board/esd/cpci5200/strataflash.c

   1 /*
   2  * (C) Copyright 2002
   3  * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #include <common.h>
  25 #include <asm/processor.h>
  26 #include <asm/cache.h>
  27
  28 #undef  DEBUG_FLASH
  29 /*
  30  * This file implements a Common Flash Interface (CFI) driver for U-Boot.
  31  * The width of the port and the width of the chips are determined at initialization.
  32  * These widths are used to calculate the address for access CFI data structures.
  33  * It has been tested on an Intel Strataflash implementation.
  34  *
  35  * References
  36  * JEDEC Standard JESD68 - Common Flash Interface (CFI)
  37  * JEDEC Standard JEP137-A Common Flash Interface (CFI) ID Codes
  38  * Intel Application Note 646 Common Flash Interface (CFI) and Command Sets
  39  * Intel 290667-008 3 Volt Intel StrataFlash Memory datasheet
  40  *
  41  * TODO
  42  * Use Primary Extended Query table (PRI) and Alternate Algorithm Query Table (ALT) to determine if protection is available
  43  * Add support for other command sets Use the PRI and ALT to determine command set
  44  * Verify erase and program timeouts.
  45  */
  46
  47 #define FLASH_CMD_CFI                   0x98
  48 #define FLASH_CMD_READ_ID               0x90
  49 #define FLASH_CMD_RESET                 0xff
  50 #define FLASH_CMD_BLOCK_ERASE           0x20
  51 #define FLASH_CMD_ERASE_CONFIRM         0xD0
  52 #define FLASH_CMD_WRITE                 0x40
  53 #define FLASH_CMD_PROTECT               0x60
  54 #define FLASH_CMD_PROTECT_SET           0x01
  55 #define FLASH_CMD_PROTECT_CLEAR         0xD0
  56 #define FLASH_CMD_CLEAR_STATUS          0x50
  57 #define FLASH_CMD_WRITE_TO_BUFFER       0xE8
  58 #define FLASH_CMD_WRITE_BUFFER_CONFIRM  0xD0
  59
  60 #define FLASH_STATUS_DONE               0x80
  61 #define FLASH_STATUS_ESS                0x40
  62 #define FLASH_STATUS_ECLBS              0x20
  63 #define FLASH_STATUS_PSLBS              0x10
  64 #define FLASH_STATUS_VPENS              0x08
  65 #define FLASH_STATUS_PSS                0x04
  66 #define FLASH_STATUS_DPS                0x02
  67 #define FLASH_STATUS_R                  0x01
  68 #define FLASH_STATUS_PROTECT            0x01
  69
  70 #define FLASH_OFFSET_CFI                0x55
  71 #define FLASH_OFFSET_CFI_RESP           0x10
  72 #define FLASH_OFFSET_WTOUT              0x1F
  73 #define FLASH_OFFSET_WBTOUT             0x20
  74 #define FLASH_OFFSET_ETOUT              0x21
  75 #define FLASH_OFFSET_CETOUT             0x22
  76 #define FLASH_OFFSET_WMAX_TOUT          0x23
  77 #define FLASH_OFFSET_WBMAX_TOUT         0x24
  78 #define FLASH_OFFSET_EMAX_TOUT          0x25
  79 #define FLASH_OFFSET_CEMAX_TOUT         0x26
  80 #define FLASH_OFFSET_SIZE               0x27
  81 #define FLASH_OFFSET_INTERFACE          0x28
  82 #define FLASH_OFFSET_BUFFER_SIZE        0x2A
  83 #define FLASH_OFFSET_NUM_ERASE_REGIONS  0x2C
  84 #define FLASH_OFFSET_ERASE_REGIONS      0x2D
  85 #define FLASH_OFFSET_PROTECT            0x02
  86 #define FLASH_OFFSET_USER_PROTECTION    0x85
  87 #define FLASH_OFFSET_INTEL_PROTECTION   0x81
  88
  89 #define FLASH_MAN_CFI                   0x01000000
  90
  91 typedef union {
  92         unsigned char c;
  93         unsigned short w;
  94         unsigned long l;
  95 } cfiword_t;
  96
  97 typedef union {
  98         unsigned char *cp;
  99         unsigned short *wp;
 100         unsigned long *lp;
 101 } cfiptr_t;
 102
 103 #define NUM_ERASE_REGIONS 4
 104
 105 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];    /* info for FLASH chips        */
 106
 107 /*-----------------------------------------------------------------------
 108  * Functions
 109  */
 110
 111 static void flash_add_byte(flash_info_t * info, cfiword_t * cword, uchar c);
 112 static void flash_make_cmd(flash_info_t * info, uchar cmd, void *cmdbuf);
 113 static void flash_write_cmd(flash_info_t * info, int sect, uchar offset,
 114                             uchar cmd);
 115 static int flash_isequal(flash_info_t * info, int sect, uchar offset,
 116                          uchar cmd);
 117 static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd);
 118 static int flash_detect_cfi(flash_info_t * info);
 119 static ulong flash_get_size(ulong base, int banknum);
 120 static int flash_write_cfiword(flash_info_t * info, ulong dest,
 121                                cfiword_t cword);
 122 static int flash_full_status_check(flash_info_t * info, ulong sector,
 123                                    ulong tout, char *prompt);
