drivers/video/exynos_dp.c

   1 /*
   2  * Copyright (C) 2012 Samsung Electronics
   3  *
   4  * Author: Donghwa Lee <dh09.lee@samsung.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <config.h>
  10 #include <common.h>
  11 #include <malloc.h>
  12 #include <linux/compat.h>
  13 #include <linux/err.h>
  14 #include <asm/arch/clk.h>
  15 #include <asm/arch/cpu.h>
  16 #include <asm/arch/dp_info.h>
  17 #include <asm/arch/dp.h>
  18 #include <fdtdec.h>
  19 #include <libfdt.h>
  20
  21 #include "exynos_dp_lowlevel.h"
  22
  23 DECLARE_GLOBAL_DATA_PTR;
  24
  25 void __exynos_set_dp_phy(unsigned int onoff)
  26 {
  27 }
  28 void exynos_set_dp_phy(unsigned int onoff)
  29         __attribute__((weak, alias("__exynos_set_dp_phy")));
  30
  31 static void exynos_dp_disp_info(struct edp_disp_info *disp_info)
  32 {
  33         disp_info->h_total = disp_info->h_res + disp_info->h_sync_width +
  34                 disp_info->h_back_porch + disp_info->h_front_porch;
  35         disp_info->v_total = disp_info->v_res + disp_info->v_sync_width +
  36                 disp_info->v_back_porch + disp_info->v_front_porch;
  37
  38         return;
  39 }
  40
  41 static int exynos_dp_init_dp(void)
  42 {
  43         int ret;
  44         exynos_dp_reset();
  45
  46         /* SW defined function Normal operation */
  47         exynos_dp_enable_sw_func(DP_ENABLE);
  48
  49         ret = exynos_dp_init_analog_func();
  50         if (ret != EXYNOS_DP_SUCCESS)
  51                 return ret;
  52
  53         exynos_dp_init_hpd();
  54         exynos_dp_init_aux();
  55
  56         return ret;
  57 }
  58
  59 static unsigned char exynos_dp_calc_edid_check_sum(unsigned char *edid_data)
  60 {
  61         int i;
  62         unsigned char sum = 0;
  63
  64         for (i = 0; i < EDID_BLOCK_LENGTH; i++)
  65                 sum = sum + edid_data[i];
  66
  67         return sum;
  68 }
  69
  70 static unsigned int exynos_dp_read_edid(void)
  71 {
  72         unsigned char edid[EDID_BLOCK_LENGTH * 2];
  73         unsigned int extend_block = 0;
  74         unsigned char sum;
  75         unsigned char test_vector;
  76         int retval;
  77
  78         /*
  79          * EDID device address is 0x50.
  80          * However, if necessary, you must have set upper address
  81          * into E-EDID in I2C device, 0x30.
  82          */
  83
  84         /* Read Extension Flag, Number of 128-byte EDID extension blocks */
  85         exynos_dp_read_byte_from_i2c(I2C_EDID_DEVICE_ADDR, EDID_EXTENSION_FLAG,
  86                         &extend_block);
  87
  88         if (extend_block > 0) {
  89                 printf("DP EDID data includes a single extension!\n");
  90
  91                 /* Read EDID data */
  92                 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
  93                                                 EDID_HEADER_PATTERN,
  94                                                 EDID_BLOCK_LENGTH,
  95                                                 &edid[EDID_HEADER_PATTERN]);
  96                 if (retval != 0) {
  97                         printf("DP EDID Read failed!\n");
  98                         return -1;
  99                 }
 100                 sum = exynos_dp_calc_edid_check_sum(edid);
 101                 if (sum != 0) {
 102                         printf("DP EDID bad checksum!\n");
 103                         return -1;
 104                 }
 105
 106                 /* Read additional EDID data */
 107                 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
 108                                 EDID_BLOCK_LENGTH,
 109                                 EDID_BLOCK_LENGTH,
 110                                 &edid[EDID_BLOCK_LENGTH]);
 111                 if (retval != 0) {
 112                         printf("DP EDID Read failed!\n");
 113                         return -1;
 114                 }
 115                 sum = exynos_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]);
 116                 if (sum != 0) {
 117                         printf("DP EDID bad checksum!\n");
 118                         return -1;
 119                 }
 120
 121                 exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST,
 122                                         &test_vector);
 123                 if (test_vector & DPCD_TEST_EDID_READ) {
 124                         exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM,
 125                                 edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]);
 126                         exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE,
 127                                 DPCD_TEST_EDID_CHECKSUM_WRITE);
 128                 }
 129         } else {
 130                 debug("DP EDID data does not include any extensions.\n");
 131
 132                 /* Read EDID data */
 133                 retval = exynos_dp_read_bytes_from_i2c(I2C_EDID_DEVICE_ADDR,
 134                                 EDID_HEADER_PATTERN,
