board/gdsys/405ex/io64.c

   1 /*
   2  * (C) Copyright 2010
   3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
   4  *
   5  * based on kilauea.c
   6  * by Stefan Roese, DENX Software Engineering, sr@denx.de.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <asm/ppc4xx.h>
  13 #include <asm/ppc405.h>
  14 #include <libfdt.h>
  15 #include <fdt_support.h>
  16 #include <asm/processor.h>
  17 #include <asm/io.h>
  18 #include <asm/errno.h>
  19 #include <asm/ppc4xx-gpio.h>
  20 #include <flash.h>
  21
  22 #include <pca9698.h>
  23
  24 #include "405ex.h"
  25 #include <gdsys_fpga.h>
  26
  27 #include <miiphy.h>
  28 #include <i2c.h>
  29 #include <dtt.h>
  30
  31 DECLARE_GLOBAL_DATA_PTR;
  32
  33 #define PHYREG_CONTROL                          0
  34 #define PHYREG_PAGE_ADDRESS                     22
  35 #define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1    16
  36 #define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2    26
  37 #define PHYREG_PG2_MAC_SPECIFIC_STATUS_1        17
  38 #define PHYREG_PG2_MAC_SPECIFIC_CONTROL         21
  39
  40 #define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
  41 #define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
  42 #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
  43 #define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300)
  44
  45 enum {
  46         UNITTYPE_CCD_SWITCH = 1,
  47 };
  48
  49 enum {
  50         HWVER_100 = 0,
  51         HWVER_110 = 1,
  52 };
  53
  54 struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
  55
  56 static inline void blank_string(int size)
  57 {
  58         int i;
  59
  60         for (i = 0; i < size; i++)
  61                 putc('\b');
  62         for (i = 0; i < size; i++)
  63                 putc(' ');
  64         for (i = 0; i < size; i++)
  65                 putc('\b');
  66 }
  67
  68 /*
  69  * Board early initialization function
  70  */
  71 int misc_init_r(void)
  72 {
  73         /* startup fans */
  74         dtt_init();
  75
  76 #ifdef CONFIG_ENV_IS_IN_FLASH
  77         /* Monitor protection ON by default */
  78         flash_protect(FLAG_PROTECT_SET,
  79                       -CONFIG_SYS_MONITOR_LEN,
  80                       0xffffffff,
  81                       &flash_info[0]);
  82 #endif
  83
  84         return 0;
  85 }
  86
  87 static void print_fpga_info(unsigned dev)
  88 {
  89         u16 versions;
  90         u16 fpga_version;
  91         u16 fpga_features;
  92         int fpga_state = get_fpga_state(dev);
  93
  94         unsigned unit_type;
  95         unsigned hardware_version;
  96         unsigned feature_channels;
  97         unsigned feature_expansion;
  98
  99         FPGA_GET_REG(dev, versions, &versions);
 100         FPGA_GET_REG(dev, fpga_version, &fpga_version);
 101         FPGA_GET_REG(dev, fpga_features, &fpga_features);
 102
 103         printf("FPGA%d: ", dev);
 104         if (fpga_state & FPGA_STATE_PLATFORM)
 105                 printf("(legacy) ");
 106
 107         if (fpga_state & FPGA_STATE_DONE_FAILED) {
 108                 printf(" done timed out\n");
 109                 return;
 110         }
 111
 112         if (fpga_state & FPGA_STATE_REFLECTION_FAILED) {
 113                 printf(" refelectione test failed\n");
 114                 return;
 115         }
 116
 117         unit_type = (versions & 0xf000) >> 12;
 118         hardware_version = versions & 0x000f;
 119         feature_channels = fpga_features & 0x007f;
 120         feature_expansion = fpga_features & (1<<15);
 121
 122         switch (unit_type) {
 123         case UNITTYPE_CCD_SWITCH:
 124                 printf("CCD-Switch");
 125                 break;
 126
 127         default:
 128                 printf("UnitType %d(not supported)", unit_type);
 129                 break;
 130         }
 131
 132         switch (hardware_version) {
 133         case HWVER_100:
 134                 printf(" HW-Ver 1.00\n");
 135                 break;
 136
 137         case HWVER_110:
 138                 printf(" HW-Ver 1.10\n");
 139                 break;
 140
 141         default:
 142                 printf(" HW-Ver %d(not supported)\n",
 143                        hardware_version);
 144                 break;
 145         }
 146
 147         printf("       FPGA V %d.%02d, features:",
 148                 fpga_version / 100, fpga_version % 100);
 149
