]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/i2c/mxc_i2c.c
config: rename CONFIG_MX* to CONFIG_SOC_MX*
[karo-tx-uboot.git] / drivers / i2c / mxc_i2c.c
1 /*
2  * i2c driver for Freescale i.MX series
3  *
4  * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
5  * (c) 2011 Marek Vasut <marek.vasut@gmail.com>
6  *
7  * Based on i2c-imx.c from linux kernel:
8  *  Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de>
9  *  Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de>
10  *  Copyright (C) 2007 RightHand Technologies, Inc.
11  *  Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
12  *
13  *
14  * SPDX-License-Identifier:     GPL-2.0+
15  */
16
17 #include <common.h>
18 #include <asm/arch/clock.h>
19 #include <asm/arch/imx-regs.h>
20 #include <asm/errno.h>
21 #include <asm/io.h>
22 #include <i2c.h>
23 #include <watchdog.h>
24
25 DECLARE_GLOBAL_DATA_PTR;
26
27 #ifdef I2C_QUIRK_REG
28 struct mxc_i2c_regs {
29         uint8_t         iadr;
30         uint8_t         ifdr;
31         uint8_t         i2cr;
32         uint8_t         i2sr;
33         uint8_t         i2dr;
34 };
35 #else
36 struct mxc_i2c_regs {
37         uint32_t        iadr;
38         uint32_t        ifdr;
39         uint32_t        i2cr;
40         uint32_t        i2sr;
41         uint32_t        i2dr;
42 };
43 #endif
44
45 #define I2CR_IIEN       (1 << 6)
46 #define I2CR_MSTA       (1 << 5)
47 #define I2CR_MTX        (1 << 4)
48 #define I2CR_TX_NO_AK   (1 << 3)
49 #define I2CR_RSTA       (1 << 2)
50
51 #define I2SR_ICF        (1 << 7)
52 #define I2SR_IBB        (1 << 5)
53 #define I2SR_IAL        (1 << 4)
54 #define I2SR_IIF        (1 << 1)
55 #define I2SR_RX_NO_AK   (1 << 0)
56
57 #ifdef I2C_QUIRK_REG
58 #define I2CR_IEN        (0 << 7)
59 #define I2CR_IDIS       (1 << 7)
60 #define I2SR_IIF_CLEAR  (1 << 1)
61 #else
62 #define I2CR_IEN        (1 << 7)
63 #define I2CR_IDIS       (0 << 7)
64 #define I2SR_IIF_CLEAR  (0 << 1)
65 #endif
66
67 #if defined(CONFIG_HARD_I2C) && !defined(CONFIG_SYS_I2C_BASE)
68 #error "define CONFIG_SYS_I2C_BASE to use the mxc_i2c driver"
69 #endif
70
71 #ifdef I2C_QUIRK_REG
72 static u16 i2c_clk_div[60][2] = {
73         { 20,   0x00 }, { 22,   0x01 }, { 24,   0x02 }, { 26,   0x03 },
74         { 28,   0x04 }, { 30,   0x05 }, { 32,   0x09 }, { 34,   0x06 },
75         { 36,   0x0A }, { 40,   0x07 }, { 44,   0x0C }, { 48,   0x0D },
76         { 52,   0x43 }, { 56,   0x0E }, { 60,   0x45 }, { 64,   0x12 },
77         { 68,   0x0F }, { 72,   0x13 }, { 80,   0x14 }, { 88,   0x15 },
78         { 96,   0x19 }, { 104,  0x16 }, { 112,  0x1A }, { 128,  0x17 },
79         { 136,  0x4F }, { 144,  0x1C }, { 160,  0x1D }, { 176,  0x55 },
80         { 192,  0x1E }, { 208,  0x56 }, { 224,  0x22 }, { 228,  0x24 },
81         { 240,  0x1F }, { 256,  0x23 }, { 288,  0x5C }, { 320,  0x25 },
82         { 384,  0x26 }, { 448,  0x2A }, { 480,  0x27 }, { 512,  0x2B },
83         { 576,  0x2C }, { 640,  0x2D }, { 768,  0x31 }, { 896,  0x32 },
84         { 960,  0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
85         { 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
86         { 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
87         { 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
88 };
89 #else
90 static u16 i2c_clk_div[50][2] = {
91         { 22,   0x20 }, { 24,   0x21 }, { 26,   0x22 }, { 28,   0x23 },
92         { 30,   0x00 }, { 32,   0x24 }, { 36,   0x25 }, { 40,   0x26 },
93         { 42,   0x03 }, { 44,   0x27 }, { 48,   0x28 }, { 52,   0x05 },
94         { 56,   0x29 }, { 60,   0x06 }, { 64,   0x2A }, { 72,   0x2B },
95         { 80,   0x2C }, { 88,   0x09 }, { 96,   0x2D }, { 104,  0x0A },
96         { 112,  0x2E }, { 128,  0x2F }, { 144,  0x0C }, { 160,  0x30 },
97         { 192,  0x31 }, { 224,  0x32 }, { 240,  0x0F }, { 256,  0x33 },
98         { 288,  0x10 }, { 320,  0x34 }, { 384,  0x35 }, { 448,  0x36 },
