common/cmd_nand.c

   1 /*
   2  * Driver for NAND support, Rick Bronson
   3  * borrowed heavily from:
   4  * (c) 1999 Machine Vision Holdings, Inc.
   5  * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
   6  *
   7  * Added 16-bit nand support
   8  * (C) 2004 Texas Instruments
   9  */
  10
  11 #include <common.h>
  12
  13
  14 #ifndef CONFIG_NAND_LEGACY
  15 /*
  16  *
  17  * New NAND support
  18  *
  19  */
  20 #include <common.h>
  21 #include <linux/mtd/mtd.h>
  22
  23 #if defined(CONFIG_CMD_NAND)
  24
  25 #include <command.h>
  26 #include <watchdog.h>
  27 #include <malloc.h>
  28 #include <asm/byteorder.h>
  29 #include <jffs2/jffs2.h>
  30 #include <nand.h>
  31
  32 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
  33
  34 /* parition handling routines */
  35 int mtdparts_init(void);
  36 int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
  37 int find_dev_and_part(const char *id, struct mtd_device **dev,
  38                       u8 *part_num, struct part_info **part);
  39 #endif
  40
  41 static int nand_dump(nand_info_t *nand, ulong off, int only_oob)
  42 {
  43         int i;
  44         u_char *datbuf, *oobbuf, *p;
  45
  46         datbuf = malloc(nand->writesize + nand->oobsize);
  47         oobbuf = malloc(nand->oobsize);
  48         if (!datbuf || !oobbuf) {
  49                 puts("No memory for page buffer\n");
  50                 return 1;
  51         }
  52         off &= ~(nand->writesize - 1);
  53         loff_t addr = (loff_t) off;
  54         struct mtd_oob_ops ops;
  55         memset(&ops, 0, sizeof(ops));
  56         ops.datbuf = datbuf;
  57         ops.oobbuf = oobbuf; /* must exist, but oob data will be appended to ops.datbuf */
  58         ops.len = nand->writesize;
  59         ops.ooblen = nand->oobsize;
  60         ops.mode = MTD_OOB_RAW;
  61         i = nand->read_oob(nand, addr, &ops);
  62         if (i < 0) {
  63                 printf("Error (%d) reading page %08lx\n", i, off);
  64                 free(datbuf);
  65                 free(oobbuf);
  66                 return 1;
  67         }
  68         printf("Page %08lx dump:\n", off);
  69         i = nand->writesize >> 4;
  70         p = datbuf;
  71
  72         while (i--) {
  73                 if (!only_oob)
  74                         printf("\t%02x %02x %02x %02x %02x %02x %02x %02x"
  75                                "  %02x %02x %02x %02x %02x %02x %02x %02x\n",
  76                                p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7],
  77                                p[8], p[9], p[10], p[11], p[12], p[13], p[14],
  78                                p[15]);
  79                 p += 16;
  80         }
  81         puts("OOB:\n");
  82         i = nand->oobsize >> 3;
  83         while (i--) {
  84                 printf("\t%02x %02x %02x %02x %02x %02x %02x %02x\n",
  85                        p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]);
  86                 p += 8;
  87         }
  88         free(datbuf);
  89         free(oobbuf);
  90
  91         return 0;
  92 }
  93
  94 /* ------------------------------------------------------------------------- */
  95
  96 static inline int str2long(char *p, ulong *num)
  97 {
  98         char *endptr;
  99
 100         *num = simple_strtoul(p, &endptr, 16);
 101         return (*p != '\0' && *endptr == '\0') ? 1 : 0;
 102 }
 103
 104 static int
 105 arg_off_size(int argc, char *argv[], nand_info_t *nand, ulong *off, size_t *size)
 106 {
 107         int idx = nand_curr_device;
 108 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 109         struct mtd_device *dev;
 110         struct part_info *part;
 111         u8 pnum;
 112
 113         if (argc >= 1 && !(str2long(argv[0], off))) {
 114                 if ((mtdparts_init() == 0) &&
 115                     (find_dev_and_part(argv[0], &dev, &pnum, &part) == 0)) {
 116                         if (dev->id->type != MTD_DEV_TYPE_NAND) {
 117                                 puts("not a NAND device\n");
 118                                 return -1;
 119                         }
 120                         *off = part->offset;
 121                         if (argc >= 2) {
 122                                 if (!(str2long(argv[1], (ulong *)size))) {
 123                                         printf("'%s' is not a number\n", argv[1]);
 124                                         return -1;
 125                                 }
 126                                 if (*size > part->size)
 127                                         *size = part->size;
 128                         } else {
 129                                 *size = part->size;
 130                         }
 131                         idx = dev->id->num;
 132                         *nand = nand_info[idx];
 133                         goto out;
 134                 }
 135         }
 136 #endif
 137
 138         if (argc >= 1) {
 139                 if (!(str2long(argv[0], off))) {
 140                         printf("'%s' is not a number\n", argv[0]);
 141                         return -1;
 142                 }
 143         } else {
 144                 *off = 0;
 145         }
 146
 147         if (argc >= 2) {
 148                 if (!(str2long(argv[1], (ulong *)size))) {
 149                         printf("'%s' is not a number\n", argv[1]);