 124 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 125 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
 126                                  int len);
 127 #endif
 128 /*-----------------------------------------------------------------------
 129  * create an address based on the offset and the port width
 130  */
 131 inline uchar *flash_make_addr(flash_info_t * info, int sect, int offset)
 132 {
 133         return ((uchar *) (info->start[sect] + (offset * info->portwidth)));
 134 }
 135
 136 /*-----------------------------------------------------------------------
 137  * read a character at a port width address
 138  */
 139 inline uchar flash_read_uchar(flash_info_t * info, uchar offset)
 140 {
 141         uchar *cp;
 142         cp = flash_make_addr(info, 0, offset);
 143         return (cp[info->portwidth - 1]);
 144 }
 145
 146 /*-----------------------------------------------------------------------
 147  * read a short word by swapping for ppc format.
 148  */
 149 ushort flash_read_ushort(flash_info_t * info, int sect, uchar offset)
 150 {
 151         uchar *addr;
 152
 153         addr = flash_make_addr(info, sect, offset);
 154         return ((addr[(2 * info->portwidth) - 1] << 8) |
 155                 addr[info->portwidth - 1]);
 156
 157 }
 158
 159 /*-----------------------------------------------------------------------
 160  * read a long word by picking the least significant byte of each maiximum
 161  * port size word. Swap for ppc format.
 162  */
 163 ulong flash_read_long(flash_info_t * info, int sect, uchar offset)
 164 {
 165         uchar *addr;
 166
 167         addr = flash_make_addr(info, sect, offset);
 168         return ((addr[(2 * info->portwidth) - 1] << 24) |
 169                 (addr[(info->portwidth) - 1] << 16) |
 170                 (addr[(4 * info->portwidth) - 1] << 8) |
 171                 addr[(3 * info->portwidth) - 1]);
 172
 173 }
 174
 175 /*-----------------------------------------------------------------------
 176  */
 177 unsigned long flash_init(void)
 178 {
 179         unsigned long size;
 180         int i;
 181         unsigned long address;
 182
 183         /* The flash is positioned back to back, with the demultiplexing of the chip
 184          * based on the A24 address line.
 185          *
 186          */
 187
 188         address = CONFIG_SYS_FLASH_BASE;
 189         size = 0;
 190
 191         /* Init: no FLASHes known */
 192         for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 193                 flash_info[i].flash_id = FLASH_UNKNOWN;
 194                 size += flash_info[i].size = flash_get_size(address, i);
 195                 address += CONFIG_SYS_FLASH_INCREMENT;
 196                 if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 197                         printf
 198                             ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
 199                              i, flash_info[0].size, flash_info[i].size << 20);
 200                 }
 201         }
 202
 203 #if 0                           /* test-only */
 204         /* Monitor protection ON by default */
 205 #if (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
 206         for (i = 0;
 207              flash_info[0].start[i] < CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1;
 208              i++)
 209                 (void)flash_real_protect(&flash_info[0], i, 1);
 210 #endif
 211 #endif
 212
 213         return (size);
 214 }
 215
 216 /*-----------------------------------------------------------------------
 217  */
 218 int flash_erase(flash_info_t * info, int s_first, int s_last)
 219 {
 220         int rcode = 0;
 221         int prot;
 222         int sect;
 223
 224         if (info->flash_id != FLASH_MAN_CFI) {
 225                 printf("Can't erase unknown flash type - aborted\n");
 226                 return 1;
 227         }
 228         if ((s_first < 0) || (s_first > s_last)) {
 229                 printf("- no sectors to erase\n");
 230                 return 1;
 231         }
 232
 233         prot = 0;
 234         for (sect = s_first; sect <= s_last; ++sect) {
 235                 if (info->protect[sect]) {
 236                         prot++;
 237                 }
 238         }
 239         if (prot) {
 240                 printf("- Warning: %d protected sectors will not be erased!\n",
 241                        prot);
 242         } else {
 243                 printf("\n");
 244         }
 245
 246         for (sect = s_first; sect <= s_last; sect++) {
 247                 if (info->protect[sect] == 0) { /* not protected */