99         { 480,  0x13 }, { 512,  0x37 }, { 576,  0x14 }, { 640,  0x38 },
100         { 768,  0x39 }, { 896,  0x3A }, { 960,  0x17 }, { 1024, 0x3B },
101         { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
102         { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
103         { 3072, 0x1E }, { 3840, 0x1F }
104 };
105 #endif
106
107
108 #ifndef CONFIG_SYS_MXC_I2C1_SPEED
109 #define CONFIG_SYS_MXC_I2C1_SPEED 100000
110 #endif
111 #ifndef CONFIG_SYS_MXC_I2C2_SPEED
112 #define CONFIG_SYS_MXC_I2C2_SPEED 100000
113 #endif
114 #ifndef CONFIG_SYS_MXC_I2C3_SPEED
115 #define CONFIG_SYS_MXC_I2C3_SPEED 100000
116 #endif
117
118 #ifndef CONFIG_SYS_MXC_I2C1_SLAVE
119 #define CONFIG_SYS_MXC_I2C1_SLAVE 0
120 #endif
121 #ifndef CONFIG_SYS_MXC_I2C2_SLAVE
122 #define CONFIG_SYS_MXC_I2C2_SLAVE 0
123 #endif
124 #ifndef CONFIG_SYS_MXC_I2C3_SLAVE
125 #define CONFIG_SYS_MXC_I2C3_SLAVE 0
126 #endif
127
128
129 /*
130  * Calculate and set proper clock divider
131  */
132 static uint8_t i2c_imx_get_clk(unsigned int rate)
133 {
134         unsigned int i2c_clk_rate;
135         unsigned int div;
136         u8 clk_div;
137
138 #if defined(CONFIG_SOC_MX31)
139         struct clock_control_regs *sc_regs =
140                 (struct clock_control_regs *)CCM_BASE;
141
142         /* start the required I2C clock */
143         writel(readl(&sc_regs->cgr0) | (3 << CONFIG_SYS_I2C_CLK_OFFSET),
144                 &sc_regs->cgr0);
145 #endif
146
147         /* Divider value calculation */
148         i2c_clk_rate = mxc_get_clock(MXC_I2C_CLK);
149         div = (i2c_clk_rate + rate - 1) / rate;
150         if (div < i2c_clk_div[0][0])
151                 clk_div = 0;
152         else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
153                 clk_div = ARRAY_SIZE(i2c_clk_div) - 1;
154         else
155                 for (clk_div = 0; i2c_clk_div[clk_div][0] < div; clk_div++)
156                         ;
157
158         /* Store divider value */
159         return clk_div;
160 }
161
162 /*
163  * Set I2C Bus speed
164  */
165 static int bus_i2c_set_bus_speed(void *base, int speed)
166 {
167         struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
168         u8 clk_idx = i2c_imx_get_clk(speed);
169         u8 idx = i2c_clk_div[clk_idx][1];
170
171         /* Store divider value */
172         writeb(idx, &i2c_regs->ifdr);
173
174         /* Reset module */
175         writeb(I2CR_IDIS, &i2c_regs->i2cr);
176         writeb(0, &i2c_regs->i2sr);
177         return 0;
178 }
179
180 #define ST_BUS_IDLE (0 | (I2SR_IBB << 8))
181 #define ST_BUS_BUSY (I2SR_IBB | (I2SR_IBB << 8))
182 #define ST_IIF (I2SR_IIF | (I2SR_IIF << 8))
183
184 static int wait_for_sr_state(struct mxc_i2c_regs *i2c_regs, unsigned state)
185 {
186         unsigned sr;
187         ulong elapsed;
188         ulong start_time = get_timer(0);
189         for (;;) {
190                 sr = readb(&i2c_regs->i2sr);
191                 if (sr & I2SR_IAL) {
192 #ifdef I2C_QUIRK_REG
193                         writeb(sr | I2SR_IAL, &i2c_regs->i2sr);
194 #else
195                         writeb(sr & ~I2SR_IAL, &i2c_regs->i2sr);
196 #endif
197                         printf("%s: Arbitration lost sr=%x cr=%x state=%x\n",
198                                 __func__, sr, readb(&i2c_regs->i2cr), state);
199                         return -ERESTART;
200                 }
201                 if ((sr & (state >> 8)) == (unsigned char)state)
202                         return sr;
203                 WATCHDOG_RESET();
204                 elapsed = get_timer(start_time);
205                 if (elapsed > (CONFIG_SYS_HZ / 10))     /* .1 seconds */
206                         break;
207         }
208         printf("%s: failed sr=%x cr=%x state=%x\n", __func__,
209                         sr, readb(&i2c_regs->i2cr), state);
