arch/ppc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c

   1 /*
   2  * Copyright 2008 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License
   6  * Version 2 as published by the Free Software Foundation.
   7  */
   8
   9 #include <common.h>
  10 #include <asm/fsl_ddr_sdram.h>
  11
  12 #include "ddr.h"
  13
  14 unsigned int
  15 compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
  16                          common_timing_params_t *outpdimm,
  17                          unsigned int number_of_dimms)
  18 {
  19         unsigned int i;
  20         unsigned int tAAmin_ps = 0;
  21         unsigned int tCKmin_X_ps = 0;
  22         unsigned int common_caslat;
  23         unsigned int caslat_actual;
  24         unsigned int retry = 16;
  25         unsigned int tmp;
  26         const unsigned int mclk_ps = get_memory_clk_period_ps();
  27
  28         /* compute the common CAS latency supported between slots */
  29         tmp = dimm_params[0].caslat_X;
  30         for (i = 1; i < number_of_dimms; i++)
  31                  tmp &= dimm_params[i].caslat_X;
  32         common_caslat = tmp;
  33
  34         /* compute the max tAAmin tCKmin between slots */
  35         for (i = 0; i < number_of_dimms; i++) {
  36                 tAAmin_ps = max(tAAmin_ps, dimm_params[i].tAA_ps);
  37                 tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
  38         }
  39         /* validate if the memory clk is in the range of dimms */
  40         if (mclk_ps < tCKmin_X_ps) {
  41                 printf("The DIMM max tCKmin is %d ps,"
  42                         "doesn't support the MCLK cycle %d ps\n",
  43                         tCKmin_X_ps, mclk_ps);
  44                 return 1;
  45         }
  46         /* determine the acutal cas latency */
  47         caslat_actual = (tAAmin_ps + mclk_ps - 1) / mclk_ps;
  48         /* check if the dimms support the CAS latency */
  49         while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
  50                 caslat_actual++;
  51                 retry--;
  52         }
  53         /* once the caculation of caslat_actual is completed
  54          * we must verify that this CAS latency value does not
  55          * exceed tAAmax, which is 20 ns for all DDR3 speed grades
  56          */
  57         if (caslat_actual * mclk_ps > 20000) {
  58                 printf("The choosen cas latency %d is too large\n",
  59                         caslat_actual);
  60                 return 1;
  61         }
  62         outpdimm->lowest_common_SPD_caslat = caslat_actual;
  63
  64         return 0;
  65 }
  66
  67 /*
  68  * compute_lowest_common_dimm_parameters()
  69  *
  70  * Determine the worst-case DIMM timing parameters from the set of DIMMs
  71  * whose parameters have been computed into the array pointed to
  72  * by dimm_params.
  73  */
  74 unsigned int
  75 compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
  76                                       common_timing_params_t *outpdimm,
  77                                       unsigned int number_of_dimms)
  78 {
  79         unsigned int i;
  80
  81         unsigned int tCKmin_X_ps = 0;
  82         unsigned int tCKmax_ps = 0xFFFFFFFF;
  83         unsigned int tCKmax_max_ps = 0;
  84         unsigned int tRCD_ps = 0;
  85         unsigned int tRP_ps = 0;
  86         unsigned int tRAS_ps = 0;
  87         unsigned int tWR_ps = 0;
  88         unsigned int tWTR_ps = 0;
  89         unsigned int tRFC_ps = 0;
  90         unsigned int tRRD_ps = 0;
  91         unsigned int tRC_ps = 0;
  92         unsigned int refresh_rate_ps = 0;
  93         unsigned int tIS_ps = 0;
  94         unsigned int tIH_ps = 0;
  95         unsigned int tDS_ps = 0;
  96         unsigned int tDH_ps = 0;
  97         unsigned int tRTP_ps = 0;
  98         unsigned int tDQSQ_max_ps = 0;
  99         unsigned int tQHS_ps = 0;
 100
 101         unsigned int temp1, temp2;
 102         unsigned int additive_latency = 0;
 103 #if !defined(CONFIG_FSL_DDR3)
 104         const unsigned int mclk_ps = get_memory_clk_period_ps();
 105         unsigned int lowest_good_caslat;
 106         unsigned int not_ok;
 107
 108         debug("using mclk_ps = %u\n", mclk_ps);
 109 #endif
 110
 111         temp1 = 0;
 112         for (i = 0; i < number_of_dimms; i++) {
 113                 /*
 114                  * If there are no ranks on this DIMM,
 115                  * it probably doesn't exist, so skip it.
