drivers/net/pch_gbe.c

   1 /*
   2  * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
   3  *
   4  * Intel Platform Controller Hub EG20T (codename Topcliff) GMAC Driver
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <errno.h>
  11 #include <asm/io.h>
  12 #include <pci.h>
  13 #include <malloc.h>
  14 #include <miiphy.h>
  15 #include "pch_gbe.h"
  16
  17 #if !defined(CONFIG_PHYLIB)
  18 # error "PCH Gigabit Ethernet driver requires PHYLIB - missing CONFIG_PHYLIB"
  19 #endif
  20
  21 static struct pci_device_id supported[] = {
  22         { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_GBE },
  23         { }
  24 };
  25
  26 static void pch_gbe_mac_read(struct pch_gbe_regs *mac_regs, u8 *addr)
  27 {
  28         u32 macid_hi, macid_lo;
  29
  30         macid_hi = readl(&mac_regs->mac_adr[0].high);
  31         macid_lo = readl(&mac_regs->mac_adr[0].low) & 0xffff;
  32         debug("pch_gbe: macid_hi %#x macid_lo %#x\n", macid_hi, macid_lo);
  33
  34         addr[0] = (u8)(macid_hi & 0xff);
  35         addr[1] = (u8)((macid_hi >> 8) & 0xff);
  36         addr[2] = (u8)((macid_hi >> 16) & 0xff);
  37         addr[3] = (u8)((macid_hi >> 24) & 0xff);
  38         addr[4] = (u8)(macid_lo & 0xff);
  39         addr[5] = (u8)((macid_lo >> 8) & 0xff);
  40 }
  41
  42 static int pch_gbe_mac_write(struct pch_gbe_regs *mac_regs, u8 *addr)
  43 {
  44         u32 macid_hi, macid_lo;
  45         ulong start;
  46
  47         macid_hi = addr[0] + (addr[1] << 8) + (addr[2] << 16) + (addr[3] << 24);
  48         macid_lo = addr[4] + (addr[5] << 8);
  49
  50         writel(macid_hi, &mac_regs->mac_adr[0].high);
  51         writel(macid_lo, &mac_regs->mac_adr[0].low);
  52         writel(0xfffe, &mac_regs->addr_mask);
  53
  54         start = get_timer(0);
  55         while (get_timer(start) < PCH_GBE_TIMEOUT) {
  56                 if (!(readl(&mac_regs->addr_mask) & PCH_GBE_BUSY))
  57                         return 0;
  58
  59                 udelay(10);
  60         }
  61
  62         return -ETIME;
  63 }
  64
  65 static int pch_gbe_reset(struct eth_device *dev)
  66 {
  67         struct pch_gbe_priv *priv = dev->priv;
  68         struct pch_gbe_regs *mac_regs = priv->mac_regs;
  69         ulong start;
  70
  71         priv->rx_idx = 0;
  72         priv->tx_idx = 0;
  73
  74         writel(PCH_GBE_ALL_RST, &mac_regs->reset);
  75
  76         /*
  77          * Configure the MAC to RGMII mode after reset
  78          *
  79          * For some unknown reason, we must do the configuration here right
  80          * after resetting the whole MAC, otherwise the reset bit in the RESET
  81          * register will never be cleared by the hardware. And there is another
  82          * way of having the same magic, that is to configure the MODE register
  83          * to have the MAC work in MII/GMII mode, which is how current Linux
  84          * pch_gbe driver does. Since anyway we need program the MAC to RGMII
  85          * mode in the driver, we just do it here.
  86          *
  87          * Note: this behavior is not documented in the hardware manual.
  88          */
  89         writel(PCH_GBE_RGMII_MODE_RGMII | PCH_GBE_CHIP_TYPE_INTERNAL,
  90                &mac_regs->rgmii_ctrl);
  91
  92         start = get_timer(0);
  93         while (get_timer(start) < PCH_GBE_TIMEOUT) {
  94                 if (!(readl(&mac_regs->reset) & PCH_GBE_ALL_RST)) {
  95                         /*
  96                          * Soft reset clears hardware MAC address registers,
  97                          * so we have to reload MAC address here in order to
  98                          * make linux pch_gbe driver happy.