 248                         flash_write_cmd(info, sect, 0, FLASH_CMD_CLEAR_STATUS);
 249                         flash_write_cmd(info, sect, 0, FLASH_CMD_BLOCK_ERASE);
 250                         flash_write_cmd(info, sect, 0, FLASH_CMD_ERASE_CONFIRM);
 251
 252                         if (flash_full_status_check
 253                             (info, sect, info->erase_blk_tout, "erase")) {
 254                                 rcode = 1;
 255                         } else
 256                                 printf(".");
 257                 }
 258         }
 259         printf(" done\n");
 260         return rcode;
 261 }
 262
 263 /*-----------------------------------------------------------------------
 264  */
 265 void flash_print_info(flash_info_t * info)
 266 {
 267         int i;
 268
 269         if (info->flash_id != FLASH_MAN_CFI) {
 270                 printf("missing or unknown FLASH type\n");
 271                 return;
 272         }
 273
 274         printf("CFI conformant FLASH (%d x %d)",
 275                (info->portwidth << 3), (info->chipwidth << 3));
 276         printf("  Size: %ld MB in %d Sectors\n",
 277                info->size >> 20, info->sector_count);
 278         printf
 279             (" Erase timeout %ld ms, write timeout %ld ms, buffer write timeout %ld ms, buffer size %d\n",
 280              info->erase_blk_tout, info->write_tout, info->buffer_write_tout,
 281              info->buffer_size);
 282
 283         printf("  Sector Start Addresses:");
 284         for (i = 0; i < info->sector_count; ++i) {
 285                 if ((i % 5) == 0)
 286                         printf("\n");
 287                 printf(" %08lX%5s",
 288                        info->start[i], info->protect[i] ? " (RO)" : " ");
 289         }
 290         printf("\n");
 291         return;
 292 }
 293
 294 /*-----------------------------------------------------------------------
 295  * Copy memory to flash, returns:
 296  * 0 - OK
 297  * 1 - write timeout
 298  * 2 - Flash not erased
 299  */
 300 int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 301 {
 302         ulong wp;
 303         ulong cp;
 304         int aln;
 305         cfiword_t cword;
 306         int i, rc;
 307
 308         /* get lower aligned address */
 309         wp = (addr & ~(info->portwidth - 1));
 310
 311         /* handle unaligned start */
 312         if ((aln = addr - wp) != 0) {
 313                 cword.l = 0;
 314                 cp = wp;
 315                 for (i = 0; i < aln; ++i, ++cp)
 316                         flash_add_byte(info, &cword, (*(uchar *) cp));
 317
 318                 for (; (i < info->portwidth) && (cnt > 0); i++) {
 319                         flash_add_byte(info, &cword, *src++);
 320                         cnt--;
 321                         cp++;
 322                 }
 323                 for (; (cnt == 0) && (i < info->portwidth); ++i, ++cp)
 324                         flash_add_byte(info, &cword, (*(uchar *) cp));
 325                 if ((rc = flash_write_cfiword(info, wp, cword)) != 0)
 326                         return rc;
 327                 wp = cp;
 328         }
 329 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 330         while (cnt >= info->portwidth) {
 331                 i = info->buffer_size > cnt ? cnt : info->buffer_size;
 332                 if ((rc = flash_write_cfibuffer(info, wp, src, i)) != ERR_OK)
 333                         return rc;
 334                 wp += i;
 335                 src += i;
 336                 cnt -= i;
 337         }
 338 #else
 339         /* handle the aligned part */
 340         while (cnt >= info->portwidth) {
 341                 cword.l = 0;
 342                 for (i = 0; i < info->portwidth; i++) {
 343                         flash_add_byte(info, &cword, *src++);
 344                 }
 345                 if ((rc = flash_write_cfiword(info, wp, cword)) != 0)
 346                         return rc;
 347                 wp += info->portwidth;
 348                 cnt -= info->portwidth;
 349         }
 350 #endif                          /* CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
 351         if (cnt == 0) {
 352                 return (0);
 353         }
 354
 355         /*
 356          * handle unaligned tail bytes
 357          */
 358         cword.l = 0;
 359         for (i = 0, cp = wp; (i < info->portwidth) && (cnt > 0); ++i, ++cp) {
 360                 flash_add_byte(info, &cword, *src++);
 361                 --cnt;
 362         }
