drivers/net/davinci_emac.c

   1 /*
   2  * Ethernet driver for TI TMS320DM644x (DaVinci) chips.
   3  *
   4  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   5  *
   6  * Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright
   7  * follows:
   8  *
   9  * ----------------------------------------------------------------------------
  10  *
  11  * dm644x_emac.c
  12  *
  13  * TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM
  14  *
  15  * Copyright (C) 2005 Texas Instruments.
  16  *
  17  * ----------------------------------------------------------------------------
  18  *
  19  * This program is free software; you can redistribute it and/or modify
  20  * it under the terms of the GNU General Public License as published by
  21  * the Free Software Foundation; either version 2 of the License, or
  22  * (at your option) any later version.
  23  *
  24  * This program is distributed in the hope that it will be useful,
  25  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  26  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  27  * GNU General Public License for more details.
  28  *
  29  *  You should have received a copy of the GNU General Public License
  30  *  along with this program; if not, write to the Free Software
  31  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  32  * ----------------------------------------------------------------------------
  33
  34  * Modifications:
  35  * ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot.
  36  * ver  1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors
  37  *
  38  */
  39 #include <common.h>
  40 #include <command.h>
  41 #include <net.h>
  42 #include <miiphy.h>
  43 #include <malloc.h>
  44 #include <linux/compiler.h>
  45 #include <asm/arch/emac_defs.h>
  46 #include <asm/io.h>
  47 #include "davinci_emac.h"
  48
  49 unsigned int    emac_dbg = 0;
  50 #define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
  51
  52 #ifdef EMAC_HW_RAM_ADDR
  53 static inline unsigned long BD_TO_HW(unsigned long x)
  54 {
  55         if (x == 0)
  56                 return 0;
  57
  58         return x - EMAC_WRAPPER_RAM_ADDR + EMAC_HW_RAM_ADDR;
  59 }
  60
  61 static inline unsigned long HW_TO_BD(unsigned long x)
  62 {
  63         if (x == 0)
  64                 return 0;
  65
  66         return x - EMAC_HW_RAM_ADDR + EMAC_WRAPPER_RAM_ADDR;
  67 }
  68 #else
  69 #define BD_TO_HW(x)     (x)
  70 #define HW_TO_BD(x)     (x)
  71 #endif
  72
  73 #ifdef DAVINCI_EMAC_GIG_ENABLE
  74 #define emac_gigabit_enable(phy_addr)   davinci_eth_gigabit_enable(phy_addr)
  75 #else
  76 #define emac_gigabit_enable(phy_addr)   /* no gigabit to enable */
  77 #endif
  78
  79 #if !defined(CONFIG_SYS_EMAC_TI_CLKDIV)
  80 #define CONFIG_SYS_EMAC_TI_CLKDIV       ((EMAC_MDIO_BUS_FREQ / \
  81                 EMAC_MDIO_CLOCK_FREQ) - 1)
  82 #endif
  83
  84 static void davinci_eth_mdio_enable(void);
  85
  86 static int gen_init_phy(int phy_addr);
  87 static int gen_is_phy_connected(int phy_addr);
  88 static int gen_get_link_speed(int phy_addr);
  89 static int gen_auto_negotiate(int phy_addr);
  90
  91 void eth_mdio_enable(void)
  92 {
  93         davinci_eth_mdio_enable();
  94 }
  95
  96 /* EMAC Addresses */
  97 static volatile emac_regs       *adap_emac = (emac_regs *)EMAC_BASE_ADDR;
  98 static volatile ewrap_regs      *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
  99 static volatile mdio_regs       *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR;
 100
 101 /* EMAC descriptors */
 102 static volatile emac_desc       *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE);
 103 static volatile emac_desc       *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
 104 static volatile emac_desc       *emac_rx_active_head = 0;
 105 static volatile emac_desc       *emac_rx_active_tail = 0;
 106 static int                      emac_rx_queue_active = 0;
 107
 108 /* Receive packet buffers */
 109 static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * EMAC_RXBUF_SIZE]
 110                                 __aligned(ARCH_DMA_MINALIGN);
 111
 112 #ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
 113 #define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT       3
 114 #endif
 115