 135                                 EDID_BLOCK_LENGTH,
 136                                 &edid[EDID_HEADER_PATTERN]);
 137
 138                 if (retval != 0) {
 139                         printf("DP EDID Read failed!\n");
 140                         return -1;
 141                 }
 142                 sum = exynos_dp_calc_edid_check_sum(edid);
 143                 if (sum != 0) {
 144                         printf("DP EDID bad checksum!\n");
 145                         return -1;
 146                 }
 147
 148                 exynos_dp_read_byte_from_dpcd(DPCD_TEST_REQUEST,
 149                         &test_vector);
 150                 if (test_vector & DPCD_TEST_EDID_READ) {
 151                         exynos_dp_write_byte_to_dpcd(DPCD_TEST_EDID_CHECKSUM,
 152                                 edid[EDID_CHECKSUM]);
 153                         exynos_dp_write_byte_to_dpcd(DPCD_TEST_RESPONSE,
 154                                 DPCD_TEST_EDID_CHECKSUM_WRITE);
 155                 }
 156         }
 157
 158         debug("DP EDID Read success!\n");
 159
 160         return 0;
 161 }
 162
 163 static unsigned int exynos_dp_handle_edid(struct edp_device_info *edp_info)
 164 {
 165         unsigned char buf[12];
 166         unsigned int ret;
 167         unsigned char temp;
 168         unsigned char retry_cnt;
 169         unsigned char dpcd_rev[16];
 170         unsigned char lane_bw[16];
 171         unsigned char lane_cnt[16];
 172
 173         memset(dpcd_rev, 0, 16);
 174         memset(lane_bw, 0, 16);
 175         memset(lane_cnt, 0, 16);
 176         memset(buf, 0, 12);
 177
 178         retry_cnt = 5;
 179         while (retry_cnt) {
 180                 /* Read DPCD 0x0000-0x000b */
 181                 ret = exynos_dp_read_bytes_from_dpcd(DPCD_DPCD_REV, 12,
 182                                 buf);
 183                 if (ret != EXYNOS_DP_SUCCESS) {
 184                         if (retry_cnt == 0) {
 185                                 printf("DP read_byte_from_dpcd() failed\n");
 186                                 return ret;
 187                         }
 188                         retry_cnt--;
 189                 } else
 190                         break;
 191         }
 192
 193         /* */
 194         temp = buf[DPCD_DPCD_REV];
 195         if (temp == DP_DPCD_REV_10 || temp == DP_DPCD_REV_11)
 196                 edp_info->dpcd_rev = temp;
 197         else {
 198                 printf("DP Wrong DPCD Rev : %x\n", temp);
 199                 return -ENODEV;
 200         }
 201
 202         temp = buf[DPCD_MAX_LINK_RATE];
 203         if (temp == DP_LANE_BW_1_62 || temp == DP_LANE_BW_2_70)
 204                 edp_info->lane_bw = temp;
 205         else {
 206                 printf("DP Wrong MAX LINK RATE : %x\n", temp);
 207                 return -EINVAL;
 208         }
 209
 210         /*Refer VESA Display Port Stnadard Ver1.1a Page 120 */
 211         if (edp_info->dpcd_rev == DP_DPCD_REV_11) {
 212                 temp = buf[DPCD_MAX_LANE_COUNT] & 0x1f;
 213                 if (buf[DPCD_MAX_LANE_COUNT] & 0x80)
 214                         edp_info->dpcd_efc = 1;
 215                 else
 216                         edp_info->dpcd_efc = 0;
 217         } else {
 218                 temp = buf[DPCD_MAX_LANE_COUNT];
 219                 edp_info->dpcd_efc = 0;
 220         }
 221
 222         if (temp == DP_LANE_CNT_1 || temp == DP_LANE_CNT_2 ||
 223                         temp == DP_LANE_CNT_4) {
 224                 edp_info->lane_cnt = temp;
 225         } else {
 226                 printf("DP Wrong MAX LANE COUNT : %x\n", temp);
 227                 return -EINVAL;
 228         }
 229
 230         ret = exynos_dp_read_edid();
 231         if (ret != EXYNOS_DP_SUCCESS) {
 232                 printf("DP exynos_dp_read_edid() failed\n");
 233                 return -EINVAL;
 234         }
 235
 236         return ret;
 237 }
 238
 239 static void exynos_dp_init_training(void)
 240 {
 241         /*
 242          * MACRO_RST must be applied after the PLL_LOCK to avoid
 243          * the DP inter pair skew issue for at least 10 us
 244          */
 245         exynos_dp_reset_macro();
 246
 247         /* All DP analog module power up */
 248         exynos_dp_set_analog_power_down(POWER_ALL, 0);
 249 }
 250
 251 static unsigned int exynos_dp_link_start(struct edp_device_info *edp_info)
 252 {
 253         unsigned char buf[5];
 254         unsigned int ret = 0;
 255
 256         debug("DP: %s was called\n", __func__);
 257
 258         edp_info->lt_info.lt_status = DP_LT_CR;
 259         edp_info->lt_info.ep_loop = 0;
 260         edp_info->lt_info.cr_loop[0] = 0;
 261         edp_info->lt_info.cr_loop[1] = 0;
 262         edp_info->lt_info.cr_loop[2] = 0;
 263         edp_info->lt_info.cr_loop[3] = 0;
 264
 265                 /* Set sink to D0 (Sink Not Ready) mode. */
 266                 ret = exynos_dp_write_byte_to_dpcd(DPCD_SINK_POWER_STATE,
 267                                 DPCD_SET_POWER_STATE_D0);
