include/configs/P1022DS.h

   1 /*
   2  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   3  * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
   4  *          Timur Tabi <timur@freescale.com>
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of the GNU General Public License as published by the Free
   8  * Software Foundation; either version 2 of the License, or (at your option)
   9  * any later version.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include "../board/freescale/common/ics307_clk.h"
  16
  17 #ifdef CONFIG_36BIT
  18 #define CONFIG_PHYS_64BIT
  19 #endif
  20
  21 #ifdef CONFIG_SDCARD
  22 #define CONFIG_RAMBOOT_SDCARD
  23 #define CONFIG_SYS_RAMBOOT
  24 #define CONFIG_SYS_EXTRA_ENV_RELOC
  25 #define CONFIG_SYS_TEXT_BASE            0x11000000
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  27 #endif
  28
  29 #ifdef CONFIG_SPIFLASH
  30 #define CONFIG_RAMBOOT_SPIFLASH
  31 #define CONFIG_SYS_RAMBOOT
  32 #define CONFIG_SYS_EXTRA_ENV_RELOC
  33 #define CONFIG_SYS_TEXT_BASE            0x11000000
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0x1107fffc
  35 #endif
  36
  37 #define CONFIG_NAND_FSL_ELBC
  38
  39 #ifdef CONFIG_NAND
  40 #define CONFIG_SPL
  41 #define CONFIG_SPL_INIT_MINIMAL
  42 #define CONFIG_SPL_SERIAL_SUPPORT
  43 #define CONFIG_SPL_NAND_SUPPORT
  44 #define CONFIG_SPL_NAND_MINIMAL
  45 #define CONFIG_SPL_FLUSH_IMAGE
  46 #define CONFIG_SPL_TARGET              "u-boot-with-spl.bin"
  47
  48 #define CONFIG_SYS_TEXT_BASE           0x00201000
  49 #define CONFIG_SPL_TEXT_BASE           0xfffff000
  50 #define CONFIG_SPL_MAX_SIZE            4096
  51 #define CONFIG_SPL_RELOC_TEXT_BASE     0x00100000
  52 #define CONFIG_SPL_RELOC_STACK         0x00100000
  53 #define CONFIG_SYS_NAND_U_BOOT_SIZE    ((512 << 10) + CONFIG_SPL_MAX_SIZE)
  54 #define CONFIG_SYS_NAND_U_BOOT_DST     (0x00200000 - CONFIG_SPL_MAX_SIZE)
  55 #define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
  56 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0
  57 #define CONFIG_SYS_LDSCRIPT            "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  58 #endif
  59
  60 /* High Level Configuration Options */
  61 #define CONFIG_BOOKE                    /* BOOKE */
  62 #define CONFIG_E500                     /* BOOKE e500 family */
  63 #define CONFIG_MPC85xx                  /* MPC8540/60/55/41/48 */
  64 #define CONFIG_P1022
  65 #define CONFIG_P1022DS
  66 #define CONFIG_MP                       /* support multiple processors */
  67
  68 #ifndef CONFIG_SYS_TEXT_BASE
  69 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  70 #endif
  71
  72 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  73 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  74 #endif
  75
  76 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  77 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  78 #define CONFIG_PCIE1                    /* PCIE controler 1 (slot 1) */
  79 #define CONFIG_PCIE2                    /* PCIE controler 2 (slot 2) */
  80 #define CONFIG_PCIE3                    /* PCIE controler 3 (ULI bridge) */
  81 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  82 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  83 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  84
  85 #define CONFIG_ENABLE_36BIT_PHYS
  86
  87 #ifdef CONFIG_PHYS_64BIT
  88 #define CONFIG_ADDR_MAP
  89 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
  90 #endif
  91
  92 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  93
  94 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
  95 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
  96 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
  97
  98 /*
  99  * These can be toggled for performance analysis, otherwise use default.