 116 /* PHY address for a discovered PHY (0xff - not found) */
 117 static u_int8_t active_phy_addr[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
 118
 119 /* number of PHY found active */
 120 static u_int8_t num_phy;
 121
 122 phy_t                           phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
 123
 124 static inline void davinci_flush_rx_descs(void)
 125 {
 126         /* flush the whole RX descs area */
 127         flush_dcache_range(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE,
 128                         EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
 129 }
 130
 131 static inline void davinci_invalidate_rx_descs(void)
 132 {
 133         /* invalidate the whole RX descs area */
 134         invalidate_dcache_range(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE,
 135                         EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
 136 }
 137
 138 static inline void davinci_flush_desc(emac_desc *desc)
 139 {
 140         flush_dcache_range((unsigned long)desc,
 141                         (unsigned long)desc + sizeof(*desc));
 142 }
 143
 144 static int davinci_eth_set_mac_addr(struct eth_device *dev)
 145 {
 146         unsigned long           mac_hi;
 147         unsigned long           mac_lo;
 148
 149         /*
 150          * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
 151          * receive)
 152          *  Using channel 0 only - other channels are disabled
 153          *  */
 154         writel(0, &adap_emac->MACINDEX);
 155         mac_hi = (dev->enetaddr[3] << 24) |
 156                  (dev->enetaddr[2] << 16) |
 157                  (dev->enetaddr[1] << 8)  |
 158                  (dev->enetaddr[0]);
 159         mac_lo = (dev->enetaddr[5] << 8) |
 160                  (dev->enetaddr[4]);
 161
 162         writel(mac_hi, &adap_emac->MACADDRHI);
 163 #if defined(DAVINCI_EMAC_VERSION2)
 164         writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
 165                &adap_emac->MACADDRLO);
 166 #else
 167         writel(mac_lo, &adap_emac->MACADDRLO);
 168 #endif
 169
 170         writel(0, &adap_emac->MACHASH1);
 171         writel(0, &adap_emac->MACHASH2);
 172
 173         /* Set source MAC address - REQUIRED */
 174         writel(mac_hi, &adap_emac->MACSRCADDRHI);
 175         writel(mac_lo, &adap_emac->MACSRCADDRLO);
 176
 177
 178         return 0;
 179 }
 180
 181 static void davinci_eth_mdio_enable(void)
 182 {
 183         u_int32_t       clkdiv;
 184
 185         clkdiv = CONFIG_SYS_EMAC_TI_CLKDIV;
 186
 187         writel((clkdiv & 0xff) |
 188                MDIO_CONTROL_ENABLE |
 189                MDIO_CONTROL_FAULT |
 190                MDIO_CONTROL_FAULT_ENABLE,
 191                &adap_mdio->CONTROL);
 192
 193         while (readl(&adap_mdio->CONTROL) & MDIO_CONTROL_IDLE)
 194                 ;
 195 }
 196
 197 /*
 198  * Tries to find an active connected PHY. Returns 1 if address if found.
 199  * If no active PHY (or more than one PHY) found returns 0.
 200  * Sets active_phy_addr variable.
 201  */
 202 static int davinci_eth_phy_detect(void)
 203 {
 204         u_int32_t       phy_act_state;
 205         int             i;
 206         int             j;
 207         unsigned int    count = 0;
 208
 209         for (i = 0; i < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT; i++)
 210                 active_phy_addr[i] = 0xff;
 211
 212         udelay(1000);
 213         phy_act_state = readl(&adap_mdio->ALIVE);
 214
 215         if (phy_act_state == 0)
 216                 return 0;               /* No active PHYs */
 217
 218         debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
 219
 220         for (i = 0, j = 0; i < 32; i++)
 221                 if (phy_act_state & (1 << i)) {
 222                         count++;
 223                         if (count <= CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT) {
 224                                 active_phy_addr[j++] = i;
 225                         } else {
 226                                 printf("%s: to many PHYs detected.\n",
 227                                         __func__);
 228                                 count = 0;
 229                                 break;
 230                         }
 231                 }
 232
 233         num_phy = count;
