board/cmi/flash.c

   1 /*
   2  * (C) Copyright 2003
   3  * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * File:                flash.c
  10  *
  11  * Discription:         This Driver is for 28F320J3A, 28F640J3A and
  12  *                      28F128J3A Intel flashs working in 16 Bit mode.
  13  *                      They are single bank flashs.
  14  *
  15  *                      Most of this code is taken from existing u-boot
  16  *                      source code.
  17  */
  18
  19
  20 #include <common.h>
  21 #include <mpc5xx.h>
  22
  23 #if defined(CONFIG_ENV_IS_IN_FLASH)
  24 # ifndef  CONFIG_ENV_ADDR
  25 #  define CONFIG_ENV_ADDR       (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
  26 # endif
  27 # ifndef  CONFIG_ENV_SIZE
  28 #  define CONFIG_ENV_SIZE       CONFIG_ENV_SECT_SIZE
  29 # endif
  30 # ifndef  CONFIG_ENV_SECT_SIZE
  31 #  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
  32 # endif
  33 #endif
  34
  35 #define FLASH_ID_MASK                   0xFFFF
  36 #define FLASH_BLOCK_SIZE                0x00010000
  37 #define FLASH_CMD_READ_ID               0x0090
  38 #define FLASH_CMD_RESET                 0x00ff
  39 #define FLASH_CMD_BLOCK_ERASE           0x0020
  40 #define FLASH_CMD_ERASE_CONFIRM         0x00D0
  41 #define FLASH_CMD_CLEAR_STATUS          0x0050
  42 #define FLASH_CMD_SUSPEND_ERASE         0x00B0
  43 #define FLASH_CMD_WRITE                 0x0040
  44 #define FLASH_CMD_PROTECT               0x0060
  45 #define FLASH_CMD_PROTECT_SET           0x0001
  46 #define FLASH_CMD_PROTECT_CLEAR         0x00D0
  47 #define FLASH_STATUS_DONE               0x0080
  48
  49 flash_info_t    flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
  50
  51 /*
  52  * Local function prototypes
  53  */
  54 static ulong    flash_get_size          (vu_short *addr, flash_info_t *info);
  55 static int      write_short             (flash_info_t *info, ulong dest, ushort data);
  56 static void     flash_get_offsets       (ulong base, flash_info_t *info);
  57
  58 /*
  59  * Initialize flash
  60  */
  61
  62 unsigned long flash_init (void)
  63 {
  64         unsigned long size_b0;
  65         int i;
  66
  67         /* Init: no FLASHes known */
  68         for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
  69                 flash_info[i].flash_id = FLASH_UNKNOWN;
  70         }
  71
  72         /* Static FLASH Bank configuration here - FIXME XXX */
  73 #if 1
  74         debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
  75 #endif
  76         size_b0 = flash_get_size((vu_short *)FLASH_BASE0_PRELIM, &flash_info[0]);
  77
  78         if (flash_info[0].flash_id == FLASH_UNKNOWN) {
  79                 printf ("## Unknown FLASH on Bank 0: "
  80                         "ID 0x%lx, Size = 0x%08lx = %ld MB\n",
  81                         flash_info[0].flash_id,
  82                         size_b0, size_b0<<20);
  83         }
  84
  85         flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
  86
  87         flash_info[0].size = size_b0;
  88
  89 #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
  90         /* monitor protection ON by default */
  91         flash_protect(FLAG_PROTECT_SET,
  92                       CONFIG_SYS_MONITOR_BASE,
  93                       CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
  94                       &flash_info[0]);
  95 #endif
  96
  97 #ifdef  CONFIG_ENV_IS_IN_FLASH
  98         /* ENV protection ON by default */
  99         flash_protect(FLAG_PROTECT_SET,
 100                       CONFIG_ENV_ADDR,
 101                       CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
 102                       &flash_info[0]);
 103 #endif
 104
 105         return size_b0;
 106 }
 107
 108 /*
 109  * Compute start adress of each sector (block)
 110  */
 111
 112 static void flash_get_offsets (ulong base, flash_info_t *info)
 113 {
 114         int i;
 115
 116         if (info->flash_id == FLASH_UNKNOWN) {
 117                 return;
 118         }
 119
 120         switch (info->flash_id & FLASH_VENDMASK) {
 121         case FLASH_MAN_INTEL:
 122             for (i = 0; i < info->sector_count; i++) {
 123                 info->start[i] = base + i * FLASH_BLOCK_SIZE;
 124             }
 125             return;
 126
 127         default:
 128             printf ("Don't know sector offsets for flash type 0x%lx\n",