  99                          */
 100                         return pch_gbe_mac_write(mac_regs, dev->enetaddr);
 101                 }
 102
 103                 udelay(10);
 104         }
 105
 106         debug("pch_gbe: reset timeout\n");
 107         return -ETIME;
 108 }
 109
 110 static void pch_gbe_rx_descs_init(struct eth_device *dev)
 111 {
 112         struct pch_gbe_priv *priv = dev->priv;
 113         struct pch_gbe_regs *mac_regs = priv->mac_regs;
 114         struct pch_gbe_rx_desc *rx_desc = &priv->rx_desc[0];
 115         int i;
 116
 117         memset(rx_desc, 0, sizeof(struct pch_gbe_rx_desc) * PCH_GBE_DESC_NUM);
 118         for (i = 0; i < PCH_GBE_DESC_NUM; i++)
 119                 rx_desc->buffer_addr = pci_phys_to_mem(priv->bdf,
 120                         (u32)(priv->rx_buff[i]));
 121
 122         writel(pci_phys_to_mem(priv->bdf, (u32)rx_desc),
 123                &mac_regs->rx_dsc_base);
 124         writel(sizeof(struct pch_gbe_rx_desc) * (PCH_GBE_DESC_NUM - 1),
 125                &mac_regs->rx_dsc_size);
 126
 127         writel(pci_phys_to_mem(priv->bdf, (u32)(rx_desc + 1)),
 128                &mac_regs->rx_dsc_sw_p);
 129 }
 130
 131 static void pch_gbe_tx_descs_init(struct eth_device *dev)
 132 {
 133         struct pch_gbe_priv *priv = dev->priv;
 134         struct pch_gbe_regs *mac_regs = priv->mac_regs;
 135         struct pch_gbe_tx_desc *tx_desc = &priv->tx_desc[0];
 136
 137         memset(tx_desc, 0, sizeof(struct pch_gbe_tx_desc) * PCH_GBE_DESC_NUM);
 138
 139         writel(pci_phys_to_mem(priv->bdf, (u32)tx_desc),
 140                &mac_regs->tx_dsc_base);
 141         writel(sizeof(struct pch_gbe_tx_desc) * (PCH_GBE_DESC_NUM - 1),
 142                &mac_regs->tx_dsc_size);
 143         writel(pci_phys_to_mem(priv->bdf, (u32)(tx_desc + 1)),
 144                &mac_regs->tx_dsc_sw_p);
 145 }
 146
 147 static void pch_gbe_adjust_link(struct pch_gbe_regs *mac_regs,
 148                                 struct phy_device *phydev)
 149 {
 150         if (!phydev->link) {
 151                 printf("%s: No link.\n", phydev->dev->name);
 152                 return;
 153         }
 154
 155         clrbits_le32(&mac_regs->rgmii_ctrl,
 156                      PCH_GBE_RGMII_RATE_2_5M | PCH_GBE_CRS_SEL);
 157         clrbits_le32(&mac_regs->mode,
 158                      PCH_GBE_MODE_GMII_ETHER | PCH_GBE_MODE_FULL_DUPLEX);
 159
 160         switch (phydev->speed) {
 161         case 1000:
 162                 setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_125M);
 163                 setbits_le32(&mac_regs->mode, PCH_GBE_MODE_GMII_ETHER);
 164                 break;
 165         case 100:
 166                 setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_25M);
 167                 setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER);
 168                 break;
 169         case 10:
 170                 setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_2_5M);
 171                 setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER);
 172                 break;
 173         }
 174
 175         if (phydev->duplex) {
 176                 setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_CRS_SEL);
 177                 setbits_le32(&mac_regs->mode, PCH_GBE_MODE_FULL_DUPLEX);
 178         }
 179
 180         printf("Speed: %d, %s duplex\n", phydev->speed,
 181                (phydev->duplex) ? "full" : "half");
 182
 183         return;
 184 }
 185
 186 static int pch_gbe_init(struct eth_device *dev, bd_t *bis)
 187 {
 188         struct pch_gbe_priv *priv = dev->priv;
 189         struct pch_gbe_regs *mac_regs = priv->mac_regs;
 190
 191         if (pch_gbe_reset(dev))
 192                 return -1;
 193
 194         pch_gbe_rx_descs_init(dev);
 195         pch_gbe_tx_descs_init(dev);
 196
 197         /* Enable frame bursting */
 198         writel(PCH_GBE_MODE_FR_BST, &mac_regs->mode);
 199         /* Disable TCP/IP accelerator */
 200         writel(PCH_GBE_RX_TCPIPACC_OFF, &mac_regs->tcpip_acc);
 201         /* Disable RX flow control */
 202         writel(0, &mac_regs->rx_fctrl);
 203         /* Configure RX/TX mode */
 204         writel(PCH_GBE_RH_ALM_EMP_16 | PCH_GBE_RH_ALM_FULL_16 |
 205                PCH_GBE_RH_RD_TRG_32, &mac_regs->rx_mode);