 234
 235         return count;
 236 }
 237
 238
 239 /* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
 240 int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
 241 {
 242         int     tmp;
 243
 244         while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO)
 245                 ;
 246
 247         writel(MDIO_USERACCESS0_GO |
 248                MDIO_USERACCESS0_WRITE_READ |
 249                ((reg_num & 0x1f) << 21) |
 250                ((phy_addr & 0x1f) << 16),
 251                &adap_mdio->USERACCESS0);
 252
 253         /* Wait for command to complete */
 254         while ((tmp = readl(&adap_mdio->USERACCESS0)) & MDIO_USERACCESS0_GO)
 255                 ;
 256
 257         if (tmp & MDIO_USERACCESS0_ACK) {
 258                 *data = tmp & 0xffff;
 259                 return(1);
 260         }
 261
 262         *data = -1;
 263         return(0);
 264 }
 265
 266 /* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
 267 int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
 268 {
 269
 270         while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO)
 271                 ;
 272
 273         writel(MDIO_USERACCESS0_GO |
 274                MDIO_USERACCESS0_WRITE_WRITE |
 275                ((reg_num & 0x1f) << 21) |
 276                ((phy_addr & 0x1f) << 16) |
 277                (data & 0xffff),
 278                &adap_mdio->USERACCESS0);
 279
 280         /* Wait for command to complete */
 281         while (readl(&adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO)
 282                 ;
 283
 284         return(1);
 285 }
 286
 287 /* PHY functions for a generic PHY */
 288 static int gen_init_phy(int phy_addr)
 289 {
 290         int     ret = 1;
 291
 292         if (gen_get_link_speed(phy_addr)) {
 293                 /* Try another time */
 294                 ret = gen_get_link_speed(phy_addr);
 295         }
 296
 297         return(ret);
 298 }
 299
 300 static int gen_is_phy_connected(int phy_addr)
 301 {
 302         u_int16_t       dummy;
 303
 304         return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy);
 305 }
 306
 307 static int get_active_phy(void)
 308 {
 309         int i;
 310
 311         for (i = 0; i < num_phy; i++)
 312                 if (phy[i].get_link_speed(active_phy_addr[i]))
 313                         return i;
 314
 315         return -1;      /* Return error if no link */
 316 }
 317
 318 static int gen_get_link_speed(int phy_addr)
 319 {
 320         u_int16_t       tmp;
 321
 322         if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) &&
 323                         (tmp & 0x04)) {
 324 #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
 325                 defined(CONFIG_MACH_DAVINCI_DA850_EVM)
 326                 davinci_eth_phy_read(phy_addr, MII_LPA, &tmp);
 327
 328                 /* Speed doesn't matter, there is no setting for it in EMAC. */
 329                 if (tmp & (LPA_100FULL | LPA_10FULL)) {
 330                         /* set EMAC for Full Duplex  */
 331                         writel(EMAC_MACCONTROL_MIIEN_ENABLE |
 332                                         EMAC_MACCONTROL_FULLDUPLEX_ENABLE,
 333                                         &adap_emac->MACCONTROL);
 334                 } else {
 335                         /*set EMAC for Half Duplex  */
 336                         writel(EMAC_MACCONTROL_MIIEN_ENABLE,
 337                                         &adap_emac->MACCONTROL);
 338                 }
 339
 340                 if (tmp & (LPA_100FULL | LPA_100HALF))
 341                         writel(readl(&adap_emac->MACCONTROL) |
 342                                         EMAC_MACCONTROL_RMIISPEED_100,
 343                                          &adap_emac->MACCONTROL);
 344                 else
 345                         writel(readl(&adap_emac->MACCONTROL) &
 346                                         ~EMAC_MACCONTROL_RMIISPEED_100,
 347                                          &adap_emac->MACCONTROL);
 348 #endif
 349                 return(1);
 350         }
 351
 352         return(0);
 353 }
 354
 355 static int gen_auto_negotiate(int phy_addr)
 356 {
 357         u_int16_t       tmp;
 358         u_int16_t       val;
 359         unsigned long   cntr = 0;