 268         if (ret != EXYNOS_DP_SUCCESS) {
 269                 printf("DP write_dpcd_byte failed\n");
 270                 return ret;
 271         }
 272
 273         /* Set link rate and count as you want to establish*/
 274         exynos_dp_set_link_bandwidth(edp_info->lane_bw);
 275         exynos_dp_set_lane_count(edp_info->lane_cnt);
 276
 277         /* Setup RX configuration */
 278         buf[0] = edp_info->lane_bw;
 279         buf[1] = edp_info->lane_cnt;
 280
 281         ret = exynos_dp_write_bytes_to_dpcd(DPCD_LINK_BW_SET, 2,
 282                         buf);
 283         if (ret != EXYNOS_DP_SUCCESS) {
 284                 printf("DP write_dpcd_byte failed\n");
 285                 return ret;
 286         }
 287
 288         exynos_dp_set_lane_pre_emphasis(PRE_EMPHASIS_LEVEL_0,
 289                         edp_info->lane_cnt);
 290
 291         /* Set training pattern 1 */
 292         exynos_dp_set_training_pattern(TRAINING_PTN1);
 293
 294         /* Set RX training pattern */
 295         buf[0] = DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_1;
 296
 297         buf[1] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
 298                 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
 299         buf[2] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
 300                 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
 301         buf[3] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
 302                 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
 303         buf[4] = DPCD_PRE_EMPHASIS_SET_PATTERN_2_LEVEL_0 |
 304                 DPCD_VOLTAGE_SWING_SET_PATTERN_1_LEVEL_0;
 305
 306         ret = exynos_dp_write_bytes_to_dpcd(DPCD_TRAINING_PATTERN_SET,
 307                         5, buf);
 308         if (ret != EXYNOS_DP_SUCCESS) {
 309                 printf("DP write_dpcd_byte failed\n");
 310                 return ret;
 311         }
 312
 313         return ret;
 314 }
 315
 316 static unsigned int exynos_dp_training_pattern_dis(void)
 317 {
 318         unsigned int ret = EXYNOS_DP_SUCCESS;
 319
 320         exynos_dp_set_training_pattern(DP_NONE);
 321
 322         ret = exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
 323                         DPCD_TRAINING_PATTERN_DISABLED);
 324         if (ret != EXYNOS_DP_SUCCESS) {
 325                 printf("DP requst_link_traninig_req failed\n");
 326                 return -EAGAIN;
 327         }
 328
 329         return ret;
 330 }
 331
 332 static unsigned int exynos_dp_enable_rx_to_enhanced_mode(unsigned char enable)
 333 {
 334         unsigned char data;
 335         unsigned int ret = EXYNOS_DP_SUCCESS;
 336
 337         ret = exynos_dp_read_byte_from_dpcd(DPCD_LANE_COUNT_SET,
 338                         &data);
 339         if (ret != EXYNOS_DP_SUCCESS) {
 340                 printf("DP read_from_dpcd failed\n");
 341                 return -EAGAIN;
 342         }
 343
 344         if (enable)
 345                 data = DPCD_ENHANCED_FRAME_EN | DPCD_LN_COUNT_SET(data);
 346         else
 347                 data = DPCD_LN_COUNT_SET(data);
 348
 349         ret = exynos_dp_write_byte_to_dpcd(DPCD_LANE_COUNT_SET,
 350                         data);
 351         if (ret != EXYNOS_DP_SUCCESS) {
 352                         printf("DP write_to_dpcd failed\n");
 353                         return -EAGAIN;
 354
 355         }
 356
 357         return ret;
 358 }
 359
 360 static unsigned int exynos_dp_set_enhanced_mode(unsigned char enhance_mode)
 361 {
 362         unsigned int ret = EXYNOS_DP_SUCCESS;
 363
 364         ret = exynos_dp_enable_rx_to_enhanced_mode(enhance_mode);
 365         if (ret != EXYNOS_DP_SUCCESS) {
 366                 printf("DP rx_enhance_mode failed\n");
 367                 return -EAGAIN;
 368         }
 369
 370         exynos_dp_enable_enhanced_mode(enhance_mode);
 371
 372         return ret;
 373 }
 374
 375 static int exynos_dp_read_dpcd_lane_stat(struct edp_device_info *edp_info,
 376                 unsigned char *status)
 377 {
 378         unsigned int ret, i;
 379         unsigned char buf[2];
 380         unsigned char lane_stat[DP_LANE_CNT_4] = {0,};
 381         unsigned char shift_val[DP_LANE_CNT_4] = {0,};
 382
 383         shift_val[0] = 0;
 384         shift_val[1] = 4;
 385         shift_val[2] = 0;
 386         shift_val[3] = 4;
 387
 388         ret = exynos_dp_read_bytes_from_dpcd(DPCD_LANE0_1_STATUS, 2, buf);
 389         if (ret != EXYNOS_DP_SUCCESS) {
 390                 printf("DP read lane status failed\n");
 391                 return ret;
 392         }
 393
 394         for (i = 0; i < edp_info->lane_cnt; i++) {
 395                 lane_stat[i] = (buf[(i / 2)] >> shift_val[i]) & 0x0f;
 396                 if (lane_stat[0] != lane_stat[i]) {
 397                         printf("Wrong lane status\n");
 398                         return -EINVAL;
 399                 }
 400         }
 401
 402         *status = lane_stat[0];
 403
