]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/ns87308.c
cf4d3595e5da587ff2b8b27ffceabfb1b16530ab
[karo-tx-uboot.git] / drivers / ns87308.c
1 /*
2  * (C) Copyright 2000
3  * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
4  *
5  * See file CREDITS for list of people who contributed to this
6  * project.
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  */
23
24 #include <config.h>
25
26 #ifdef CFG_NS87308
27
28 #include <ns87308.h>
29
30 void initialise_ns87308 (void)
31 {
32 #ifdef CFG_NS87308_PS2MOD
33         unsigned char data;
34
35         /*
36          * Switch floppy drive to PS/2 mode.
37          */
38         read_pnp_config(SUPOERIO_CONF1, &data);
39         data &= 0xFB;
40         write_pnp_config(SUPOERIO_CONF1, data);
41 #endif
42
43 #if (CFG_NS87308_DEVS & CFG_NS87308_KBC1)
44         PNP_SET_DEVICE_BASE(LDEV_KBC1, CFG_NS87308_KBC1_BASE);
45         write_pnp_config(LUN_CONFIG_REG, 0);
46         write_pnp_config(CBASE_HIGH, 0x00);
47         write_pnp_config(CBASE_LOW, 0x64);
48 #endif
49
50 #if (CFG_NS87308_DEVS & CFG_NS87308_MOUSE)
51         PNP_ACTIVATE_DEVICE(LDEV_MOUSE);
52 #endif
53
54 #if (CFG_NS87308_DEVS & CFG_NS87308_RTC_APC)
55         PNP_SET_DEVICE_BASE(LDEV_RTC_APC, CFG_NS87308_RTC_BASE);
56 #endif
57
58 #if (CFG_NS87308_DEVS & CFG_NS87308_FDC)
59         PNP_SET_DEVICE_BASE(LDEV_FDC, CFG_NS87308_FDC_BASE);
60         write_pnp_config(LUN_CONFIG_REG, 0x40);
61 #endif
62
63 #if (CFG_NS87308_DEVS & CFG_NS87308_RARP)
64         PNP_SET_DEVICE_BASE(LDEV_PARP, CFG_NS87308_LPT_BASE);
65 #endif
66
67 #if (CFG_NS87308_DEVS & CFG_NS87308_UART1)
68         PNP_SET_DEVICE_BASE(LDEV_UART1, CFG_NS87308_UART1_BASE);
69 #endif
70
71 #if (CFG_NS87308_DEVS & CFG_NS87308_UART2)
72         PNP_SET_DEVICE_BASE(LDEV_UART2, CFG_NS87308_UART2_BASE);
73 #endif
74
75 #if (CFG_NS87308_DEVS & CFG_NS87308_GPIO)
76         PNP_SET_DEVICE_BASE(LDEV_GPIO, CFG_NS87308_GPIO_BASE);
77 #endif
78
79 #if (CFG_NS87308_DEVS & CFG_NS87308_POWRMAN)
80 #ifndef CFG_NS87308_PWMAN_BASE
81         PNP_ACTIVATE_DEVICE(LDEV_POWRMAN);
82 #else
83         PNP_SET_DEVICE_BASE(LDEV_POWRMAN, CFG_NS87308_PWMAN_BASE);
84
85         /*
86          * Enable all units
87          */
88         write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_FER1, 0x7d);
89         write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_FER2, 0x87);
90
91 #ifdef CFG_NS87308_PMC1
92         write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC1, CFG_NS87308_PMC1);
93 #endif
94
95 #ifdef CFG_NS87308_PMC2
96         write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC2, CFG_NS87308_PMC2);
97 #endif
98
99 #ifdef CFG_NS87308_PMC3
100         write_pm_reg(CFG_NS87308_PWMAN_BASE, PWM_PMC3, CFG_NS87308_PMC3);
101 #endif
102 #endif
103 #endif
104
105 #ifdef CFG_NS87308_CS0_BASE
106         PNP_PGCS_CSLINE_BASE(0, CFG_NS87308_CS0_BASE);
107         PNP_PGCS_CSLINE_CONF(0, CFG_NS87308_CS0_CONF);
108 #endif
109
110 #ifdef CFG_NS87308_CS1_BASE
111         PNP_PGCS_CSLINE_BASE(1, CFG_NS87308_CS1_BASE);
112         PNP_PGCS_CSLINE_CONF(1, CFG_NS87308_CS1_CONF);
113 #endif
114
115 #ifdef CFG_NS87308_CS2_BASE
116         PNP_PGCS_CSLINE_BASE(2, CFG_NS87308_CS2_BASE);
117         PNP_PGCS_CSLINE_CONF(2, CFG_NS87308_CS2_CONF);
118 #endif
119 }
120
121 #endif