 360
 361         if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
 362                 return 0;
 363
 364         val = tmp | BMCR_FULLDPLX | BMCR_ANENABLE |
 365                                                 BMCR_SPEED100;
 366         davinci_eth_phy_write(phy_addr, MII_BMCR, val);
 367
 368         if (!davinci_eth_phy_read(phy_addr, MII_ADVERTISE, &val))
 369                 return 0;
 370
 371         val |= (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL |
 372                                                         ADVERTISE_10HALF);
 373         davinci_eth_phy_write(phy_addr, MII_ADVERTISE, val);
 374
 375         if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
 376                 return(0);
 377
 378         /* Restart Auto_negotiation  */
 379         tmp |= BMCR_ANRESTART;
 380         davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
 381
 382         /*check AutoNegotiate complete */
 383         do {
 384                 udelay(40000);
 385                 if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
 386                         return 0;
 387
 388                 if (tmp & BMSR_ANEGCOMPLETE)
 389                         break;
 390
 391                 cntr++;
 392         } while (cntr < 200);
 393
 394         if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
 395                 return(0);
 396
 397         if (!(tmp & BMSR_ANEGCOMPLETE))
 398                 return(0);
 399
 400         return(gen_get_link_speed(phy_addr));
 401 }
 402 /* End of generic PHY functions */
 403
 404
 405 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 406 static int davinci_mii_phy_read(const char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
 407 {
 408         return(davinci_eth_phy_read(addr, reg, value) ? 0 : 1);
 409 }
 410
 411 static int davinci_mii_phy_write(const char *devname, unsigned char addr, unsigned char reg, unsigned short value)
 412 {
 413         return(davinci_eth_phy_write(addr, reg, value) ? 0 : 1);
 414 }
 415 #endif
 416
 417 static void  __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr)
 418 {
 419         u_int16_t data;
 420
 421         if (davinci_eth_phy_read(phy_addr, 0, &data)) {
 422                 if (data & (1 << 6)) { /* speed selection MSB */
 423                         /*
 424                          * Check if link detected is giga-bit
 425                          * If Gigabit mode detected, enable gigbit in MAC
 426                          */
 427                         writel(readl(&adap_emac->MACCONTROL) |
 428                                 EMAC_MACCONTROL_GIGFORCE |
 429                                 EMAC_MACCONTROL_GIGABIT_ENABLE,
 430                                 &adap_emac->MACCONTROL);
 431                 }
 432         }
 433 }
 434
 435 /* Eth device open */
 436 static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
 437 {
 438         dv_reg_p                addr;
 439         u_int32_t               clkdiv, cnt;
 440         volatile emac_desc      *rx_desc;
 441         int                     index;
 442
 443         debug_emac("+ emac_open\n");
 444
 445         /* Reset EMAC module and disable interrupts in wrapper */
 446         writel(1, &adap_emac->SOFTRESET);
 447         while (readl(&adap_emac->SOFTRESET) != 0)
 448                 ;
 449 #if defined(DAVINCI_EMAC_VERSION2)
 450         writel(1, &adap_ewrap->softrst);
 451         while (readl(&adap_ewrap->softrst) != 0)
 452                 ;
 453 #else
 454         writel(0, &adap_ewrap->EWCTL);
 455         for (cnt = 0; cnt < 5; cnt++) {
 456                 clkdiv = readl(&adap_ewrap->EWCTL);
 457         }
 458 #endif
 459
 460 #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
 461         defined(CONFIG_MACH_DAVINCI_DA850_EVM)
 462         adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0;
 463         adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0;
 464         adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0;
 465 #endif
 466         rx_desc = emac_rx_desc;
 467
 468         writel(1, &adap_emac->TXCONTROL);
 469         writel(1, &adap_emac->RXCONTROL);
 470
 471         davinci_eth_set_mac_addr(dev);
 472
 473         /* Set DMA 8 TX / 8 RX Head pointers to 0 */
