]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - drivers/video/mxsfb.c
Merge branch 'master' of git://git.denx.de/u-boot-video
[karo-tx-uboot.git] / drivers / video / mxsfb.c
1 /*
2  * Freescale i.MX23/i.MX28 LCDIF driver
3  *
4  * Copyright (C) 2011-2013 Marek Vasut <marex@denx.de>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License as
8  * published by the Free Software Foundation; either version 2 of
9  * the License, or (at your option) any later version.
10  *
11  * This program is distributed in the hope that it will be useful,
12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  * GNU General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
19  * MA 02111-1307 USA
20  */
21 #include <common.h>
22 #include <malloc.h>
23 #include <video_fb.h>
24
25 #include <asm/arch/imx-regs.h>
26 #include <asm/arch/clock.h>
27 #include <asm/arch/sys_proto.h>
28 #include <asm/errno.h>
29 #include <asm/io.h>
30
31 #include "videomodes.h"
32
33 #define PS2KHZ(ps)      (1000000000UL / (ps))
34
35 static GraphicDevice panel;
36
37 /*
38  * DENX M28EVK:
39  * setenv videomode
40  * video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,
41  *       le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0
42  */
43
44 static void mxs_lcd_init(GraphicDevice *panel,
45                         struct ctfb_res_modes *mode, int bpp)
46 {
47         struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
48         uint32_t word_len = 0, bus_width = 0;
49         uint8_t valid_data = 0;
50
51         /* Kick in the LCDIF clock */
52         mxs_set_lcdclk(PS2KHZ(mode->pixclock));
53
54         /* Restart the LCDIF block */
55         mxs_reset_block(&regs->hw_lcdif_ctrl_reg);
56
57         switch (bpp) {
58         case 24:
59                 word_len = LCDIF_CTRL_WORD_LENGTH_24BIT;
60                 bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT;
61                 valid_data = 0x7;
62                 break;
63         case 18:
64                 word_len = LCDIF_CTRL_WORD_LENGTH_24BIT;
65                 bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT;
66                 valid_data = 0x7;
67                 break;
68         case 16:
69                 word_len = LCDIF_CTRL_WORD_LENGTH_16BIT;
70                 bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT;
71                 valid_data = 0xf;
72                 break;
73         case 8:
74                 word_len = LCDIF_CTRL_WORD_LENGTH_8BIT;
75                 bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT;
76                 valid_data = 0xf;
77                 break;
78         }
79
80         writel(bus_width | word_len | LCDIF_CTRL_DOTCLK_MODE |
81                 LCDIF_CTRL_BYPASS_COUNT | LCDIF_CTRL_LCDIF_MASTER,
82                 &regs->hw_lcdif_ctrl);
83
84         writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET,
85                 &regs->hw_lcdif_ctrl1);
86         writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres,
87                 &regs->hw_lcdif_transfer_count);
88
89         writel(LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL |
90                 LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT |
91                 LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT |
92                 mode->vsync_len, &regs->hw_lcdif_vdctrl0);
93         writel(mode->upper_margin + mode->lower_margin +
94                 mode->vsync_len + mode->yres,
95                 &regs->hw_lcdif_vdctrl1);
96         writel((mode->hsync_len << LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET) |
97                 (mode->left_margin + mode->right_margin +
98                 mode->hsync_len + mode->xres),
99                 &regs->hw_lcdif_vdctrl2);
100         writel(((mode->left_margin + mode->hsync_len) <<
101                 LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET) |
102                 (mode->upper_margin + mode->vsync_len),
103                 &regs->hw_lcdif_vdctrl3);
104         writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | mode->xres,
105                 &regs->hw_lcdif_vdctrl4);
106
107         writel(panel->frameAdrs, &regs->hw_lcdif_cur_buf);
108         writel(panel->frameAdrs, &regs->hw_lcdif_next_buf);
109
110         /* Flush FIFO first */
111         writel(LCDIF_CTRL1_FIFO_CLEAR, &regs->hw_lcdif_ctrl1_set);
112
113         /* Sync signals ON */
114         setbits_le32(&regs->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON);
115
116         /* FIFO cleared */
117         writel(LCDIF_CTRL1_FIFO_CLEAR, &regs->hw_lcdif_ctrl1_clr);
118
119         /* RUN! */
120         writel(LCDIF_CTRL_RUN, &regs->hw_lcdif_ctrl_set);
121 }
122
123 void *video_hw_init(void)
124 {
125         int bpp = -1;
126         char *penv;
127         void *fb;
128         struct ctfb_res_modes mode;
129
130         puts("Video: ");
131
132         /* Suck display configuration from "videomode" variable */
133         penv = getenv("videomode");
134         if (!penv) {
135                 printf("MXSFB: 'videomode' variable not set!");
136                 return NULL;
137         }
138
139         bpp = video_get_params(&mode, penv);
140
141         /* fill in Graphic device struct */
142         sprintf(panel.modeIdent, "%dx%dx%d",
143                         mode.xres, mode.yres, bpp);
144
145         panel.winSizeX = mode.xres;
146         panel.winSizeY = mode.yres;
147         panel.plnSizeX = mode.xres;
148         panel.plnSizeY = mode.yres;
149
150         switch (bpp) {
151         case 24:
152         case 18:
153                 panel.gdfBytesPP = 4;
154                 panel.gdfIndex = GDF_32BIT_X888RGB;
155                 break;
156         case 16:
157                 panel.gdfBytesPP = 2;
158                 panel.gdfIndex = GDF_16BIT_565RGB;
159                 break;
160         case 8:
161                 panel.gdfBytesPP = 1;
162                 panel.gdfIndex = GDF__8BIT_INDEX;
163                 break;
164         default:
165                 printf("MXSFB: Invalid BPP specified! (bpp = %i)\n", bpp);
166                 return NULL;
167         }
168
169         panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP;
170
171         /* Allocate framebuffer */
172         fb = malloc(panel.memSize);
173         if (!fb) {
174                 printf("MXSFB: Error allocating framebuffer!\n");
175                 return NULL;
176         }
177
178         /* Wipe framebuffer */
179         memset(fb, 0, panel.memSize);
180
181         panel.frameAdrs = (u32)fb;
182
183         printf("%s\n", panel.modeIdent);
184
185         /* Start framebuffer */
186         mxs_lcd_init(&panel, &mode, bpp);
187
188         return (void *)&panel;
189 }