 129                 info->flash_id);
 130             return;
 131         }
 132 }
 133
 134 /*
 135  * Print flash information
 136  */
 137 void flash_print_info  (flash_info_t *info)
 138 {
 139         int i;
 140
 141         if (info->flash_id == FLASH_UNKNOWN) {
 142                 printf ("missing or unknown FLASH type\n");
 143                 return;
 144         }
 145
 146         switch (info->flash_id & FLASH_VENDMASK) {
 147         case FLASH_MAN_AMD:     printf ("AMD ");                break;
 148         case FLASH_MAN_FUJ:     printf ("Fujitsu ");            break;
 149         case FLASH_MAN_SST:     printf ("SST ");                break;
 150         case FLASH_MAN_STM:     printf ("STM ");                break;
 151         case FLASH_MAN_INTEL:   printf ("Intel ");              break;
 152         case FLASH_MAN_MT:      printf ("MT ");                 break;
 153         default:                printf ("Unknown Vendor ");     break;
 154         }
 155
 156         switch (info->flash_id & FLASH_TYPEMASK) {
 157         case FLASH_28F320J3A:   printf ("28F320J3A (32Mbit) 16-Bit\n");
 158                                 break;
 159         case FLASH_28F640J3A:   printf ("28F640J3A (64Mbit) 16-Bit\n");
 160                                 break;
 161         case FLASH_28F128J3A:   printf ("28F128J3A (128Mbit) 16-Bit\n");
 162                                 break;
 163         default:                printf ("Unknown Chip Type\n");
 164                                 break;
 165         }
 166
 167         if (info->size >= (1 << 20)) {
 168                 i = 20;
 169         } else {
 170                 i = 10;
 171         }
 172         printf ("  Size: %ld %cB in %d Sectors\n",
 173                 info->size >> i,
 174                 (i == 20) ? 'M' : 'k',
 175                 info->sector_count);
 176
 177         printf ("  Sector Start Addresses:");
 178         for (i=0; i<info->sector_count; ++i) {
 179                 if ((i % 5) == 0)
 180                         printf ("\n   ");
 181                 printf (" %08lX%s",
 182                         info->start[i],
 183                         info->protect[i] ? " (RO)" : "     "
 184                 );
 185         }
 186         printf ("\n");
 187         return;
 188 }
 189
 190 /*
 191  * Get size of flash in bytes.
 192  * The following code cannot be run from FLASH!
 193  */
 194
 195 static ulong flash_get_size (vu_short *addr, flash_info_t *info)
 196 {
 197         vu_short value;
 198
 199         /* Read Manufacturer ID */
 200         addr[0] = FLASH_CMD_READ_ID;
 201         value = addr[0];
 202
 203         switch (value) {
 204         case (AMD_MANUFACT & FLASH_ID_MASK):
 205                 info->flash_id = FLASH_MAN_AMD;
 206                 break;
 207         case (FUJ_MANUFACT & FLASH_ID_MASK):
 208                 info->flash_id = FLASH_MAN_FUJ;
 209                 break;
 210         case (SST_MANUFACT & FLASH_ID_MASK):
 211                 info->flash_id = FLASH_MAN_SST;
 212                 break;
 213         case (STM_MANUFACT & FLASH_ID_MASK):
 214                 info->flash_id = FLASH_MAN_STM;
 215                 break;
 216         case (INTEL_MANUFACT & FLASH_ID_MASK):
 217                 info->flash_id = FLASH_MAN_INTEL;
 218                 break;
 219         default:
 220                 info->flash_id = FLASH_UNKNOWN;
 221                 info->sector_count = 0;
 222                 info->size = 0;
 223                 addr[0] = FLASH_CMD_RESET;      /* restore read mode */
 224                 return (0);                     /* no or unknown flash  */
 225         }
 226
 227         value = addr[1];                        /* device ID            */
 228
 229         switch (value) {
 230         case (INTEL_ID_28F320J3A  & FLASH_ID_MASK):
 231                 info->flash_id += FLASH_28F320J3A;
 232                 info->sector_count = 32;
 233                 info->size = 0x00400000;
 234                 break;                          /* =>  32 MBit          */
 235
 236         case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
 237                 info->flash_id += FLASH_28F640J3A;
 238                 info->sector_count = 64;
 239                 info->size = 0x00800000;
 240                 break;                          /* => 64 MBit           */