 116                  */
 117                 if (dimm_params[i].n_ranks == 0) {
 118                         temp1++;
 119                         continue;
 120                 }
 121
 122                 /*
 123                  * Find minimum tCKmax_ps to find fastest slow speed,
 124                  * i.e., this is the slowest the whole system can go.
 125                  */
 126                 tCKmax_ps = min(tCKmax_ps, dimm_params[i].tCKmax_ps);
 127
 128                 /* Either find maximum value to determine slowest
 129                  * speed, delay, time, period, etc */
 130                 tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
 131                 tCKmax_max_ps = max(tCKmax_max_ps, dimm_params[i].tCKmax_ps);
 132                 tRCD_ps = max(tRCD_ps, dimm_params[i].tRCD_ps);
 133                 tRP_ps = max(tRP_ps, dimm_params[i].tRP_ps);
 134                 tRAS_ps = max(tRAS_ps, dimm_params[i].tRAS_ps);
 135                 tWR_ps = max(tWR_ps, dimm_params[i].tWR_ps);
 136                 tWTR_ps = max(tWTR_ps, dimm_params[i].tWTR_ps);
 137                 tRFC_ps = max(tRFC_ps, dimm_params[i].tRFC_ps);
 138                 tRRD_ps = max(tRRD_ps, dimm_params[i].tRRD_ps);
 139                 tRC_ps = max(tRC_ps, dimm_params[i].tRC_ps);
 140                 tIS_ps = max(tIS_ps, dimm_params[i].tIS_ps);
 141                 tIH_ps = max(tIH_ps, dimm_params[i].tIH_ps);
 142                 tDS_ps = max(tDS_ps, dimm_params[i].tDS_ps);
 143                 tDH_ps = max(tDH_ps, dimm_params[i].tDH_ps);
 144                 tRTP_ps = max(tRTP_ps, dimm_params[i].tRTP_ps);
 145                 tQHS_ps = max(tQHS_ps, dimm_params[i].tQHS_ps);
 146                 refresh_rate_ps = max(refresh_rate_ps,
 147                                       dimm_params[i].refresh_rate_ps);
 148
 149                 /*
 150                  * Find maximum tDQSQ_max_ps to find slowest.
 151                  *
 152                  * FIXME: is finding the slowest value the correct
 153                  * strategy for this parameter?
