]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - doc/README.mips
net: fec: use correct sizes to clear and flush descriptors
[karo-tx-uboot.git] / doc / README.mips
1
2 Notes for the MIPS architecture port of U-Boot
3
4 Toolchains
5 ----------
6
7   http://www.denx.de/wiki/DULG/ELDK
8   ELDK < DULG < DENX
9
10   http://www.emdebian.org/crosstools.html
11   Embedded Debian -- Cross-development toolchains
12
13   http://buildroot.uclibc.org/
14   Buildroot
15
16 Known Issues
17 ------------
18
19   * Cache incoherency issue caused by do_bootelf_exec() at cmd_elf.c
20
21     Cache will be disabled before entering the loaded ELF image without
22     writing back and invalidating cache lines. This leads to cache
23     incoherency in most cases, unless the code gets loaded after U-Boot
24     re-initializes the cache. The more common uImage 'bootm' command does
25     not suffer this problem.
26
27     [workaround] To avoid this cache incoherency,
28     1) insert flush_cache(all) before calling dcache_disable(), or
29     2) fix dcache_disable() to do both flushing and disabling cache.
30
31   * Note that Linux users need to kill dcache_disable() in do_bootelf_exec()
32     or override do_bootelf_exec() not to disable I-/D-caches, because most
33     Linux/MIPS ports don't re-enable caches after entering kernel_entry.
34
35 TODOs
36 -----
37
38   * Probe CPU types, I-/D-cache and TLB size etc. automatically
39
40   * Secondary cache support missing
41
42   * Initialize TLB entries redardless of their use
43
44   * R2000/R3000 class parts are not supported
45
46   * Limited testing across different MIPS variants
47
48   * Due to cache initialization issues, the DRAM on board must be
49     initialized in board specific assembler language before the cache init
50     code is run -- that is, initialize the DRAM in lowlevel_init().
51
52   * centralize/share more CPU code of MIPS32, MIPS64 and XBurst
53
54   * support Qemu Malta