 150                         return -1;
 151                 }
 152         } else {
 153                 *size = nand->size - *off;
 154         }
 155
 156 #if  defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 157 out:
 158 #endif
 159         printf("device %d ", idx);
 160         if (*size == nand->size)
 161                 puts("whole chip\n");
 162         else
 163                 printf("offset 0x%lx, size 0x%x\n", *off, *size);
 164         return 0;
 165 }
 166
 167 int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 168 {
 169         int i, dev, ret = 0;
 170         ulong addr, off;
 171         size_t size;
 172         char *cmd, *s;
 173         nand_info_t *nand;
 174 #ifdef CONFIG_SYS_NAND_QUIET
 175         int quiet = CONFIG_SYS_NAND_QUIET;
 176 #else
 177         int quiet = 0;
 178 #endif
 179         const char *quiet_str = getenv("quiet");
 180
 181         /* at least two arguments please */
 182         if (argc < 2)
 183                 goto usage;
 184
 185         if (quiet_str)
 186                 quiet = simple_strtoul(quiet_str, NULL, 0) != 0;
 187
 188         cmd = argv[1];
 189
 190         if (strcmp(cmd, "info") == 0) {
 191
 192                 putc('\n');
 193                 for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
 194                         if (nand_info[i].name)
 195                                 printf("Device %d: %s, sector size %u KiB\n",
 196                                        i, nand_info[i].name,
 197                                        nand_info[i].erasesize >> 10);
 198                 }
 199                 return 0;
 200         }
 201
 202         if (strcmp(cmd, "device") == 0) {
 203
 204                 if (argc < 3) {
 205                         if ((nand_curr_device < 0) ||
 206                             (nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE))
 207                                 puts("\nno devices available\n");
 208                         else
 209                                 printf("\nDevice %d: %s\n", nand_curr_device,
 210                                        nand_info[nand_curr_device].name);
 211                         return 0;
 212                 }
 213                 dev = (int)simple_strtoul(argv[2], NULL, 10);
 214                 if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev].name) {
 215                         puts("No such device\n");
 216                         return 1;
 217                 }
 218                 printf("Device %d: %s", dev, nand_info[dev].name);
 219                 puts("... is now current device\n");
 220                 nand_curr_device = dev;
 221
 222 #ifdef CONFIG_SYS_NAND_SELECT_DEVICE
 223                 /*
 224                  * Select the chip in the board/cpu specific driver
 225                  */
 226                 board_nand_select_device(nand_info[dev].priv, dev);
 227 #endif
 228
 229                 return 0;
 230         }
 231
 232         if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
 233             strncmp(cmd, "dump", 4) != 0 &&
 234             strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
 235             strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
 236             strcmp(cmd, "biterr") != 0 &&
 237             strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0 )
 238                 goto usage;
 239
 240         /* the following commands operate on the current device */
 241         if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
 242             !nand_info[nand_curr_device].name) {
 243                 puts("\nno devices available\n");
 244                 return 1;
 245         }
 246         nand = &nand_info[nand_curr_device];
 247
 248         if (strcmp(cmd, "bad") == 0) {
 249                 printf("\nDevice %d bad blocks:\n", nand_curr_device);
 250                 for (off = 0; off < nand->size; off += nand->erasesize)
 251                         if (nand_block_isbad(nand, off))
 252                                 printf("  %08lx\n", off);
 253                 return 0;
 254         }
 255
 256         /*
 257          * Syntax is:
 258          *   0    1     2       3    4
 259          *   nand erase [clean] [off size]
 260          */
 261         if (strcmp(cmd, "erase") == 0 || strcmp(cmd, "scrub") == 0) {
 262                 nand_erase_options_t opts;
 263                 /* "clean" at index 2 means request to write cleanmarker */
 264                 int clean = argc > 2 && !strcmp("clean", argv[2]);
 265                 int o = clean ? 3 : 2;
 266                 int scrub = !strcmp(cmd, "scrub");
 267
 268                 printf("\nNAND %s: ", scrub ? "scrub" : "erase");
 269                 /* skip first two or three arguments, look for offset and size */
 270                 if (arg_off_size(argc - o, argv + o, nand, &off, &size) != 0)
 271                         return 1;
 272
 273                 memset(&opts, 0, sizeof(opts));
 274                 opts.offset = off;
 275                 opts.length = size;
 276                 opts.jffs2  = clean;
 277                 opts.quiet  = quiet;
 278
 279                 if (scrub) {
 280                         puts("Warning: "
 281                              "scrub option will erase all factory set "
 282                              "bad blocks!\n"