 150         printf(" %d channel(s)", feature_channels);
 151
 152         printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
 153 }
 154
 155 int checkboard(void)
 156 {
 157         char *s = getenv("serial#");
 158
 159         printf("Board: CATCenter Io64\n");
 160
 161         if (s != NULL) {
 162                 puts(", serial# ");
 163                 puts(s);
 164         }
 165
 166         return 0;
 167 }
 168
 169 int configure_gbit_phy(char *bus, unsigned char addr)
 170 {
 171         unsigned short value;
 172
 173         /* select page 0 */
 174         if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000))
 175                 goto err_out;
 176         /* switch to powerdown */
 177         if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
 178                 &value))
 179                 goto err_out;
 180         if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
 181                 value | 0x0004))
 182                 goto err_out;
 183         /* select page 2 */
 184         if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002))
 185                 goto err_out;
 186         /* disable SGMII autonegotiation */
 187         if (miiphy_write(bus, addr, PHYREG_PG2_MAC_SPECIFIC_CONTROL, 48))
 188                 goto err_out;
 189         /* select page 0 */
 190         if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000))
 191                 goto err_out;
 192         /* switch from powerdown to normal operation */
 193         if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
 194                 &value))
 195                 goto err_out;
 196         if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1,
 197                 value & ~0x0004))
 198                 goto err_out;
 199         /* reset phy so settings take effect */
 200         if (miiphy_write(bus, addr, PHYREG_CONTROL, 0x9140))
 201                 goto err_out;
 202
 203         return 0;
 204
 205 err_out:
 206         printf("Error writing to the PHY addr=%02x\n", addr);
 207         return -1;
 208 }
 209
 210 int verify_gbit_phy(char *bus, unsigned char addr)
 211 {
 212         unsigned short value;
 213
 214         /* select page 2 */
 215         if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002))
 216                 goto err_out;
 217         /* verify SGMII link status */
 218         if (miiphy_read(bus, addr, PHYREG_PG2_MAC_SPECIFIC_STATUS_1, &value))
 219                 goto err_out;
 220         if (!(value & (1 << 10)))
 221                 return -2;
 222
 223         return 0;
 224
 225 err_out:
 226         printf("Error writing to the PHY addr=%02x\n", addr);
 227         return -1;
 228 }
 229
 230 int last_stage_init(void)
 231 {
 232         unsigned int k;
 233         unsigned int fpga;
 234         int failed = 0;
 235         char str_phys[] = "Setup PHYs -";
 236         char str_serdes[] = "Start SERDES blocks";
 237         char str_channels[] = "Start FPGA channels";
 238         char str_locks[] = "Verify SERDES locks";
 239         char str_hicb[] = "Verify HICB status";
 240         char str_status[] = "Verify PHY status -";
 241         char slash[] = "\\|/-\\|/-";
 242
 243         print_fpga_info(0);
 244         print_fpga_info(1);
 245
 246         /* setup Gbit PHYs */
 247         puts("TRANS: ");
 248         puts(str_phys);
 249         miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
 250                 bb_miiphy_read, bb_miiphy_write);
 251
 252         for (k = 0; k < 32; ++k) {
 253                 configure_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k);
 254                 putc('\b');
 255                 putc(slash[k % 8]);
 256         }
 257
 258         miiphy_register(CONFIG_SYS_GBIT_MII1_BUSNAME,
 259                 bb_miiphy_read, bb_miiphy_write);
 260
 261         for (k = 0; k < 32; ++k) {
 262                 configure_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k);
 263                 putc('\b');
 264                 putc(slash[k % 8]);
 265         }
 266         blank_string(strlen(str_phys));
 267
 268         /* take fpga serdes blocks out of reset */
 269         puts(str_serdes);
 270         udelay(500000);
 271         FPGA_SET_REG(0, quad_serdes_reset, 0);
 272         FPGA_SET_REG(1, quad_serdes_reset, 0);
 273         blank_string(strlen(str_serdes));
 274
 275         /* take channels out of reset */
