]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/serial/serial_uniphier.c
Merge branch 'master' of git://git.denx.de/u-boot-arm
[karo-tx-uboot.git] / drivers / serial / serial_uniphier.c
1 /*
2  * Copyright (C) 2012-2014 Panasonic Corporation
3  *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <asm/io.h>
10 #include <asm/errno.h>
11 #include <dm/device.h>
12 #include <dm/platform_data/serial-uniphier.h>
13 #include <serial.h>
14
15 #define UART_REG(x)                                     \
16         u8 x;                                           \
17         u8 postpad_##x[3];
18
19 /*
20  * Note: Register map is slightly different from that of 16550.
21  */
22 struct uniphier_serial {
23         UART_REG(rbr);          /* 0x00 */
24         UART_REG(ier);          /* 0x04 */
25         UART_REG(iir);          /* 0x08 */
26         UART_REG(fcr);          /* 0x0c */
27         u8 mcr;                 /* 0x10 */
28         u8 lcr;
29         u16 __postpad;
30         UART_REG(lsr);          /* 0x14 */
31         UART_REG(msr);          /* 0x18 */
32         u32 __none1;
33         u32 __none2;
34         u16 dlr;
35         u16 __postpad2;
36 };
37
38 #define thr rbr
39
40 /*
41  * These are the definitions for the Line Control Register
42  */
43 #define UART_LCR_WLS_8  0x03            /* 8 bit character length */
44
45 /*
46  * These are the definitions for the Line Status Register
47  */
48 #define UART_LSR_DR     0x01            /* Data ready */
49 #define UART_LSR_THRE   0x20            /* Xmit holding register empty */
50
51 struct uniphier_serial_private_data {
52         struct uniphier_serial __iomem *membase;
53 };
54
55 #define uniphier_serial_port(dev)       \
56         ((struct uniphier_serial_private_data *)dev_get_priv(dev))->membase
57
58 static int uniphier_serial_setbrg(struct udevice *dev, int baudrate)
59 {
60         struct uniphier_serial_platform_data *plat = dev_get_platdata(dev);
61         struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
62         const unsigned int mode_x_div = 16;
63         unsigned int divisor;
64
65         writeb(UART_LCR_WLS_8, &port->lcr);
66
67         divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate);
68
69         writew(divisor, &port->dlr);
70
71         return 0;
72 }
73
74 static int uniphier_serial_getc(struct udevice *dev)
75 {
76         struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
77
78         if (!(readb(&port->lsr) & UART_LSR_DR))
79                 return -EAGAIN;
80
81         return readb(&port->rbr);
82 }
83
84 static int uniphier_serial_putc(struct udevice *dev, const char c)
85 {
86         struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
87
88         if (!(readb(&port->lsr) & UART_LSR_THRE))
89                 return -EAGAIN;
90
91         writeb(c, &port->thr);
92
93         return 0;
94 }
95
96 static int uniphier_serial_pending(struct udevice *dev, bool input)
97 {
98         struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
99
100         if (input)
101                 return readb(&port->lsr) & UART_LSR_DR;
102         else
103                 return !(readb(&port->lsr) & UART_LSR_THRE);
104 }
105
106 static int uniphier_serial_probe(struct udevice *dev)
107 {
108         struct uniphier_serial_private_data *priv = dev_get_priv(dev);
109         struct uniphier_serial_platform_data *plat = dev_get_platdata(dev);
110
111         priv->membase = map_sysmem(plat->base, sizeof(struct uniphier_serial));
112
113         if (!priv->membase)
114                 return -ENOMEM;
115
116         return 0;
117 }
118
119 static int uniphier_serial_remove(struct udevice *dev)
120 {
121         unmap_sysmem(uniphier_serial_port(dev));
122
123         return 0;
124 }
125
126 #ifdef CONFIG_OF_CONTROL
127 static const struct udevice_id uniphier_uart_of_match = {
128         { .compatible = "panasonic,uniphier-uart"},
129         {},
130 };
131
132 static int uniphier_serial_ofdata_to_platdata(struct udevice *dev)
133 {
134         /*
135          * TODO: Masahiro Yamada (yamada.m@jp.panasonic.com)
136          *
137          * Implement conversion code from DTB to platform data
138          * when supporting CONFIG_OF_CONTROL on UniPhir platform.
139          */
140 }
141 #endif
142
143 static const struct dm_serial_ops uniphier_serial_ops = {
144         .setbrg = uniphier_serial_setbrg,
145         .getc = uniphier_serial_getc,
146         .putc = uniphier_serial_putc,
147         .pending = uniphier_serial_pending,
148 };
149
150 U_BOOT_DRIVER(uniphier_serial) = {
151         .name = DRIVER_NAME,
152         .id = UCLASS_SERIAL,
153         .of_match = of_match_ptr(uniphier_uart_of_match),
154         .ofdata_to_platdata = of_match_ptr(uniphier_serial_ofdata_to_platdata),
155         .probe = uniphier_serial_probe,
156         .remove = uniphier_serial_remove,
157         .priv_auto_alloc_size = sizeof(struct uniphier_serial_private_data),
158         .platdata_auto_alloc_size =
159                                 sizeof(struct uniphier_serial_platform_data),
160         .ops = &uniphier_serial_ops,
161         .flags = DM_FLAG_PRE_RELOC,
162 };