 206         writel(PCH_GBE_TM_TH_TX_STRT_32 | PCH_GBE_TM_TH_ALM_EMP_16 |
 207                PCH_GBE_TM_TH_ALM_FULL_32 | PCH_GBE_TM_ST_AND_FD |
 208                PCH_GBE_TM_SHORT_PKT, &mac_regs->tx_mode);
 209
 210         /* Start up the PHY */
 211         if (phy_startup(priv->phydev)) {
 212                 printf("Could not initialize PHY %s\n",
 213                        priv->phydev->dev->name);
 214                 return -1;
 215         }
 216
 217         pch_gbe_adjust_link(mac_regs, priv->phydev);
 218
 219         if (!priv->phydev->link)
 220                 return -1;
 221
 222         /* Enable TX & RX */
 223         writel(PCH_GBE_RX_DMA_EN | PCH_GBE_TX_DMA_EN, &mac_regs->dma_ctrl);
 224         writel(PCH_GBE_MRE_MAC_RX_EN, &mac_regs->mac_rx_en);
 225
 226         return 0;
 227 }
 228
 229 static void pch_gbe_halt(struct eth_device *dev)
 230 {
 231         struct pch_gbe_priv *priv = dev->priv;
 232
 233         pch_gbe_reset(dev);
 234
 235         phy_shutdown(priv->phydev);
 236 }
 237
 238 static int pch_gbe_send(struct eth_device *dev, void *packet, int length)
 239 {
 240         struct pch_gbe_priv *priv = dev->priv;
 241         struct pch_gbe_regs *mac_regs = priv->mac_regs;
 242         struct pch_gbe_tx_desc *tx_head, *tx_desc;
 243         u16 frame_ctrl = 0;
 244         u32 int_st;
 245         ulong start;
 246
 247         tx_head = &priv->tx_desc[0];
 248         tx_desc = &priv->tx_desc[priv->tx_idx];
 249
 250         if (length < 64)
 251                 frame_ctrl |= PCH_GBE_TXD_CTRL_APAD;
 252
 253         tx_desc->buffer_addr = pci_phys_to_mem(priv->bdf, (u32)packet);
 254         tx_desc->length = length;
 255         tx_desc->tx_words_eob = length + 3;
 256         tx_desc->tx_frame_ctrl = frame_ctrl;
 257         tx_desc->dma_status = 0;
 258         tx_desc->gbec_status = 0;
 259
 260         /* Test the wrap-around condition */
 261         if (++priv->tx_idx >= PCH_GBE_DESC_NUM)
 262                 priv->tx_idx = 0;
 263
 264         writel(pci_phys_to_mem(priv->bdf, (u32)(tx_head + priv->tx_idx)),
 265                &mac_regs->tx_dsc_sw_p);
 266
 267         start = get_timer(0);
 268         while (get_timer(start) < PCH_GBE_TIMEOUT) {
 269                 int_st = readl(&mac_regs->int_st);
 270                 if (int_st & PCH_GBE_INT_TX_CMPLT)
 271                         return 0;
 272
 273                 udelay(10);
 274         }
 275
 276         debug("pch_gbe: sent failed\n");
 277         return -ETIME;
 278 }
 279
 280 static int pch_gbe_recv(struct eth_device *dev)
 281 {
 282         struct pch_gbe_priv *priv = dev->priv;
 283         struct pch_gbe_regs *mac_regs = priv->mac_regs;
 284         struct pch_gbe_rx_desc *rx_head, *rx_desc;
 285         u32 hw_desc, buffer_addr, length;
 286         int rx_swp;
 287
 288         rx_head = &priv->rx_desc[0];
 289         rx_desc = &priv->rx_desc[priv->rx_idx];
 290
 291         readl(&mac_regs->int_st);
 292         hw_desc = readl(&mac_regs->rx_dsc_hw_p_hld);
 293
 294         /* Just return if not receiving any packet */
 295         if ((u32)rx_desc == hw_desc)
 296                 return 0;
 297
 298         buffer_addr = pci_mem_to_phys(priv->bdf, rx_desc->buffer_addr);
 299         length = rx_desc->rx_words_eob - 3 - ETH_FCS_LEN;
 300         NetReceive((uchar *)buffer_addr, length);
 301
 302         /* Test the wrap-around condition */
 303         if (++priv->rx_idx >= PCH_GBE_DESC_NUM)
 304                 priv->rx_idx = 0;
 305         rx_swp = priv->rx_idx;
 306         if (++rx_swp >= PCH_GBE_DESC_NUM)
 307                 rx_swp = 0;
 308
 309         writel(pci_phys_to_mem(priv->bdf, (u32)(rx_head + rx_swp)),
 310                &mac_regs->rx_dsc_sw_p);
 311
 312         return length;
 313 }
 314
 315 static int pch_gbe_mdio_ready(struct pch_gbe_regs *mac_regs)
 316 {
 317         ulong start = get_timer(0);
 318
 319         while (get_timer(start) < PCH_GBE_TIMEOUT) {
 320                 if (readl(&mac_regs->miim) & PCH_GBE_MIIM_OPER_READY)
 321                         return 0;
 322
 323                 udelay(10);
 324         }
 325
 326         return -ETIME;
 327 }
 328
 329 static int pch_gbe_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
 330 {
 331         struct pch_gbe_regs *mac_regs = bus->priv;
 332         u32 miim;
 333
 334         if (pch_gbe_mdio_ready(mac_regs))
