board/karo/tx6/tx6qdl.c

   1 /*
   2  * Copyright (C) 2012,2013 Lothar Waßmann <LW@KARO-electronics.de>
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License
   9  * version 2 as published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  */
  17
  18 #include <common.h>
  19 #include <errno.h>
  20 #include <libfdt.h>
  21 #include <fdt_support.h>
  22 #include <lcd.h>
  23 #include <netdev.h>
  24 #include <mmc.h>
  25 #include <fsl_esdhc.h>
  26 #include <video_fb.h>
  27 #include <ipu.h>
  28 #include <mxcfb.h>
  29 #include <i2c.h>
  30 #include <linux/fb.h>
  31 #include <asm/io.h>
  32 #include <asm/gpio.h>
  33 #include <asm/arch/mx6-pins.h>
  34 #include <asm/arch/clock.h>
  35 #include <asm/arch/imx-regs.h>
  36 #include <asm/arch/crm_regs.h>
  37 #include <asm/arch/sys_proto.h>
  38
  39 #include "../common/karo.h"
  40
  41 #define TX6_FEC_RST_GPIO                IMX_GPIO_NR(7, 6)
  42 #define TX6_FEC_PWR_GPIO                IMX_GPIO_NR(3, 20)
  43 #define TX6_FEC_INT_GPIO                IMX_GPIO_NR(2, 4)
  44 #define TX6_LED_GPIO                    IMX_GPIO_NR(2, 20)
  45
  46 #define TX6_LCD_PWR_GPIO                IMX_GPIO_NR(2, 31)
  47 #define TX6_LCD_RST_GPIO                IMX_GPIO_NR(3, 29)
  48 #define TX6_LCD_BACKLIGHT_GPIO          IMX_GPIO_NR(1, 1)
  49
  50 #define TX6_RESET_OUT_GPIO              IMX_GPIO_NR(7, 12)
  51
  52 #define TEMPERATURE_MIN                 -40
  53 #define TEMPERATURE_HOT                 80
  54 #define TEMPERATURE_MAX                 125
  55
  56 DECLARE_GLOBAL_DATA_PTR;
  57
  58 #define MUX_CFG_SION                    IOMUX_PAD(0, 0, IOMUX_CONFIG_SION, 0, 0, 0)
  59
  60 static const iomux_v3_cfg_t tx6qdl_pads[] = {
  61         /* NAND flash pads */
  62         MX6_PAD_NANDF_CLE__RAWNAND_CLE,
  63         MX6_PAD_NANDF_ALE__RAWNAND_ALE,
  64         MX6_PAD_NANDF_WP_B__RAWNAND_RESETN,
  65         MX6_PAD_NANDF_RB0__RAWNAND_READY0,
  66         MX6_PAD_NANDF_CS0__RAWNAND_CE0N,
  67         MX6_PAD_SD4_CMD__RAWNAND_RDN,
  68         MX6_PAD_SD4_CLK__RAWNAND_WRN,
  69         MX6_PAD_NANDF_D0__RAWNAND_D0,
  70         MX6_PAD_NANDF_D1__RAWNAND_D1,
  71         MX6_PAD_NANDF_D2__RAWNAND_D2,
  72         MX6_PAD_NANDF_D3__RAWNAND_D3,
  73         MX6_PAD_NANDF_D4__RAWNAND_D4,
  74         MX6_PAD_NANDF_D5__RAWNAND_D5,
  75         MX6_PAD_NANDF_D6__RAWNAND_D6,
  76         MX6_PAD_NANDF_D7__RAWNAND_D7,
  77
  78         /* RESET_OUT */
  79         MX6_PAD_GPIO_17__GPIO_7_12,
  80
  81         /* UART pads */
  82 #if CONFIG_MXC_UART_BASE == UART1_BASE
  83         MX6_PAD_SD3_DAT7__UART1_TXD,
  84         MX6_PAD_SD3_DAT6__UART1_RXD,
  85         MX6_PAD_SD3_DAT1__UART1_RTS,
  86         MX6_PAD_SD3_DAT0__UART1_CTS,
  87 #endif
  88 #if CONFIG_MXC_UART_BASE == UART2_BASE
  89         MX6_PAD_SD4_DAT4__UART2_RXD,
  90         MX6_PAD_SD4_DAT7__UART2_TXD,
  91         MX6_PAD_SD4_DAT5__UART2_RTS,
  92         MX6_PAD_SD4_DAT6__UART2_CTS,
  93 #endif
  94 #if CONFIG_MXC_UART_BASE == UART3_BASE
  95         MX6_PAD_EIM_D24__UART3_TXD,
  96         MX6_PAD_EIM_D25__UART3_RXD,
  97         MX6_PAD_SD3_RST__UART3_RTS,
  98         MX6_PAD_SD3_DAT3__UART3_CTS,
  99 #endif
 100         /* internal I2C */
 101         MX6_PAD_EIM_D28__I2C1_SDA,
 102         MX6_PAD_EIM_D21__I2C1_SCL,
 103
 104         /* FEC PHY GPIO functions */
 105         MX6_PAD_EIM_D20__GPIO_3_20 | MUX_CFG_SION, /* PHY POWER */
 106         MX6_PAD_SD3_DAT2__GPIO_7_6 | MUX_CFG_SION, /* PHY RESET */
 107         MX6_PAD_SD3_DAT4__GPIO_7_1, /* PHY INT */
 108 };
 109
 110 static const iomux_v3_cfg_t tx6qdl_fec_pads[] = {
 111         /* FEC functions */
 112         MX6_PAD_ENET_MDC__ENET_MDC,
 113         MX6_PAD_ENET_MDIO__ENET_MDIO,
 114         MX6_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT,
 115         MX6_PAD_ENET_RX_ER__ENET_RX_ER,
 116         MX6_PAD_ENET_CRS_DV__ENET_RX_EN,
 117         MX6_PAD_ENET_RXD1__ENET_RDATA_1,
 118         MX6_PAD_ENET_RXD0__ENET_RDATA_0,
 119         MX6_PAD_ENET_TX_EN__ENET_TX_EN,
 120         MX6_PAD_ENET_TXD1__ENET_TDATA_1,
 121         MX6_PAD_ENET_TXD0__ENET_TDATA_0,
 122 };
 123
 124 static const struct gpio tx6qdl_gpios[] = {
 125         { TX6_RESET_OUT_GPIO, GPIOF_OUTPUT_INIT_HIGH, "#RESET_OUT", },
 126         { TX6_FEC_PWR_GPIO, GPIOF_OUTPUT_INIT_HIGH, "FEC PHY PWR", },
 127         { TX6_FEC_RST_GPIO, GPIOF_OUTPUT_INIT_LOW, "FEC PHY RESET", },
 128         { TX6_FEC_INT_GPIO, GPIOF_INPUT, "FEC PHY INT", },
 129 };
 130
 131 /*
 132  * Functions
 133  */
 134 /* placed in section '.data' to prevent overwriting relocation info
 135  * overlayed with bss
 136  */
 137 static u32 wrsr __attribute__((section(".data")));
 138
 139 #define WRSR_POR                        (1 << 4)
 140 #define WRSR_TOUT                       (1 << 1)
 141 #define WRSR_SFTW                       (1 << 0)
 142
 143 static void print_reset_cause(void)
 144 {
 145         struct src *src_regs = (struct src *)SRC_BASE_ADDR;
 146         void __iomem *wdt_base = (void __iomem *)WDOG1_BASE_ADDR;
 147         u32 srsr;
 148         char *dlm = "";
 149
 150         printf("Reset cause: ");
 151
 152         srsr = readl(&src_regs->srsr);
 153         wrsr = readw(wdt_base + 4);
 154
 155         if (wrsr & WRSR_POR) {
 156                 printf("%sPOR", dlm);
 157                 dlm = " | ";
 158         }
 159         if (srsr & 0x00004) {
 160                 printf("%sCSU", dlm);
 161                 dlm = " | ";
 162         }
 163         if (srsr & 0x00008) {
 164                 printf("%sIPP USER", dlm);
 165                 dlm = " | ";
 166         }
 167         if (srsr & 0x00010) {
 168                 if (wrsr & WRSR_SFTW) {
 169                         printf("%sSOFT", dlm);