 100  */
 101 #define CONFIG_L2_CACHE
 102 #define CONFIG_BTB
 103
 104 #define CONFIG_SYS_MEMTEST_START        0x00000000
 105 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
 106
 107 #define CONFIG_SYS_CCSRBAR              0xffe00000
 108 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 109
 110 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 111        SPL code*/
 112 #ifdef CONFIG_SPL_BUILD
 113 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 114 #endif
 115
 116
 117 /* DDR Setup */
 118 #define CONFIG_DDR_SPD
 119 #define CONFIG_VERY_BIG_RAM
 120 #define CONFIG_FSL_DDR3
 121
 122 #ifdef CONFIG_DDR_ECC
 123 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 124 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 125 #endif
 126
 127 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 128 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 129
 130 #define CONFIG_NUM_DDR_CONTROLLERS      1
 131 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 132 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 133
 134 /* I2C addresses of SPD EEPROMs */
 135 #define CONFIG_SYS_SPD_BUS_NUM          1
 136 #define SPD_EEPROM_ADDRESS              0x51    /* CTLR 0 DIMM 0 */
 137
 138 /* These are used when DDR doesn't use SPD.  */
 139 #define CONFIG_SYS_SDRAM_SIZE           2048
 140 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 141 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 142 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
 143 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007F
 144 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014202
 145 #define CONFIG_SYS_DDR_TIMING_3         0x00010000
 146 #define CONFIG_SYS_DDR_TIMING_0         0x40110104
 147 #define CONFIG_SYS_DDR_TIMING_1         0x5c5bd746
 148 #define CONFIG_SYS_DDR_TIMING_2         0x0fa8d4ca
 149 #define CONFIG_SYS_DDR_MODE_1           0x00441221
 150 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 151 #define CONFIG_SYS_DDR_INTERVAL         0x0a280100
 152 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 153 #define CONFIG_SYS_DDR_CLK_CTRL         0x02800000
 154 #define CONFIG_SYS_DDR_CONTROL          0xc7000008
 155 #define CONFIG_SYS_DDR_CONTROL_2        0x24401041
 156 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 157 #define CONFIG_SYS_DDR_TIMING_5         0x02401400
 158 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 159 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8675f608
 160
 161
 162 /*
 163  * Memory map
 164  *
 165  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 166  * 0x8000_0000  0xdfff_ffff     PCI Express Mem         1.5G non-cacheable
 167  * 0xffc0_0000  0xffc2_ffff     PCI IO range            192K non-cacheable
 168  *
 169  * Localbus cacheable (TBD)
 170  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 171  *
 172  * Localbus non-cacheable
 173  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 174  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 175  * 0xff80_0000  0xff80_7fff     NAND                    32K non-cacheable
 176  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 177  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 178  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 179  */
 180
 181 /*
 182  * Local Bus Definitions
 183  */
 184 #define CONFIG_SYS_FLASH_BASE           0xe8000000 /* start of FLASH 128M */
 185 #ifdef CONFIG_PHYS_64BIT
 186 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe8000000ull
 187 #else
 188 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 189 #endif
 190
 191 #define CONFIG_FLASH_BR_PRELIM  \
 192         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 193 #define CONFIG_FLASH_OR_PRELIM  (OR_AM_128MB | 0xff7)
 194
 195 #ifdef CONFIG_NAND
 196 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 197 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 198 #else
 199 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 200 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 201 #endif
 202
 203 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 204 #define CONFIG_SYS_FLASH_QUIET_TEST
 205 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 206
 207 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 208 #define CONFIG_SYS_MAX_FLASH_SECT       1024
 209
 210 #ifndef CONFIG_SYS_MONITOR_BASE
 211 #ifdef CONFIG_SPL_BUILD
 212 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 213 #else
 214 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 215 #endif
 216 #endif
 217
 218 #define CONFIG_FLASH_CFI_DRIVER
 219 #define CONFIG_SYS_FLASH_CFI
 220 #define CONFIG_SYS_FLASH_EMPTY_INFO
 221
 222 /* Nand Flash */
 223 #if defined(CONFIG_NAND_FSL_ELBC)
 224 #define CONFIG_SYS_NAND_BASE            0xff800000
 225 #ifdef CONFIG_PHYS_64BIT
 226 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 227 #else
 228 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 229 #endif
 230
 231 #define CONFIG_SYS_NAND_BASE_LIST     { CONFIG_SYS_NAND_BASE, }