 404         return ret;
 405 }
 406
 407 static unsigned int exynos_dp_read_dpcd_adj_req(unsigned char lane_num,
 408                 unsigned char *sw, unsigned char *em)
 409 {
 410         unsigned int ret = EXYNOS_DP_SUCCESS;
 411         unsigned char buf;
 412         unsigned int dpcd_addr;
 413         unsigned char shift_val[DP_LANE_CNT_4] = {0, 4, 0, 4};
 414
 415         /*lane_num value is used as arry index, so this range 0 ~ 3 */
 416         dpcd_addr = DPCD_ADJUST_REQUEST_LANE0_1 + (lane_num / 2);
 417
 418         ret = exynos_dp_read_byte_from_dpcd(dpcd_addr, &buf);
 419         if (ret != EXYNOS_DP_SUCCESS) {
 420                 printf("DP read adjust request failed\n");
 421                 return -EAGAIN;
 422         }
 423
 424         *sw = ((buf >> shift_val[lane_num]) & 0x03);
 425         *em = ((buf >> shift_val[lane_num]) & 0x0c) >> 2;
 426
 427         return ret;
 428 }
 429
 430 static int exynos_dp_equalizer_err_link(struct edp_device_info *edp_info)
 431 {
 432         int ret;
 433
 434         ret = exynos_dp_training_pattern_dis();
 435         if (ret != EXYNOS_DP_SUCCESS) {
 436                 printf("DP training_patter_disable() failed\n");
 437                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 438         }
 439
 440         ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc);
 441         if (ret != EXYNOS_DP_SUCCESS) {
 442                 printf("DP set_enhanced_mode() failed\n");
 443                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 444         }
 445
 446         return ret;
 447 }
 448
 449 static int exynos_dp_reduce_link_rate(struct edp_device_info *edp_info)
 450 {
 451         int ret;
 452
 453         if (edp_info->lane_bw == DP_LANE_BW_2_70) {
 454                 edp_info->lane_bw = DP_LANE_BW_1_62;
 455                 printf("DP Change lane bw to 1.62Gbps\n");
 456                 edp_info->lt_info.lt_status = DP_LT_START;
 457                 ret = EXYNOS_DP_SUCCESS;
 458         } else {
 459                 ret = exynos_dp_training_pattern_dis();
 460                 if (ret != EXYNOS_DP_SUCCESS)
 461                         printf("DP training_patter_disable() failed\n");
 462
 463                 ret = exynos_dp_set_enhanced_mode(edp_info->dpcd_efc);
 464                 if (ret != EXYNOS_DP_SUCCESS)
 465                         printf("DP set_enhanced_mode() failed\n");
 466
 467                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 468         }
 469
 470         return ret;
 471 }
 472
 473 static unsigned int exynos_dp_process_clock_recovery(struct edp_device_info
 474                                                         *edp_info)
 475 {
 476         unsigned int ret = EXYNOS_DP_SUCCESS;
 477         unsigned char lane_stat;
 478         unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0, };
 479         unsigned int i;
 480         unsigned char adj_req_sw;
 481         unsigned char adj_req_em;
 482         unsigned char buf[5];
 483
 484         debug("DP: %s was called\n", __func__);
 485         mdelay(1);
 486
 487         ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
 488         if (ret != EXYNOS_DP_SUCCESS) {
 489                         printf("DP read lane status failed\n");
 490                         edp_info->lt_info.lt_status = DP_LT_FAIL;
 491                         return ret;
 492         }
 493
 494         if (lane_stat & DP_LANE_STAT_CR_DONE) {
 495                 debug("DP clock Recovery training succeed\n");
 496                 exynos_dp_set_training_pattern(TRAINING_PTN2);
 497
 498                 for (i = 0; i < edp_info->lane_cnt; i++) {
 499                         ret = exynos_dp_read_dpcd_adj_req(i, &adj_req_sw,
 500                                         &adj_req_em);
 501                         if (ret != EXYNOS_DP_SUCCESS) {
 502                                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 503                                 return ret;
 504                         }
 505
 506                         lt_ctl_val[i] = 0;
 507                         lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
 508
 509                         if ((adj_req_sw == VOLTAGE_LEVEL_3)
 510                                 || (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
 511                                 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
 512                                         MAX_PRE_EMPHASIS_REACH_3;
 513                         }
 514                         exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i);
 515                 }
 516
 517                 buf[0] =  DPCD_SCRAMBLING_DISABLED | DPCD_TRAINING_PATTERN_2;
 518                 buf[1] = lt_ctl_val[0];
 519                 buf[2] = lt_ctl_val[1];
 520                 buf[3] = lt_ctl_val[2];
 521                 buf[4] = lt_ctl_val[3];
 522
 523                 ret = exynos_dp_write_bytes_to_dpcd(
 524                                 DPCD_TRAINING_PATTERN_SET, 5, buf);