 241
 242         case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
 243                 info->flash_id += FLASH_28F128J3A;
 244                 info->sector_count = 128;
 245                 info->size = 0x01000000;
 246                 break;                          /* => 128 MBit          */
 247
 248         default:
 249                 info->flash_id = FLASH_UNKNOWN;
 250                 addr[0] = FLASH_CMD_RESET;      /* restore read mode */
 251                 return (0);                     /* => no or unknown flash */
 252
 253         }
 254
 255         if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
 256                 printf ("** ERROR: sector count %d > max (%d) **\n",
 257                         info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
 258                 info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 259         }
 260
 261         addr[0] = FLASH_CMD_RESET;              /* restore read mode */
 262
 263         return (info->size);
 264 }
 265
 266
 267 /*
 268  * Erase unprotected sectors
 269  */
 270
 271 int flash_erase (flash_info_t *info, int s_first, int s_last)
 272 {
 273         int flag, prot, sect;
 274         ulong start, now, last;
 275
 276         if ((s_first < 0) || (s_first > s_last)) {
 277                 if (info->flash_id == FLASH_UNKNOWN) {
 278                         printf ("- missing\n");
 279                 } else {
 280                         printf ("- no sectors to erase\n");
 281                 }
 282                 return 1;
 283         }
 284
 285         if ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) {
 286                 printf ("Can erase only Intel flash types - aborted\n");
 287                 return 1;
 288         }
 289
 290         prot = 0;
 291         for (sect=s_first; sect<=s_last; ++sect) {
 292                 if (info->protect[sect]) {
 293                         prot++;
 294                 }
 295         }
 296
 297         if (prot) {
 298                 printf ("- Warning: %d protected sectors will not be erased!\n",
 299                         prot);
 300         } else {
 301                 printf ("\n");
 302         }
 303
 304         start = get_timer (0);
 305         last  = start;
 306
 307         /* Start erase on unprotected sectors */
 308         for (sect = s_first; sect<=s_last; sect++) {
 309                 if (info->protect[sect] == 0) { /* not protected */
 310                         vu_short *addr = (vu_short *)(info->start[sect]);
 311                         unsigned long status;
 312
 313                         /* Disable interrupts which might cause a timeout here */
 314                         flag = disable_interrupts();
 315
 316 #ifdef DEBUG
 317                         printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]);
 318 #endif
 319
 320                         *addr = FLASH_CMD_CLEAR_STATUS;
 321                         *addr = FLASH_CMD_BLOCK_ERASE;
 322                         *addr = FLASH_CMD_ERASE_CONFIRM;
 323
 324                         /* re-enable interrupts if necessary */
 325                         if (flag)
 326                                 enable_interrupts();
 327
 328                         /* wait at least 80us - let's wait 1 ms */
 329                         udelay (1000);
 330
 331                         while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
 332                                 if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 333                                         printf("Flash erase timeout at address %lx\n", info->start[sect]);
 334                                         *addr = FLASH_CMD_SUSPEND_ERASE;
 335                                         *addr = FLASH_CMD_RESET;
 336                                         return 1;
 337                                 }
 338
 339                                 /* show that we're waiting */
 340                                 if ((now - last) > 1000) {      /* every second */
 341                                         putc ('.');
 342                                         last = now;
 343                                 }
 344                         }
 345                         *addr = FLASH_CMD_RESET;
 346                 }
 347         }
 348         printf (" done\n");
 349         return 0;
 350 }
