common/spl/spl.c

   1 /*
   2  * (C) Copyright 2010
   3  * Texas Instruments, <www.ti.com>
   4  *
   5  * Aneesh V <aneesh@ti.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9 #include <common.h>
  10 #include <dm.h>
  11 #include <spl.h>
  12 #include <asm/u-boot.h>
  13 #include <nand.h>
  14 #include <fat.h>
  15 #include <version.h>
  16 #include <i2c.h>
  17 #include <image.h>
  18 #include <malloc.h>
  19 #include <dm/root.h>
  20 #include <linux/compiler.h>
  21
  22 DECLARE_GLOBAL_DATA_PTR;
  23
  24 #ifndef CONFIG_SYS_UBOOT_START
  25 #define CONFIG_SYS_UBOOT_START  CONFIG_SYS_TEXT_BASE
  26 #endif
  27 #ifndef CONFIG_SYS_MONITOR_LEN
  28 /* Unknown U-Boot size, let's assume it will not be more than 200 KB */
  29 #define CONFIG_SYS_MONITOR_LEN  (200 * 1024)
  30 #endif
  31
  32 u32 *boot_params_ptr = NULL;
  33 struct spl_image_info spl_image;
  34
  35 /* Define board data structure */
  36 static bd_t bdata __attribute__ ((section(".data")));
  37
  38 /*
  39  * Default function to determine if u-boot or the OS should
  40  * be started. This implementation always returns 1.
  41  *
  42  * Please implement your own board specific funcion to do this.
  43  *
  44  * RETURN
  45  * 0 to not start u-boot
  46  * positive if u-boot should start
  47  */
  48 #ifdef CONFIG_SPL_OS_BOOT
  49 __weak int spl_start_uboot(void)
  50 {
  51         puts("SPL: Please implement spl_start_uboot() for your board\n");
  52         puts("SPL: Direct Linux boot not active!\n");
  53         return 1;
  54 }
  55 #endif
  56
  57 /*
  58  * Weak default function for board specific cleanup/preparation before
  59  * Linux boot. Some boards/platforms might not need it, so just provide
  60  * an empty stub here.
  61  */
  62 __weak void spl_board_prepare_for_linux(void)
  63 {
  64         /* Nothing to do! */
  65 }
  66
  67 void spl_set_header_raw_uboot(void)
  68 {
  69         spl_image.size = CONFIG_SYS_MONITOR_LEN;
  70         spl_image.entry_point = CONFIG_SYS_UBOOT_START;
  71         spl_image.load_addr = CONFIG_SYS_TEXT_BASE;
  72         spl_image.os = IH_OS_U_BOOT;
  73         spl_image.name = "U-Boot";
  74 }
  75
  76 void spl_parse_image_header(const struct image_header *header)
  77 {
  78         u32 header_size = sizeof(struct image_header);
  79
  80         if (image_get_magic(header) == IH_MAGIC) {
  81                 if (spl_image.flags & SPL_COPY_PAYLOAD_ONLY) {
  82                         /*
  83                          * On some system (e.g. powerpc), the load-address and
  84                          * entry-point is located at address 0. We can't load
  85                          * to 0-0x40. So skip header in this case.
  86                          */
  87                         spl_image.load_addr = image_get_load(header);
  88                         spl_image.entry_point = image_get_ep(header);
  89                         spl_image.size = image_get_data_size(header);
  90                 } else {
  91                         spl_image.entry_point = image_get_load(header);
  92                         /* Load including the header */
  93                         spl_image.load_addr = spl_image.entry_point -
  94                                 header_size;
  95                         spl_image.size = image_get_data_size(header) +
  96                                 header_size;
  97                 }
  98                 spl_image.os = image_get_os(header);
  99                 spl_image.name = image_get_name(header);
 100                 debug("spl: payload image: %.*s load addr: 0x%x size: %d\n",
 101                         (int)sizeof(spl_image.name), spl_image.name,
 102                         spl_image.load_addr, spl_image.size);
 103         } else {
 104                 /* Signature not found - assume u-boot.bin */
 105                 debug("mkimage signature not found - ih_magic = %x\n",
 106                         header->ih_magic);
 107                 spl_set_header_raw_uboot();
 108         }
 109 }
 110
 111 __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 112 {
 113         typedef void __noreturn (*image_entry_noargs_t)(void);
 114
 115         image_entry_noargs_t image_entry =
 116                         (image_entry_noargs_t) spl_image->entry_point;
 117
 118         debug("image entry point: 0x%X\n", spl_image->entry_point);
 119         image_entry();
 120 }
 121
 122 #ifdef CONFIG_SPL_RAM_DEVICE
 123 static void spl_ram_load_image(void)
 124 {
 125         const struct image_header *header;
 126
 127         /*
 128          * Get the header.  It will point to an address defined by handoff
 129          * which will tell where the image located inside the flash. For
 130          * now, it will temporary fixed to address pointed by U-Boot.
