board/freescale/ls1021aqds/ddr.c

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <fsl_ddr_sdram.h>
   9 #include <fsl_ddr_dimm_params.h>
  10 #include "ddr.h"
  11
  12 DECLARE_GLOBAL_DATA_PTR;
  13
  14 void fsl_ddr_board_options(memctl_options_t *popts,
  15                            dimm_params_t *pdimm,
  16                            unsigned int ctrl_num)
  17 {
  18         const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
  19         ulong ddr_freq;
  20
  21         if (ctrl_num > 3) {
  22                 printf("Not supported controller number %d\n", ctrl_num);
  23                 return;
  24         }
  25         if (!pdimm->n_ranks)
  26                 return;
  27
  28         pbsp = udimms[0];
  29
  30         /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
  31          * freqency and n_banks specified in board_specific_parameters table.
  32          */
  33         ddr_freq = get_ddr_freq(0) / 1000000;
  34         while (pbsp->datarate_mhz_high) {
  35                 if (pbsp->n_ranks == pdimm->n_ranks) {
  36                         if (ddr_freq <= pbsp->datarate_mhz_high) {
  37                                 popts->clk_adjust = pbsp->clk_adjust;
  38                                 popts->wrlvl_start = pbsp->wrlvl_start;
  39                                 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
  40                                 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
  41                                 popts->cpo_override = pbsp->cpo_override;
  42                                 popts->write_data_delay =
  43                                         pbsp->write_data_delay;
  44                                 goto found;
  45                         }
  46                         pbsp_highest = pbsp;
  47                 }
  48                 pbsp++;
  49         }
  50
  51         if (pbsp_highest) {
  52                 printf("Error: board specific timing not found for %lu MT/s\n",
  53                        ddr_freq);
  54                 printf("Trying to use the highest speed (%u) parameters\n",
  55                        pbsp_highest->datarate_mhz_high);
  56                 popts->clk_adjust = pbsp_highest->clk_adjust;
  57                 popts->wrlvl_start = pbsp_highest->wrlvl_start;
  58                 popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
  59                 popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
  60         } else {
  61                 panic("DIMM is not supported by this board");
  62         }
  63 found:
  64         debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
  65               pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
  66
  67         /* force DDR bus width to 32 bits */
  68         popts->data_bus_width = 1;
  69         popts->otf_burst_chop_en = 0;
  70         popts->burst_length = DDR_BL8;
  71
  72         /*
  73          * Factors to consider for half-strength driver enable:
  74          *      - number of DIMMs installed
  75          */
  76         popts->half_strength_driver_enable = 1;
  77         /*
  78          * Write leveling override
  79          */
  80         popts->wrlvl_override = 1;
  81         popts->wrlvl_sample = 0xf;
  82
  83         /*
  84          * Rtt and Rtt_WR override
  85          */
  86         popts->rtt_override = 0;
  87
  88         /* Enable ZQ calibration */
  89         popts->zq_en = 1;
  90
  91 #ifdef CONFIG_SYS_FSL_DDR4
  92         popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
  93         popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
  94                           DDR_CDR2_VREF_OVRD(70);       /* Vref = 70% */
  95 #else
  96         popts->cswl_override = DDR_CSWL_CS0;
  97
  98         /* DHC_EN =1, ODT = 75 Ohm */
  99         popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
 100         popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
 101 #endif
 102 }
 103
 104 #ifdef CONFIG_SYS_DDR_RAW_TIMING
 105 dimm_params_t ddr_raw_timing = {
 106         .n_ranks = 1,
 107         .rank_density = 1073741824u,
 108         .capacity = 1073741824u,
 109         .primary_sdram_width = 32,
 110         .ec_sdram_width = 0,
 111         .registered_dimm = 0,
 112         .mirrored_dimm = 0,
 113         .n_row_addr = 15,
 114         .n_col_addr = 10,
 115         .n_banks_per_sdram_device = 8,
 116         .edc_config = 0,
 117         .burst_lengths_bitmask = 0x0c,
 118
 119         .tckmin_x_ps = 1071,
 120         .caslat_x = 0xfe << 4,  /* 5,6,7,8 */
 121         .taa_ps = 13125,
 122         .twr_ps = 15000,
 123         .trcd_ps = 13125,
 124         .trrd_ps = 7500,
 125         .trp_ps = 13125,
 126         .tras_ps = 37500,
 127         .trc_ps = 50625,
 128         .trfc_ps = 160000,
 129         .twtr_ps = 7500,
 130         .trtp_ps = 7500,
 131         .refresh_rate_ps = 7800000,
 132         .tfaw_ps = 37500,
 133 };
 134
 135 int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
 136                             unsigned int controller_number,
 137                             unsigned int dimm_number)
 138 {
 139         static const char dimm_model[] = "Fixed DDR on board";
 140
 141         if (((controller_number == 0) && (dimm_number == 0)) ||
 142             ((controller_number == 1) && (dimm_number == 0))) {
 143                 memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t));
 144                 memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
 145                 memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
 146         }
 147
 148         return 0;
 149 }
 150 #endif
 151
 152 phys_size_t initdram(int board_type)
 153 {
 154         phys_size_t dram_size;
 155
 156         puts("Initializing DDR....using SPD\n");
 157         dram_size = fsl_ddr_sdram();
 158
 159         return dram_size;
 160 }
 161
 162 void dram_init_banksize(void)
 163 {
 164         gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
 165         gd->bd->bi_dram[0].size = gd->ram_size;
 166 }