 474         addr = &adap_emac->TX0HDP;
 475         for(cnt = 0; cnt < 16; cnt++)
 476                 writel(0, addr++);
 477
 478         addr = &adap_emac->RX0HDP;
 479         for(cnt = 0; cnt < 16; cnt++)
 480                 writel(0, addr++);
 481
 482         /* Clear Statistics (do this before setting MacControl register) */
 483         addr = &adap_emac->RXGOODFRAMES;
 484         for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++)
 485                 writel(0, addr++);
 486
 487         /* No multicast addressing */
 488         writel(0, &adap_emac->MACHASH1);
 489         writel(0, &adap_emac->MACHASH2);
 490
 491         /* Create RX queue and set receive process in place */
 492         emac_rx_active_head = emac_rx_desc;
 493         for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
 494                 rx_desc->next = BD_TO_HW((u_int32_t)(rx_desc + 1));
 495                 rx_desc->buffer = &emac_rx_buffers[cnt * EMAC_RXBUF_SIZE];
 496                 rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
 497                 rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
 498                 rx_desc++;
 499         }
 500
 501         /* Finalize the rx desc list */
 502         rx_desc--;
 503         rx_desc->next = 0;
 504         emac_rx_active_tail = rx_desc;
 505         emac_rx_queue_active = 1;
 506
 507         davinci_flush_rx_descs();
 508
 509         /* Enable TX/RX */
 510         writel(EMAC_MAX_ETHERNET_PKT_SIZE, &adap_emac->RXMAXLEN);
 511         writel(0, &adap_emac->RXBUFFEROFFSET);
 512
 513         /*
 514          * No fancy configs - Use this for promiscous debug
 515          *   - EMAC_RXMBPENABLE_RXCAFEN_ENABLE
 516          */
 517         writel(EMAC_RXMBPENABLE_RXBROADEN, &adap_emac->RXMBPENABLE);
 518
 519         /* Enable ch 0 only */
 520         writel(1, &adap_emac->RXUNICASTSET);
 521
 522         /* Enable MII interface and Full duplex mode */
 523 #if defined(CONFIG_SOC_DA8XX) || \
 524         (defined(CONFIG_OMAP34XX) && defined(CONFIG_DRIVER_TI_EMAC_USE_RMII))
 525         writel((EMAC_MACCONTROL_MIIEN_ENABLE |
 526                 EMAC_MACCONTROL_FULLDUPLEX_ENABLE |
 527                 EMAC_MACCONTROL_RMIISPEED_100),
 528                &adap_emac->MACCONTROL);
 529 #else
 530         writel((EMAC_MACCONTROL_MIIEN_ENABLE |
 531                 EMAC_MACCONTROL_FULLDUPLEX_ENABLE),
 532                &adap_emac->MACCONTROL);
 533 #endif
 534
 535         /* Init MDIO & get link state */
 536         clkdiv = CONFIG_SYS_EMAC_TI_CLKDIV;
 537         writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT,
 538                &adap_mdio->CONTROL);
 539
 540         /* We need to wait for MDIO to start */
 541         udelay(1000);
 542
 543         index = get_active_phy();
 544         if (index == -1)
 545                 return(0);
 546
 547         emac_gigabit_enable(active_phy_addr[index]);
 548
 549         /* Start receive process */
 550         writel(BD_TO_HW((u_int32_t)emac_rx_desc), &adap_emac->RX0HDP);
 551
 552         debug_emac("- emac_open\n");
 553
 554         return(1);
 555 }
 556
 557 /* EMAC Channel Teardown */
 558 static void davinci_eth_ch_teardown(int ch)
 559 {
 560         dv_reg          dly = 0xff;
 561         dv_reg          cnt;
 562
 563         debug_emac("+ emac_ch_teardown\n");
 564
 565         if (ch == EMAC_CH_TX) {
 566                 /* Init TX channel teardown */
 567                 writel(0, &adap_emac->TXTEARDOWN);
 568                 do {
 569                         /*
 570                          * Wait here for Tx teardown completion interrupt to
 571                          * occur. Note: A task delay can be called here to pend
 572                          * rather than occupying CPU cycles - anyway it has
 573                          * been found that teardown takes very few cpu cycles
 574                          * and does not affect functionality
 575                          */
 576                         dly--;
 577                         udelay(1);
 578                         if (dly == 0)
 579                                 break;
 580                         cnt = readl(&adap_emac->TX0CP);
 581                 } while (cnt != 0xfffffffc);
 582                 writel(cnt, &adap_emac->TX0CP);