 283                              "         "
 284                              "There is no reliable way to recover them.\n"
 285                              "         "
 286                              "Use this command only for testing purposes "
 287                              "if you\n"
 288                              "         "
 289                              "are sure of what you are doing!\n"
 290                              "\nReally scrub this NAND flash? <y/N>\n");
 291
 292                         if (getc() == 'y' && getc() == '\r') {
 293                                 opts.scrub = 1;
 294                         } else {
 295                                 puts("scrub aborted\n");
 296                                 return -1;
 297                         }
 298                 }
 299                 ret = nand_erase_opts(nand, &opts);
 300                 printf("%s\n", ret ? "ERROR" : "OK");
 301
 302                 return ret == 0 ? 0 : 1;
 303         }
 304
 305         if (strncmp(cmd, "dump", 4) == 0) {
 306                 if (argc < 3)
 307                         goto usage;
 308
 309                 s = strchr(cmd, '.');
 310                 off = (int)simple_strtoul(argv[2], NULL, 16);
 311
 312                 if (s != NULL && strcmp(s, ".oob") == 0)
 313                         ret = nand_dump(nand, off, 1);
 314                 else
 315                         ret = nand_dump(nand, off, 0);
 316
 317                 return ret == 0 ? 1 : 0;
 318
 319         }
 320
 321         if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
 322                 int read;
 323
 324                 if (argc < 4)
 325                         goto usage;
 326
 327                 addr = (ulong)simple_strtoul(argv[2], NULL, 16);
 328
 329                 read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
 330                 printf("\nNAND %s: ", read ? "read" : "write");
 331                 if (arg_off_size(argc - 3, argv + 3, nand, &off, &size) != 0)
 332                         return 1;
 333
 334                 s = strchr(cmd, '.');
 335                 if (!s || !strcmp(s, ".jffs2") ||
 336                     !strcmp(s, ".e") || !strcmp(s, ".i")) {
 337                         if (read)
 338                                 ret = nand_read_skip_bad(nand, off, &size,
 339                                                          (u_char *)addr);
 340                         else
 341                                 ret = nand_write_skip_bad(nand, off, &size,
 342                                                           (u_char *)addr);
 343                 } else if (s != NULL && !strcmp(s, ".oob")) {
 344                         /* out-of-band data */
 345                         mtd_oob_ops_t ops = {
 346                                 .oobbuf = (u8 *)addr,
 347                                 .ooblen = size,
 348                                 .mode = MTD_OOB_RAW
 349                         };
 350
 351                         if (read)
 352                                 ret = nand->read_oob(nand, off, &ops);
 353                         else
 354                                 ret = nand->write_oob(nand, off, &ops);
 355                 } else {
 356                         printf("Unknown nand command suffix '%s'.\n", s);
 357                         return 1;
 358                 }
 359
 360                 printf(" %d bytes %s: %s\n", size,
 361                        read ? "read" : "written", ret ? "ERROR" : "OK");
 362
 363                 return ret == 0 ? 0 : 1;
 364         }
 365
 366         if (strcmp(cmd, "markbad") == 0) {
 367                 addr = (ulong)simple_strtoul(argv[2], NULL, 16);
 368
 369                 int ret = nand->block_markbad(nand, addr);
 370                 if (ret == 0) {
 371                         printf("block 0x%08lx successfully marked as bad\n",
 372                                (ulong) addr);
 373                         return 0;
 374                 } else {
 375                         printf("block 0x%08lx NOT marked as bad! ERROR %d\n",
 376                                (ulong) addr, ret);
 377                 }
 378                 return 1;
 379         }
 380
 381         if (strcmp(cmd, "biterr") == 0) {
 382                 /* todo */
 383                 return 1;
 384         }
 385
 386         if (strcmp(cmd, "lock") == 0) {
 387                 int tight  = 0;
 388                 int status = 0;
 389                 if (argc == 3) {
 390                         if (!strcmp("tight", argv[2]))
 391                                 tight = 1;
 392                         if (!strcmp("status", argv[2]))
 393                                 status = 1;
 394                 }
 395 /*
 396  * ! BROKEN !
 397  *
 398  * TODO: must be implemented and tested by someone with HW
 399  */
 400 #if 0
 401                 if (status) {
 402                         ulong block_start = 0;
 403                         ulong off;
 404                         int last_status = -1;
 405
 406                         struct nand_chip *nand_chip = nand->priv;
 407                         /* check the WP bit */
 408                         nand_chip->cmdfunc (nand, NAND_CMD_STATUS, -1, -1);
 409                         printf("device is %swrite protected\n",
 410                                (nand_chip->read_byte(nand) & 0x80 ?