 170                         dlm = " | ";
 171                 }
 172                 if (wrsr & WRSR_TOUT) {
 173                         printf("%sWDOG", dlm);
 174                         dlm = " | ";
 175                 }
 176         }
 177         if (srsr & 0x00020) {
 178                 printf("%sJTAG HIGH-Z", dlm);
 179                 dlm = " | ";
 180         }
 181         if (srsr & 0x00040) {
 182                 printf("%sJTAG SW", dlm);
 183                 dlm = " | ";
 184         }
 185         if (srsr & 0x10000) {
 186                 printf("%sWARM BOOT", dlm);
 187                 dlm = " | ";
 188         }
 189         if (dlm[0] == '\0')
 190                 printf("unknown");
 191
 192         printf("\n");
 193 }
 194
 195 int read_cpu_temperature(void);
 196 int check_cpu_temperature(int boot);
 197
 198 static void tx6qdl_print_cpuinfo(void)
 199 {
 200         u32 cpurev = get_cpu_rev();
 201         char *cpu_str = "?";
 202
 203         switch ((cpurev >> 12) & 0xff) {
 204         case MXC_CPU_MX6SL:
 205                 cpu_str = "SL";
 206                 break;
 207         case MXC_CPU_MX6DL:
 208                 cpu_str = "DL";
 209                 break;
 210         case MXC_CPU_MX6SOLO:
 211                 cpu_str = "SOLO";
 212                 break;
 213         case MXC_CPU_MX6Q:
 214                 cpu_str = "Q";
 215                 break;
 216         }
 217
 218         printf("CPU:   Freescale i.MX6%s rev%d.%d at %d MHz\n",
 219                 cpu_str,
 220                 (cpurev & 0x000F0) >> 4,
 221                 (cpurev & 0x0000F) >> 0,
 222                 mxc_get_clock(MXC_ARM_CLK) / 1000000);
 223
 224         print_reset_cause();
 225         check_cpu_temperature(1);
 226 }
 227
 228 #define LTC3676_DVB2A           0x0C
 229 #define LTC3676_DVB2B           0x0D
 230 #define LTC3676_DVB4A           0x10
 231 #define LTC3676_DVB4B           0x11
 232
 233 #define VDD_SOC_mV              (1375 + 50)
 234 #define VDD_CORE_mV             (1375 + 50)
 235
 236 #define mV_to_regval(mV)        (((mV) * 360 / 330 - 825 + 1) / 25)
 237 #define regval_to_mV(v)         (((v) * 25 + 825) * 330 / 360)
 238
 239 static int setup_pmic_voltages(void)
 240 {
 241         int ret;
 242         unsigned char value;
 243
 244         i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 245
 246         ret = i2c_probe(CONFIG_SYS_I2C_SLAVE);
 247         if (ret != 0) {
 248                 printf("Failed to initialize I2C\n");
 249                 return ret;
 250         }
 251
 252         ret = i2c_read(CONFIG_SYS_I2C_SLAVE, 0x11, 1, &value, 1);
 253         if (ret) {
 254                 printf("%s: i2c_read error: %d\n", __func__, ret);
 255                 return ret;
 256         }
 257
 258         /* VDDCORE/VDDSOC default 1.375V is not enough, considering
 259            pfuze tolerance and IR drop and ripple, need increase
 260            to 1.425V for SabreSD */
 261
 262         value = 0x39; /* VB default value & PGOOD not forced when slewing */
 263         ret = i2c_write(CONFIG_SYS_I2C_SLAVE, LTC3676_DVB2B, 1, &value, 1);
 264         if (ret) {
 265                 printf("%s: failed to write PMIC DVB2B register: %d\n",
 266                         __func__, ret);
 267                 return ret;
 268         }
 269         ret = i2c_write(CONFIG_SYS_I2C_SLAVE, LTC3676_DVB4B, 1, &value, 1);
 270         if (ret) {
 271                 printf("%s: failed to write PMIC DVB4B register: %d\n",
 272                         __func__, ret);
 273                 return ret;
 274         }
 275
 276         value = mV_to_regval(VDD_SOC_mV);
 277         ret = i2c_write(CONFIG_SYS_I2C_SLAVE, LTC3676_DVB2A, 1, &value, 1);
 278         if (ret) {
 279                 printf("%s: failed to write PMIC DVB2A register: %d\n",
 280                         __func__, ret);
 281                 return ret;
 282         }
 283         printf("VDDSOC  set to %dmV\n", regval_to_mV(value));
 284
 285         value = mV_to_regval(VDD_CORE_mV);
 286         ret = i2c_write(CONFIG_SYS_I2C_SLAVE, LTC3676_DVB4A, 1, &value, 1);
 287         if (ret) {
 288                 printf("%s: failed to write PMIC DVB4A register: %d\n",
 289                         __func__, ret);
 290                 return ret;
 291         }
 292         printf("VDDCORE set to %dmV\n", regval_to_mV(value));
 293         return 0;
 294 }
 295
 296 int board_early_init_f(void)
 297 {
 298         gpio_request_array(tx6qdl_gpios, ARRAY_SIZE(tx6qdl_gpios));
 299         imx_iomux_v3_setup_multiple_pads(tx6qdl_pads, ARRAY_SIZE(tx6qdl_pads));
 300
 301         return 0;
 302 }
 303
 304 int board_init(void)
 305 {
 306         int ret;
 307
 308         /* Address of boot parameters */
 309         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x1000;
 310 #ifdef CONFIG_OF_LIBFDT
 311         gd->bd->bi_arch_number = -1;
 312 #else
 313         gd->bd->bi_arch_number = 4429;
 314 #endif
 315         ret = setup_pmic_voltages();
 316         if (ret) {
 317                 printf("Failed to setup PMIC voltages\n");
 318                 hang();
 319         }
 320         return 0;
 321 }
 322
 323 int dram_init(void)
 324 {
 325         /* dram_init must store complete ramsize in gd->ram_size */
 326         gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
 327                                 PHYS_SDRAM_1_SIZE);
 328         return 0;
 329 }
 330
 331 void dram_init_banksize(void)
 332 {
 333         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 334         gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1,
 335                         PHYS_SDRAM_1_SIZE);
 336 #if CONFIG_NR_DRAM_BANKS > 1