210         return -ETIMEDOUT;
211 }
212
213 static int tx_byte(struct mxc_i2c_regs *i2c_regs, u8 byte)
214 {
215         int ret;
216
217         writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
218         writeb(byte, &i2c_regs->i2dr);
219         ret = wait_for_sr_state(i2c_regs, ST_IIF);
220         if (ret < 0)
221                 return ret;
222         if (ret & I2SR_RX_NO_AK)
223                 return -ENODEV;
224         return 0;
225 }
226
227 /*
228  * Stop I2C transaction
229  */
230 static void i2c_imx_stop(struct mxc_i2c_regs *i2c_regs)
231 {
232         int ret;
233         unsigned int temp = readb(&i2c_regs->i2cr);
234
235         temp &= ~(I2CR_MSTA | I2CR_MTX);
236         writeb(temp, &i2c_regs->i2cr);
237         ret = wait_for_sr_state(i2c_regs, ST_BUS_IDLE);
238         if (ret < 0)
239                 printf("%s:trigger stop failed\n", __func__);
240 }
241
242 /*
243  * Send start signal, chip address and
244  * write register address
245  */
246 static int i2c_init_transfer_(struct mxc_i2c_regs *i2c_regs,
247                 uchar chip, uint addr, int alen)
248 {
249         unsigned int temp;
250         int ret;
251
252         /* Enable I2C controller */
253 #ifdef I2C_QUIRK_REG
254         if (readb(&i2c_regs->i2cr) & I2CR_IDIS) {
255 #else
256         if (!(readb(&i2c_regs->i2cr) & I2CR_IEN)) {
257 #endif
258                 writeb(I2CR_IEN, &i2c_regs->i2cr);
259                 /* Wait for controller to be stable */
260                 udelay(50);
261         }
262         if (readb(&i2c_regs->iadr) == (chip << 1))
263                 writeb((chip << 1) ^ 2, &i2c_regs->iadr);
264         writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
265         ret = wait_for_sr_state(i2c_regs, ST_BUS_IDLE);
266         if (ret < 0)
267                 return ret;
268
269         /* Start I2C transaction */
270         temp = readb(&i2c_regs->i2cr);
271         temp |= I2CR_MSTA;
272         writeb(temp, &i2c_regs->i2cr);
273
274         ret = wait_for_sr_state(i2c_regs, ST_BUS_BUSY);
275         if (ret < 0)
276                 return ret;
277
278         temp |= I2CR_MTX | I2CR_TX_NO_AK;
279         writeb(temp, &i2c_regs->i2cr);
280
281         /* write slave address */
282         ret = tx_byte(i2c_regs, chip << 1);
283         if (ret < 0)
284                 return ret;
285
286         while (alen--) {
287                 ret = tx_byte(i2c_regs, (addr >> (alen * 8)) & 0xff);
288                 if (ret < 0)
289                         return ret;
290         }
291         return 0;
292 }
293
294 static int i2c_idle_bus(void *base);
295
296 static int i2c_init_transfer(struct mxc_i2c_regs *i2c_regs,
297                 uchar chip, uint addr, int alen)
298 {
299         int retry;
300         int ret;
301         for (retry = 0; retry < 3; retry++) {
302                 ret = i2c_init_transfer_(i2c_regs, chip, addr, alen);
303                 if (ret >= 0)
304                         return 0;
305                 i2c_imx_stop(i2c_regs);
306                 if (ret == -ENODEV)
307                         return ret;
308
309                 printf("%s: failed for chip 0x%x retry=%d\n", __func__, chip,
310                                 retry);
311                 if (ret != -ERESTART)
312                         /* Disable controller */
313                         writeb(I2CR_IDIS, &i2c_regs->i2cr);
314                 udelay(100);
315                 if (i2c_idle_bus(i2c_regs) < 0)
316                         break;
317         }
318         printf("%s: give up i2c_regs=%p\n", __func__, i2c_regs);
319         return ret;
320 }
321
322 /*
323  * Read data from I2C device
324  */
325 int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf,
326                 int len)
327 {
328         int ret;
329         unsigned int temp;
330         int i;
331         struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
