]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - doc/README.blackfin
karo: tx28: explicitly configure pad config (voltage, pull, drive) for all pads
[karo-tx-uboot.git] / doc / README.blackfin
1 Notes for the Blackfin architecture port of Das U-Boot
2
3  =========
4  ! ABOUT !
5  =========
6
7 <marketing blurb>
8 Blackfin Processors embody a new breed of 16/32-bit embedded processor, ideally
9 suited for products where a convergence of capabilities are necessary -
10 multi-format audio, video, voice and image processing; multi-mode baseband and
11 packet processing; control processing; and real-time security.  The Blackfin's
12 unique combination of software flexibility and scalability has gained it
13 widespread adoption in convergent applications.
14 </marketing blurb>
15
16 The Blackfin processor is wholly developed by Analog Devices Inc.
17
18  ===========
19  ! SUPPORT !
20  ===========
21
22 All open source code for the Blackfin processors are being handled via our
23 collaborative website:
24 http://blackfin.uclinux.org/
25
26 In particular, bug reports, feature requests, help etc... for Das U-Boot are
27 handled in the Das U-Boot sub project:
28 http://blackfin.uclinux.org/gf/project/u-boot
29
30 This website is backed both by an open source community as well as a dedicated
31 team from Analog Devices Inc.
32
33  =============
34  ! TOOLCHAIN !
35  =============
36
37 To compile the Blackfin aspects, you'll need the GNU toolchain configured for
38 the Blackfin processor.  You can obtain such a cross-compiler here:
39 http://blackfin.uclinux.org/gf/project/toolchain
40
41  =================
42  ! DOCUMENTATION !
43  =================
44
45 For Blackfin specific documentation, you can visit our dedicated doc wiki:
46 http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot