board/modnet50/flash.c

   1 /*
   2  * (C) Copyright 2002
   3  * MAZeT GmbH <www.mazet.de>
   4  * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
   5  *
   6  * The most stuff comes from PPCBoot and Linux.
   7  *
   8  * IMMS gGmbH <www.imms.de>
   9  * Thomas Elste <info@elste.org>
  10  *
  11  * Modifications for ModNET50 Board
  12  *
  13  * See file CREDITS for list of people who contributed to this
  14  * project.
  15  *
  16  * This program is free software; you can redistribute it and/or
  17  * modify it under the terms of the GNU General Public License as
  18  * published by the Free Software Foundation; either version 2 of
  19  * the License, or (at your option) any later version.
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24  * GNU General Public License for more details.
  25  *
  26  * You should have received a copy of the GNU General Public License
  27  * along with this program; if not, write to the Free Software
  28  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  29  * MA 02111-1307 USA
  30  */
  31
  32 #include <common.h>
  33 #include <asm/arch/netarm_registers.h>
  34
  35 #define SCR   (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_SYSTEM_CONTROL))
  36
  37 #define ALIGN_ABORT_OFF         SCR = SCR & ~NETARM_GEN_SYS_CFG_ALIGN_ABORT
  38 #define ALIGN_ABORT_ON          SCR = SCR |  NETARM_GEN_SYS_CFG_ALIGN_ABORT
  39
  40 #define PROG_ADDR               (0x555*2)
  41 #define SETUP_ADDR              (0x555*2)
  42 #define ID_ADDR                 (0x555*2)
  43 #define UNLOCK_ADDR1            (0x555*2)
  44 #define UNLOCK_ADDR2            (0x2AA*2)
  45
  46 #define UNLOCK_CMD1             (0xAA)
  47 #define UNLOCK_CMD2             (0x55)
  48 #define ERASE_SUSPEND_CMD       (0xB0)
  49 #define ERASE_RESUME_CMD        (0x30)
  50 #define RESET_CMD               (0xF0)
  51 #define ID_CMD                  (0x90)
  52 #define SECERASE_CMD            (0x30)
  53 #define CHIPERASE_CMD           (0x10)
  54 #define PROG_CMD                (0xa0)
  55 #define SETUP_CMD               (0x80)
  56
  57 #define DQ2                     (0x04)
  58 #define DQ3                     (DQ2*2)
  59 #define DQ5                     (DQ3*4)
  60 #define DQ6                     (DQ5*2)
  61
  62 #define WRITE_UNLOCK(addr) { \
  63   *(volatile __u16*)(addr + UNLOCK_ADDR1) = (__u16)UNLOCK_CMD1; \
  64   *(volatile __u16*)(addr + UNLOCK_ADDR2) = (__u16)UNLOCK_CMD2; \
  65 }
  66
  67 #define CONFIG_AM29_RESERVED    (0)
  68 #define K                       (1024)
  69 #define MB                      (4)
  70
  71 #define CELL_SIZE               (64*K)
  72 #define DEVICE_SIZE             (MB*K*K)
  73 #define CELLS_PER_DEVICE        (DEVICE_SIZE/CELL_SIZE)
  74 #define RESERVED_CELLS          (CONFIG_AM29_RESERVED*K)/CELL_SIZE
  75 #define MAX_FLASH_DEVICES       (1)
  76 #define AVAIL_SIZE              (DEVICE_SIZE*MAX_FLASH_DEVICES - RESERVED_CELLS*CELL_SIZE)
  77
  78
  79 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
  80 static __u16 toggling_bits;
  81
  82
  83 /*-----------------------------------------------------------------------
  84  */
  85 ulong flash_get_size (ulong baseaddr, flash_info_t * info)
  86 {
  87         short i;
  88         __u16 flashtest;
  89
  90         /* Write auto select command sequence and test FLASH answer */
  91         WRITE_UNLOCK (baseaddr);
  92         *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
  93         flashtest /* manufacturer ID */  = *(volatile __u16 *) (baseaddr);
  94         *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
  95
  96         switch ((__u32) ((flashtest << 16) + flashtest)) {
  97         case AMD_MANUFACT:
  98                 info->flash_id = FLASH_MAN_AMD & FLASH_VENDMASK;
  99                 break;
 100         case FUJ_MANUFACT:
 101                 info->flash_id = FLASH_MAN_FUJ & FLASH_VENDMASK;
 102                 break;
 103         default:
 104                 info->flash_id = FLASH_UNKNOWN;
 105                 info->sector_count = 0;
 106                 info->size = 0;
 107                 return (0);     /* no or unknown flash */
 108         }
 109
 110         /* Write auto select command sequence and test FLASH answer */
 111         WRITE_UNLOCK (baseaddr);
