462         struct ohci_regs *regs = ohci->regs;
1463         int ints;
1464         int stat = -1;
1465
1466         if ((ohci->hcca->done_head != 0) &&
1467              !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
1468
1469                 ints =  OHCI_INTR_WDH;
1470
1471         } else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
1472                 ohci->disabled++;
1473                 err ("%s device removed!", ohci->slot_name);
1474                 return -1;
1475
1476         } else if ((ints &= readl (&regs->intrenable)) == 0) {
1477                 dbg("hc_interrupt: returning..\n");
1478                 return 0xff;
1479         }
1480
1481         /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
1482
1483         if (ints & OHCI_INTR_RHSC) {
1484                 got_rhsc = 1;
1485                 stat = 0xff;
1486         }
1487
1488         if (ints & OHCI_INTR_UE) {
1489                 ohci->disabled++;
1490                 err ("OHCI Unrecoverable Error, controller usb-%s disabled",
1491                         ohci->slot_name);
1492                 /* e.g. due to PCI Master/Target Abort */
1493
1494 #ifdef  DEBUG
1495                 ohci_dump (ohci, 1);
1496 #endif
1497                 /* FIXME: be optimistic, hope that bug won't repeat often. */
1498                 /* Make some non-interrupt context restart the controller. */
1499                 /* Count and limit the retries though; either hardware or */
1500                 /* software errors can go forever... */
1501                 hc_reset (ohci);
1502                 return -1;
1503         }
1504
1505         if (ints & OHCI_INTR_WDH) {
1506                 writel (OHCI_INTR_WDH, &regs->intrdisable);
1507                 stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
1508                 writel (OHCI_INTR_WDH, &regs->intrenable);
1509         }
1510
1511         if (ints & OHCI_INTR_SO) {
1512                 dbg("USB Schedule overrun\n");
1513                 writel (OHCI_INTR_SO, &regs->intrenable);
1514                 stat = -1;
1515         }
1516
1517         /* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
1518         if (ints & OHCI_INTR_SF) {
1519                 unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
1520                 mdelay(1);
1521                 writel (OHCI_INTR_SF, &regs->intrdisable);
1522                 if (ohci->ed_rm_list[frame] != NULL)
1523                         writel (OHCI_INTR_SF, &regs->intrenable);
1524                 stat = 0xff;
1525         }
1526
1527         writel (ints, &regs->intrstatus);
1528         return stat;
1529 }
1530
1531 /*-------------------------------------------------------------------------*/
1532
1533 /*-------------------------------------------------------------------------*/
1534
1535 /* De-allocate all resources.. */
1536
1537 static void hc_release_ohci (ohci_t *ohci)
1538 {
1539         dbg ("USB HC release ohci usb-%s", ohci->slot_name);
1540
1541         if (!ohci->disabled)
1542                 hc_reset (ohci);
1543 }
1544
1545 /*-------------------------------------------------------------------------*/
1546
1547 /*
1548  * low level initalisation routine, called from usb.c
1549  */
1550 static char ohci_inited = 0;
1551
1552 int usb_lowlevel_init(int index, void **controller)
1553 {
1554         memset (&gohci, 0, sizeof (ohci_t));
1555         memset (&urb_priv, 0, sizeof (urb_priv_t));
1556
1557         /* align the storage */
1558         if ((__u32)&ghcca[0] & 0xff) {
1559                 err("HCCA not aligned!!");
1560                 return -1;
1561         }
1562         phcca = &ghcca[0];
1563         info("aligned ghcca %p", phcca);
1564         memset(&ohci_dev, 0, sizeof(struct ohci_device));
1565         if ((__u32)&ohci_dev.ed[0] & 0x7) {
1566                 err("EDs not aligned!!");
1567                 return -1;
1568         }
1569         memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
1570         if ((__u32)gtd & 0x7) {
1571                 err("TDs not aligned!!");
1572                 return -1;
1573         }
1574         ptd = gtd;
1575         gohci.hcca = phcca;
1576         memset (phcca, 0, sizeof (struct ohci_hcca));
1577
1578         gohci.disabled = 1;
1579         gohci.sleeping = 0;
1580         gohci.irq = -1;
1581 #if defined(CONFIG_440EP)
1582         gohci.regs = (struct ohci_regs *)(CONFIG_SYS_PERIPHERAL_BASE | 0x1000);
1583 #elif defined(CONFIG_440EPX) || defined(CONFIG_SYS_USB_HOST)
1584         gohci.regs = (struct ohci_regs *)(CONFIG_SYS_USB_HOST);
1585 #endif
1586
1587         gohci.flags = 0;
1588         gohci.slot_name = "ppc440";
1589
1590         if (hc_reset (&gohci) < 0) {
1591                 hc_release_ohci (&gohci);
1592                 return -1;
1593         }
1594
1595         if (hc_start (&gohci) < 0) {
1596                 err ("can't start usb-%s", gohci.slot_name);
1597                 hc_release_ohci (&gohci);
1598                 return -1;
1599         }
1600
1601 #ifdef  DEBUG
1602         ohci_dump (&gohci, 1);
1603 #endif
1604         ohci_inited = 1;
1605         urb_finished = 1;
1606
1607         return 0;
1608 }
1609
1610 int usb_lowlevel_stop(int index)
1611 {
1612         /* this gets called really early - before the controller has */
1613         /* even been initialized! */
1614         if (!ohci_inited)
1615                 return 0;
1616         /* TODO release any interrupts, etc. */
1617         /* call hc_release_ohci() here ? */
1618         hc_reset (&gohci);
1619         return 0;
1620 }
1621
1622 #endif /* CONFIG_USB_OHCI */