include/cmd_bsp.h

   1 /*
   2  * (C) Copyright 2001, 2002
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #ifndef _CMD_BSP_H_
  25 #define _CMD_BSP_H_
  26
  27 #include <common.h>
  28 #include <command.h>
  29
  30 #if (CONFIG_COMMANDS & CFG_CMD_BSP)
  31
  32 /* ----- LWMON ---------------------------------------------------------
  33  */
  34 #if defined(CONFIG_LWMON)
  35
  36 #define CMD_TBL_BSP     MK_CMD_TBL_ENTRY(                                       \
  37         "pic",  3,      4,      1,      do_pic,                                 \
  38         "pic     - read and write PIC registers\n",                             \
  39         "read  reg      - read PIC register `reg'\n"                            \
  40         "pic write reg val  - write value `val' to PIC register `reg'\n"        \
  41 ),  MK_CMD_TBL_ENTRY(                                                           \
  42         "kbd",  3,      1,      1,      do_kbd,                                 \
  43         "kbd     - read keyboard status\n",                                     \
  44         NULL                                                                    \
  45 ),  MK_CMD_TBL_ENTRY(                                                           \
  46         "lsb",  3,      2,      1,      do_lsb,                                 \
  47         "lsb     - check and set LSB switch\n",                                 \
  48         "on  - switch LSB on\n"                                                 \
  49         "lsb off - switch LSB off\n"                                            \
  50         "lsb     - print current setting\n"                                     \
  51 ),
  52 int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
  53 int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
  54 int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
  55
  56 #endif  /* CONFIG_LWMON */
  57 /* -------------------------------------------------------------------- */
  58
  59 /* ----- PCU E -------------------------------------------------------- */
  60 #if defined(CONFIG_PCU_E)
  61
  62 #define CMD_TBL_BSP     MK_CMD_TBL_ENTRY(                                       \
  63         "puma", 4,      4,      1,      do_puma,                                \
  64         "puma    - access PUMA FPGA\n",                                         \
  65         "status - print PUMA status\n"                                          \
  66         "puma load addr len - load PUMA configuration data\n"                   \
  67 ),
  68 int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
  69
  70 #endif  /* CONFIG_PCU_E */
  71 /* -------------------------------------------------------------------- */
  72
  73 /* ----- CCM/SCM ------------------------------------------------------ */
  74 #if defined(CONFIG_CCM) || defined(CONFIG_SCM)
  75
  76 #define CMD_TBL_BSP     MK_CMD_TBL_ENTRY(                                       \
  77         "fpga", 4,      4,      1,      do_fpga,                                \
  78         "fpga    - access FPGA(s)\n",                                           \
  79         "fpga status [name] - print FPGA status\n"                              \
  80         "fpga reset  [name] - reset FPGA\n"                                     \
  81         "fpga load [name] addr - load FPGA configuration data\n"                \
  82 ),
  83 int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
  84
  85 #endif  /* CONFIG_CCM, CONFIG_SCM */
  86 /* -------------------------------------------------------------------- */
  87
  88 /* ----- PIP405 ------------------------------------------------------- */
  89 #if defined(CONFIG_PIP405)
  90
  91 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY(                           \
  92         "pip405",       4,      6,      1,      do_pip405,                      \
  93         "pip405  - PIP405 specific Cmds\n",                                     \
  94         "flash mem [SrcAddr] - updates U-Boot with image in memory\n"                                   \
  95         "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"                                       \
  96         "pip405 flash mps - updates U-Boot with image from MPS\n"                                       \
  97 ),
  98 int do_pip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
  99
 100 #endif /* CONFIG_PIP405 */
 101 /* -------------------------------------------------------------------- */
 102
 103 /* ----- MIP405 ------------------------------------------------------- */
 104 #if defined(CONFIG_MIP405)
 105
 106 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY(                           \
 107         "mip405",       4,      6,      1,      do_mip405,                      \
 108         "mip405  - MIP405 specific Cmds\n",                                     \
 109         "flash mem [SrcAddr] - updates U-Boot with image in memory\n"                                   \
 110         "mip405 flash mps - updates U-Boot with image from MPS\n"                                       \
 111 ),
 112 int do_mip405 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 113
 114 #endif /* CONFIG_MIP405 */
 115 /* ----- VCMA9 -----------------------------------------------------------------
 116  */
 117 #if defined(CONFIG_VCMA9)
 118
 119 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY(                           \