 583                 writel(0, &adap_emac->TX0HDP);
 584         } else {
 585                 /* Init RX channel teardown */
 586                 writel(0, &adap_emac->RXTEARDOWN);
 587                 do {
 588                         /*
 589                          * Wait here for Rx teardown completion interrupt to
 590                          * occur. Note: A task delay can be called here to pend
 591                          * rather than occupying CPU cycles - anyway it has
 592                          * been found that teardown takes very few cpu cycles
 593                          * and does not affect functionality
 594                          */
 595                         dly--;
 596                         udelay(1);
 597                         if (dly == 0)
 598                                 break;
 599                         cnt = readl(&adap_emac->RX0CP);
 600                 } while (cnt != 0xfffffffc);
 601                 writel(cnt, &adap_emac->RX0CP);
 602                 writel(0, &adap_emac->RX0HDP);
 603         }
 604
 605         debug_emac("- emac_ch_teardown\n");
 606 }
 607
 608 /* Eth device close */
 609 static void davinci_eth_close(struct eth_device *dev)
 610 {
 611         debug_emac("+ emac_close\n");
 612
 613         davinci_eth_ch_teardown(EMAC_CH_TX);    /* TX Channel teardown */
 614         davinci_eth_ch_teardown(EMAC_CH_RX);    /* RX Channel teardown */
 615
 616         /* Reset EMAC module and disable interrupts in wrapper */
 617         writel(1, &adap_emac->SOFTRESET);
 618 #if defined(DAVINCI_EMAC_VERSION2)
 619         writel(1, &adap_ewrap->softrst);
 620 #else
 621         writel(0, &adap_ewrap->EWCTL);
 622 #endif
 623
 624 #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
 625         defined(CONFIG_MACH_DAVINCI_DA850_EVM)
 626         adap_ewrap->c0rxen = adap_ewrap->c1rxen = adap_ewrap->c2rxen = 0;
 627         adap_ewrap->c0txen = adap_ewrap->c1txen = adap_ewrap->c2txen = 0;
 628         adap_ewrap->c0miscen = adap_ewrap->c1miscen = adap_ewrap->c2miscen = 0;
 629 #endif
 630         debug_emac("- emac_close\n");
 631 }
 632
 633 static int tx_send_loop = 0;
 634
 635 /*
 636  * This function sends a single packet on the network and returns
 637  * positive number (number of bytes transmitted) or negative for error
 638  */
 639 static int davinci_eth_send_packet (struct eth_device *dev,
 640                                         void *packet, int length)
 641 {
 642         int ret_status = -1;
 643         int index;
 644         tx_send_loop = 0;
 645
 646         index = get_active_phy();
 647         if (index == -1) {
 648                 printf(" WARN: emac_send_packet: No link\n");
 649                 return (ret_status);
 650         }
 651
 652         emac_gigabit_enable(active_phy_addr[index]);
 653
 654         /* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */
 655         if (length < EMAC_MIN_ETHERNET_PKT_SIZE) {
 656                 length = EMAC_MIN_ETHERNET_PKT_SIZE;
 657         }
 658
 659         /* Populate the TX descriptor */
 660         emac_tx_desc->next = 0;
 661         emac_tx_desc->buffer = (u_int8_t *) packet;
 662         emac_tx_desc->buff_off_len = (length & 0xffff);
 663         emac_tx_desc->pkt_flag_len = ((length & 0xffff) |
 664                                       EMAC_CPPI_SOP_BIT |
 665                                       EMAC_CPPI_OWNERSHIP_BIT |
 666                                       EMAC_CPPI_EOP_BIT);
 667
 668         flush_dcache_range((unsigned long)packet,
 669                         (unsigned long)packet + length);
 670         davinci_flush_desc(emac_tx_desc);
 671
 672         /* Send the packet */
 673         writel(BD_TO_HW((unsigned long)emac_tx_desc), &adap_emac->TX0HDP);
 674
 675         /* Wait for packet to complete or link down */
 676         while (1) {
 677                 if (!phy[index].get_link_speed(active_phy_addr[index])) {
 678                         davinci_eth_ch_teardown (EMAC_CH_TX);
 679                         return (ret_status);
 680                 }
 681
 682                 emac_gigabit_enable(active_phy_addr[index]);
 683
 684                 if (readl(&adap_emac->TXINTSTATRAW) & 0x01) {
 685                         ret_status = length;
 686                         break;