 411                                "NOT " : ""));
 412
 413                         for (off = 0; off < nand->size; off += nand->writesize) {
 414                                 int s = nand_get_lock_status(nand, off);
 415
 416                                 /* print message only if status has changed
 417                                  * or at end of chip
 418                                  */
 419                                 if (off == nand->size - nand->writesize
 420                                     || (s != last_status && off != 0))  {
 421
 422                                         printf("%08lx - %08lx: %8d pages %s%s%s\n",
 423                                                block_start,
 424                                                off-1,
 425                                                (off-block_start)/nand->writesize,
 426                                                ((last_status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
 427                                                ((last_status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
 428                                                ((last_status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
 429                                 }
 430
 431                                 last_status = s;
 432                         }
 433                 } else {
 434                         if (!nand_lock(nand, tight)) {
 435                                 puts("NAND flash successfully locked\n");
 436                         } else {
 437                                 puts("Error locking NAND flash\n");
 438                                 return 1;
 439                         }
 440                 }
 441 #endif
 442                 return 0;
 443         }
 444
 445         if (strcmp(cmd, "unlock") == 0) {
 446                 if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
 447                         return 1;
 448
 449 /*
 450  * ! BROKEN !
 451  *
 452  * TODO: must be implemented and tested by someone with HW
 453  */
 454 #if 0
 455                 if (!nand_unlock(nand, off, size)) {
 456                         puts("NAND flash successfully unlocked\n");
 457                 } else {
 458                         puts("Error unlocking NAND flash, "
 459                              "write and erase will probably fail\n");
 460                         return 1;
 461                 }
 462 #endif
 463                 return 0;
 464         }
 465
 466 usage:
 467         printf("Usage:\n%s\n", cmdtp->usage);
 468         return 1;
 469 }
 470
 471 U_BOOT_CMD(nand, 5, 1, do_nand,
 472            "nand - NAND sub-system\n",
 473            "info - show available NAND devices\n"
 474            "nand device [dev] - show or set current device\n"
 475            "nand read - addr off|partition size\n"
 476            "nand write - addr off|partition size\n"
 477            "    read/write 'size' bytes starting at offset 'off'\n"
 478            "    to/from memory address 'addr', skipping bad blocks.\n"
 479            "nand erase [clean] [off size] - erase 'size' bytes from\n"
 480            "    offset 'off' (entire device if not specified)\n"
 481            "nand bad - show bad blocks\n"
 482            "nand dump[.oob] off - dump page\n"
 483            "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
 484            "nand markbad off - mark bad block at offset (UNSAFE)\n"
 485            "nand biterr off - make a bit error at offset (UNSAFE)\n"
 486            "nand lock [tight] [status]\n"
 487            "    bring nand to lock state or display locked pages\n"
 488            "nand unlock [offset] [size] - unlock section\n");
 489
 490 static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
 491                            ulong offset, ulong addr, char *cmd)
 492 {
 493         int r;
 494         char *ep, *s;
 495         size_t cnt;
 496         image_header_t *hdr;
 497 #if defined(CONFIG_FIT)
 498         const void *fit_hdr = NULL;
 499 #endif
 500
 501         s = strchr(cmd, '.');
 502         if (s != NULL &&
 503             (strcmp(s, ".jffs2") && !strcmp(s, ".e") && !strcmp(s, ".i"))) {
 504                 printf("Unknown nand load suffix '%s'\n", s);
 505                 show_boot_progress(-53);
 506                 return 1;
 507         }
 508
 509         printf("\nLoading from %s, offset 0x%lx\n", nand->name, offset);
 510
 511         cnt = nand->writesize;
 512         r = nand_read(nand, offset, &cnt, (u_char *) addr);
 513         if (r) {
 514                 puts("** Read error\n");
 515                 show_boot_progress (-56);
 516                 return 1;
 517         }
 518         show_boot_progress (56);
 519
 520         switch (genimg_get_format ((void *)addr)) {
 521         case IMAGE_FORMAT_LEGACY:
 522                 hdr = (image_header_t *)addr;
 523
 524                 show_boot_progress (57);
 525                 image_print_contents (hdr);
 526
 527                 cnt = image_get_image_size (hdr);
 528                 break;
 529 #if defined(CONFIG_FIT)
 530         case IMAGE_FORMAT_FIT:
 531                 fit_hdr = (const void *)addr;
 532                 puts ("Fit image detected...\n");
 533
 534                 cnt = fit_get_size (fit_hdr);
 535                 break;
 536 #endif
 537         default:
 538                 show_boot_progress (-57);
 539                 puts ("** Unknown image type\n");
 540                 return 1;
 541         }
 542         show_boot_progress (57);
 543
 544         /* FIXME: skip bad blocks */
 545         r = nand_read(nand, offset, &cnt, (u_char *) addr);
 546         if (r) {
 547                 puts("** Read error\n");
 548                 show_boot_progress (-58);