 120         "vcma9",        4,      6,      1,      do_vcma9,       \
 121         "vcma9   - VCMA9 specific Cmds\n",                      \
 122         "flash mem [SrcAddr] - updates U-Boot with image in memory\n"                                   \
 123 ),
 124 int do_vcma9 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 125
 126 #endif /* CONFIG_VCMA9 */
 127 /* ----------------------------------------------------------------------------*/
 128
 129 /* ----- DASA_SIM ----------------------------------------------------- */
 130 #if defined(CONFIG_DASA_SIM)
 131
 132 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY(                                           \
 133         "pci9054",      7,      3,      1,      do_pci9054,                     \
 134         "pci9054 - PLX PCI9054 EEPROM access\n",                                \
 135         "pci9054 info - print EEPROM values\n"                                  \
 136         "pci9054 update - updates EEPROM with default values\n"                 \
 137 ),
 138 int do_pci9054 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 139
 140 #endif /* CONFIG_DASA_SIM */
 141 /* -------------------------------------------------------------------- */
 142
 143 /* ----- HYMOD -------------------------------------------------------- */
 144 #if defined(CONFIG_HYMOD)
 145
 146 #define CMD_TBL_BSP     MK_CMD_TBL_ENTRY(                               \
 147         "fpga", 4,      6,      1,      do_fpga,                        \
 148         "fpga    - FPGA sub-system\n",                                  \
 149         "load [type] addr size\n"                                       \
 150         "  - write the configuration data at memory address `addr',\n"  \
 151         "    size `size' bytes, into the FPGA of type `type' (either\n" \
 152         "    `main' or `mezz', default `main'). e.g.\n"                 \
 153         "        `fpga load 100000 7d8f'\n"                             \
 154         "    loads the main FPGA with config data at address 100000\n"  \
 155         "    HEX, size 7d8f HEX (32143 DEC) bytes\n"                    \
 156         "fpga tftp file addr\n"                                         \
 157         "  - transfers `file' from the tftp server into memory at\n"    \
 158         "    address `addr', then writes the entire file contents\n"    \
 159         "    into the main FPGA\n"                                      \
 160         "fpga store addr\n"                                             \
 161         "  - read configuration data from the main FPGA (the mezz\n"    \
 162         "    FPGA is write-only), into address `addr'. There must be\n" \
 163         "    enough memory available at `addr' to hold all the config\n"\
 164         "    data - the size of which is determined by VC:???\n"        \
 165         "fpga info\n"                                                   \
 166         "  - print information about the Hymod FPGA, namely the\n"      \
 167         "    memory addresses at which the four FPGA local bus\n"       \
 168         "    address spaces appear in the physical address space\n"     \
 169 ), MK_CMD_TBL_ENTRY(                                                    \
 170         "eeclear", 4,   1,      0,      do_eecl,                        \
 171         "eeclear - Clear the eeprom on a Hymod board \n",               \
 172         "[type]\n"                                                      \
 173         "  - write zeroes into the EEPROM on the board of type `type'\n"\
 174         "    (`type' is either `main' or `mezz' - default `main')\n"    \
 175         "    Note: the EEPROM write enable jumper must be installed\n"  \
 176 ),
 177 int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 178 int do_eecl (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 179
 180 #endif  /* CONFIG_HYMOD */
 181 /* -------------------------------------------------------------------- */
 182
 183 /* ----- CRAY405 (L1) ------------------------------------------------- */
 184 #if defined (CONFIG_CRAYL1)
 185 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY(                                           \
 186         "L1cmd",        5,      4,      1,      do_crayL1,                      \
 187         "L1cmd  - L1 update, setup, commands \n",                               \
 188         "L1cmd update - update flash images from host\n"                        \
 189         "L1cmd boot - nfs or ramboot L1\n"                                      \
 190 ),
 191 int do_crayL1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 192 #endif /* CONFIG_CRAY405 */
 193 /* -------------------------------------------------------------------- */
 194
 195 /* ----- EVB64260 ----------------------------------------------------- */
 196 #if defined (CONFIG_EVB64260)
 197 #ifdef CONFIG_ZUMA_V2
 198 #define CMD_TBL_BSP  ZUMA_TBL_ENTRY
 199
 200 #define ZUMA_TBL_ENTRY  MK_CMD_TBL_ENTRY(                               \
 201         "zinit",         5,      1,      0,      do_zuma_init_pbb,      \
 202         "zinit   - init zuma pbb\n",                                    \
 203         "\n"                                                            \
 204         "    - init zuma pbb\n"                                         \
 205 ), MK_CMD_TBL_ENTRY(                                                    \