 687                 }
 688                 tx_send_loop++;
 689         }
 690
 691         return (ret_status);
 692 }
 693
 694 /*
 695  * This function handles receipt of a packet from the network
 696  */
 697 static int davinci_eth_rcv_packet (struct eth_device *dev)
 698 {
 699         volatile emac_desc *rx_curr_desc;
 700         volatile emac_desc *curr_desc;
 701         volatile emac_desc *tail_desc;
 702         int status, ret = -1;
 703
 704         davinci_invalidate_rx_descs();
 705
 706         rx_curr_desc = emac_rx_active_head;
 707         status = rx_curr_desc->pkt_flag_len;
 708         if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) {
 709                 if (status & EMAC_CPPI_RX_ERROR_FRAME) {
 710                         /* Error in packet - discard it and requeue desc */
 711                         printf ("WARN: emac_rcv_pkt: Error in packet\n");
 712                 } else {
 713                         unsigned long tmp = (unsigned long)rx_curr_desc->buffer;
 714
 715                         invalidate_dcache_range(tmp, tmp + EMAC_RXBUF_SIZE);
 716                         NetReceive (rx_curr_desc->buffer,
 717                                     (rx_curr_desc->buff_off_len & 0xffff));
 718                         ret = rx_curr_desc->buff_off_len & 0xffff;
 719                 }
 720
 721                 /* Ack received packet descriptor */
 722                 writel(BD_TO_HW((ulong)rx_curr_desc), &adap_emac->RX0CP);
 723                 curr_desc = rx_curr_desc;
 724                 emac_rx_active_head =
 725                         (volatile emac_desc *) (HW_TO_BD(rx_curr_desc->next));
 726
 727                 if (status & EMAC_CPPI_EOQ_BIT) {
 728                         if (emac_rx_active_head) {
 729                                 writel(BD_TO_HW((ulong)emac_rx_active_head),
 730                                        &adap_emac->RX0HDP);
 731                         } else {
 732                                 emac_rx_queue_active = 0;
 733                                 printf ("INFO:emac_rcv_packet: RX Queue not active\n");
 734                         }
 735                 }
 736
 737                 /* Recycle RX descriptor */
 738                 rx_curr_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
 739                 rx_curr_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
 740                 rx_curr_desc->next = 0;
 741                 davinci_flush_desc(rx_curr_desc);
 742
 743                 if (emac_rx_active_head == 0) {
 744                         printf ("INFO: emac_rcv_pkt: active queue head = 0\n");
 745                         emac_rx_active_head = curr_desc;
 746                         emac_rx_active_tail = curr_desc;
 747                         if (emac_rx_queue_active != 0) {
 748                                 writel(BD_TO_HW((ulong)emac_rx_active_head),
 749                                        &adap_emac->RX0HDP);
 750                                 printf ("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
 751                                 emac_rx_queue_active = 1;
 752                         }
 753                 } else {
 754                         tail_desc = emac_rx_active_tail;
 755                         emac_rx_active_tail = curr_desc;
 756                         tail_desc->next = BD_TO_HW((ulong) curr_desc);
 757                         status = tail_desc->pkt_flag_len;
 758                         if (status & EMAC_CPPI_EOQ_BIT) {
 759                                 davinci_flush_desc(tail_desc);
 760                                 writel(BD_TO_HW((ulong)curr_desc),
 761                                        &adap_emac->RX0HDP);
 762                                 status &= ~EMAC_CPPI_EOQ_BIT;
 763                                 tail_desc->pkt_flag_len = status;
 764                         }
 765                         davinci_flush_desc(tail_desc);
 766                 }
 767                 return (ret);
 768         }
 769         return (0);
 770 }
 771
 772 /*
 773  * This function initializes the emac hardware. It does NOT initialize
 774  * EMAC modules power or pin multiplexors, that is done by board_init()
 775  * much earlier in bootup process. Returns 1 on success, 0 otherwise.