 335                 return -ETIME;
 336
 337         miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) |
 338                (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) |
 339                PCH_GBE_MIIM_OPER_READ;
 340         writel(miim, &mac_regs->miim);
 341
 342         if (pch_gbe_mdio_ready(mac_regs))
 343                 return -ETIME;
 344
 345         return readl(&mac_regs->miim) & 0xffff;
 346 }
 347
 348 static int pch_gbe_mdio_write(struct mii_dev *bus, int addr, int devad,
 349                               int reg, u16 val)
 350 {
 351         struct pch_gbe_regs *mac_regs = bus->priv;
 352         u32 miim;
 353
 354         if (pch_gbe_mdio_ready(mac_regs))
 355                 return -ETIME;
 356
 357         miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) |
 358                (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) |
 359                PCH_GBE_MIIM_OPER_WRITE | val;
 360         writel(miim, &mac_regs->miim);
 361
 362         if (pch_gbe_mdio_ready(mac_regs))
 363                 return -ETIME;
 364         else
 365                 return 0;
 366 }
 367
 368 static int pch_gbe_mdio_init(char *name, struct pch_gbe_regs *mac_regs)
 369 {
 370         struct mii_dev *bus;
 371
 372         bus = mdio_alloc();
 373         if (!bus) {
 374                 debug("pch_gbe: failed to allocate MDIO bus\n");
 375                 return -ENOMEM;
 376         }
 377
 378         bus->read = pch_gbe_mdio_read;
 379         bus->write = pch_gbe_mdio_write;
 380         sprintf(bus->name, name);
 381
 382         bus->priv = (void *)mac_regs;
 383
 384         return mdio_register(bus);
 385 }
 386
 387 static int pch_gbe_phy_init(struct eth_device *dev)
 388 {
 389         struct pch_gbe_priv *priv = dev->priv;
 390         struct phy_device *phydev;
 391         int mask = 0xffffffff;
 392
 393         phydev = phy_find_by_mask(priv->bus, mask, priv->interface);
 394         if (!phydev) {
 395                 printf("pch_gbe: cannot find the phy\n");
 396                 return -1;
 397         }
 398
 399         phy_connect_dev(phydev, dev);
 400
 401         phydev->supported &= PHY_GBIT_FEATURES;
 402         phydev->advertising = phydev->supported;
 403
 404         priv->phydev = phydev;
 405         phy_config(phydev);
 406
 407         return 1;
 408 }
 409
 410 int pch_gbe_register(bd_t *bis)
 411 {
 412         struct eth_device *dev;
 413         struct pch_gbe_priv *priv;
 414         pci_dev_t devno;
 415         u32 iobase;
 416
 417         devno = pci_find_devices(supported, 0);
 418         if (devno == -1)
 419                 return -ENODEV;
 420
 421         dev = (struct eth_device *)malloc(sizeof(*dev));
 422         if (!dev)
 423                 return -ENOMEM;
 424         memset(dev, 0, sizeof(*dev));
 425
 426         /*
 427          * The priv structure contains the descriptors and frame buffers which
 428          * need a strict buswidth alignment (64 bytes)
 429          */
 430         priv = (struct pch_gbe_priv *)memalign(PCH_GBE_ALIGN_SIZE,
 431                                                sizeof(*priv));
 432         if (!priv) {
 433                 free(dev);
 434                 return -ENOMEM;
 435         }
 436         memset(priv, 0, sizeof(*priv));
 437
 438         dev->priv = priv;
 439         priv->dev = dev;
 440         priv->bdf = devno;
 441
 442         pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
 443         iobase &= PCI_BASE_ADDRESS_MEM_MASK;
 444         iobase = pci_mem_to_phys(devno, iobase);
 445
 446         dev->iobase = iobase;
 447         priv->mac_regs = (struct pch_gbe_regs *)iobase;
 448
 449         sprintf(dev->name, "pch_gbe.%x", iobase);
 450
 451         /* Read MAC address from SROM and initialize dev->enetaddr with it */
 452         pch_gbe_mac_read(priv->mac_regs, dev->enetaddr);
 453
 454         dev->init = pch_gbe_init;
 455         dev->halt = pch_gbe_halt;
 456         dev->send = pch_gbe_send;
 457         dev->recv = pch_gbe_recv;
 458
 459         eth_register(dev);
 460
 461         priv->interface = PHY_INTERFACE_MODE_RGMII;
 462         pch_gbe_mdio_init(dev->name, priv->mac_regs);
 463         priv->bus = miiphy_get_dev_by_name(dev->name);
 464
 465         return pch_gbe_phy_init(dev);
 466 }