 206         "zdtest",         6,      3,      1,      do_zuma_test_dma,     \
 207         "zdtest  - run dma test\n",                                     \
 208         "[cmd [count]]\n"                                               \
 209         "    - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" \
 210 ), MK_CMD_TBL_ENTRY(                                                    \
 211         "zminit",         5,      1,      0,      do_zuma_init_mbox,    \
 212         "zminit  - init zuma mbox\n",                           \
 213         "\n"                                                            \
 214         "    - init zuma mbox\n"                                        \
 215 ),
 216
 217 int do_zuma_init_pbb  (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 218 int do_zuma_test_dma  (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 219 int do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 220
 221 void zuma_init_pbb(void);
 222 int zuma_mbox_init(void);
 223 int zuma_test_dma(int cmd, int size);
 224 #else
 225 #define CMD_TBL_BSP
 226 #endif /* ZUMA_NTL */
 227
 228 #endif /* CONFIG_EVB64260 */
 229 /* -------------------------------------------------------------------- */
 230
 231 /* -----W7O------------------------------------------------------------ */
 232 #if defined(CONFIG_W7O)
 233
 234 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY(                   \
 235           "vpd",        3,      2,      1,      do_vpd, \
 236           "vpd     - Read Vital Product Data\n",        \
 237           "[dev_addr]\n"                                \
 238           "        - Read VPD Data from default address, or device address 'dev_addr'.\n" \
 239 ),
 240
 241 extern int do_vpd (cmd_tbl_t *, int, int, char *[]);
 242
 243 #endif  /* CONFIG_W7O */
 244 /* -------------------------------------------------------------------- */
 245
 246 /* ---- PCIPPC2 / PCIPPC6 --------------------------------------------- */
 247 #if defined(CONFIG_PCIPPC2) || defined(CONFIG_PCIPPC6)
 248 #if defined(CONFIG_WATCHDOG)
 249
 250 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY(                   \
 251         "wd",   3,      2,      1,      do_wd,          \
 252         "wd      - check and set watchdog\n",           \
 253         "on   - switch watchDog on\n"                   \
 254         "wd off  - switch watchdog off\n"               \
 255         "wd      - print current status\n"              \
 256 ),
 257
 258 extern int do_wd (cmd_tbl_t *, int, int, char *[]);
 259
 260 #else
 261 #define CMD_TBL_BSP
 262 #endif  /* CONFIG_WATCHDOG */
 263
 264 #endif  /* CONFIG_PCIPPC2 , CONFIG_PCIPPC6 */
 265 /* -------------------------------------------------------------------- */
 266
 267 /* ----- PN62 --------------------------------------------------------- */
 268 #if defined(CONFIG_PN62)
 269
 270 #define CMD_TBL_BSP MK_CMD_TBL_ENTRY(                           \
 271         "loadpci",      5,      2,      1,      do_loadpci,     \
 272         "loadpci - load binary file over PCI\n",                \
 273         "[addr]\n"                                              \
 274         "    - load binary file over PCI to address 'addr'\n"   \
 275 ), MK_CMD_TBL_ENTRY(                                            \
 276         "led"    ,      3,      3,      1,      do_led,         \
 277         "led     - set LED 0..11 on the PN62 board\n",          \
 278         "i fun\n"                                               \
 279         "    - set 'i'th LED to function 'fun'\n"               \
 280 ),
 281
 282 extern int do_loadpci (cmd_tbl_t *, int, int, char *[]);
 283 extern int do_led (cmd_tbl_t *, int, int, char *[]);
 284 #endif /* CONFIG_PN62 */
 285 /* -------------------------------------------------------------------- */
 286
 287 /* ----- TRAB --------------------------------------------------------- */
 288 #if defined(CONFIG_TRAB)
 289
 290 #define CMD_TBL_BSP     MK_CMD_TBL_ENTRY(                       \
 291         "kbd",  3,      1,      1,      do_kbd,                 \
 292         "kbd     - read keyboard status\n",                     \
 293         NULL                                                    \
 294 ),
 295
 296 int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 297
 298 #endif  /* CONFIG_TRAB */
 299 /* -------------------------------------------------------------------- */
 300
 301 /* ----- R360MPI ------------------------------------------------------ */
 302 #if defined(CONFIG_R360MPI)
 303
 304 #define CMD_TBL_BSP     MK_CMD_TBL_ENTRY(                       \
 305         "kbd",  3,      1,      1,      do_kbd,                 \
 306         "kbd     - read keyboard status\n",                     \
 307         NULL                                                    \
 308 ),
 309
 310 int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 311
 312 #endif  /* CONFIG_R360MPI */
 313 /* -------------------------------------------------------------------- */
 314
 315 /* ------ AMIGAONEG3SE ------------------------------------------------ */
 316 #if defined(CONFIG_AMIGAONEG3SE)
 317
 318 #define CMD_TBL_BSP     /* dummy */
 319
 320 #endif  /* AmigaOneG3SE */
 321 /* -------------------------------------------------------------------- */
 322
 323 #else
 324 #define CMD_TBL_BSP
 325 #endif  /* CFG_CMD_BSP */
 326
 327 #endif  /* _CMD_BSP_H_ */