332
333         ret = i2c_init_transfer(i2c_regs, chip, addr, alen);
334         if (ret < 0)
335                 return ret;
336
337         temp = readb(&i2c_regs->i2cr);
338         temp |= I2CR_RSTA;
339         writeb(temp, &i2c_regs->i2cr);
340
341         ret = tx_byte(i2c_regs, (chip << 1) | 1);
342         if (ret < 0) {
343                 i2c_imx_stop(i2c_regs);
344                 return ret;
345         }
346
347         /* setup bus to read data */
348         temp = readb(&i2c_regs->i2cr);
349         temp &= ~(I2CR_MTX | I2CR_TX_NO_AK);
350         if (len == 1)
351                 temp |= I2CR_TX_NO_AK;
352         writeb(temp, &i2c_regs->i2cr);
353         writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
354         readb(&i2c_regs->i2dr);         /* dummy read to clear ICF */
355
356         /* read data */
357         for (i = 0; i < len; i++) {
358                 ret = wait_for_sr_state(i2c_regs, ST_IIF);
359                 if (ret < 0) {
360                         i2c_imx_stop(i2c_regs);
361                         return ret;
362                 }
363
364                 /*
365                  * It must generate STOP before read I2DR to prevent
366                  * controller from generating another clock cycle
367                  */
368                 if (i == (len - 1)) {
369                         i2c_imx_stop(i2c_regs);
370                 } else if (i == (len - 2)) {
371                         temp = readb(&i2c_regs->i2cr);
372                         temp |= I2CR_TX_NO_AK;
373                         writeb(temp, &i2c_regs->i2cr);
374                 }
375                 writeb(I2SR_IIF_CLEAR, &i2c_regs->i2sr);
376                 buf[i] = readb(&i2c_regs->i2dr);
377         }
378         i2c_imx_stop(i2c_regs);
379         return 0;
380 }
381
382 /*
383  * Write data to I2C device
384  */
385 int bus_i2c_write(void *base, uchar chip, uint addr, int alen,
386                 const uchar *buf, int len)
387 {
388         int ret;
389         int i;
390         struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base;
391
392         ret = i2c_init_transfer(i2c_regs, chip, addr, alen);
393         if (ret < 0)
394                 return ret;
395
396         for (i = 0; i < len; i++) {
397                 ret = tx_byte(i2c_regs, buf[i]);
398                 if (ret < 0)
399                         break;
400         }
401         i2c_imx_stop(i2c_regs);
402         return ret;
403 }
404
405 static void * const i2c_bases[] = {
406 #if defined(CONFIG_SOC_MX25)
407         (void *)IMX_I2C_BASE,
408         (void *)IMX_I2C2_BASE,
409         (void *)IMX_I2C3_BASE
410 #elif defined(CONFIG_SOC_MX27)
411         (void *)IMX_I2C1_BASE,
412         (void *)IMX_I2C2_BASE
413 #elif defined(CONFIG_SOC_MX31) || defined(CONFIG_SOC_MX35) || \
414         defined(CONFIG_SOC_MX51) || defined(CONFIG_SOC_MX53) || \
415         defined(CONFIG_SOC_MX6) || defined(CONFIG_SOC_LS102XA)
416         (void *)I2C1_BASE_ADDR,
417         (void *)I2C2_BASE_ADDR,
418         (void *)I2C3_BASE_ADDR
419 #elif defined(CONFIG_SOC_VF610)
420         (void *)I2C0_BASE_ADDR
421 #elif defined(CONFIG_FSL_LSCH3)
422         (void *)I2C1_BASE_ADDR,
423         (void *)I2C2_BASE_ADDR,
424         (void *)I2C3_BASE_ADDR,
425         (void *)I2C4_BASE_ADDR
426 #else
427 #error "architecture not supported"
428 #endif
429 };
430
431 struct i2c_parms {
432         void *base;
433         void *idle_bus_data;
434         int (*idle_bus_fn)(void *p);
435 };
436
437 struct sram_data {
438         unsigned curr_i2c_bus;
439         struct i2c_parms i2c_data[ARRAY_SIZE(i2c_bases)];
440 };
441
442 void *i2c_get_base(struct i2c_adapter *adap)
443 {
444         return i2c_bases[adap->hwadapnr];
445 }
446
447 static struct i2c_parms *i2c_get_parms(void *base)
448 {