 549                 return 1;
 550         }
 551         show_boot_progress (58);
 552
 553 #if defined(CONFIG_FIT)
 554         /* This cannot be done earlier, we need complete FIT image in RAM first */
 555         if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
 556                 if (!fit_check_format (fit_hdr)) {
 557                         show_boot_progress (-150);
 558                         puts ("** Bad FIT image format\n");
 559                         return 1;
 560                 }
 561                 show_boot_progress (151);
 562                 fit_print_contents (fit_hdr);
 563         }
 564 #endif
 565
 566         /* Loading ok, update default load address */
 567
 568         load_addr = addr;
 569
 570         /* Check if we should attempt an auto-start */
 571         if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
 572                 char *local_args[2];
 573                 extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
 574
 575                 local_args[0] = cmd;
 576                 local_args[1] = NULL;
 577
 578                 printf("Automatic boot of image at addr 0x%08lx ...\n", addr);
 579
 580                 do_bootm(cmdtp, 0, 1, local_args);
 581                 return 1;
 582         }
 583         return 0;
 584 }
 585
 586 int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 587 {
 588         char *boot_device = NULL;
 589         int idx;
 590         ulong addr, offset = 0;
 591 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 592         struct mtd_device *dev;
 593         struct part_info *part;
 594         u8 pnum;
 595
 596         if (argc >= 2) {
 597                 char *p = (argc == 2) ? argv[1] : argv[2];
 598                 if (!(str2long(p, &addr)) && (mtdparts_init() == 0) &&
 599                     (find_dev_and_part(p, &dev, &pnum, &part) == 0)) {
 600                         if (dev->id->type != MTD_DEV_TYPE_NAND) {
 601                                 puts("Not a NAND device\n");
 602                                 return 1;
 603                         }
 604                         if (argc > 3)
 605                                 goto usage;
 606                         if (argc == 3)
 607                                 addr = simple_strtoul(argv[1], NULL, 16);
 608                         else
 609                                 addr = CONFIG_SYS_LOAD_ADDR;
 610                         return nand_load_image(cmdtp, &nand_info[dev->id->num],
 611                                                part->offset, addr, argv[0]);
 612                 }
 613         }
 614 #endif
 615
 616         show_boot_progress(52);
 617         switch (argc) {
 618         case 1:
 619                 addr = CONFIG_SYS_LOAD_ADDR;
 620                 boot_device = getenv("bootdevice");
 621                 break;
 622         case 2:
 623                 addr = simple_strtoul(argv[1], NULL, 16);
 624                 boot_device = getenv("bootdevice");
 625                 break;
 626         case 3:
 627                 addr = simple_strtoul(argv[1], NULL, 16);
 628                 boot_device = argv[2];
 629                 break;
 630         case 4:
 631                 addr = simple_strtoul(argv[1], NULL, 16);
 632                 boot_device = argv[2];
 633                 offset = simple_strtoul(argv[3], NULL, 16);
 634                 break;
 635         default:
 636 #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE)
 637 usage:
 638 #endif
 639                 printf("Usage:\n%s\n", cmdtp->usage);
 640                 show_boot_progress(-53);
 641                 return 1;
 642         }
 643
 644         show_boot_progress(53);
 645         if (!boot_device) {
 646                 puts("\n** No boot device **\n");
 647                 show_boot_progress(-54);
 648                 return 1;
 649         }
 650         show_boot_progress(54);
 651
 652         idx = simple_strtoul(boot_device, NULL, 16);
 653
 654         if (idx < 0 || idx >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[idx].name) {
 655                 printf("\n** Device %d not available\n", idx);
 656                 show_boot_progress(-55);
 657                 return 1;
 658         }
 659         show_boot_progress(55);
 660
 661         return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]);
 662 }
 663
 664 U_BOOT_CMD(nboot, 4, 1, do_nandboot,
 665         "nboot   - boot from NAND device\n",
 666         "[partition] | [[[loadAddr] dev] offset]\n");
 667
 668 #endif
 669
 670 #else /* CONFIG_NAND_LEGACY */
 671 /*
 672  *
 673  * Legacy NAND support - to be phased out
 674  *
 675  */
 676 #include <command.h>
 677 #include <malloc.h>
 678 #include <asm/io.h>
 679 #include <watchdog.h>
 680
 681 #ifdef CONFIG_show_boot_progress
 682 # include <status_led.h>
 683 # define show_boot_progress(arg)        show_boot_progress(arg)
 684 #else
 685 # define show_boot_progress(arg)
 686 #endif
 687
 688 #if defined(CONFIG_CMD_NAND)
 689 #include <linux/mtd/nand_legacy.h>
 690 #if 0
 691 #include <linux/mtd/nand_ids.h>
 692 #include <jffs2/jffs2.h>
 693 #endif
 694
 695 #ifdef CONFIG_OMAP1510
 696 void archflashwp(void *archdata, int wp);
 697 #endif
 698
 699 #define ROUND_DOWN(value,boundary)      ((value) & (~((boundary)-1)))
 700
 701 #undef  NAND_DEBUG
 702 #undef  PSYCHO_DEBUG
 703
 704 /* ****************** WARNING *********************
 705  * When ALLOW_ERASE_BAD_DEBUG is non-zero the erase command will
 706  * erase (or at least attempt to erase) blocks that are marked
 707  * bad. This can be very handy if you are _sure_ that the block
 708  * is OK, say because you marked a good block bad to test bad
 709  * block handling and you are done testing, or if you have
 710  * accidentally marked blocks bad.