 131          */
 132         header = (struct image_header *)
 133                 (CONFIG_SYS_TEXT_BASE - sizeof(struct image_header));
 134
 135         spl_parse_image_header(header);
 136 }
 137 #endif
 138
 139 void board_init_r(gd_t *dummy1, ulong dummy2)
 140 {
 141         u32 boot_device;
 142         debug(">>spl:board_init_r()\n");
 143
 144 #if defined(CONFIG_SYS_SPL_MALLOC_START)
 145         mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
 146                         CONFIG_SYS_SPL_MALLOC_SIZE);
 147         gd->flags |= GD_FLG_FULL_MALLOC_INIT;
 148 #elif defined(CONFIG_SYS_MALLOC_F_LEN)
 149         gd->malloc_limit = gd->malloc_base + CONFIG_SYS_MALLOC_F_LEN;
 150         gd->malloc_ptr = 0;
 151 #endif
 152 #ifdef CONFIG_SPL_DM
 153         dm_init_and_scan(true);
 154 #endif
 155
 156 #ifndef CONFIG_PPC
 157         /*
 158          * timer_init() does not exist on PPC systems. The timer is initialized
 159          * and enabled (decrementer) in interrupt_init() here.
 160          */
 161         timer_init();
 162 #endif
 163
 164 #ifdef CONFIG_SPL_BOARD_INIT
 165         spl_board_init();
 166 #endif
 167
 168         boot_device = spl_boot_device();
 169         debug("boot device - %d\n", boot_device);
 170         switch (boot_device) {
 171 #ifdef CONFIG_SPL_RAM_DEVICE
 172         case BOOT_DEVICE_RAM:
 173                 spl_ram_load_image();
 174                 break;
 175 #endif
 176 #ifdef CONFIG_SPL_MMC_SUPPORT
 177         case BOOT_DEVICE_MMC1:
 178         case BOOT_DEVICE_MMC2:
 179         case BOOT_DEVICE_MMC2_2:
 180                 spl_mmc_load_image();
 181                 break;
 182 #endif
 183 #ifdef CONFIG_SPL_NAND_SUPPORT
 184         case BOOT_DEVICE_NAND:
 185                 if (spl_nand_load_image() == 0)
 186                         break;
 187                 /* fallthru in case of failure to activate ymodem download */
 188 #endif
 189 #ifdef CONFIG_SPL_ONENAND_SUPPORT
 190         case BOOT_DEVICE_ONENAND:
 191                 spl_onenand_load_image();
 192                 break;
 193 #endif
 194 #ifdef CONFIG_SPL_NOR_SUPPORT
 195         case BOOT_DEVICE_NOR:
 196                 spl_nor_load_image();
 197                 break;
 198 #endif
 199 #ifdef CONFIG_SPL_YMODEM_SUPPORT
 200         case BOOT_DEVICE_UART:
 201                 spl_ymodem_load_image();
 202                 break;
 203 #endif
 204 #ifdef CONFIG_SPL_SPI_SUPPORT
 205         case BOOT_DEVICE_SPI:
 206                 spl_spi_load_image();
 207                 break;
 208 #endif
 209 #ifdef CONFIG_SPL_ETH_SUPPORT
 210         case BOOT_DEVICE_CPGMAC:
 211 #ifdef CONFIG_SPL_ETH_DEVICE
 212                 spl_net_load_image(CONFIG_SPL_ETH_DEVICE);
 213 #else
 214                 spl_net_load_image(NULL);
 215 #endif
 216                 break;
 217 #endif
 218 #ifdef CONFIG_SPL_USBETH_SUPPORT
 219         case BOOT_DEVICE_USBETH:
 220                 spl_net_load_image("usb_ether");
 221                 break;
 222 #endif
 223 #ifdef CONFIG_SPL_USB_SUPPORT
 224         case BOOT_DEVICE_USB:
 225                 spl_usb_load_image();
 226                 break;
 227 #endif
 228 #ifdef CONFIG_SPL_SATA_SUPPORT
 229         case BOOT_DEVICE_SATA:
 230                 spl_sata_load_image();
 231                 break;
 232 #endif
 233         default:
 234 #if defined(CONFIG_SPL_SERIAL_SUPPORT) && defined(CONFIG_SPL_LIBCOMMON_SUPPORT)
 235                 printf("SPL: Unsupported Boot Device %d\n", boot_device);
 236 #endif
 237                 hang();
 238         }
 239
 240         switch (spl_image.os) {
 241         case IH_OS_U_BOOT:
 242                 debug("Jumping to U-Boot\n");
 243                 break;
 244 #ifdef CONFIG_SPL_OS_BOOT
 245         case IH_OS_LINUX:
 246                 debug("Jumping to Linux\n");
 247                 spl_board_prepare_for_linux();
 248                 jump_to_image_linux((void *)CONFIG_SYS_SPL_ARGS_ADDR);
 249 #endif
 250         default:
 251                 debug("Unsupported OS image.. Jumping nevertheless..\n");
 252         }
 253 #if defined(CONFIG_SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE)
 254         debug("SPL malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr,
 255               gd->malloc_ptr / 1024);
 256 #endif
 257
 258         jump_to_image_no_args(&spl_image);
 259 }
 260
 261 /*
 262  * This requires UART clocks to be enabled.  In order for this to work the
 263  * caller must ensure that the gd pointer is valid.
 264  */
 265 void preloader_console_init(void)
 266 {
 267         gd->bd = &bdata;
 268         gd->baudrate = CONFIG_BAUDRATE;
 269
 270         serial_init();          /* serial communications setup */
 271
 272         gd->have_console = 1;
 273
 274         puts("\nU-Boot SPL " PLAIN_VERSION " (" U_BOOT_DATE " - " \
 275                         U_BOOT_TIME ")\n");
 276 #ifdef CONFIG_SPL_DISPLAY_PRINT
 277         spl_display_print();
 278 #endif
 279 }