 776  */
 777 int davinci_emac_initialize(void)
 778 {
 779         u_int32_t       phy_id;
 780         u_int16_t       tmp;
 781         int             i;
 782         int             ret;
 783         struct eth_device *dev;
 784
 785         dev = malloc(sizeof *dev);
 786
 787         if (dev == NULL)
 788                 return -1;
 789
 790         memset(dev, 0, sizeof *dev);
 791         sprintf(dev->name, "DaVinci-EMAC");
 792
 793         dev->iobase = 0;
 794         dev->init = davinci_eth_open;
 795         dev->halt = davinci_eth_close;
 796         dev->send = davinci_eth_send_packet;
 797         dev->recv = davinci_eth_rcv_packet;
 798         dev->write_hwaddr = davinci_eth_set_mac_addr;
 799
 800         eth_register(dev);
 801
 802         davinci_eth_mdio_enable();
 803
 804         /* let the EMAC detect the PHYs */
 805         udelay(5000);
 806
 807         for (i = 0; i < 256; i++) {
 808                 if (readl(&adap_mdio->ALIVE))
 809                         break;
 810                 udelay(1000);
 811         }
 812
 813         if (i >= 256) {
 814                 printf("No ETH PHY detected!!!\n");
 815                 return(0);
 816         }
 817
 818         /* Find if PHY(s) is/are connected */
 819         ret = davinci_eth_phy_detect();
 820         if (!ret)
 821                 return(0);
 822         else
 823                 debug_emac(" %d ETH PHY detected\n", ret);
 824
 825         /* Get PHY ID and initialize phy_ops for a detected PHY */
 826         for (i = 0; i < num_phy; i++) {
 827                 if (!davinci_eth_phy_read(active_phy_addr[i], MII_PHYSID1,
 828                                                         &tmp)) {
 829                         active_phy_addr[i] = 0xff;
 830                         continue;
 831                 }
 832
 833                 phy_id = (tmp << 16) & 0xffff0000;
 834
 835                 if (!davinci_eth_phy_read(active_phy_addr[i], MII_PHYSID2,
 836                                                         &tmp)) {
 837                         active_phy_addr[i] = 0xff;
 838                         continue;
 839                 }
 840
 841                 phy_id |= tmp & 0x0000ffff;
 842
 843                 switch (phy_id) {
 844 #ifdef PHY_KSZ8873
 845                 case PHY_KSZ8873:
 846                         sprintf(phy[i].name, "KSZ8873 @ 0x%02x",
 847                                                 active_phy_addr[i]);
 848                         phy[i].init = ksz8873_init_phy;
 849                         phy[i].is_phy_connected = ksz8873_is_phy_connected;
 850                         phy[i].get_link_speed = ksz8873_get_link_speed;
 851                         phy[i].auto_negotiate = ksz8873_auto_negotiate;
 852                         break;
 853 #endif
 854 #ifdef PHY_LXT972
 855                 case PHY_LXT972:
 856                         sprintf(phy[i].name, "LXT972 @ 0x%02x",
 857                                                 active_phy_addr[i]);
 858                         phy[i].init = lxt972_init_phy;
 859                         phy[i].is_phy_connected = lxt972_is_phy_connected;
 860                         phy[i].get_link_speed = lxt972_get_link_speed;
 861                         phy[i].auto_negotiate = lxt972_auto_negotiate;
 862                         break;
 863 #endif
 864 #ifdef PHY_DP83848
 865                 case PHY_DP83848:
 866                         sprintf(phy[i].name, "DP83848 @ 0x%02x",
 867                                                 active_phy_addr[i]);
 868                         phy[i].init = dp83848_init_phy;
 869                         phy[i].is_phy_connected = dp83848_is_phy_connected;
 870                         phy[i].get_link_speed = dp83848_get_link_speed;
 871                         phy[i].auto_negotiate = dp83848_auto_negotiate;
 872                         break;
 873 #endif
 874 #ifdef PHY_ET1011C
 875                 case PHY_ET1011C:
 876                         sprintf(phy[i].name, "ET1011C @ 0x%02x",
 877                                                 active_phy_addr[i]);
 878                         phy[i].init = gen_init_phy;
 879                         phy[i].is_phy_connected = gen_is_phy_connected;
 880                         phy[i].get_link_speed = et1011c_get_link_speed;
 881                         phy[i].auto_negotiate = gen_auto_negotiate;
 882                         break;
 883 #endif
 884                 default:
 885                         sprintf(phy[i].name, "GENERIC @ 0x%02x",
 886                                                 active_phy_addr[i]);
 887                         phy[i].init = gen_init_phy;
 888                         phy[i].is_phy_connected = gen_is_phy_connected;
 889                         phy[i].get_link_speed = gen_get_link_speed;
 890                         phy[i].auto_negotiate = gen_auto_negotiate;
 891                 }
 892
 893                 debug("Ethernet PHY: %s\n", phy[i].name);
 894
 895                 miiphy_register(phy[i].name, davinci_mii_phy_read,
 896                                                 davinci_mii_phy_write);
 897         }
 898
 899 #if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
 900                 defined(CONFIG_MACH_DAVINCI_DA850_EVM)
 901         for (i = 0; i < num_phy; i++) {
 902                 if (phy[i].is_phy_connected(i))
 903                         phy[i].auto_negotiate(i);
 904         }
 905 #endif
 906         return(1);
 907 }