 525                 if (ret != EXYNOS_DP_SUCCESS) {
 526                         printf("DP write traning pattern1 failed\n");
 527                         edp_info->lt_info.lt_status = DP_LT_FAIL;
 528                         return ret;
 529                 } else
 530                         edp_info->lt_info.lt_status = DP_LT_ET;
 531         } else {
 532                 for (i = 0; i < edp_info->lane_cnt; i++) {
 533                         lt_ctl_val[i] = exynos_dp_get_lanex_pre_emphasis(i);
 534                                 ret = exynos_dp_read_dpcd_adj_req(i,
 535                                                 &adj_req_sw, &adj_req_em);
 536                         if (ret != EXYNOS_DP_SUCCESS) {
 537                                 printf("DP read adj req failed\n");
 538                                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 539                                 return ret;
 540                         }
 541
 542                         if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
 543                                         (adj_req_em == PRE_EMPHASIS_LEVEL_3))
 544                                 ret = exynos_dp_reduce_link_rate(edp_info);
 545
 546                         if ((DRIVE_CURRENT_SET_0_GET(lt_ctl_val[i]) ==
 547                                                 adj_req_sw) &&
 548                                 (PRE_EMPHASIS_SET_0_GET(lt_ctl_val[i]) ==
 549                                                 adj_req_em)) {
 550                                 edp_info->lt_info.cr_loop[i]++;
 551                                 if (edp_info->lt_info.cr_loop[i] == MAX_CR_LOOP)
 552                                         ret = exynos_dp_reduce_link_rate(
 553                                                         edp_info);
 554                         }
 555
 556                         lt_ctl_val[i] = 0;
 557                         lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
 558
 559                         if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
 560                                         (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
 561                                 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3 |
 562                                         MAX_PRE_EMPHASIS_REACH_3;
 563                         }
 564                         exynos_dp_set_lanex_pre_emphasis(lt_ctl_val[i], i);
 565                 }
 566
 567                 ret = exynos_dp_write_bytes_to_dpcd(
 568                                 DPCD_TRAINING_LANE0_SET, 4, lt_ctl_val);
 569                 if (ret != EXYNOS_DP_SUCCESS) {
 570                         printf("DP write traning pattern2 failed\n");
 571                         edp_info->lt_info.lt_status = DP_LT_FAIL;
 572                         return ret;
 573                 }
 574         }
 575
 576         return ret;
 577 }
 578
 579 static unsigned int exynos_dp_process_equalizer_training(struct edp_device_info
 580                 *edp_info)
 581 {
 582         unsigned int ret = EXYNOS_DP_SUCCESS;
 583         unsigned char lane_stat, adj_req_sw, adj_req_em, i;
 584         unsigned char lt_ctl_val[DP_LANE_CNT_4] = {0,};
 585         unsigned char interlane_aligned = 0;
 586         unsigned char f_bw;
 587         unsigned char f_lane_cnt;
 588         unsigned char sink_stat;
 589
 590         mdelay(1);
 591
 592         ret = exynos_dp_read_dpcd_lane_stat(edp_info, &lane_stat);
 593         if (ret != EXYNOS_DP_SUCCESS) {
 594                 printf("DP read lane status failed\n");
 595                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 596                 return ret;
 597         }
 598
 599         debug("DP lane stat : %x\n", lane_stat);
 600
 601         if (lane_stat & DP_LANE_STAT_CR_DONE) {
 602                 ret = exynos_dp_read_byte_from_dpcd(DPCD_LN_ALIGN_UPDATED,
 603                                 &sink_stat);
 604                 if (ret != EXYNOS_DP_SUCCESS) {
 605                         edp_info->lt_info.lt_status = DP_LT_FAIL;
 606
 607                         return ret;
 608                 }
 609
 610                 interlane_aligned = (sink_stat & DPCD_INTERLANE_ALIGN_DONE);
 611
 612                 for (i = 0; i < edp_info->lane_cnt; i++) {
 613                         ret = exynos_dp_read_dpcd_adj_req(i,
 614                                         &adj_req_sw, &adj_req_em);
 615                         if (ret != EXYNOS_DP_SUCCESS) {
 616                                 printf("DP read adj req 1 failed\n");
 617                                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 618
 619                                 return ret;
 620                         }
 621
 622                         lt_ctl_val[i] = 0;
 623                         lt_ctl_val[i] = adj_req_em << 3 | adj_req_sw;
 624
 625                         if ((adj_req_sw == VOLTAGE_LEVEL_3) ||
 626                                 (adj_req_em == PRE_EMPHASIS_LEVEL_3)) {