 154                  */
 155                 tDQSQ_max_ps = max(tDQSQ_max_ps, dimm_params[i].tDQSQ_max_ps);
 156         }
 157
 158         outpdimm->ndimms_present = number_of_dimms - temp1;
 159
 160         if (temp1 == number_of_dimms) {
 161                 debug("no dimms this memory controller\n");
 162                 return 0;
 163         }
 164
 165         outpdimm->tCKmin_X_ps = tCKmin_X_ps;
 166         outpdimm->tCKmax_ps = tCKmax_ps;
 167         outpdimm->tCKmax_max_ps = tCKmax_max_ps;
 168         outpdimm->tRCD_ps = tRCD_ps;
 169         outpdimm->tRP_ps = tRP_ps;
 170         outpdimm->tRAS_ps = tRAS_ps;
 171         outpdimm->tWR_ps = tWR_ps;
 172         outpdimm->tWTR_ps = tWTR_ps;
 173         outpdimm->tRFC_ps = tRFC_ps;
 174         outpdimm->tRRD_ps = tRRD_ps;
 175         outpdimm->tRC_ps = tRC_ps;
 176         outpdimm->refresh_rate_ps = refresh_rate_ps;
 177         outpdimm->tIS_ps = tIS_ps;
 178         outpdimm->tIH_ps = tIH_ps;
 179         outpdimm->tDS_ps = tDS_ps;
 180         outpdimm->tDH_ps = tDH_ps;
 181         outpdimm->tRTP_ps = tRTP_ps;
 182         outpdimm->tDQSQ_max_ps = tDQSQ_max_ps;
 183         outpdimm->tQHS_ps = tQHS_ps;
 184
 185         /* Determine common burst length for all DIMMs. */
 186         temp1 = 0xff;
 187         for (i = 0; i < number_of_dimms; i++) {
 188                 if (dimm_params[i].n_ranks) {
 189                         temp1 &= dimm_params[i].burst_lengths_bitmask;
 190                 }
 191         }
 192         outpdimm->all_DIMMs_burst_lengths_bitmask = temp1;
 193
 194         /* Determine if all DIMMs registered buffered. */
 195         temp1 = temp2 = 0;
 196         for (i = 0; i < number_of_dimms; i++) {
 197                 if (dimm_params[i].n_ranks) {
 198                         if (dimm_params[i].registered_dimm)
 199                                 temp1 = 1;
 200                         if (!dimm_params[i].registered_dimm)
 201                                 temp2 = 1;
 202                 }
 203         }
 204
 205         outpdimm->all_DIMMs_registered = 0;
 206         if (temp1 && !temp2) {
 207                 outpdimm->all_DIMMs_registered = 1;
 208         }
 209
 210         outpdimm->all_DIMMs_unbuffered = 0;
 211         if (!temp1 && temp2) {
 212                 outpdimm->all_DIMMs_unbuffered = 1;
 213         }
 214
 215         /* CHECKME: */
 216         if (!outpdimm->all_DIMMs_registered
 217             && !outpdimm->all_DIMMs_unbuffered) {
 218                 printf("ERROR:  Mix of registered buffered and unbuffered "
 219                                 "DIMMs detected!\n");
 220         }
 221
 222 #if defined(CONFIG_FSL_DDR3)
 223         if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms))
 224                 return 1;
 225 #else
 226         /*
 227          * Compute a CAS latency suitable for all DIMMs
 228          *
 229          * Strategy for SPD-defined latencies: compute only
 230          * CAS latency defined by all DIMMs.
 231          */
 232
 233         /*
 234          * Step 1: find CAS latency common to all DIMMs using bitwise
 235          * operation.
 236          */
 237         temp1 = 0xFF;
 238         for (i = 0; i < number_of_dimms; i++) {
 239                 if (dimm_params[i].n_ranks) {
 240                         temp2 = 0;
 241                         temp2 |= 1 << dimm_params[i].caslat_X;
 242                         temp2 |= 1 << dimm_params[i].caslat_X_minus_1;
 243                         temp2 |= 1 << dimm_params[i].caslat_X_minus_2;
 244                         /*
 245                          * FIXME: If there was no entry for X-2 (X-1) in
 246                          * the SPD, then caslat_X_minus_2
 247                          * (caslat_X_minus_1) contains either 255 or
 248                          * 0xFFFFFFFF because that's what the glorious
 249                          * __ilog2 function returns for an input of 0.
 250                          * On 32-bit PowerPC, left shift counts with bit
 251                          * 26 set (that the value of 255 or 0xFFFFFFFF
 252                          * will have), cause the destination register to
 253                          * be 0.  That is why this works.
 254                          */
 255                         temp1 &= temp2;
 256                 }
 257         }
 258
 259         /*
 260          * Step 2: check each common CAS latency against tCK of each
 261          * DIMM's SPD.