 112         *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) ID_CMD;
 113         flashtest /* device ID */  = *(volatile __u16 *) (baseaddr + 2);
 114         *(volatile __u16 *) (baseaddr + ID_ADDR) = (__u16) RESET_CMD;
 115
 116         /* toggling_bits = (flashtest == TOSHIBA)?(DQ6):(DQ2|DQ6); */
 117         toggling_bits = (DQ2 | DQ6);
 118
 119         switch ((__u32) ((flashtest << 16) + flashtest)) {
 120         case AMD_ID_LV160B:
 121                 info->flash_id +=
 122                         (FLASH_AM160LV | FLASH_AM160B) & FLASH_TYPEMASK;
 123                 info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 124                 info->size = CONFIG_SYS_FLASH_SIZE;
 125                 /* 1*16K Boot Block
 126                    2*8K Parameter Block
 127                    1*32K Small Main Block */
 128                 info->start[0] = baseaddr;
 129                 info->start[1] = baseaddr + 0x4000;
 130                 info->start[2] = baseaddr + 0x6000;
 131                 info->start[3] = baseaddr + 0x8000;
 132                 for (i = 1; i < info->sector_count; i++)
 133                         info->start[3 + i] = baseaddr + i * CONFIG_SYS_MAIN_SECT_SIZE;
 134                 break;
 135         default:
 136                 info->flash_id = FLASH_UNKNOWN;
 137                 return (0);     /* no or unknown flash */
 138         }
 139
 140         for (i = 0; i < info->sector_count; i++) {
 141                 /* Write auto select command sequence and test FLASH answer */
 142                 WRITE_UNLOCK (info->start[i]);
 143                 *(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) ID_CMD;
 144                 flashtest /* protected verify */  = *(volatile __u16 *) (info->start[i] + 4);
 145                 *(volatile __u16 *) (info->start[i] + ID_ADDR) = (__u16) RESET_CMD;
 146                 if (flashtest & 0x0001) {
 147                         info->protect[i] = 1;   /* D0 = 1 if protected */
 148                 } else {
 149                         info->protect[i] = 0;
 150                 }
 151         }
 152         return (info->size);
 153 }
 154
 155 /*-----------------------------------------------------------------------
 156  */
 157 ulong flash_init (void)
 158 {
 159         ulong size = 0;
 160         int i;
 161
 162         /* Init: no FLASHes known */
 163         for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 164                 flash_info[i].flash_id = FLASH_UNKNOWN;
 165         }
 166
 167         /* Static FLASH Bank configuration here (only one bank) */
 168         size = flash_get_size (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
 169
 170         if (flash_info[0].flash_id == FLASH_UNKNOWN || size == 0) {
 171                 printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
 172                         size, size >> 20);
 173         }
 174
 175         /*
 176          * protect monitor and environment sectors
 177          */
 178         flash_protect (FLAG_PROTECT_SET,
 179                        CONFIG_SYS_FLASH_BASE,
 180                        CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 181                        &flash_info[0]);
 182
 183         flash_protect (FLAG_PROTECT_SET,
 184                        CONFIG_ENV_ADDR,
 185                        CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
 186
 187         return size;
 188 }
 189
 190 /*-----------------------------------------------------------------------
 191  */
 192 void flash_print_info (flash_info_t * info)
 193 {
 194         int i;
 195
 196         if (info->flash_id == FLASH_UNKNOWN) {
 197                 printf ("missing or unknown FLASH type\n");
 198                 return;
 199         }
 200
 201         switch (info->flash_id & FLASH_VENDMASK) {
 202         case FLASH_MAN_AMD:
 203                 printf ("AMD ");
 204                 break;
 205         case FLASH_MAN_FUJ:
 206                 printf ("Fujitsu ");
 207                 break;
 208         default:
 209                 printf ("Unknown Vendor ");
 210                 break;
 211         }
 212
 213         switch (info->flash_id & FLASH_TYPEMASK) {
 214         case FLASH_AMDL323B:
 215                 printf ("29DL323B (32 M, bottom sector)\n");
