]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/samsung/smdk5420/smdk5420.c
Merge branch 'master' of git://git.denx.de/u-boot-usb
[karo-tx-uboot.git] / board / samsung / smdk5420 / smdk5420.c
1 /*
2  * Copyright (C) 2013 Samsung Electronics
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #include <common.h>
8 #include <fdtdec.h>
9 #include <asm/io.h>
10 #include <i2c.h>
11 #include <lcd.h>
12 #include <spi.h>
13 #include <asm/arch/board.h>
14 #include <asm/arch/cpu.h>
15 #include <asm/arch/gpio.h>
16 #include <asm/arch/pinmux.h>
17 #include <asm/arch/dp_info.h>
18
19 DECLARE_GLOBAL_DATA_PTR;
20
21 #ifdef CONFIG_USB_EHCI_EXYNOS
22 static int board_usb_vbus_init(void)
23 {
24         /* Enable VBUS power switch */
25         gpio_direction_output(EXYNOS5420_GPIO_X26, 1);
26
27         /* VBUS turn ON time */
28         mdelay(3);
29
30         return 0;
31 }
32 #endif
33
34 int exynos_init(void)
35 {
36 #ifdef CONFIG_USB_EHCI_EXYNOS
37         board_usb_vbus_init();
38 #endif
39         return 0;
40 }
41
42 #ifdef CONFIG_LCD
43 void cfg_lcd_gpio(void)
44 {
45         /* For Backlight */
46         gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_OUTPUT);
47         gpio_set_value(EXYNOS5420_GPIO_B20, 1);
48
49         /* LCD power on */
50         gpio_cfg_pin(EXYNOS5420_GPIO_X15, S5P_GPIO_OUTPUT);
51         gpio_set_value(EXYNOS5420_GPIO_X15, 1);
52
53         /* Set Hotplug detect for DP */
54         gpio_cfg_pin(EXYNOS5420_GPIO_X07, S5P_GPIO_FUNC(0x3));
55 }
56
57 vidinfo_t panel_info = {
58         .vl_freq        = 60,
59         .vl_col         = 2560,
60         .vl_row         = 1600,
61         .vl_width       = 2560,
62         .vl_height      = 1600,
63         .vl_clkp        = CONFIG_SYS_LOW,
64         .vl_hsp         = CONFIG_SYS_LOW,
65         .vl_vsp         = CONFIG_SYS_LOW,
66         .vl_dp          = CONFIG_SYS_LOW,
67         .vl_bpix        = 4,    /* LCD_BPP = 2^4, for output conosle on LCD */
68
69         /* wDP panel timing infomation */
70         .vl_hspw        = 32,
71         .vl_hbpd        = 80,
72         .vl_hfpd        = 48,
73
74         .vl_vspw        = 6,
75         .vl_vbpd        = 37,
76         .vl_vfpd        = 3,
77         .vl_cmd_allow_len = 0xf,
78
79         .win_id         = 3,
80         .cfg_gpio       = cfg_lcd_gpio,
81         .backlight_on   = NULL,
82         .lcd_power_on   = NULL,
83         .reset_lcd      = NULL,
84         .dual_lcd_enabled = 0,
85
86         .init_delay     = 0,
87         .power_on_delay = 0,
88         .reset_delay    = 0,
89         .interface_mode = FIMD_RGB_INTERFACE,
90         .dp_enabled     = 1,
91 };
92
93 static struct edp_device_info edp_info = {
94         .disp_info = {
95                 .h_res = 2560,
96                 .h_sync_width = 32,
97                 .h_back_porch = 80,
98                 .h_front_porch = 48,
99                 .v_res = 1600,
100                 .v_sync_width  = 6,
101                 .v_back_porch = 37,
102                 .v_front_porch = 3,
103                 .v_sync_rate = 60,
104         },
105         .lt_info = {
106                 .lt_status = DP_LT_NONE,
107         },
108         .video_info = {
109                 .master_mode = 0,
110                 .bist_mode = DP_DISABLE,
111                 .bist_pattern = NO_PATTERN,
112                 .h_sync_polarity = 0,
113                 .v_sync_polarity = 0,
114                 .interlaced = 0,
115                 .color_space = COLOR_RGB,
116                 .dynamic_range = VESA,
117                 .ycbcr_coeff = COLOR_YCBCR601,
118                 .color_depth = COLOR_8,
119         },
120 };
121
122 static struct exynos_dp_platform_data dp_platform_data = {
123         .phy_enable     = set_dp_phy_ctrl,
124         .edp_dev_info   = &edp_info,
125 };
126
127 void init_panel_info(vidinfo_t *vid)
128 {
129         vid->rgb_mode   = MODE_RGB_P;
130
131         exynos_set_dp_platform_data(&dp_platform_data);
132 }
133 #endif
134
135 int board_get_revision(void)
136 {
137         return 0;
138 }