 262          */
 263         lowest_good_caslat = 0;
 264         temp2 = 0;
 265         while (temp1) {
 266                 not_ok = 0;
 267                 temp2 =  __ilog2(temp1);
 268                 debug("checking common caslat = %u\n", temp2);
 269
 270                 /* Check if this CAS latency will work on all DIMMs at tCK. */
 271                 for (i = 0; i < number_of_dimms; i++) {
 272                         if (!dimm_params[i].n_ranks) {
 273                                 continue;
 274                         }
 275                         if (dimm_params[i].caslat_X == temp2) {
 276                                 if (mclk_ps >= dimm_params[i].tCKmin_X_ps) {
 277                                         debug("CL = %u ok on DIMM %u at tCK=%u"
 278                                             " ps with its tCKmin_X_ps of %u\n",
 279                                                temp2, i, mclk_ps,
 280                                                dimm_params[i].tCKmin_X_ps);
 281                                         continue;
 282                                 } else {
 283                                         not_ok++;
 284                                 }
 285                         }
 286
 287                         if (dimm_params[i].caslat_X_minus_1 == temp2) {
 288                                 unsigned int tCKmin_X_minus_1_ps
 289                                         = dimm_params[i].tCKmin_X_minus_1_ps;
 290                                 if (mclk_ps >= tCKmin_X_minus_1_ps) {
 291                                         debug("CL = %u ok on DIMM %u at "
 292                                                 "tCK=%u ps with its "
 293                                                 "tCKmin_X_minus_1_ps of %u\n",
 294                                                temp2, i, mclk_ps,
 295                                                tCKmin_X_minus_1_ps);
 296                                         continue;
 297                                 } else {
 298                                         not_ok++;
 299                                 }
 300                         }
 301
 302                         if (dimm_params[i].caslat_X_minus_2 == temp2) {
 303                                 unsigned int tCKmin_X_minus_2_ps
 304                                         = dimm_params[i].tCKmin_X_minus_2_ps;
 305                                 if (mclk_ps >= tCKmin_X_minus_2_ps) {
 306                                         debug("CL = %u ok on DIMM %u at "
 307                                                 "tCK=%u ps with its "
 308                                                 "tCKmin_X_minus_2_ps of %u\n",
 309                                                temp2, i, mclk_ps,
 310                                                tCKmin_X_minus_2_ps);
 311                                         continue;
 312                                 } else {
 313                                         not_ok++;
 314                                 }
 315                         }
 316                 }
 317
 318                 if (!not_ok) {
 319                         lowest_good_caslat = temp2;
 320                 }
 321
 322                 temp1 &= ~(1 << temp2);
 323         }
 324
 325         debug("lowest common SPD-defined CAS latency = %u\n",
 326                lowest_good_caslat);
 327         outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
 328
 329
 330         /*
 331          * Compute a common 'de-rated' CAS latency.
 332          *
 333          * The strategy here is to find the *highest* dereated cas latency
 334          * with the assumption that all of the DIMMs will support a dereated
 335          * CAS latency higher than or equal to their lowest dereated value.
 336          */
 337         temp1 = 0;
 338         for (i = 0; i < number_of_dimms; i++) {
 339                 temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
 340         }
 341         outpdimm->highest_common_derated_caslat = temp1;
 342         debug("highest common dereated CAS latency = %u\n", temp1);
 343 #endif /* #if defined(CONFIG_FSL_DDR3) */
 344
 345         /* Determine if all DIMMs ECC capable. */
 346         temp1 = 1;
 347         for (i = 0; i < number_of_dimms; i++) {
 348                 if (dimm_params[i].n_ranks && dimm_params[i].edc_config != 2) {
 349                         temp1 = 0;
 350                         break;
 351                 }
 352         }
 353         if (temp1) {
 354                 debug("all DIMMs ECC capable\n");
 355         } else {
 356                 debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
 357         }
 358         outpdimm->all_DIMMs_ECC_capable = temp1;
 359
 360 #ifndef CONFIG_FSL_DDR3
 361         /* FIXME: move to somewhere else to validate. */
 362         if (mclk_ps > tCKmax_max_ps) {
 363                 printf("Warning: some of the installed DIMMs "
 364                                 "can not operate this slowly.\n");
 365                 return 1;
 366         }
 367 #endif
 368         /*
 369          * Compute additive latency.
