]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - board/socrates/sdram.c
rename CFG_ macros to CONFIG_SYS
[karo-tx-uboot.git] / board / socrates / sdram.c
1 /*
2  * (C) Copyright 2008
3  * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24
25 #include <common.h>
26 #include <asm/processor.h>
27 #include <asm/immap_85xx.h>
28 #include <asm/fsl_ddr_sdram.h>
29 #include <asm/processor.h>
30 #include <asm/mmu.h>
31 #include <spd_sdram.h>
32
33
34 #if !defined(CONFIG_SPD_EEPROM)
35 /*
36  * Autodetect onboard DDR SDRAM on 85xx platforms
37  *
38  * NOTE: Some of the hardcoded values are hardware dependant,
39  *       so this should be extended for other future boards
40  *       using this routine!
41  */
42 long int sdram_setup(int casl)
43 {
44         volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
45
46         /*
47          * Disable memory controller.
48          */
49         ddr->cs0_config = 0;
50         ddr->sdram_cfg = 0;
51
52         ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
53         ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
54         ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
55         ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
56         ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
57         ddr->sdram_mode = CONFIG_SYS_DDR_MODE;
58         ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
59         ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONFIG_2;
60         ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CONTROL;
61
62         asm ("sync;isync;msync");
63         udelay(1000);
64
65         ddr->sdram_cfg = CONFIG_SYS_DDR_CONFIG;
66         asm ("sync; isync; msync");
67         udelay(1000);
68
69         if (get_ram_size(0, CONFIG_SYS_SDRAM_SIZE<<20) == CONFIG_SYS_SDRAM_SIZE<<20) {
70                 /*
71                  * OK, size detected -> all done
72                  */
73                 return CONFIG_SYS_SDRAM_SIZE<<20;
74         }
75
76         return 0;                               /* nothing found !              */
77 }
78 #endif
79
80 phys_size_t initdram (int board_type)
81 {
82         long dram_size = 0;
83 #if defined(CONFIG_SPD_EEPROM)
84         dram_size = fsl_ddr_sdram();
85         dram_size = setup_ddr_tlbs(dram_size / 0x100000);
86         dram_size *= 0x100000;
87 #else
88         dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL);
89 #endif
90         return dram_size;
91 }
92
93 #if defined(CONFIG_SYS_DRAM_TEST)
94 int testdram (void)
95 {
96         uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
97         uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
98         uint *p;
99
100         printf ("SDRAM test phase 1:\n");
101         for (p = pstart; p < pend; p++)
102                 *p = 0xaaaaaaaa;
103
104         for (p = pstart; p < pend; p++) {
105                 if (*p != 0xaaaaaaaa) {
106                         printf ("SDRAM test fails at: %08x\n", (uint) p);
107                         return 1;
108                 }
109         }
110
111         printf ("SDRAM test phase 2:\n");
112         for (p = pstart; p < pend; p++)
113                 *p = 0x55555555;
114
115         for (p = pstart; p < pend; p++) {
116                 if (*p != 0x55555555) {
117                         printf ("SDRAM test fails at: %08x\n", (uint) p);
118                         return 1;
119                 }
120         }
121
122         printf ("SDRAM test passed.\n");
123         return 0;
124 }
125 #endif