 627                                 lt_ctl_val[i] |= MAX_DRIVE_CURRENT_REACH_3;
 628                                 lt_ctl_val[i] |= MAX_PRE_EMPHASIS_REACH_3;
 629                         }
 630                 }
 631
 632                 if (((lane_stat&DP_LANE_STAT_CE_DONE) &&
 633                         (lane_stat&DP_LANE_STAT_SYM_LOCK))
 634                         && (interlane_aligned == DPCD_INTERLANE_ALIGN_DONE)) {
 635                         debug("DP Equalizer training succeed\n");
 636
 637                         f_bw = exynos_dp_get_link_bandwidth();
 638                         f_lane_cnt = exynos_dp_get_lane_count();
 639
 640                         debug("DP final BandWidth : %x\n", f_bw);
 641                         debug("DP final Lane Count : %x\n", f_lane_cnt);
 642
 643                         edp_info->lt_info.lt_status = DP_LT_FINISHED;
 644
 645                         exynos_dp_equalizer_err_link(edp_info);
 646
 647                 } else {
 648                         edp_info->lt_info.ep_loop++;
 649
 650                         if (edp_info->lt_info.ep_loop > MAX_EQ_LOOP) {
 651                                 if (edp_info->lane_bw == DP_LANE_BW_2_70) {
 652                                         ret = exynos_dp_reduce_link_rate(
 653                                                         edp_info);
 654                                 } else {
 655                                         edp_info->lt_info.lt_status =
 656                                                                 DP_LT_FAIL;
 657                                         exynos_dp_equalizer_err_link(edp_info);
 658                                 }
 659                         } else {
 660                                 for (i = 0; i < edp_info->lane_cnt; i++)
 661                                         exynos_dp_set_lanex_pre_emphasis(
 662                                                         lt_ctl_val[i], i);
 663
 664                                 ret = exynos_dp_write_bytes_to_dpcd(
 665                                         DPCD_TRAINING_LANE0_SET,
 666                                         4, lt_ctl_val);
 667                                 if (ret != EXYNOS_DP_SUCCESS) {
 668                                         printf("DP set lt pattern failed\n");
 669                                         edp_info->lt_info.lt_status =
 670                                                                 DP_LT_FAIL;
 671                                         exynos_dp_equalizer_err_link(edp_info);
 672                                 }
 673                         }
 674                 }
 675         } else if (edp_info->lane_bw == DP_LANE_BW_2_70) {
 676                 ret = exynos_dp_reduce_link_rate(edp_info);
 677         } else {
 678                 edp_info->lt_info.lt_status = DP_LT_FAIL;
 679                 exynos_dp_equalizer_err_link(edp_info);
 680         }
 681
 682         return ret;
 683 }
 684
 685 static unsigned int exynos_dp_sw_link_training(struct edp_device_info *edp_info)
 686 {
 687         unsigned int ret = 0;
 688         int training_finished;
 689
 690         /* Turn off unnecessary lane */
 691         if (edp_info->lane_cnt == 1)
 692                 exynos_dp_set_analog_power_down(CH1_BLOCK, 1);
 693
 694         training_finished = 0;
 695
 696         edp_info->lt_info.lt_status = DP_LT_START;
 697
 698         /* Process here */
 699         while (!training_finished) {
 700                 switch (edp_info->lt_info.lt_status) {
 701                 case DP_LT_START:
 702                         ret = exynos_dp_link_start(edp_info);
 703                         if (ret != EXYNOS_DP_SUCCESS) {
 704                                 printf("DP LT:link start failed\n");
 705                                 return ret;
 706                         }
 707                         break;
 708                 case DP_LT_CR:
 709                         ret = exynos_dp_process_clock_recovery(edp_info);
 710                         if (ret != EXYNOS_DP_SUCCESS) {
 711                                 printf("DP LT:clock recovery failed\n");
 712                                 return ret;
 713                         }
 714                         break;
 715                 case DP_LT_ET:
 716                         ret = exynos_dp_process_equalizer_training(edp_info);
 717                         if (ret != EXYNOS_DP_SUCCESS) {
 718                                 printf("DP LT:equalizer training failed\n");
 719                                 return ret;
 720                         }
 721                         break;
 722                 case DP_LT_FINISHED:
 723                         training_finished = 1;
 724                         break;
 725                 case DP_LT_FAIL:
 726                         return -1;
 727                 }
 728         }
 729
 730         return ret;
 731 }
 732
 733 static unsigned int exynos_dp_set_link_train(struct edp_device_info *edp_info)