 276         puts(str_channels);
 277         udelay(500000);
 278         for (fpga = 0; fpga < 2; ++fpga) {
 279                 for (k = 0; k < 32; ++k)
 280                         FPGA_SET_REG(fpga, ch[k].config_int, 0);
 281         }
 282         blank_string(strlen(str_channels));
 283
 284         /* verify channels serdes lock */
 285         puts(str_locks);
 286         udelay(500000);
 287         for (fpga = 0; fpga < 2; ++fpga) {
 288                 for (k = 0; k < 32; ++k) {
 289                         u16 status;
 290                         FPGA_GET_REG(fpga, ch[k].status_int, &status);
 291                         if (!(status & (1 << 4))) {
 292                                 failed = 1;
 293                                 printf("fpga %d channel %d: no serdes lock\n",
 294                                         fpga, k);
 295                         }
 296                         /* reset events */
 297                         FPGA_SET_REG(fpga, ch[k].status_int, 0);
 298                 }
 299         }
 300         blank_string(strlen(str_locks));
 301
 302         /* verify hicb_status */
 303         puts(str_hicb);
 304         for (fpga = 0; fpga < 2; ++fpga) {
 305                 for (k = 0; k < 32; ++k) {
 306                         u16 status;
 307                         FPGA_GET_REG(fpga, hicb_ch[k].status_int, &status);
 308                         if (status)
 309                                 printf("fpga %d hicb %d: hicb status %04x\n",
 310                                         fpga, k, status);
 311                         /* reset events */
 312                         FPGA_SET_REG(fpga, hicb_ch[k].status_int, 0);
 313                 }
 314         }
 315         blank_string(strlen(str_hicb));
 316
 317         /* verify phy status */
 318         puts(str_status);
 319         for (k = 0; k < 32; ++k) {
 320                 if (verify_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k)) {
 321                         printf("verify baseboard phy %d failed\n", k);
 322                         failed = 1;
 323                 }
 324                 putc('\b');
 325                 putc(slash[k % 8]);
 326         }
 327         for (k = 0; k < 32; ++k) {
 328                 if (verify_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k)) {
 329                         printf("verify extensionboard phy %d failed\n", k);
 330                         failed = 1;
 331                 }
 332                 putc('\b');
 333                 putc(slash[k % 8]);
 334         }
 335         blank_string(strlen(str_status));
 336
 337         printf("Starting 64 channels %s\n", failed ? "failed" : "ok");
 338
 339         return 0;
 340 }
 341
 342 void gd405ex_init(void)
 343 {
 344         unsigned int k;
 345
 346         if (i2c_probe(0x22)) { /* i2c_probe returns 0 on success */
 347                 for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
 348                         gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
 349         } else {
 350                 pca9698_direction_output(0x22, 39, 1);
 351         }
 352 }
 353
 354 void gd405ex_set_fpga_reset(unsigned state)
 355 {
 356         int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
 357
 358         if (legacy) {
 359                 if (state) {
 360                         out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
 361                         out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
 362                 } else {
 363                         out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
 364                         out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
 365                 }
 366         } else {
 367                 pca9698_set_value(0x22, 39, state ? 0 : 1);
 368         }
 369 }
 370
 371 void gd405ex_setup_hw(void)
 372 {
 373         gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED_N, 0);
 374         gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED, 1);
 375 }
 376
 377 int gd405ex_get_fpga_done(unsigned fpga)
 378 {
 379         int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
 380
 381         if (legacy)
 382                 return in_le16((void *)LATCH3_BASE)
 383                         & CONFIG_SYS_FPGA_DONE(fpga);
 384         else
 385                 return pca9698_get_value(0x22, fpga ? 9 : 8);
 386 }