 711  *
 712  * Erasing factory marked bad blocks is a _bad_ idea. If the
 713  * erase succeeds there is no reliable way to find them again,
 714  * and attempting to program or erase bad blocks can affect
 715  * the data in _other_ (good) blocks.
 716  */
 717 #define  ALLOW_ERASE_BAD_DEBUG 0
 718
 719 #define CONFIG_MTD_NAND_ECC  /* enable ECC */
 720 #define CONFIG_MTD_NAND_ECC_JFFS2
 721
 722 /* bits for nand_legacy_rw() `cmd'; or together as needed */
 723 #define NANDRW_READ         0x01
 724 #define NANDRW_WRITE        0x00
 725 #define NANDRW_JFFS2        0x02
 726 #define NANDRW_JFFS2_SKIP   0x04
 727
 728 /*
 729  * Imports from nand_legacy.c
 730  */
 731 extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
 732 extern int curr_device;
 733 extern int nand_legacy_erase(struct nand_chip *nand, size_t ofs,
 734                             size_t len, int clean);
 735 extern int nand_legacy_rw(struct nand_chip *nand, int cmd, size_t start,
 736                          size_t len, size_t *retlen, u_char *buf);
 737 extern void nand_print(struct nand_chip *nand);
 738 extern void nand_print_bad(struct nand_chip *nand);
 739 extern int nand_read_oob(struct nand_chip *nand, size_t ofs,
 740                                size_t len, size_t *retlen, u_char *buf);
 741 extern int nand_write_oob(struct nand_chip *nand, size_t ofs,
 742                                 size_t len, size_t *retlen, const u_char *buf);
 743
 744
 745 int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 746 {
 747         int rcode = 0;
 748
 749         switch (argc) {
 750         case 0:
 751         case 1:
 752                 printf ("Usage:\n%s\n", cmdtp->usage);
 753                 return 1;
 754         case 2:
 755                 if (strcmp (argv[1], "info") == 0) {
 756                         int i;
 757
 758                         putc ('\n');
 759
 760                         for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; ++i) {
 761                                 if (nand_dev_desc[i].ChipID ==
 762                                     NAND_ChipID_UNKNOWN)
 763                                         continue;       /* list only known devices */
 764                                 printf ("Device %d: ", i);
 765                                 nand_print (&nand_dev_desc[i]);
 766                         }
 767                         return 0;
 768
 769                 } else if (strcmp (argv[1], "device") == 0) {
 770                         if ((curr_device < 0)
 771                             || (curr_device >= CONFIG_SYS_MAX_NAND_DEVICE)) {
 772                                 puts ("\nno devices available\n");
 773                                 return 1;
 774                         }
 775                         printf ("\nDevice %d: ", curr_device);
 776                         nand_print (&nand_dev_desc[curr_device]);
 777                         return 0;
 778
 779                 } else if (strcmp (argv[1], "bad") == 0) {
 780                         if ((curr_device < 0)
 781                             || (curr_device >= CONFIG_SYS_MAX_NAND_DEVICE)) {
 782                                 puts ("\nno devices available\n");
 783                                 return 1;
 784                         }
 785                         printf ("\nDevice %d bad blocks:\n", curr_device);
 786                         nand_print_bad (&nand_dev_desc[curr_device]);
 787                         return 0;
 788
 789                 }
 790                 printf ("Usage:\n%s\n", cmdtp->usage);
 791                 return 1;
 792         case 3:
 793                 if (strcmp (argv[1], "device") == 0) {
 794                         int dev = (int) simple_strtoul (argv[2], NULL, 10);
 795
 796                         printf ("\nDevice %d: ", dev);
 797                         if (dev >= CONFIG_SYS_MAX_NAND_DEVICE) {
 798                                 puts ("unknown device\n");
 799                                 return 1;
 800                         }
 801                         nand_print (&nand_dev_desc[dev]);
 802                         /*nand_print (dev); */
 803
 804                         if (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN) {
 805                                 return 1;
 806                         }
 807
 808                         curr_device = dev;
 809
 810                         puts ("... is now current device\n");
 811
 812                         return 0;
 813                 } else if (strcmp (argv[1], "erase") == 0
 814                            && strcmp (argv[2], "clean") == 0) {
 815                         struct nand_chip *nand = &nand_dev_desc[curr_device];
 816                         ulong off = 0;
 817                         ulong size = nand->totlen;
 818                         int ret;
 819
 820                         printf ("\nNAND erase: device %d offset %ld, size %ld ... ", curr_device, off, size);
 821
 822                         ret = nand_legacy_erase (nand, off, size, 1);
 823
 824                         printf ("%s\n", ret ? "ERROR" : "OK");
 825
 826                         return ret;
 827                 }
 828
 829                 printf ("Usage:\n%s\n", cmdtp->usage);
 830                 return 1;
 831         default:
 832                 /* at least 4 args */
 833
 834                 if (strncmp (argv[1], "read", 4) == 0 ||
 835                     strncmp (argv[1], "write", 5) == 0) {
 836                         ulong addr = simple_strtoul (argv[2], NULL, 16);
 837                         off_t off = simple_strtoul (argv[3], NULL, 16);
 838                         size_t size = simple_strtoul (argv[4], NULL, 16);
 839                         int cmd = (strncmp (argv[1], "read", 4) == 0) ?