 337         gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 338         gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2,
 339                         PHYS_SDRAM_2_SIZE);
 340 #endif
 341 }
 342
 343 #ifdef  CONFIG_CMD_MMC
 344 static const iomux_v3_cfg_t mmc0_pads[] = {
 345         MX6_PAD_SD1_CMD__USDHC1_CMD,
 346         MX6_PAD_SD1_CLK__USDHC1_CLK,
 347         MX6_PAD_SD1_DAT0__USDHC1_DAT0,
 348         MX6_PAD_SD1_DAT1__USDHC1_DAT1,
 349         MX6_PAD_SD1_DAT2__USDHC1_DAT2,
 350         MX6_PAD_SD1_DAT3__USDHC1_DAT3,
 351         /* SD1 CD */
 352         MX6_PAD_SD3_CMD__GPIO_7_2,
 353 };
 354
 355 static const iomux_v3_cfg_t mmc1_pads[] = {
 356         MX6_PAD_SD2_CMD__USDHC2_CMD,
 357         MX6_PAD_SD2_CLK__USDHC2_CLK,
 358         MX6_PAD_SD2_DAT0__USDHC2_DAT0,
 359         MX6_PAD_SD2_DAT1__USDHC2_DAT1,
 360         MX6_PAD_SD2_DAT2__USDHC2_DAT2,
 361         MX6_PAD_SD2_DAT3__USDHC2_DAT3,
 362         /* SD2 CD */
 363         MX6_PAD_SD3_CLK__GPIO_7_3,
 364 };
 365
 366 static struct tx6_esdhc_cfg {
 367         const iomux_v3_cfg_t *pads;
 368         int num_pads;
 369         enum mxc_clock clkid;
 370         struct fsl_esdhc_cfg cfg;
 371         int cd_gpio;
 372 } tx6qdl_esdhc_cfg[] = {
 373         {
 374                 .pads = mmc0_pads,
 375                 .num_pads = ARRAY_SIZE(mmc0_pads),
 376                 .clkid = MXC_ESDHC_CLK,
 377                 .cfg = {
 378                         .esdhc_base = (void __iomem *)USDHC1_BASE_ADDR,
 379                         .max_bus_width = 4,
 380                 },
 381                 .cd_gpio = IMX_GPIO_NR(7, 2),
 382         },
 383         {
 384                 .pads = mmc1_pads,
 385                 .num_pads = ARRAY_SIZE(mmc1_pads),
 386                 .clkid = MXC_ESDHC2_CLK,
 387                 .cfg = {
 388                         .esdhc_base = (void __iomem *)USDHC2_BASE_ADDR,
 389                         .max_bus_width = 4,
 390                 },
 391                 .cd_gpio = IMX_GPIO_NR(7, 3),
 392         },
 393 };
 394
 395 static inline struct tx6_esdhc_cfg *to_tx6_esdhc_cfg(struct fsl_esdhc_cfg *cfg)
 396 {
 397         void *p = cfg;
 398
 399         return p - offsetof(struct tx6_esdhc_cfg, cfg);
 400 }
 401
 402 int board_mmc_getcd(struct mmc *mmc)
 403 {
 404         struct tx6_esdhc_cfg *cfg = to_tx6_esdhc_cfg(mmc->priv);
 405
 406         if (cfg->cd_gpio < 0)
 407                 return cfg->cd_gpio;
 408
 409         debug("SD card %d is %spresent\n",
 410                 cfg - tx6qdl_esdhc_cfg,
 411                 gpio_get_value(cfg->cd_gpio) ? "NOT " : "");
 412         return !gpio_get_value(cfg->cd_gpio);
 413 }
 414
 415 int board_mmc_init(bd_t *bis)
 416 {
 417         int i;
 418
 419         for (i = 0; i < ARRAY_SIZE(tx6qdl_esdhc_cfg); i++) {
 420                 struct mmc *mmc;
 421                 struct tx6_esdhc_cfg *cfg = &tx6qdl_esdhc_cfg[i];
 422                 int ret;
 423
 424                 if (i >= CONFIG_SYS_FSL_ESDHC_NUM)
 425                         break;
 426
 427                 cfg->cfg.sdhc_clk = mxc_get_clock(cfg->clkid);
 428                 imx_iomux_v3_setup_multiple_pads(cfg->pads, cfg->num_pads);
 429
 430                 ret = gpio_request_one(cfg->cd_gpio,
 431                                 GPIOF_INPUT, "MMC CD");
 432                 if (ret) {
 433                         printf("Error %d requesting GPIO%d_%d\n",
 434                                 ret, cfg->cd_gpio / 32, cfg->cd_gpio % 32);
 435                         continue;
 436                 }
 437
 438                 debug("%s: Initializing MMC slot %d\n", __func__, i);
 439                 fsl_esdhc_initialize(bis, &cfg->cfg);
 440
 441                 mmc = find_mmc_device(i);
 442                 if (mmc == NULL)
 443                         continue;
 444                 if (board_mmc_getcd(mmc) > 0)
 445                         mmc_init(mmc);
 446         }
 447         return 0;
 448 }
 449 #endif /* CONFIG_CMD_MMC */
 450
 451 #ifdef CONFIG_FEC_MXC
 452
 453 #define FEC_PAD_CTL     (PAD_CTL_DVS | PAD_CTL_DSE_HIGH | \
 454                         PAD_CTL_SRE_FAST)
 455 #define FEC_PAD_CTL2    (PAD_CTL_DVS | PAD_CTL_SRE_FAST)
 456 #define GPIO_PAD_CTL    (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
 457
 458 #ifndef ETH_ALEN
 459 #define ETH_ALEN 6
 460 #endif
 461
 462 int board_eth_init(bd_t *bis)
 463 {
 464         int ret;
 465
 466         /* delay at least 21ms for the PHY internal POR signal to deassert */
 467         udelay(22000);
 468
 469         imx_iomux_v3_setup_multiple_pads(tx6qdl_fec_pads, ARRAY_SIZE(tx6qdl_fec_pads));
 470
 471         /* Deassert RESET to the external phy */
 472         gpio_set_value(TX6_FEC_RST_GPIO, 1);
 473
 474         ret = cpu_eth_init(bis);
 475         if (ret)
 476                 printf("cpu_eth_init() failed: %d\n", ret);
 477
 478         return ret;
 479 }
 480 #endif /* CONFIG_FEC_MXC */
 481
 482 enum {
 483         LED_STATE_INIT = -1,
 484         LED_STATE_OFF,
 485         LED_STATE_ON,
 486 };
 487
 488 static inline int calc_blink_rate(int tmp)
 489 {
 490         return CONFIG_SYS_HZ + CONFIG_SYS_HZ / 10 -
 491                 (tmp - TEMPERATURE_MIN) * CONFIG_SYS_HZ /
 492                 (TEMPERATURE_HOT - TEMPERATURE_MIN);
 493 }
 494
 495 void show_activity(int arg)
 496 {
 497         static int led_state = LED_STATE_INIT;
 498         static int blink_rate;
 499         static ulong last;
 500
 501         if (led_state == LED_STATE_INIT) {
 502                 last = get_timer(0);
 503                 gpio_set_value(TX6_LED_GPIO, 1);
 504                 led_state = LED_STATE_ON;
 505                 blink_rate = calc_blink_rate(check_cpu_temperature(0));
 506         } else {
 507                 if (get_timer(last) > blink_rate) {