 363         for (; i < info->portwidth; ++i, ++cp) {
 364                 flash_add_byte(info, &cword, (*(uchar *) cp));
 365         }
 366
 367         return flash_write_cfiword(info, wp, cword);
 368 }
 369
 370 /*-----------------------------------------------------------------------
 371  */
 372 int flash_real_protect(flash_info_t * info, long sector, int prot)
 373 {
 374         int retcode = 0;
 375
 376         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 377         flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT);
 378         if (prot)
 379                 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_SET);
 380         else
 381                 flash_write_cmd(info, sector, 0, FLASH_CMD_PROTECT_CLEAR);
 382
 383         if ((retcode =
 384              flash_full_status_check(info, sector, info->erase_blk_tout,
 385                                      prot ? "protect" : "unprotect")) == 0) {
 386
 387                 info->protect[sector] = prot;
 388                 /* Intel's unprotect unprotects all locking */
 389                 if (prot == 0) {
 390                         int i;
 391                         for (i = 0; i < info->sector_count; i++) {
 392                                 if (info->protect[i])
 393                                         flash_real_protect(info, i, 1);
 394                         }
 395                 }
 396         }
 397
 398         return retcode;
 399 }
 400
 401 /*-----------------------------------------------------------------------
 402  *  wait for XSR.7 to be set. Time out with an error if it does not.
 403  *  This routine does not set the flash to read-array mode.
 404  */
 405 static int flash_status_check(flash_info_t * info, ulong sector, ulong tout,
 406                               char *prompt)
 407 {
 408         ulong start;
 409
 410         /* Wait for command completion */
 411         start = get_timer(0);
 412         while (!flash_isset(info, sector, 0, FLASH_STATUS_DONE)) {
 413                 if (get_timer(start) > info->erase_blk_tout) {
 414                         printf("Flash %s timeout at address %lx\n", prompt,
 415                                info->start[sector]);
 416                         flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
 417                         return ERR_TIMOUT;
 418                 }
 419         }
 420         return ERR_OK;
 421 }
 422
 423 /*-----------------------------------------------------------------------
 424  * Wait for XSR.7 to be set, if it times out print an error, otherwise do a full status check.
 425  * This routine sets the flash to read-array mode.
 426  */
 427 static int flash_full_status_check(flash_info_t * info, ulong sector,
 428                                    ulong tout, char *prompt)
 429 {
 430         int retcode;
 431         retcode = flash_status_check(info, sector, tout, prompt);
 432         if ((retcode == ERR_OK)
 433             && !flash_isequal(info, sector, 0, FLASH_STATUS_DONE)) {
 434                 retcode = ERR_INVAL;
 435                 printf("Flash %s error at address %lx\n", prompt,
 436                        info->start[sector]);
 437                 if (flash_isset
 438                     (info, sector, 0,
 439                      FLASH_STATUS_ECLBS | FLASH_STATUS_PSLBS)) {
 440                         printf("Command Sequence Error.\n");
 441                 } else if (flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)) {
 442                         printf("Block Erase Error.\n");
 443                         retcode = ERR_NOT_ERASED;
 444                 } else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
 445                         printf("Locking Error\n");
 446                 }
 447                 if (flash_isset(info, sector, 0, FLASH_STATUS_DPS)) {
 448                         printf("Block locked.\n");
 449                         retcode = ERR_PROTECTED;
 450                 }
 451                 if (flash_isset(info, sector, 0, FLASH_STATUS_VPENS))
 452                         printf("Vpp Low Error.\n");
 453         }
 454         flash_write_cmd(info, sector, 0, FLASH_CMD_RESET);
 455         return retcode;
 456 }
 457
 458 /*-----------------------------------------------------------------------
 459  */
 460 static void flash_add_byte(flash_info_t * info, cfiword_t * cword, uchar c)
 461 {
 462         switch (info->portwidth) {
 463         case FLASH_CFI_8BIT:
 464                 cword->c = c;
 465                 break;
 466         case FLASH_CFI_16BIT:
 467                 cword->w = (cword->w << 8) | c;
 468                 break;
 469         case FLASH_CFI_32BIT:
 470                 cword->l = (cword->l << 8) | c;
 471         }
 472 }
 473
 474 /*-----------------------------------------------------------------------
 475  * make a proper sized command based on the port and chip widths
 476  */
 477 static void flash_make_cmd(flash_info_t * info, uchar cmd, void *cmdbuf)
 478 {
 479         int i;
 480         uchar *cp = (uchar *) cmdbuf;
 481         for (i = 0; i < info->portwidth; i++)
 482                 *cp++ = ((i + 1) % info->chipwidth) ? '\0' : cmd;
 483 }
 484
 485 /*
 486  * Write a proper sized command to the correct address
 487  */
 488 static void flash_write_cmd(flash_info_t * info, int sect, uchar offset,
 489                             uchar cmd)
 490 {
 491
 492         volatile cfiptr_t addr;
 493         cfiword_t cword;
 494         addr.cp = flash_make_addr(info, sect, offset);
 495         flash_make_cmd(info, cmd, &cword);
 496         switch (info->portwidth) {
 497         case FLASH_CFI_8BIT:
 498                 *addr.cp = cword.c;
 499                 break;
 500         case FLASH_CFI_16BIT:
 501                 *addr.wp = cword.w;
 502                 break;
 503         case FLASH_CFI_32BIT:
 504                 *addr.lp = cword.l;
 505                 break;
 506         }
 507 }
 508
 509 /*-----------------------------------------------------------------------
 510  */
 511 static int flash_isequal(flash_info_t * info, int sect, uchar offset, uchar cmd)
 512 {
 513         cfiptr_t cptr;
 514         cfiword_t cword;
 515         int retval;
 516         cptr.cp = flash_make_addr(info, sect, offset);
 517         flash_make_cmd(info, cmd, &cword);
 518         switch (info->portwidth) {
 519         case FLASH_CFI_8BIT:
 520                 retval = (cptr.cp[0] == cword.c);
 521                 break;
 522         case FLASH_CFI_16BIT:
 523                 retval = (cptr.wp[0] == cword.w);
 524                 break;
 525         case FLASH_CFI_32BIT:
 526                 retval = (cptr.lp[0] == cword.l);
 527                 break;
 528         default:
 529                 retval = 0;
 530                 break;
 531         }
 532         return retval;
 533 }
 534
 535 /*-----------------------------------------------------------------------
 536  */
 537 static int flash_isset(flash_info_t * info, int sect, uchar offset, uchar cmd)
 538 {
 539         cfiptr_t cptr;
 540         cfiword_t cword;
 541         int retval;
 542         cptr.cp = flash_make_addr(info, sect, offset);
 543         flash_make_cmd(info, cmd, &cword);
 544         switch (info->portwidth) {
 545         case FLASH_CFI_8BIT:
 546                 retval = ((cptr.cp[0] & cword.c) == cword.c);
 547                 break;
 548         case FLASH_CFI_16BIT:
 549                 retval = ((cptr.wp[0] & cword.w) == cword.w);
 550                 break;
 551         case FLASH_CFI_32BIT:
 552                 retval = ((cptr.lp[0] & cword.l) == cword.l);
 553                 break;
 554         default:
 555                 retval = 0;
 556                 break;
 557         }
 558         return retval;
 559 }
 560
 561 /*-----------------------------------------------------------------------
 562  * detect if flash is compatible with the Common Flash Interface (CFI)
 563  * http://www.jedec.org/download/search/jesd68.pdf
 564  *
 565  */
 566 static int flash_detect_cfi(flash_info_t * info)
 567 {
 568
 569         for (info->portwidth = FLASH_CFI_8BIT;
 570              info->portwidth <= FLASH_CFI_32BIT; info->portwidth <<= 1) {
 571                 for (info->chipwidth = FLASH_CFI_BY8;
 572                      info->chipwidth <= info->portwidth;
 573                      info->chipwidth <<= 1) {
 574                         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
 575                         flash_write_cmd(info, 0, FLASH_OFFSET_CFI,
 576                                         FLASH_CMD_CFI);
 577                         if (flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP, 'Q')
 578                             && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 1,
 579                                              'R')
 580                             && flash_isequal(info, 0, FLASH_OFFSET_CFI_RESP + 2,
 581                                              'Y'))
 582                                 return 1;
 583                 }
 584         }
 585         return 0;
 586 }
 587
 588 /*
 589  * The following code cannot be run from FLASH!