 370          *
 371          * For DDR1, additive latency should be 0.
 372          *
 373          * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
 374          *      which comes from Trcd, and also note that:
 375          *          add_lat + caslat must be >= 4
 376          *
 377          * For DDR3, we use the AL=0
 378          *
 379          * When to use additive latency for DDR2:
 380          *
 381          * I. Because you are using CL=3 and need to do ODT on writes and
 382          *    want functionality.
 383          *    1. Are you going to use ODT? (Does your board not have
 384          *      additional termination circuitry for DQ, DQS, DQS_,
 385          *      DM, RDQS, RDQS_ for x4/x8 configs?)
 386          *    2. If so, is your lowest supported CL going to be 3?
 387          *    3. If so, then you must set AL=1 because
 388          *
 389          *       WL >= 3 for ODT on writes
 390          *       RL = AL + CL
 391          *       WL = RL - 1
 392          *       ->
 393          *       WL = AL + CL - 1
 394          *       AL + CL - 1 >= 3
 395          *       AL + CL >= 4
 396          *  QED
 397          *
 398          *  RL >= 3 for ODT on reads
 399          *  RL = AL + CL
 400          *
 401          *  Since CL aren't usually less than 2, AL=0 is a minimum,
 402          *  so the WL-derived AL should be the  -- FIXME?
 403          *
 404          * II. Because you are using auto-precharge globally and want to
 405          *     use additive latency (posted CAS) to get more bandwidth.
 406          *     1. Are you going to use auto-precharge mode globally?
 407          *
 408          *        Use addtivie latency and compute AL to be 1 cycle less than
 409          *        tRCD, i.e. the READ or WRITE command is in the cycle
 410          *        immediately following the ACTIVATE command..
 411          *
 412          * III. Because you feel like it or want to do some sort of
 413          *      degraded-performance experiment.
 414          *     1.  Do you just want to use additive latency because you feel
 415          *         like it?
 416          *
 417          * Validation:  AL is less than tRCD, and within the other
 418          * read-to-precharge constraints.
 419          */
 420
 421         additive_latency = 0;
 422
 423 #if defined(CONFIG_FSL_DDR2)
 424         if (lowest_good_caslat < 4) {
 425                 additive_latency = picos_to_mclk(tRCD_ps) - lowest_good_caslat;
 426                 if (mclk_to_picos(additive_latency) > tRCD_ps) {
 427                         additive_latency = picos_to_mclk(tRCD_ps);
 428                         debug("setting additive_latency to %u because it was "
 429                                 " greater than tRCD_ps\n", additive_latency);
 430                 }
 431         }
 432
 433 #elif defined(CONFIG_FSL_DDR3)
 434         /*
 435          * The system will not use the global auto-precharge mode.
 436          * However, it uses the page mode, so we set AL=0
 437          */
 438         additive_latency = 0;
 439 #endif
 440
 441         /*
 442          * Validate additive latency
 443          * FIXME: move to somewhere else to validate
 444          *
 445          * AL <= tRCD(min)
 446          */
 447         if (mclk_to_picos(additive_latency) > tRCD_ps) {
 448                 printf("Error: invalid additive latency exceeds tRCD(min).\n");
 449                 return 1;
 450         }
 451
 452         /*
 453          * RL = CL + AL;  RL >= 3 for ODT_RD_CFG to be enabled
 454          * WL = RL - 1;  WL >= 3 for ODT_WL_CFG to be enabled
 455          * ADD_LAT (the register) must be set to a value less
 456          * than ACTTORW if WL = 1, then AL must be set to 1
 457          * RD_TO_PRE (the register) must be set to a minimum
 458          * tRTP + AL if AL is nonzero
 459          */
 460
 461         /*
 462          * Additive latency will be applied only if the memctl option to
 463          * use it.
 464          */
 465         outpdimm->additive_latency = additive_latency;
 466
 467         return 0;
 468 }