 508                         blink_rate = calc_blink_rate(check_cpu_temperature(0));
 509                         last = get_timer_masked();
 510                         if (led_state == LED_STATE_ON) {
 511                                 gpio_set_value(TX6_LED_GPIO, 0);
 512                         } else {
 513                                 gpio_set_value(TX6_LED_GPIO, 1);
 514                         }
 515                         led_state = 1 - led_state;
 516                 }
 517         }
 518 }
 519
 520 static const iomux_v3_cfg_t stk5_pads[] = {
 521         /* SW controlled LED on STK5 baseboard */
 522         MX6_PAD_EIM_A18__GPIO_2_20,
 523
 524         /* LCD data pins */
 525         MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
 526         MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
 527         MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
 528         MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
 529         MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
 530         MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
 531         MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
 532         MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
 533         MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
 534         MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
 535         MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
 536         MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
 537         MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
 538         MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
 539         MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
 540         MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
 541         MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
 542         MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
 543         MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
 544         MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
 545         MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
 546         MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
 547         MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
 548         MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
 549         MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2, /* HSYNC */
 550         MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3, /* VSYNC */
 551         MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, /* OE_ACD */
 552         MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, /* LSCLK */
 553
 554         /* I2C bus on DIMM pins 40/41 */
 555         MX6_PAD_GPIO_6__I2C3_SDA,
 556         MX6_PAD_GPIO_3__I2C3_SCL,
 557
 558         /* TSC200x PEN IRQ */
 559         MX6_PAD_EIM_D26__GPIO_3_26,
 560
 561         /* EDT-FT5x06 Polytouch panel */
 562         MX6_PAD_NANDF_CS2__GPIO_6_15, /* IRQ */
 563         MX6_PAD_EIM_A16__GPIO_2_22, /* RESET */
 564         MX6_PAD_EIM_A17__GPIO_2_21, /* WAKE */
 565
 566         /* USBH1 */
 567         MX6_PAD_EIM_D31__GPIO_3_31, /* VBUSEN */
 568         MX6_PAD_EIM_D30__GPIO_3_30, /* OC */
 569         /* USBOTG */
 570         MX6_PAD_EIM_D23__GPIO_3_23, /* USBOTG ID */
 571         MX6_PAD_GPIO_7__GPIO_1_7, /* VBUSEN */
 572         MX6_PAD_GPIO_8__GPIO_1_8, /* OC */
 573 };
 574
 575 static const struct gpio stk5_gpios[] = {
 576         { TX6_LED_GPIO, GPIOF_OUTPUT_INIT_LOW, "HEARTBEAT LED", },
 577
 578         { IMX_GPIO_NR(3, 23), GPIOF_INPUT, "USBOTG ID", },
 579         { IMX_GPIO_NR(1, 8), GPIOF_INPUT, "USBOTG OC", },
 580         { IMX_GPIO_NR(1, 7), GPIOF_OUTPUT_INIT_LOW, "USBOTG VBUS enable", },
 581         { IMX_GPIO_NR(3, 30), GPIOF_INPUT, "USBH1 OC", },
 582         { IMX_GPIO_NR(3, 31), GPIOF_OUTPUT_INIT_LOW, "USBH1 VBUS enable", },
 583 };
 584
 585 #ifdef CONFIG_LCD
 586 vidinfo_t panel_info = {
 587         /* set to max. size supported by SoC */
 588         .vl_col = 1920,
 589         .vl_row = 1080,
 590
 591         .vl_bpix = LCD_COLOR24,    /* Bits per pixel, 0: 1bpp, 1: 2bpp, 2: 4bpp, 3: 8bpp ... */
 592 };
 593
 594 static struct fb_videomode tx6_fb_modes[] = {
 595         {
 596                 /* Standard VGA timing */
 597                 .name           = "VGA",
 598                 .refresh        = 60,
 599                 .xres           = 640,
 600                 .yres           = 480,
 601                 .pixclock       = KHZ2PICOS(25175),
 602                 .left_margin    = 48,
 603                 .hsync_len      = 96,
 604                 .right_margin   = 16,
 605                 .upper_margin   = 31,
 606                 .vsync_len      = 2,
 607                 .lower_margin   = 12,
 608                 .sync           = FB_SYNC_CLK_LAT_FALL,
 609         },
 610         {
 611                 /* Emerging ETV570 640 x 480 display. Syncs low active,
 612                  * DE high active, 115.2 mm x 86.4 mm display area
 613                  * VGA compatible timing
 614                  */
 615                 .name           = "ETV570",
 616                 .refresh        = 60,
 617                 .xres           = 640,
 618                 .yres           = 480,
 619                 .pixclock       = KHZ2PICOS(25175),
 620                 .left_margin    = 114,
 621                 .hsync_len      = 30,
 622                 .right_margin   = 16,
 623                 .upper_margin   = 32,
 624                 .vsync_len      = 3,
 625                 .lower_margin   = 10,
 626                 .sync           = FB_SYNC_CLK_LAT_FALL,
 627         },
 628         {
 629                 /* Emerging ET0350G0DH6 320 x 240 display.