 734 {
 735         unsigned int ret;
 736
 737         exynos_dp_init_training();
 738
 739         ret = exynos_dp_sw_link_training(edp_info);
 740         if (ret != EXYNOS_DP_SUCCESS)
 741                 printf("DP dp_sw_link_traning() failed\n");
 742
 743         return ret;
 744 }
 745
 746 static void exynos_dp_enable_scramble(unsigned int enable)
 747 {
 748         unsigned char data;
 749
 750         if (enable) {
 751                 exynos_dp_enable_scrambling(DP_ENABLE);
 752
 753                 exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET,
 754                                 &data);
 755                 exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
 756                         (u8)(data & ~DPCD_SCRAMBLING_DISABLED));
 757         } else {
 758                 exynos_dp_enable_scrambling(DP_DISABLE);
 759                 exynos_dp_read_byte_from_dpcd(DPCD_TRAINING_PATTERN_SET,
 760                                 &data);
 761                 exynos_dp_write_byte_to_dpcd(DPCD_TRAINING_PATTERN_SET,
 762                         (u8)(data | DPCD_SCRAMBLING_DISABLED));
 763         }
 764 }
 765
 766 static unsigned int exynos_dp_config_video(struct edp_device_info *edp_info)
 767 {
 768         unsigned int ret = 0;
 769         unsigned int retry_cnt;
 770
 771         mdelay(1);
 772
 773         if (edp_info->video_info.master_mode) {
 774                 printf("DP does not support master mode\n");
 775                 return -ENODEV;
 776         } else {
 777                 /* debug slave */
 778                 exynos_dp_config_video_slave_mode(&edp_info->video_info);
 779         }
 780
 781         exynos_dp_set_video_color_format(&edp_info->video_info);
 782
 783         if (edp_info->video_info.bist_mode) {
 784                 if (exynos_dp_config_video_bist(edp_info) != 0)
 785                         return -1;
 786         }
 787
 788         ret = exynos_dp_get_pll_lock_status();
 789         if (ret != PLL_LOCKED) {
 790                 printf("DP PLL is not locked yet\n");
 791                 return -EIO;
 792         }
 793
 794         if (edp_info->video_info.master_mode == 0) {
 795                 retry_cnt = 10;
 796                 while (retry_cnt) {
 797                         ret = exynos_dp_is_slave_video_stream_clock_on();
 798                         if (ret != EXYNOS_DP_SUCCESS) {
 799                                 if (retry_cnt == 0) {
 800                                         printf("DP stream_clock_on failed\n");
 801                                         return ret;
 802                                 }
 803                                 retry_cnt--;
 804                                 mdelay(1);
 805                         } else
 806                                 break;
 807                 }
 808         }
 809
 810         /* Set to use the register calculated M/N video */
 811         exynos_dp_set_video_cr_mn(CALCULATED_M, 0, 0);
 812
 813         /* For video bist, Video timing must be generated by register */
 814         exynos_dp_set_video_timing_mode(VIDEO_TIMING_FROM_CAPTURE);
 815
 816         /* Enable video bist */
 817         if (edp_info->video_info.bist_pattern != COLOR_RAMP &&
 818                 edp_info->video_info.bist_pattern != BALCK_WHITE_V_LINES &&
 819                 edp_info->video_info.bist_pattern != COLOR_SQUARE)
 820                 exynos_dp_enable_video_bist(edp_info->video_info.bist_mode);
 821         else
 822                 exynos_dp_enable_video_bist(DP_DISABLE);
 823
 824         /* Disable video mute */
 825         exynos_dp_enable_video_mute(DP_DISABLE);
 826
 827         /* Configure video Master or Slave mode */
 828         exynos_dp_enable_video_master(edp_info->video_info.master_mode);
 829
 830         /* Enable video */
 831         exynos_dp_start_video();
 832
 833         if (edp_info->video_info.master_mode == 0) {
 834                 retry_cnt = 100;
 835                 while (retry_cnt) {
 836                         ret = exynos_dp_is_video_stream_on();
 837                         if (ret != EXYNOS_DP_SUCCESS) {
 838                                 if (retry_cnt == 0) {
 839                                         printf("DP Timeout of video stream\n");
 840                                         return ret;
 841                                 }
 842                                 retry_cnt--;
 843                                 mdelay(5);
 844                         } else
 845                                 break;
 846                 }
 847         }
 848
 849         return ret;
 850 }
 851
 852 int exynos_dp_parse_dt(const void *blob, struct edp_device_info *edp_info)
 853 {
 854         unsigned int node = fdtdec_next_compatible(blob, 0,
 855                                                 COMPAT_SAMSUNG_EXYNOS5_DP);
 856         if (node <= 0) {
 857                 debug("exynos_dp: Can't get device node for dp\n");
 858                 return -ENODEV;