 840                                   NANDRW_READ : NANDRW_WRITE;
 841                         size_t total;
 842                         int ret;
 843                         char *cmdtail = strchr (argv[1], '.');
 844
 845                         if (cmdtail && !strncmp (cmdtail, ".oob", 2)) {
 846                                 /* read out-of-band data */
 847                                 if (cmd & NANDRW_READ) {
 848                                         ret = nand_read_oob (nand_dev_desc + curr_device,
 849                                                              off, size, &total,
 850                                                              (u_char *) addr);
 851                                 } else {
 852                                         ret = nand_write_oob (nand_dev_desc + curr_device,
 853                                                               off, size, &total,
 854                                                               (u_char *) addr);
 855                                 }
 856                                 return ret;
 857                         } else if (cmdtail && !strncmp (cmdtail, ".jffs2", 2))
 858                                 cmd |= NANDRW_JFFS2;    /* skip bad blocks */
 859                         else if (cmdtail && !strncmp (cmdtail, ".jffs2s", 2)) {
 860                                 cmd |= NANDRW_JFFS2;    /* skip bad blocks (on read too) */
 861                                 if (cmd & NANDRW_READ)
 862                                         cmd |= NANDRW_JFFS2_SKIP;       /* skip bad blocks (on read too) */
 863                         }
 864 #ifdef SXNI855T
 865                         /* need ".e" same as ".j" for compatibility with older units */
 866                         else if (cmdtail && !strcmp (cmdtail, ".e"))
 867                                 cmd |= NANDRW_JFFS2;    /* skip bad blocks */
 868 #endif
 869 #ifdef CONFIG_SYS_NAND_SKIP_BAD_DOT_I
 870                         /* need ".i" same as ".jffs2s" for compatibility with older units (esd) */
 871                         /* ".i" for image -> read skips bad block (no 0xff) */
 872                         else if (cmdtail && !strcmp (cmdtail, ".i")) {
 873                                 cmd |= NANDRW_JFFS2;    /* skip bad blocks (on read too) */
 874                                 if (cmd & NANDRW_READ)
 875                                         cmd |= NANDRW_JFFS2_SKIP;       /* skip bad blocks (on read too) */
 876                         }
 877 #endif /* CONFIG_SYS_NAND_SKIP_BAD_DOT_I */
 878                         else if (cmdtail) {
 879                                 printf ("Usage:\n%s\n", cmdtp->usage);
 880                                 return 1;
 881                         }
 882
 883                         printf ("\nNAND %s: device %d offset %ld, size %lu ...\n",
 884                                 (cmd & NANDRW_READ) ? "read" : "write",
 885                                 curr_device, off, (ulong)size);
 886
 887                         ret = nand_legacy_rw (nand_dev_desc + curr_device,
 888                                               cmd, off, size,
 889                                               &total, (u_char *) addr);
 890
 891                         printf (" %d bytes %s: %s\n", total,
 892                                 (cmd & NANDRW_READ) ? "read" : "written",
 893                                 ret ? "ERROR" : "OK");
 894
 895                         return ret;
 896                 } else if (strcmp (argv[1], "erase") == 0 &&
 897                            (argc == 4 || strcmp ("clean", argv[2]) == 0)) {
 898                         int clean = argc == 5;
 899                         ulong off =
 900                                 simple_strtoul (argv[2 + clean], NULL, 16);
 901                         ulong size =
 902                                 simple_strtoul (argv[3 + clean], NULL, 16);
 903                         int ret;
 904
 905                         printf ("\nNAND erase: device %d offset %ld, size %ld ...\n",
 906                                 curr_device, off, size);
 907
 908                         ret = nand_legacy_erase (nand_dev_desc + curr_device,
 909                                                  off, size, clean);
 910
 911                         printf ("%s\n", ret ? "ERROR" : "OK");
 912
 913                         return ret;
 914                 } else {
 915                         printf ("Usage:\n%s\n", cmdtp->usage);
 916                         rcode = 1;
 917                 }
 918
 919                 return rcode;
 920         }
 921 }
 922
 923 U_BOOT_CMD(
 924         nand,   5,      1,      do_nand,
 925         "nand    - legacy NAND sub-system\n",
 926         "info  - show available NAND devices\n"
 927         "nand device [dev] - show or set current device\n"
 928         "nand read[.jffs2[s]]  addr off size\n"
 929         "nand write[.jffs2] addr off size - read/write `size' bytes starting\n"
 930         "    at offset `off' to/from memory address `addr'\n"
 931         "nand erase [clean] [off size] - erase `size' bytes from\n"
 932         "    offset `off' (entire device if not specified)\n"
 933         "nand bad - show bad blocks\n"