 630                  * 70.08 mm x 52.56 mm display area.
 631                  */
 632                 .name           = "ET0350",
 633                 .refresh        = 60,
 634                 .xres           = 320,
 635                 .yres           = 240,
 636                 .pixclock       = KHZ2PICOS(6500),
 637                 .left_margin    = 68 - 34,
 638                 .hsync_len      = 34,
 639                 .right_margin   = 20,
 640                 .upper_margin   = 18 - 3,
 641                 .vsync_len      = 3,
 642                 .lower_margin   = 4,
 643                 .sync           = FB_SYNC_CLK_LAT_FALL,
 644         },
 645         {
 646                 /* Emerging ET0430G0DH6 480 x 272 display.
 647                  * 95.04 mm x 53.856 mm display area.
 648                  */
 649                 .name           = "ET0430",
 650                 .refresh        = 60,
 651                 .xres           = 480,
 652                 .yres           = 272,
 653                 .pixclock       = KHZ2PICOS(9000),
 654                 .left_margin    = 2,
 655                 .hsync_len      = 41,
 656                 .right_margin   = 2,
 657                 .upper_margin   = 2,
 658                 .vsync_len      = 10,
 659                 .lower_margin   = 2,
 660                 .sync           = FB_SYNC_CLK_LAT_FALL,
 661         },
 662         {
 663                 /* Emerging ET0500G0DH6 800 x 480 display.
 664                  * 109.6 mm x 66.4 mm display area.
 665                  */
 666                 .name           = "ET0500",
 667                 .refresh        = 60,
 668                 .xres           = 800,
 669                 .yres           = 480,
 670                 .pixclock       = KHZ2PICOS(33260),
 671                 .left_margin    = 216 - 128,
 672                 .hsync_len      = 128,
 673                 .right_margin   = 1056 - 800 - 216,
 674                 .upper_margin   = 35 - 2,
 675                 .vsync_len      = 2,
 676                 .lower_margin   = 525 - 480 - 35,
 677                 .sync           = FB_SYNC_CLK_LAT_FALL,
 678         },
 679         {
 680                 /* Emerging ETQ570G0DH6 320 x 240 display.
 681                  * 115.2 mm x 86.4 mm display area.
 682                  */
 683                 .name           = "ETQ570",
 684                 .refresh        = 60,
 685                 .xres           = 320,
 686                 .yres           = 240,
 687                 .pixclock       = KHZ2PICOS(6400),
 688                 .left_margin    = 38,
 689                 .hsync_len      = 30,
 690                 .right_margin   = 30,
 691                 .upper_margin   = 16, /* 15 according to datasheet */
 692                 .vsync_len      = 3, /* TVP -> 1>x>5 */
 693                 .lower_margin   = 4, /* 4.5 according to datasheet */
 694                 .sync           = FB_SYNC_CLK_LAT_FALL,
 695         },
 696         {
 697                 /* Emerging ET0700G0DH6 800 x 480 display.
 698                  * 152.4 mm x 91.44 mm display area.