 590  *
 591  */
 592 static ulong flash_get_size(ulong base, int banknum)
 593 {
 594         flash_info_t *info = &flash_info[banknum];
 595         int i, j;
 596         int sect_cnt;
 597         unsigned long sector;
 598         unsigned long tmp;
 599         int size_ratio = 0;
 600         uchar num_erase_regions;
 601         int erase_region_size;
 602         int erase_region_count;
 603
 604         info->start[0] = base;
 605 #if 0
 606         invalidate_dcache_range(base, base + 0x400);
 607 #endif
 608         if (flash_detect_cfi(info)) {
 609
 610                 size_ratio = info->portwidth / info->chipwidth;
 611                 num_erase_regions =
 612                     flash_read_uchar(info, FLASH_OFFSET_NUM_ERASE_REGIONS);
 613
 614                 sect_cnt = 0;
 615                 sector = base;
 616                 for (i = 0; i < num_erase_regions; i++) {
 617                         if (i > NUM_ERASE_REGIONS) {
 618                                 printf("%d erase regions found, only %d used\n",
 619                                        num_erase_regions, NUM_ERASE_REGIONS);
 620                                 break;
 621                         }
 622                         tmp =
 623                             flash_read_long(info, 0,
 624                                             FLASH_OFFSET_ERASE_REGIONS);
 625                         erase_region_size =
 626                             (tmp & 0xffff) ? ((tmp & 0xffff) * 256) : 128;
 627                         tmp >>= 16;
 628                         erase_region_count = (tmp & 0xffff) + 1;
 629                         for (j = 0; j < erase_region_count; j++) {
 630                                 info->start[sect_cnt] = sector;
 631                                 sector += (erase_region_size * size_ratio);
 632                                 info->protect[sect_cnt] =
 633                                     flash_isset(info, sect_cnt,
 634                                                 FLASH_OFFSET_PROTECT,
 635                                                 FLASH_STATUS_PROTECT);
 636                                 sect_cnt++;
 637                         }
 638                 }
 639
 640                 info->sector_count = sect_cnt;
 641                 /* multiply the size by the number of chips */
 642                 info->size =
 643                     (1 << flash_read_uchar(info, FLASH_OFFSET_SIZE)) *
 644                     size_ratio;
 645                 info->buffer_size =
 646                     (1 << flash_read_ushort(info, 0, FLASH_OFFSET_BUFFER_SIZE));
 647                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_ETOUT);
 648                 info->erase_blk_tout =
 649                     (tmp *
 650                      (1 << flash_read_uchar(info, FLASH_OFFSET_EMAX_TOUT)));
 651                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WBTOUT);
 652                 info->buffer_write_tout =
 653                     (tmp *
 654                      (1 << flash_read_uchar(info, FLASH_OFFSET_WBMAX_TOUT)));
 655                 tmp = 1 << flash_read_uchar(info, FLASH_OFFSET_WTOUT);
 656                 info->write_tout =
 657                     (tmp *
 658                      (1 << flash_read_uchar(info, FLASH_OFFSET_WMAX_TOUT))) /
 659                     1000;
 660                 info->flash_id = FLASH_MAN_CFI;
 661         }
 662
 663         flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
 664 #ifdef DEBUG_FLASH
 665         printf("portwidth=%d chipwidth=%d\n", info->portwidth, info->chipwidth);        /* test-only */
 666 #endif
 667 #ifdef DEBUG_FLASH
 668         printf("found %d erase regions\n", num_erase_regions);
 669 #endif
 670 #ifdef DEBUG_FLASH
 671         printf("size=%08x sectors=%08x \n", info->size, info->sector_count);
 672 #endif
 673         return (info->size);
 674 }
 675
 676 /*-----------------------------------------------------------------------
 677  */
 678 static int flash_write_cfiword(flash_info_t * info, ulong dest, cfiword_t cword)
 679 {
 680
 681         cfiptr_t ctladdr;
 682         cfiptr_t cptr;
 683         int flag;
 684
 685         ctladdr.cp = flash_make_addr(info, 0, 0);
 686         cptr.cp = (uchar *) dest;
 687
 688         /* Check if Flash is (sufficiently) erased */
 689         switch (info->portwidth) {
 690         case FLASH_CFI_8BIT:
 691                 flag = ((cptr.cp[0] & cword.c) == cword.c);