 216                 break;
 217         case (FLASH_AM160LV | FLASH_AM160B):
 218                 printf ("29LV160BE (1M x 16, bottom sector)\n");
 219                 break;
 220         default:
 221                 printf ("Unknown Chip Type\n");
 222                 break;
 223         }
 224
 225         printf ("  Size: %ld MB in %d Sectors\n",
 226                 info->size >> 20, info->sector_count);
 227         printf ("  Sector Start Addresses:");
 228         for (i = 0; i < info->sector_count; i++) {
 229                 if ((i % 4) == 0)
 230                         printf ("\n   ");
 231                 printf (" S%02d @ 0x%08lX%s", i,
 232                         info->start[i], info->protect[i] ? " !" : "  ");
 233         }
 234         printf ("\n");
 235         return;
 236 }
 237
 238 /*-----------------------------------------------------------------------
 239  */
 240 int flash_check_protection (flash_info_t * info, int s_first, int s_last)
 241 {
 242         int sect, prot = 0;
 243
 244         for (sect = s_first; sect <= s_last; sect++)
 245                 if (info->protect[sect])
 246                         prot++;
 247         if (prot)
 248                 printf ("- can't erase %d protected sectors\n", prot);
 249         return prot;
 250 }
 251
 252 /*-----------------------------------------------------------------------
 253  */
 254 int flash_check_erase_amd (ulong start)
 255 {
 256         __u16 v1, v2;
 257
 258         v1 = *(volatile __u16 *) (start);
 259         v2 = *(volatile __u16 *) (start);
 260
 261         if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
 262                 if (((v1 | v2) & DQ5) == DQ5) {
 263                         printf ("[DQ5] ");
 264                         /* OOPS: exceeded timing limits */
 265
 266                         v1 = *(volatile __u16 *) (start);
 267                         v2 = *(volatile __u16 *) (start);
 268
 269                         if (((v1 ^ v2) & toggling_bits) == toggling_bits) {
 270
 271                                 printf ("[%s] ",
 272                                         ((toggling_bits & (DQ2 | DQ6)) ==
 273                                          (DQ2 | DQ6)) ? "DQ2,DQ6" : "DQ6");
 274
 275                                 /* OOPS: there is an erasure in progress,
 276                                  *       try to reset chip */
 277                                 *(volatile __u16 *) (start) =
 278                                         (__u16) RESET_CMD;
 279
 280                                 return 1;       /* still busy */
 281                         }
 282                 }
 283                 return 1;       /* still busy */
 284         }
 285         return 0;               /* be free */
 286 }
 287
 288 /*-----------------------------------------------------------------------
 289  */
 290 int flash_erase (flash_info_t * info, int s_first, int s_last)
 291 {
 292         int flag, sect, setup_offset = 0;
 293         int rc = ERR_OK;
 294
 295         if (info->flash_id == FLASH_UNKNOWN) {
 296                 printf ("- missing\n");
 297                 return ERR_UNKNOWN_FLASH_TYPE;
 298         }
 299
 300         if ((s_first < 0) || (s_first > s_last)) {
 301                 printf ("- no sectors to erase\n");
 302                 return ERR_INVAL;
 303         }
 304
 305         if (flash_check_protection (info, s_first, s_last))
 306                 return ERR_PROTECTED;
 307
 308         switch (info->flash_id & FLASH_VENDMASK) {
 309         case FLASH_MAN_FUJ:
 310         case FLASH_MAN_AMD:
 311                 switch (info->flash_id & FLASH_TYPEMASK) {
 312                 case (FLASH_AM160LV | FLASH_AM160B):
 313                         setup_offset = UNLOCK_ADDR1;    /* just the adress for setup_cmd differs */
 314                 case FLASH_AMDL323B:
 315                         /*
 316                          * Disable interrupts which might cause a timeout
 317                          * here. Remember that our exception vectors are
 318                          * at address 0 in the flash, and we don't want a
 319                          * (ticker) exception to happen while the flash
 320                          * chip is in programming mode.
