]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/fpga/altera.c
Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'
[karo-tx-uboot.git] / drivers / fpga / altera.c
1 /*
2  * (C) Copyright 2003
3  * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de
4  *
5  * (C) Copyright 2002
6  * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 /*
12  *  Altera FPGA support
13  */
14 #include <common.h>
15 #include <ACEX1K.h>
16 #include <stratixII.h>
17
18 /* Define FPGA_DEBUG to get debug printf's */
19 /* #define FPGA_DEBUG */
20
21 #ifdef  FPGA_DEBUG
22 #define PRINTF(fmt,args...)     printf (fmt ,##args)
23 #else
24 #define PRINTF(fmt,args...)
25 #endif
26
27 /* Local Static Functions */
28 static int altera_validate (Altera_desc * desc, const char *fn);
29
30 /* ------------------------------------------------------------------------- */
31 int altera_load(Altera_desc *desc, const void *buf, size_t bsize)
32 {
33         int ret_val = FPGA_FAIL;        /* assume a failure */
34
35         if (!altera_validate (desc, (char *)__FUNCTION__)) {
36                 printf ("%s: Invalid device descriptor\n", __FUNCTION__);
37         } else {
38                 switch (desc->family) {
39                 case Altera_ACEX1K:
40                 case Altera_CYC2:
41 #if defined(CONFIG_FPGA_ACEX1K)
42                         PRINTF ("%s: Launching the ACEX1K Loader...\n",
43                                         __FUNCTION__);
44                         ret_val = ACEX1K_load (desc, buf, bsize);
45 #elif defined(CONFIG_FPGA_CYCLON2)
46                         PRINTF ("%s: Launching the CYCLONE II Loader...\n",
47                                         __FUNCTION__);
48                         ret_val = CYC2_load (desc, buf, bsize);
49 #else
50                         printf ("%s: No support for ACEX1K devices.\n",
51                                         __FUNCTION__);
52 #endif
53                         break;
54
55 #if defined(CONFIG_FPGA_STRATIX_II)
56                 case Altera_StratixII:
57                         PRINTF ("%s: Launching the Stratix II Loader...\n",
58                                 __FUNCTION__);
59                         ret_val = StratixII_load (desc, buf, bsize);
60                         break;
61 #endif
62                 default:
63                         printf ("%s: Unsupported family type, %d\n",
64                                         __FUNCTION__, desc->family);
65                 }
66         }
67
68         return ret_val;
69 }
70
71 int altera_dump(Altera_desc *desc, const void *buf, size_t bsize)
72 {
73         int ret_val = FPGA_FAIL;        /* assume a failure */
74
75         if (!altera_validate (desc, (char *)__FUNCTION__)) {
76                 printf ("%s: Invalid device descriptor\n", __FUNCTION__);
77         } else {
78                 switch (desc->family) {
79                 case Altera_ACEX1K:
80 #if defined(CONFIG_FPGA_ACEX)
81                         PRINTF ("%s: Launching the ACEX1K Reader...\n",
82                                         __FUNCTION__);
83                         ret_val = ACEX1K_dump (desc, buf, bsize);
84 #else
85                         printf ("%s: No support for ACEX1K devices.\n",
86                                         __FUNCTION__);
87 #endif
88                         break;
89
90 #if defined(CONFIG_FPGA_STRATIX_II)
91                 case Altera_StratixII:
92                         PRINTF ("%s: Launching the Stratix II Reader...\n",
93                                 __FUNCTION__);
94                         ret_val = StratixII_dump (desc, buf, bsize);
95                         break;
96 #endif
97                 default:
98                         printf ("%s: Unsupported family type, %d\n",
99                                         __FUNCTION__, desc->family);
100                 }
101         }
102
103         return ret_val;
104 }
105
106 int altera_info( Altera_desc *desc )
107 {
108         int ret_val = FPGA_FAIL;
109
110         if (altera_validate (desc, (char *)__FUNCTION__)) {
111                 printf ("Family:        \t");
112                 switch (desc->family) {
113                 case Altera_ACEX1K:
114                         printf ("ACEX1K\n");
115                         break;
116                 case Altera_CYC2:
117                         printf ("CYCLON II\n");
118                         break;
119                 case Altera_StratixII:
120                         printf ("Stratix II\n");
121                         break;
122                         /* Add new family types here */
123                 default:
124                         printf ("Unknown family type, %d\n", desc->family);
125                 }
126
127                 printf ("Interface type:\t");
128                 switch (desc->iface) {
129                 case passive_serial:
130                         printf ("Passive Serial (PS)\n");
131                         break;
132                 case passive_parallel_synchronous:
133                         printf ("Passive Parallel Synchronous (PPS)\n");
134                         break;
135                 case passive_parallel_asynchronous:
136                         printf ("Passive Parallel Asynchronous (PPA)\n");
137                         break;
138                 case passive_serial_asynchronous:
139                         printf ("Passive Serial Asynchronous (PSA)\n");
140                         break;
141                 case altera_jtag_mode:          /* Not used */
142                         printf ("JTAG Mode\n");
143                         break;
144                 case fast_passive_parallel:
145                         printf ("Fast Passive Parallel (FPP)\n");
146                         break;
147                 case fast_passive_parallel_security:
148                         printf
149                             ("Fast Passive Parallel with Security (FPPS) \n");
150                         break;
151                         /* Add new interface types here */
152                 default:
153                         printf ("Unsupported interface type, %d\n", desc->iface);
154                 }
155
156                 printf("Device Size:   \t%zd bytes\n"
157                       "Cookie:        \t0x%x (%d)\n",
158                       desc->size, desc->cookie, desc->cookie);
159
160                 if (desc->iface_fns) {
161                         printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
162                         switch (desc->family) {
163                         case Altera_ACEX1K:
164                         case Altera_CYC2:
165 #if defined(CONFIG_FPGA_ACEX1K)
166                                 ACEX1K_info (desc);
167 #elif defined(CONFIG_FPGA_CYCLON2)
168                                 CYC2_info (desc);
169 #else
170                                 /* just in case */
171                                 printf ("%s: No support for ACEX1K devices.\n",
172                                                 __FUNCTION__);
173 #endif
174                                 break;
175 #if defined(CONFIG_FPGA_STRATIX_II)
176                         case Altera_StratixII:
177                                 StratixII_info (desc);
178                                 break;
179 #endif
180                                 /* Add new family types here */
181                         default:
182                                 /* we don't need a message here - we give one up above */
183                                 break;
184                         }
185                 } else {
186                         printf ("No Device Function Table.\n");
187                 }
188
189                 ret_val = FPGA_SUCCESS;
190         } else {
191                 printf ("%s: Invalid device descriptor\n", __FUNCTION__);
192         }
193
194         return ret_val;
195 }
196
197 /* ------------------------------------------------------------------------- */
198
199 static int altera_validate (Altera_desc * desc, const char *fn)
200 {
201         int ret_val = false;
202
203         if (desc) {
204                 if ((desc->family > min_altera_type) &&
205                         (desc->family < max_altera_type)) {
206                         if ((desc->iface > min_altera_iface_type) &&
207                                 (desc->iface < max_altera_iface_type)) {
208                                 if (desc->size) {
209                                         ret_val = true;
210                                 } else {
211                                         printf ("%s: NULL part size\n", fn);
212                                 }
213                         } else {
214                                 printf ("%s: Invalid Interface type, %d\n",
215                                         fn, desc->iface);
216                         }
217                 } else {
218                         printf ("%s: Invalid family type, %d\n", fn, desc->family);
219                 }
220         } else {
221                 printf ("%s: NULL descriptor!\n", fn);
222         }
223
224         return ret_val;
225 }
226
227 /* ------------------------------------------------------------------------- */