 934         "nand read.oob addr off size - read out-of-band data\n"
 935         "nand write.oob addr off size - read out-of-band data\n"
 936 );
 937
 938 int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 939 {
 940         char *boot_device = NULL;
 941         char *ep;
 942         int dev;
 943         ulong cnt;
 944         ulong addr;
 945         ulong offset = 0;
 946         image_header_t *hdr;
 947         int rcode = 0;
 948 #if defined(CONFIG_FIT)
 949         const void *fit_hdr = NULL;
 950 #endif
 951
 952         show_boot_progress (52);
 953         switch (argc) {
 954         case 1:
 955                 addr = CONFIG_SYS_LOAD_ADDR;
 956                 boot_device = getenv ("bootdevice");
 957                 break;
 958         case 2:
 959                 addr = simple_strtoul(argv[1], NULL, 16);
 960                 boot_device = getenv ("bootdevice");
 961                 break;
 962         case 3:
 963                 addr = simple_strtoul(argv[1], NULL, 16);
 964                 boot_device = argv[2];
 965                 break;
 966         case 4:
 967                 addr = simple_strtoul(argv[1], NULL, 16);
 968                 boot_device = argv[2];
 969                 offset = simple_strtoul(argv[3], NULL, 16);
 970                 break;
 971         default:
 972                 printf ("Usage:\n%s\n", cmdtp->usage);
 973                 show_boot_progress (-53);
 974                 return 1;
 975         }
 976
 977         show_boot_progress (53);
 978         if (!boot_device) {
 979                 puts ("\n** No boot device **\n");
 980                 show_boot_progress (-54);
 981                 return 1;
 982         }
 983         show_boot_progress (54);
 984
 985         dev = simple_strtoul(boot_device, &ep, 16);
 986
 987         if ((dev >= CONFIG_SYS_MAX_NAND_DEVICE) ||
 988             (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) {
 989                 printf ("\n** Device %d not available\n", dev);
 990                 show_boot_progress (-55);
 991                 return 1;
 992         }
 993         show_boot_progress (55);
 994
 995         printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n",
 996             dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR,
 997             offset);
 998
 999         if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset,
1000                             SECTORSIZE, NULL, (u_char *)addr)) {
1001                 printf ("** Read error on %d\n", dev);
1002                 show_boot_progress (-56);
1003                 return 1;
1004         }
1005         show_boot_progress (56);
1006
1007         switch (genimg_get_format ((void *)addr)) {
1008         case IMAGE_FORMAT_LEGACY:
1009                 hdr = (image_header_t *)addr;
1010                 image_print_contents (hdr);
1011
1012                 cnt = image_get_image_size (hdr);
1013                 cnt -= SECTORSIZE;
1014                 break;
1015 #if defined(CONFIG_FIT)
1016         case IMAGE_FORMAT_FIT:
1017                 fit_hdr = (const void *)addr;
1018                 puts ("Fit image detected...\n");
1019
1020                 cnt = fit_get_size (fit_hdr);
1021                 break;
1022 #endif
1023         default:
1024                 show_boot_progress (-57);
1025                 puts ("** Unknown image type\n");
1026                 return 1;
1027         }
1028         show_boot_progress (57);
1029
1030         if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ,
1031                             offset + SECTORSIZE, cnt, NULL,
1032                             (u_char *)(addr+SECTORSIZE))) {
1033                 printf ("** Read error on %d\n", dev);
1034                 show_boot_progress (-58);
1035                 return 1;
1036         }
1037         show_boot_progress (58);
1038
1039 #if defined(CONFIG_FIT)
1040         /* This cannot be done earlier, we need complete FIT image in RAM first */
1041         if (genimg_get_format ((void *)addr) == IMAGE_FORMAT_FIT) {
1042                 if (!fit_check_format (fit_hdr)) {
1043                         show_boot_progress (-150);
1044                         puts ("** Bad FIT image format\n");
1045                         return 1;
1046                 }
1047                 show_boot_progress (151);
1048                 fit_print_contents (fit_hdr);
1049         }
1050 #endif
1051
1052         /* Loading ok, update default load address */
1053
1054         load_addr = addr;
1055
1056         /* Check if we should attempt an auto-start */
1057         if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
1058                 char *local_args[2];
1059                 extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
1060
1061                 local_args[0] = argv[0];
1062                 local_args[1] = NULL;
1063
1064                 printf ("Automatic boot of image at addr 0x%08lx ...\n", addr);
1065
1066                 do_bootm (cmdtp, 0, 1, local_args);
1067                 rcode = 1;
1068         }
1069         return rcode;
1070 }
1071
1072 U_BOOT_CMD(
1073         nboot,  4,      1,      do_nandboot,
1074         "nboot   - boot from NAND device\n",
1075         "loadAddr dev\n"
1076 );
1077
1078 #endif
1079
1080 #endif /* CONFIG_NAND_LEGACY */