 321                          */
 322                         flag = disable_interrupts ();
 323                         /* Start erase on unprotected sectors */
 324                         for (sect = s_first; sect <= s_last && !ctrlc ();
 325                              sect++) {
 326                                 printf ("Erasing sector %2d ... ", sect);
 327
 328                                 if (info->protect[sect] == 0) {
 329                                         /* not protected */
 330                                         /* Write sector erase command sequence */
 331                                         WRITE_UNLOCK (info->start[0]);
 332                                         *(volatile __u16 *) (info->start[0] +
 333                                                              setup_offset) =
 334                                                 (__u16) SETUP_CMD;
 335                                         WRITE_UNLOCK (info->start[0]);
 336                                         *(volatile __u16 *) (info->
 337                                                              start[sect]) =
 338                                                 (__u16) SECERASE_CMD;
 339
 340                                         /* wait some time */
 341                                         reset_timer_masked ();
 342                                         while (get_timer_masked () < 1000) {
 343                                         }
 344
 345                                         /* arm simple, non interrupt dependent timer */
 346                                         reset_timer_masked ();
 347                                         while (flash_check_erase_amd (info->start[sect])) {
 348                                                 if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) {
 349                                                         printf ("timeout!\n");
 350                                                         /* OOPS: reach timeout,
 351                                                          * try to reset chip
 352                                                          */
 353                                                         *(volatile __u16 *) (info-> start[sect]) = (__u16) RESET_CMD;
 354                                                         rc = ERR_TIMOUT;
 355                                                         goto outahere_323B;
 356                                                 }
 357                                         }
 358                                         printf ("ok.\n");
 359                                 } else {
 360                                         printf ("protected!\n");
 361                                 }
 362                         }
 363                         if (ctrlc ())
 364                                 printf ("User Interrupt!\n");
 365 outahere_323B:
 366                         /* allow flash to settle - wait 10 ms */
 367                         udelay_masked (10000);
 368                         if (flag)
 369                                 enable_interrupts ();
 370                         return rc;
 371                 default:
 372                         printf ("- unknown chip type\n");
 373                         return ERR_UNKNOWN_FLASH_TYPE;
 374                 }
 375                 break;
 376         default:
 377                 printf ("- unknown vendor ");
 378                 return ERR_UNKNOWN_FLASH_VENDOR;
 379         }
 380 }
 381
 382 /*-----------------------------------------------------------------------
 383  */
 384 int flash_check_write_amd (ulong dest)
 385 {
 386         __u16 v1, v2;
 387
 388         v1 = *(volatile __u16 *) (dest);
 389         v2 = *(volatile __u16 *) (dest);
 390
 391         /* DQ6 toggles during write */
 392         if (((v1 ^ v2) & DQ6) == DQ6) {
 393                 if (((v1 | v2) & DQ5) == DQ5) {
 394                         printf ("[DQ5] @ %08lX\n", dest);
 395
 396                         /* OOPS: exceeded timing limits,
 397                          *       try to reset chip */
 398                         *(volatile __u16 *) (dest) = (__u16) RESET_CMD;
 399                         return 0;       /* be free */
 400                 }
 401                 return 1;       /* still busy */
 402         }
 403
 404         return 0;               /* be free */
 405 }
 406
 407 /*-----------------------------------------------------------------------
 408  * Copy memory to flash
 409  */
 410 static int write_word (flash_info_t * info, ulong dest, ushort data)
 411 {
 412         int rc = ERR_OK;
 413         int flag;
 414
 415         /* Check if Flash is (sufficiently) erased */
 416         if ((*(__u16 *) (dest) & data) != data)
 417                 return ERR_NOT_ERASED;
 418
 419         /*
 420          * Disable interrupts which might cause a timeout
 421          * here. Remember that our exception vectors are
 422          * at address 0 in the flash, and we don't want a
 423          * (ticker) exception to happen while the flash
 424          * chip is in programming mode.