449         struct sram_data *srdata = (void *)gd->srdata;
450         int i = 0;
451         struct i2c_parms *p = srdata->i2c_data;
452         while (i < ARRAY_SIZE(srdata->i2c_data)) {
453                 if (p->base == base)
454                         return p;
455                 p++;
456                 i++;
457         }
458         printf("Invalid I2C base: %p\n", base);
459         return NULL;
460 }
461
462 static int i2c_idle_bus(void *base)
463 {
464         struct i2c_parms *p = i2c_get_parms(base);
465         if (p && p->idle_bus_fn)
466                 return p->idle_bus_fn(p->idle_bus_data);
467         return 0;
468 }
469
470 static int mxc_i2c_read(struct i2c_adapter *adap, uint8_t chip,
471                                 uint addr, int alen, uint8_t *buffer,
472                                 int len)
473 {
474         return bus_i2c_read(i2c_get_base(adap), chip, addr, alen, buffer, len);
475 }
476
477 static int mxc_i2c_write(struct i2c_adapter *adap, uint8_t chip,
478                                 uint addr, int alen, uint8_t *buffer,
479                                 int len)
480 {
481         return bus_i2c_write(i2c_get_base(adap), chip, addr, alen, buffer, len);
482 }
483
484 /*
485  * Test if a chip at a given address responds (probe the chip)
486  */
487 static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
488 {
489         return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0);
490 }
491
492 void bus_i2c_init(void *base, int speed, int unused,
493                 int (*idle_bus_fn)(void *p), void *idle_bus_data)
494 {
495         struct sram_data *srdata = (void *)gd->srdata;
496         int i = 0;
497         struct i2c_parms *p = srdata->i2c_data;
498         if (!base)
499                 return;
500         for (;;) {
501                 if (!p->base || (p->base == base)) {
502                         p->base = base;
503                         if (idle_bus_fn) {
504                                 p->idle_bus_fn = idle_bus_fn;
505                                 p->idle_bus_data = idle_bus_data;
506                         }
507                         break;
508                 }
509                 p++;
510                 i++;
511                 if (i >= ARRAY_SIZE(srdata->i2c_data))
512                         return;
513         }
514         bus_i2c_set_bus_speed(base, speed);
515 }
516
517 /*
518  * Init I2C Bus
519  */
520 static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
521 {
522         bus_i2c_init(i2c_get_base(adap), speed, slaveaddr, NULL, NULL);
523 }
524
525 /*
526  * Set I2C Speed
527  */
528 static uint mxc_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
529 {
530         return bus_i2c_set_bus_speed(i2c_get_base(adap), speed);
531 }
532
533 /*
534  * Register mxc i2c adapters
535  */
536 U_BOOT_I2C_ADAP_COMPLETE(mxc0, mxc_i2c_init, mxc_i2c_probe,
537                          mxc_i2c_read, mxc_i2c_write,
538                          mxc_i2c_set_bus_speed,
539                          CONFIG_SYS_MXC_I2C1_SPEED,
540                          CONFIG_SYS_MXC_I2C1_SLAVE, 0)
541 U_BOOT_I2C_ADAP_COMPLETE(mxc1, mxc_i2c_init, mxc_i2c_probe,
542                          mxc_i2c_read, mxc_i2c_write,
543                          mxc_i2c_set_bus_speed,
544                          CONFIG_SYS_MXC_I2C2_SPEED,
545                          CONFIG_SYS_MXC_I2C2_SLAVE, 1)
546 #if defined(CONFIG_SOC_MX31) || defined(CONFIG_SOC_MX35) ||\
547         defined(CONFIG_SOC_MX51) || defined(CONFIG_SOC_MX53) ||\
548         defined(CONFIG_SOC_MX6) || defined(CONFIG_SOC_LS102XA)
549 U_BOOT_I2C_ADAP_COMPLETE(mxc2, mxc_i2c_init, mxc_i2c_probe,
550                          mxc_i2c_read, mxc_i2c_write,
551                          mxc_i2c_set_bus_speed,
552                          CONFIG_SYS_MXC_I2C3_SPEED,
553                          CONFIG_SYS_MXC_I2C3_SLAVE, 2)
554 #endif