 699                  */
 700                 .name           = "ET0700",
 701                 .refresh        = 60,
 702                 .xres           = 800,
 703                 .yres           = 480,
 704                 .pixclock       = KHZ2PICOS(33260),
 705                 .left_margin    = 216 - 128,
 706                 .hsync_len      = 128,
 707                 .right_margin   = 1056 - 800 - 216,
 708                 .upper_margin   = 35 - 2,
 709                 .vsync_len      = 2,
 710                 .lower_margin   = 525 - 480 - 35,
 711                 .sync           = FB_SYNC_CLK_LAT_FALL,
 712         },
 713         {
 714                 /* unnamed entry for assigning parameters parsed from 'video_mode' string */
 715                 .refresh        = 60,
 716                 .left_margin    = 48,
 717                 .hsync_len      = 96,
 718                 .right_margin   = 16,
 719                 .upper_margin   = 31,
 720                 .vsync_len      = 2,
 721                 .lower_margin   = 12,
 722                 .sync           = FB_SYNC_CLK_LAT_FALL,
 723         },
 724 };
 725
 726 static int lcd_enabled = 1;
 727
 728 void lcd_enable(void)
 729 {
 730         /* HACK ALERT:
 731          * global variable from common/lcd.c
 732          * Set to 0 here to prevent messages from going to LCD
 733          * rather than serial console
 734          */
 735         lcd_is_enabled = 0;
 736
 737         karo_load_splashimage(1);
 738
 739         if (lcd_enabled) {
 740                 debug("Switching LCD on\n");
 741                 gpio_set_value(TX6_LCD_PWR_GPIO, 1);
 742                 udelay(100);
 743                 gpio_set_value(TX6_LCD_RST_GPIO, 1);
 744                 udelay(300000);
 745                 gpio_set_value(TX6_LCD_BACKLIGHT_GPIO, 0);
 746         }
 747 }
 748
 749 void lcd_disable(void)
 750 {
 751         if (lcd_enabled) {
 752                 printf("Disabling LCD\n");
 753                 ipuv3_fb_shutdown();
 754         }
 755 }
 756
 757 void lcd_panel_disable(void)
 758 {
 759         if (lcd_enabled) {
 760                 debug("Switching LCD off\n");
 761                 gpio_set_value(TX6_LCD_BACKLIGHT_GPIO, 1);
 762                 gpio_set_value(TX6_LCD_RST_GPIO, 0);
 763                 gpio_set_value(TX6_LCD_PWR_GPIO, 0);
 764         }
 765 }
 766
 767 static const iomux_v3_cfg_t stk5_lcd_pads[] = {
 768         /* LCD RESET */
 769         MX6_PAD_EIM_D29__GPIO_3_29,
 770         /* LCD POWER_ENABLE */
 771         MX6_PAD_EIM_EB3__GPIO_2_31,
 772         /* LCD Backlight (PWM) */
 773         MX6_PAD_GPIO_1__GPIO_1_1,
 774
 775         /* Display */
 776         MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
 777         MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
 778         MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2,
 779         MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3,
 780         MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
 781         MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
 782         MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
 783         MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
 784         MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
 785         MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
 786         MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
 787         MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
 788         MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
 789         MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
 790         MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
 791         MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
 792         MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
 793         MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
 794         MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
 795         MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
 796         MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
 797         MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
 798         MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
 799         MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
 800         MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
 801         MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
 802         MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
 803         MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
 804 };
 805
 806 static const struct gpio stk5_lcd_gpios[] = {
 807         { TX6_LCD_RST_GPIO, GPIOF_OUTPUT_INIT_LOW, "LCD RESET", },
 808         { TX6_LCD_PWR_GPIO, GPIOF_OUTPUT_INIT_LOW, "LCD POWER", },
 809         { TX6_LCD_BACKLIGHT_GPIO, GPIOF_OUTPUT_INIT_HIGH, "LCD BACKLIGHT", },
 810 };
 811
 812 void lcd_ctrl_init(void *lcdbase)
 813 {
 814         int color_depth = 24;
 815         char *vm;
 816         unsigned long val;
 817         int refresh = 60;
 818         struct fb_videomode *p = &tx6_fb_modes[0];
 819         struct fb_videomode fb_mode;
 820         int xres_set = 0, yres_set = 0, bpp_set = 0, refresh_set = 0;
 821         int pix_fmt = 0;
 822         ipu_di_clk_parent_t di_clk_parent = DI_PCLK_PLL3;
 823         unsigned long di_clk_rate = 65000000;
 824
 825         if (!lcd_enabled) {
 826                 debug("LCD disabled\n");
 827                 return;
 828         }
 829
 830         if (tstc() || (wrsr & WRSR_TOUT)) {
 831                 debug("Disabling LCD\n");
 832                 lcd_enabled = 0;
 833                 return;
 834         }
 835
 836         karo_fdt_move_fdt();
 837
 838         vm = getenv("video_mode");
 839         if (vm == NULL) {
 840                 debug("Disabling LCD\n");
 841                 lcd_enabled = 0;
 842                 return;
 843         }
 844         if (karo_fdt_get_fb_mode(working_fdt, vm, &fb_mode) == 0) {
 845                 p = &fb_mode;
 846                 debug("Using video mode from FDT\n");
 847                 vm += strlen(vm);
 848                 if (fb_mode.xres < panel_info.vl_col)
 849                         panel_info.vl_col = fb_mode.xres;
 850                 if (fb_mode.yres < panel_info.vl_row)
 851                         panel_info.vl_row = fb_mode.yres;
 852         }
 853         if (p->name != NULL)
 854                 debug("Trying compiled-in video modes\n");
 855         while (p->name != NULL) {
 856                 if (strcmp(p->name, vm) == 0) {
 857                         debug("Using video mode: '%s'\n", p->name);
 858                         vm += strlen(vm);
 859                         break;
 860                 }
 861                 p++;
 862         }
 863         if (*vm != '\0')
 864                 debug("Trying to decode video_mode: '%s'\n", vm);
 865         while (*vm != '\0') {
 866                 if (*vm >= '0' && *vm <= '9') {
 867                         char *end;
 868
 869                         val = simple_strtoul(vm, &end, 0);
 870                         if (end > vm) {
 871                                 if (!xres_set) {