 425          */
 426         flag = disable_interrupts ();
 427
 428         /* Write program command sequence */
 429         WRITE_UNLOCK (info->start[0]);
 430
 431         /* Flash dependend program seqence */
 432         switch (info->flash_id & FLASH_VENDMASK) {
 433         case FLASH_MAN_FUJ:
 434         case FLASH_MAN_AMD:
 435                 switch (info->flash_id & FLASH_TYPEMASK) {
 436                 case (FLASH_AM160LV | FLASH_AM160B):
 437                         *(volatile __u16 *) (info->start[0] + UNLOCK_ADDR1) =
 438                                 (__u16) PROG_CMD;
 439                         *(volatile __u16 *) (dest) = (__u16) data;
 440                         break;
 441                 case FLASH_AMDL323B:
 442                         *(volatile __u16 *) (dest) = (__u16) PROG_CMD;
 443                         *(volatile __u16 *) (dest) = (__u16) data;
 444                         break;
 445                 }
 446         }
 447
 448         /* arm simple, non interrupt dependent timer */
 449         reset_timer_masked ();
 450
 451         while (flash_check_write_amd (dest)) {
 452                 if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) {
 453                         printf ("timeout! @ %08lX\n", dest);
 454                         /* OOPS: reach timeout,
 455                          *       try to reset chip */
 456                         *(volatile __u16 *) (dest) = (__u16) RESET_CMD;
 457
 458                         rc = ERR_TIMOUT;
 459                         goto outahere_323B;
 460                 }
 461         }
 462
 463         /* Check if Flash was (accurately) written */
 464         if (*(__u16 *) (dest) != data)
 465                 rc = ERR_PROG_ERROR;
 466
 467 outahere_323B:
 468         if (flag)
 469                 enable_interrupts ();
 470         return rc;
 471 }
 472
 473 /*-----------------------------------------------------------------------
 474  * Copy memory to flash.
 475  */
 476 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 477 {
 478         ulong cp, wp;
 479         ushort data;
 480         int l;
 481         int i, rc;
 482
 483         wp = (addr & ~1);       /* get lower word aligned address */
 484
 485         /*
 486          * handle unaligned start bytes
 487          */
 488         if ((l = addr - wp) != 0) {
 489                 data = 0;
 490                 for (i = 0, cp = wp; i < l; ++i, ++cp) {
 491                         data = (data >> 8) | (*(uchar *) cp << 8);
 492                 }
 493                 for (; i < 2 && cnt > 0; ++i) {
 494                         data = (data >> 8) | (*src++ << 8);
 495                         --cnt;
 496                         ++cp;
 497                 }
 498                 for (; cnt == 0 && i < 2; ++i, ++cp) {
 499                         data = (data >> 8) | (*(uchar *) cp << 8);
 500                 }
 501
 502                 if ((rc = write_word (info, wp, data)) != 0) {
 503                         return (rc);
 504                 }
 505                 wp += 2;
 506         }
 507
 508         /*
 509          * handle word aligned part
 510          */
 511         while (cnt >= 2) {
 512                 data = *((ushort *) src);
 513                 if ((rc = write_word (info, wp, data)) != 0)
 514                         return (rc);
 515                 src += 2;
 516                 wp += 2;
 517                 cnt -= 2;
 518         }
 519
 520         if (cnt == 0)
 521                 return ERR_OK;
 522
 523         /*
 524          * handle unaligned tail bytes
 525          */
 526         data = 0;
 527         for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
 528                 data = (data >> 8) | (*src++ << 8);
 529                 --cnt;
 530         }
 531         for (; i < 2; ++i, ++cp) {
 532                 data = (data >> 8) | (*(uchar *) cp << 8);
 533         }
 534
 535         return write_word (info, wp, data);
 536 }