 351
 352 /*
 353  * Copy memory to flash, returns:
 354  * 0 - OK
 355  * 1 - write timeout
 356  * 2 - Flash not erased
 357  * 4 - Flash not identified
 358  */
 359
 360 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 361 {
 362         ulong cp, wp;
 363         ushort data;
 364         int i, rc;
 365
 366         if (info->flash_id == FLASH_UNKNOWN) {
 367                 return 4;
 368         }
 369
 370         wp = (addr & ~1);       /* get lower word aligned address */
 371
 372         /*
 373          * handle unaligned start byte
 374          */
 375
 376         if (addr - wp) {
 377                 data = 0;
 378                 data = (data << 8) | *src++;
 379                 --cnt;
 380                 if ((rc = write_short(info, wp, data)) != 0) {
 381                         return (rc);
 382                 }
 383                 wp += 2;
 384         }
 385
 386         /*
 387          * handle word aligned part
 388          */
 389
 390         while (cnt >= 2) {
 391                 data = 0;
 392                 for (i=0; i<2; ++i) {
 393                         data = (data << 8) | *src++;
 394                 }
 395
 396                 if ((rc = write_short(info, wp, data)) != 0) {
 397                         return (rc);
 398                 }
 399                 wp  += 2;
 400                 cnt -= 2;
 401         }
 402
 403         if (cnt == 0) {
 404                 return (0);
 405         }
 406
 407         /*
 408          * handle unaligned tail bytes
 409          */
 410
 411         data = 0;
 412         for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
 413                 data = (data << 8) | *src++;
 414                 --cnt;
 415         }
 416         for (; i<2; ++i, ++cp) {
 417                 data = (data << 8) | (*(uchar *)cp);
 418         }
 419
 420         return (write_short(info, wp, data));
 421
 422 }
 423
 424 /*
 425  * Write 16 bit (short) to flash
 426  */
 427
 428 static int write_short (flash_info_t *info, ulong dest, ushort data)
 429 {
 430         vu_short *addr = (vu_short*)(info->start[0]);
 431         ulong start;
 432         int flag;
 433
 434         /* Check if Flash is (sufficiently) erased */
 435         if ((*((vu_short *)dest) & data) != data) {
 436                 return (2);
 437         }
 438
 439         /* Disable interrupts which might cause a timeout here */
 440         flag = disable_interrupts();
 441
 442         if (!(info->flash_id & FLASH_VENDMASK)) {
 443                 return 4;
 444         }
 445         *addr = FLASH_CMD_ERASE_CONFIRM;
 446         *addr = FLASH_CMD_WRITE;
 447
 448         *((vu_short *)dest) = data;
 449
 450         /* re-enable interrupts if necessary */
 451         if (flag) {
 452                 enable_interrupts();
 453         }
 454
 455         /* data polling for D7 */
 456         start = get_timer (0);
 457
 458         /* wait for error or finish */
 459         while(!(addr[0] & FLASH_STATUS_DONE)){
 460                 if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 461                         addr[0] = FLASH_CMD_RESET;
 462                         return (1);
 463                 }
 464         }
 465
 466         *addr = FLASH_CMD_RESET;
 467         return (0);
 468 }
 469
 470 /*
 471  * Protects a flash sector
 472  */
 473
 474 int flash_real_protect(flash_info_t *info, long sector, int prot)
 475 {
 476         vu_short *addr = (vu_short*)(info->start[sector]);
 477         ulong start;
 478
 479         *addr = FLASH_CMD_CLEAR_STATUS;
 480         *addr = FLASH_CMD_PROTECT;
 481
 482         if(prot) {
 483                 *addr = FLASH_CMD_PROTECT_SET;
 484         } else {
 485                 *addr = FLASH_CMD_PROTECT_CLEAR;
 486         }
 487
 488         /* wait for error or finish */
 489         start = get_timer (0);
 490         while(!(addr[0] & FLASH_STATUS_DONE)){
 491                 if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 492                         printf("Flash protect timeout at address %lx\n",  info->start[sector]);
 493                         addr[0] = FLASH_CMD_RESET;
 494                         return (1);
 495                 }
 496         }
 497         /* Set software protect flag */
 498         info->protect[sector] = prot;
 499         *addr = FLASH_CMD_RESET;
 500         return (0);
 501 }