 872                                         if (val > panel_info.vl_col)
 873                                                 val = panel_info.vl_col;
 874                                         p->xres = val;
 875                                         panel_info.vl_col = val;
 876                                         xres_set = 1;
 877                                 } else if (!yres_set) {
 878                                         if (val > panel_info.vl_row)
 879                                                 val = panel_info.vl_row;
 880                                         p->yres = val;
 881                                         panel_info.vl_row = val;
 882                                         yres_set = 1;
 883                                 } else if (!bpp_set) {
 884                                         switch (val) {
 885                                         case 32:
 886                                         case 24:
 887                                                 if (pix_fmt == IPU_PIX_FMT_LVDS666)
 888                                                         pix_fmt = IPU_PIX_FMT_LVDS888;
 889                                                 /* fallthru */
 890                                         case 16:
 891                                         case 8:
 892                                                 color_depth = val;
 893                                                 break;
 894
 895                                         case 18:
 896                                                 if (pix_fmt == IPU_PIX_FMT_LVDS666) {
 897                                                         color_depth = val;
 898                                                         break;
 899                                                 }
 900                                                 /* fallthru */
 901                                         default:
 902                                                 printf("Invalid color depth: '%.*s' in video_mode; using default: '%u'\n",
 903                                                         end - vm, vm, color_depth);
 904                                         }
 905                                         bpp_set = 1;
 906                                 } else if (!refresh_set) {
 907                                         refresh = val;
 908                                         refresh_set = 1;
 909                                 }
 910                         }
 911                         vm = end;
 912                 }
 913                 switch (*vm) {
 914                 case '@':
 915                         bpp_set = 1;
 916                         /* fallthru */
 917                 case '-':
 918                         yres_set = 1;
 919                         /* fallthru */
 920                 case 'x':
 921                         xres_set = 1;
 922                         /* fallthru */
 923                 case 'M':
 924                 case 'R':
 925                         vm++;
 926                         break;
 927
 928                 default:
 929                         if (!pix_fmt) {
 930                                 char *tmp;
 931
 932                                 if (strncmp(vm, "LVDS", 4) == 0) {
 933                                         pix_fmt = IPU_PIX_FMT_LVDS666;
 934                                         di_clk_parent = DI_PCLK_LDB;
 935                                 } else {
 936                                         pix_fmt = IPU_PIX_FMT_RGB24;
 937                                 }
 938                                 tmp = strchr(vm, ':');
 939                                 if (tmp)
 940                                         vm = tmp;
 941                         }
 942                         if (*vm != '\0')
 943                                 vm++;
 944                 }
 945         }
 946         if (p->xres == 0 || p->yres == 0) {
 947                 printf("Invalid video mode: %s\n", getenv("video_mode"));
 948                 lcd_enabled = 0;
 949                 printf("Supported video modes are:");
 950                 for (p = &tx6_fb_modes[0]; p->name != NULL; p++) {
 951                         printf(" %s", p->name);
 952                 }
 953                 printf("\n");
 954                 return;
 955         }
 956
 957         p->pixclock = KHZ2PICOS(refresh *
 958                 (p->xres + p->left_margin + p->right_margin + p->hsync_len) *
 959                 (p->yres + p->upper_margin + p->lower_margin + p->vsync_len)
 960                 / 1000);
 961         debug("Pixel clock set to %lu.%03lu MHz\n",
 962                 PICOS2KHZ(p->pixclock) / 1000,
 963                 PICOS2KHZ(p->pixclock) % 1000);
 964
 965         if (p != &fb_mode) {
 966                 int ret;
 967                 char *modename = getenv("video_mode");
 968
 969                 printf("Creating new display-timing node from '%s'\n",
 970                         modename);
 971                 ret = karo_fdt_create_fb_mode(working_fdt, modename, p);
 972                 if (ret)
 973                         printf("Failed to create new display-timing node from '%s': %d\n",
 974                                 modename, ret);
 975         }
 976
 977         gpio_request_array(stk5_lcd_gpios, ARRAY_SIZE(stk5_lcd_gpios));
 978         imx_iomux_v3_setup_multiple_pads(stk5_lcd_pads,
 979                                         ARRAY_SIZE(stk5_lcd_pads));
 980
 981         debug("Initializing FB driver\n");
 982         if (!pix_fmt)
 983                 pix_fmt = IPU_PIX_FMT_RGB24;
 984         else if (pix_fmt == IPU_PIX_FMT_LVDS666) {
 985                 writel(0x01, IOMUXC_BASE_ADDR + 8);
 986         } else if (pix_fmt == IPU_PIX_FMT_LVDS888) {
 987                 writel(0x21, IOMUXC_BASE_ADDR + 8);
 988         }
 989         if (pix_fmt != IPU_PIX_FMT_RGB24) {
 990                 struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 991                 /* enable LDB & DI0 clock */
 992                 writel(readl(&ccm_regs->CCGR3) | MXC_CCM_CCGR3_LDB_DI0_MASK |
 993                         MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK,
 994                         &ccm_regs->CCGR3);
 995         }
 996
 997         if (karo_load_splashimage(0) == 0) {
 998                 debug("Initializing LCD controller\n");
 999                 ipuv3_fb_init(p, 0, pix_fmt, di_clk_parent, di_clk_rate, -1);
1000         } else {
1001                 debug("Skipping initialization of LCD controller\n");
1002         }
1003 }
1004 #else
1005 #define lcd_enabled 0
1006 #endif /* CONFIG_LCD */
1007
1008 static void stk5_board_init(void)
1009 {
1010         gpio_request_array(stk5_gpios, ARRAY_SIZE(stk5_gpios));
1011         imx_iomux_v3_setup_multiple_pads(stk5_pads, ARRAY_SIZE(stk5_pads));
1012 }
1013
1014 static void stk5v3_board_init(void)
1015 {
1016         stk5_board_init();
1017 }
1018
1019 static void stk5v5_board_init(void)
1020 {
1021         stk5_board_init();
1022
1023         gpio_request_one(IMX_GPIO_NR(4, 21), GPIOF_OUTPUT_INIT_HIGH,
1024                         "Flexcan Transceiver");