 692                 break;
 693         case FLASH_CFI_16BIT:
 694                 flag = ((cptr.wp[0] & cword.w) == cword.w);
 695                 break;
 696         case FLASH_CFI_32BIT:
 697                 flag = ((cptr.lp[0] & cword.l) == cword.l);
 698                 break;
 699         default:
 700                 return 2;
 701         }
 702         if (!flag)
 703                 return 2;
 704
 705         /* Disable interrupts which might cause a timeout here */
 706         flag = disable_interrupts();
 707
 708         flash_write_cmd(info, 0, 0, FLASH_CMD_CLEAR_STATUS);
 709         flash_write_cmd(info, 0, 0, FLASH_CMD_WRITE);
 710
 711         switch (info->portwidth) {
 712         case FLASH_CFI_8BIT:
 713                 cptr.cp[0] = cword.c;
 714                 break;
 715         case FLASH_CFI_16BIT:
 716                 cptr.wp[0] = cword.w;
 717                 break;
 718         case FLASH_CFI_32BIT:
 719                 cptr.lp[0] = cword.l;
 720                 break;
 721         }
 722
 723         /* re-enable interrupts if necessary */
 724         if (flag)
 725                 enable_interrupts();
 726
 727         return flash_full_status_check(info, 0, info->write_tout, "write");
 728 }
 729
 730 #ifdef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 731
 732 /* loop through the sectors from the highest address
 733  * when the passed address is greater or equal to the sector address
 734  * we have a match
 735  */
 736 static int find_sector(flash_info_t * info, ulong addr)
 737 {
 738         int sector;
 739         for (sector = info->sector_count - 1; sector >= 0; sector--) {
 740                 if (addr >= info->start[sector])
 741                         break;
 742         }
 743         return sector;
 744 }
 745
 746 static int flash_write_cfibuffer(flash_info_t * info, ulong dest, uchar * cp,
 747                                  int len)
 748 {
 749
 750         int sector;
 751         int cnt;
 752         int retcode;
 753         volatile cfiptr_t src;
 754         volatile cfiptr_t dst;
 755
 756         src.cp = cp;
 757         dst.cp = (uchar *) dest;
 758         sector = find_sector(info, dest);
 759         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 760         flash_write_cmd(info, sector, 0, FLASH_CMD_WRITE_TO_BUFFER);
 761         if ((retcode = flash_status_check(info, sector, info->buffer_write_tout,
 762                                           "write to buffer")) == ERR_OK) {
 763                 switch (info->portwidth) {
 764                 case FLASH_CFI_8BIT:
 765                         cnt = len;
 766                         break;
 767                 case FLASH_CFI_16BIT:
 768                         cnt = len >> 1;
 769                         break;
 770                 case FLASH_CFI_32BIT:
 771                         cnt = len >> 2;
 772                         break;
 773                 default:
 774                         return ERR_INVAL;
 775                         break;
 776                 }
 777                 flash_write_cmd(info, sector, 0, (uchar) cnt - 1);
 778                 while (cnt-- > 0) {
 779                         switch (info->portwidth) {
 780                         case FLASH_CFI_8BIT:
 781                                 *dst.cp++ = *src.cp++;
 782                                 break;
 783                         case FLASH_CFI_16BIT:
 784                                 *dst.wp++ = *src.wp++;
 785                                 break;
 786                         case FLASH_CFI_32BIT:
 787                                 *dst.lp++ = *src.lp++;
 788                                 break;
 789                         default:
 790                                 return ERR_INVAL;
 791                                 break;
 792                         }
 793                 }
 794                 flash_write_cmd(info, sector, 0,
 795                                 FLASH_CMD_WRITE_BUFFER_CONFIRM);
 796                 retcode =
 797                     flash_full_status_check(info, sector,
 798                                             info->buffer_write_tout,
 799                                             "buffer write");
 800         }
 801         flash_write_cmd(info, sector, 0, FLASH_CMD_CLEAR_STATUS);
 802         return retcode;
 803 }
 804 #endif                          /* CONFIG_SYS_USE_FLASH_BUFFER_WRITE */