 859         }
 860
 861         edp_info->disp_info.h_res = fdtdec_get_int(blob, node,
 862                                                         "samsung,h-res", 0);
 863         edp_info->disp_info.h_sync_width = fdtdec_get_int(blob, node,
 864                                                 "samsung,h-sync-width", 0);
 865         edp_info->disp_info.h_back_porch = fdtdec_get_int(blob, node,
 866                                                 "samsung,h-back-porch", 0);
 867         edp_info->disp_info.h_front_porch = fdtdec_get_int(blob, node,
 868                                                 "samsung,h-front-porch", 0);
 869         edp_info->disp_info.v_res = fdtdec_get_int(blob, node,
 870                                                 "samsung,v-res", 0);
 871         edp_info->disp_info.v_sync_width = fdtdec_get_int(blob, node,
 872                                                 "samsung,v-sync-width", 0);
 873         edp_info->disp_info.v_back_porch = fdtdec_get_int(blob, node,
 874                                                 "samsung,v-back-porch", 0);
 875         edp_info->disp_info.v_front_porch = fdtdec_get_int(blob, node,
 876                                                 "samsung,v-front-porch", 0);
 877         edp_info->disp_info.v_sync_rate = fdtdec_get_int(blob, node,
 878                                                 "samsung,v-sync-rate", 0);
 879
 880         edp_info->lt_info.lt_status = fdtdec_get_int(blob, node,
 881                                                 "samsung,lt-status", 0);
 882
 883         edp_info->video_info.master_mode = fdtdec_get_int(blob, node,
 884                                                 "samsung,master-mode", 0);
 885         edp_info->video_info.bist_mode = fdtdec_get_int(blob, node,
 886                                                 "samsung,bist-mode", 0);
 887         edp_info->video_info.bist_pattern = fdtdec_get_int(blob, node,
 888                                                 "samsung,bist-pattern", 0);
 889         edp_info->video_info.h_sync_polarity = fdtdec_get_int(blob, node,
 890                                                 "samsung,h-sync-polarity", 0);
 891         edp_info->video_info.v_sync_polarity = fdtdec_get_int(blob, node,
 892                                                 "samsung,v-sync-polarity", 0);
 893         edp_info->video_info.interlaced = fdtdec_get_int(blob, node,
 894                                                 "samsung,interlaced", 0);
 895         edp_info->video_info.color_space = fdtdec_get_int(blob, node,
 896                                                 "samsung,color-space", 0);
 897         edp_info->video_info.dynamic_range = fdtdec_get_int(blob, node,
 898                                                 "samsung,dynamic-range", 0);
 899         edp_info->video_info.ycbcr_coeff = fdtdec_get_int(blob, node,
 900                                                 "samsung,ycbcr-coeff", 0);
 901         edp_info->video_info.color_depth = fdtdec_get_int(blob, node,
 902                                                 "samsung,color-depth", 0);
 903         return 0;
 904 }
 905
 906 unsigned int exynos_init_dp(void)
 907 {
 908         unsigned int ret;
 909         struct edp_device_info *edp_info;
 910
 911         edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL);
 912         if (!edp_info) {
 913                 debug("failed to allocate edp device object.\n");
 914                 return -EFAULT;
 915         }
 916
 917         if (exynos_dp_parse_dt(gd->fdt_blob, edp_info))
 918                 debug("unable to parse DP DT node\n");
 919
 920         exynos_dp_set_base_addr();
 921
 922         exynos_dp_disp_info(&edp_info->disp_info);
 923
 924         exynos_set_dp_phy(1);
 925
 926         ret = exynos_dp_init_dp();
 927         if (ret != EXYNOS_DP_SUCCESS) {
 928                 printf("DP exynos_dp_init_dp() failed\n");
 929                 return ret;
 930         }
 931
 932         ret = exynos_dp_handle_edid(edp_info);
 933         if (ret != EXYNOS_DP_SUCCESS) {
 934                 printf("EDP handle_edid fail\n");
 935                 return ret;
 936         }
 937
 938         ret = exynos_dp_set_link_train(edp_info);
 939         if (ret != EXYNOS_DP_SUCCESS) {
 940                 printf("DP link training fail\n");
 941                 return ret;
 942         }
 943
 944         exynos_dp_enable_scramble(DP_ENABLE);
 945         exynos_dp_enable_rx_to_enhanced_mode(DP_ENABLE);
 946         exynos_dp_enable_enhanced_mode(DP_ENABLE);
 947
 948         exynos_dp_set_link_bandwidth(edp_info->lane_bw);
 949         exynos_dp_set_lane_count(edp_info->lane_cnt);
 950
 951         exynos_dp_init_video();
 952         ret = exynos_dp_config_video(edp_info);
 953         if (ret != EXYNOS_DP_SUCCESS) {
 954                 printf("Exynos DP init failed\n");
 955                 return ret;
 956         }
 957
 958         debug("Exynos DP init done\n");
 959
 960         return ret;
 961 }