1025         imx_iomux_v3_setup_pad(MX6_PAD_DISP0_DAT0__GPIO_4_21);
1026 }
1027
1028 static void tx6qdl_set_cpu_clock(void)
1029 {
1030         unsigned long cpu_clk = getenv_ulong("cpu_clk", 10, 0);
1031
1032         if (tstc() || (wrsr & WRSR_TOUT))
1033                 return;
1034
1035         if (cpu_clk == 0 || cpu_clk == mxc_get_clock(MXC_ARM_CLK) / 1000000)
1036                 return;
1037
1038         if (mxc_set_clock(CONFIG_SYS_MX6_HCLK, cpu_clk, MXC_ARM_CLK) == 0) {
1039                 cpu_clk = mxc_get_clock(MXC_ARM_CLK);
1040                 printf("CPU clock set to %lu.%03lu MHz\n",
1041                         cpu_clk / 1000000, cpu_clk / 1000 % 1000);
1042         } else {
1043                 printf("Failed to set CPU clock to %lu MHz\n", cpu_clk);
1044         }
1045 }
1046
1047 static void tx6_init_mac(void)
1048 {
1049         u8 mac[ETH_ALEN];
1050
1051         imx_get_mac_from_fuse(-1, mac);
1052         if (!is_valid_ether_addr(mac)) {
1053                 printf("No valid MAC address programmed\n");
1054                 return;
1055         }
1056
1057         eth_setenv_enetaddr("ethaddr", mac);
1058         printf("MAC addr from fuse: %pM\n", mac);
1059 }
1060
1061 int board_late_init(void)
1062 {
1063         int ret = 0;
1064         const char *baseboard;
1065
1066         tx6qdl_set_cpu_clock();
1067         karo_fdt_move_fdt();
1068
1069         baseboard = getenv("baseboard");
1070         if (!baseboard)
1071                 goto exit;
1072
1073         printf("Baseboard: %s\n", baseboard);
1074
1075         if (strncmp(baseboard, "stk5", 4) == 0) {
1076                 if ((strlen(baseboard) == 4) ||
1077                         strcmp(baseboard, "stk5-v3") == 0) {
1078                         stk5v3_board_init();
1079                 } else if (strcmp(baseboard, "stk5-v5") == 0) {
1080                         const char *otg_mode = getenv("otg_mode");
1081
1082                         if (otg_mode && strcmp(otg_mode, "host") == 0) {
1083                                 printf("otg_mode='%s' is incompatible with baseboard %s; setting to 'none'\n",
1084                                         otg_mode, baseboard);
1085                                 setenv("otg_mode", "none");
1086                         }
1087                         stk5v5_board_init();
1088                 } else {
1089                         printf("WARNING: Unsupported STK5 board rev.: %s\n",
1090                                 baseboard + 4);
1091                 }
1092         } else {
1093                 printf("WARNING: Unsupported baseboard: '%s'\n",
1094                         baseboard);
1095                 ret = -EINVAL;
1096         }
1097
1098 exit:
1099         tx6_init_mac();
1100
1101         gpio_set_value(TX6_RESET_OUT_GPIO, 1);
1102         return ret;
1103 }
1104
1105 int checkboard(void)
1106 {
1107         u32 cpurev = get_cpu_rev();
1108         int cpu_variant = (cpurev >> 12) & 0xff;
1109
1110         tx6qdl_print_cpuinfo();
1111
1112         printf("Board: Ka-Ro TX6%c-%dxx%d\n",
1113                 cpu_variant == MXC_CPU_MX6Q ? 'Q' : 'U',
1114                 cpu_variant == MXC_CPU_MX6Q ? 1 : 8,
1115                 1 - PHYS_SDRAM_1_WIDTH / 64);
1116
1117         return 0;
1118 }
1119
1120 #ifdef CONFIG_SERIAL_TAG
1121 void get_board_serial(struct tag_serialnr *serialnr)
1122 {
1123         struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
1124         struct fuse_bank0_regs *fuse = (void *)ocotp->bank[0].fuse_regs;
1125
1126         serialnr->low = readl(&fuse->cfg0);
1127         serialnr->high = readl(&fuse->cfg1);
1128 }
1129 #endif
1130
1131 #if defined(CONFIG_OF_BOARD_SETUP)
1132 #ifdef CONFIG_FDT_FIXUP_PARTITIONS
1133 #include <jffs2/jffs2.h>
1134 #include <mtd_node.h>
1135 struct node_info nodes[] = {
1136         { "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, },
1137 };
1138
1139 #else
1140 #define fdt_fixup_mtdparts(b,n,c) do { } while (0)
1141 #endif
1142
1143 static int flexcan_enabled(void *blob)
1144 {
1145         const char *can_ifs[] = {
1146                 "can0",
1147                 "can1",
1148         };
1149         size_t i;
1150
1151         for (i = 0; i < ARRAY_SIZE(can_ifs); i++) {
1152                 const char *status;
1153                 int off = fdt_path_offset(blob, can_ifs[i]);
1154
1155                 if (off < 0) {
1156                         debug("node '%s' not found\n", can_ifs[i]);
1157                         continue;
1158                 }
1159                 status = fdt_getprop(blob, off, "status", NULL);
1160                 if (strcmp(status, "okay") == 0) {
1161                         debug("%s is enabled\n", can_ifs[i]);
1162                         return 1;
1163                 }
1164         }
1165         debug("can driver is disabled\n");
1166         return 0;
1167 }
1168
1169 static void tx6qdl_set_lcd_pins(void *blob, const char *name)
1170 {
1171         int off = fdt_path_offset(blob, name);
1172         u32 ph;
1173         const struct fdt_property *pc;
1174         int len;
1175
1176         if (off < 0)
1177                 return;
1178
1179         ph = fdt_create_phandle(blob, off);
1180         if (!ph)
1181                 return;
1182
1183         off = fdt_path_offset(blob, "display");
1184         if (off < 0)
1185                 return;
1186
1187         pc = fdt_get_property(blob, off, "pinctrl-0", &len);
1188         if (!pc || len < sizeof(ph))
1189                 return;
1190
1191         memcpy((void *)pc->data, &ph, sizeof(ph));
1192         fdt_setprop_cell(blob, off, "pinctrl-0", ph);
1193 }
1194
1195 static void tx6qdl_fixup_flexcan(void *blob, int stk5_v5)
1196 {
1197         const char *xcvr_status = "disabled";
1198
1199         if (stk5_v5) {
1200                 if (flexcan_enabled(blob)) {
1201                         tx6qdl_set_lcd_pins(blob, "lcdif_23bit_pins_a");
1202                         xcvr_status = "okay";
1203                 } else {
1204                         tx6qdl_set_lcd_pins(blob, "lcdif_24bit_pins_a");
1205                 }
1206         } else {
1207                 const char *otg_mode = getenv("otg_mode");
1208
1209                 if (otg_mode && (strcmp(otg_mode, "host") == 0))
1210                         karo_fdt_enable_node(blob, "can1", 0);
1211
1212                 tx6qdl_set_lcd_pins(blob, "lcdif_24bit_pins_a");
1213         }
1214         fdt_find_and_setprop(blob, "/regulators/can-xcvr", "status",
1215                         xcvr_status, strlen(xcvr_status) + 1, 1);
1216 }
1217
1218 void ft_board_setup(void *blob, bd_t *bd)
1219 {
1220         const char *baseboard = getenv("baseboard");
1221         int stk5_v5 = baseboard != NULL && (strcmp(baseboard, "stk5-v5") == 0);
1222
1223         karo_fdt_enable_node(blob, "stk5led", !stk5_v5);
1224
1225         fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
1226         fdt_fixup_ethernet(blob);
1227
1228         karo_fdt_fixup_touchpanel(blob);
1229         karo_fdt_fixup_usb_otg(blob, "usbotg", "fsl,usbphy");
1230         tx6qdl_fixup_flexcan(blob, stk5_v5);
1231         karo_fdt_update_fb_mode(blob, getenv("video_mode"));
1232 }
1233 #endif