1 * MTD SPI driver for serial flash chips
4 - #address-cells, #size-cells : Must be present if the device has sub-nodes
5 representing partitions.
6 - compatible : Should be the manufacturer and the name of the chip. Bear in
7 mind that the DT binding is not U-Boot-only, but in case of
8 U-Boot, see spi_flash_params_table table in
9 drivers/mtd/spi/sf_params.c for the list of supported chips.
10 - reg : Chip-Select number
11 - spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
14 - memory-map : Address and size of the flash, if memory mapped. This may
15 apply to Intel chipsets, which tend to memory-map flash.
22 compatible = "spansion,m25p80";
24 spi-max-frequency = <40000000>;