 232 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 233 #define CONFIG_MTD_NAND_VERIFY_WRITE
 234 #define CONFIG_CMD_NAND                 1
 235 #define CONFIG_SYS_NAND_BLOCK_SIZE    (256 * 1024)
 236 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
 237
 238 /* NAND flash config */
 239 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 240                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 241                                | BR_PS_8               /* Port Size = 8 bit */ \
 242                                | BR_MS_FCM             /* MSEL = FCM */ \
 243                                | BR_V)                 /* valid */
 244 #define CONFIG_SYS_NAND_OR_PRELIM  (OR_AM_32KB         /* length 256K */ \
 245                                | OR_FCM_PGS            /* Large Page*/ \
 246                                | OR_FCM_CSCT \
 247                                | OR_FCM_CST \
 248                                | OR_FCM_CHT \
 249                                | OR_FCM_SCY_1 \
 250                                | OR_FCM_TRLX \
 251                                | OR_FCM_EHTR)
 252 #ifdef CONFIG_NAND
 253 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 254 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 255 #else
 256 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 257 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 258 #endif
 259
 260 #endif /* CONFIG_NAND_FSL_ELBC */
 261
 262 #define CONFIG_BOARD_EARLY_INIT_F
 263 #define CONFIG_BOARD_EARLY_INIT_R
 264 #define CONFIG_MISC_INIT_R
 265 #define CONFIG_HWCONFIG
 266
 267 #define CONFIG_FSL_NGPIXIS
 268 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 269 #ifdef CONFIG_PHYS_64BIT
 270 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 271 #else
 272 #define PIXIS_BASE_PHYS         PIXIS_BASE
 273 #endif
 274
 275 #define CONFIG_SYS_BR2_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 276 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_32KB | 0x6ff7)
 277
 278 #define PIXIS_LBMAP_SWITCH      7
 279 #define PIXIS_LBMAP_MASK        0xF0
 280 #define PIXIS_LBMAP_ALTBANK     0x20
 281 #define PIXIS_SPD               0x07
 282 #define PIXIS_SPD_SYSCLK_MASK   0x07
 283 #define PIXIS_ELBC_SPI_MASK     0xc0
 284 #define PIXIS_SPI               0x80
 285
 286 #define CONFIG_SYS_INIT_RAM_LOCK
 287 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* Initial L1 address */
 288 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000 /* Size of used area in RAM */
 289
 290 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 291         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 292 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 293
 294 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 295 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 296
 297 /*
 298  * Serial Port
 299  */
 300 #define CONFIG_CONS_INDEX               1
 301 #define CONFIG_SYS_NS16550
 302 #define CONFIG_SYS_NS16550_SERIAL
 303 #define CONFIG_SYS_NS16550_REG_SIZE     1
 304 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 305 #ifdef CONFIG_SPL_BUILD
 306 #define CONFIG_NS16550_MIN_FUNCTIONS
 307 #endif
 308
 309 #define CONFIG_SYS_BAUDRATE_TABLE       \
 310         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 311
 312 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 313 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 314
 315 /* Use the HUSH parser */
 316 #define CONFIG_SYS_HUSH_PARSER
 317
 318 /* Video */
 319
 320 #ifdef CONFIG_FSL_DIU_FB
 321 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x10000)
 322 #define CONFIG_VIDEO
 323 #define CONFIG_CMD_BMP
 324 #define CONFIG_CFB_CONSOLE
 325 #define CONFIG_VIDEO_SW_CURSOR
 326 #define CONFIG_VGA_AS_SINGLE_DEVICE
 327 #define CONFIG_VIDEO_LOGO
 328 #define CONFIG_VIDEO_BMP_LOGO
 329 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 330 /*
 331  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 332  * disable empty flash sector detection, which is I/O-intensive.
 333  */
 334 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 335 #endif
 336
 337 #ifndef CONFIG_FSL_DIU_FB
 338 #endif
 339
 340 #ifdef CONFIG_ATI
 341 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 342 #define CONFIG_VIDEO
 343 #define CONFIG_BIOSEMU
 344 #define CONFIG_VIDEO_SW_CURSOR
 345 #define CONFIG_ATI_RADEON_FB
 346 #define CONFIG_VIDEO_LOGO
 347 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 348 #define CONFIG_CFB_CONSOLE
 349 #define CONFIG_VGA_AS_SINGLE_DEVICE
 350 #endif
 351
 352 /*
 353  * Pass open firmware flat tree
 354  */
 355 #define CONFIG_OF_LIBFDT
 356 #define CONFIG_OF_BOARD_SETUP
 357 #define CONFIG_OF_STDOUT_VIA_ALIAS
 358
 359 /* new uImage format support */
 360 #define CONFIG_FIT
 361 #define CONFIG_FIT_VERBOSE
 362
 363 /* I2C */
 364 #define CONFIG_FSL_I2C
 365 #define CONFIG_HARD_I2C
 366 #define CONFIG_I2C_MULTI_BUS
 367 #define CONFIG_SYS_I2C_SPEED            400000
 368 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 369 #define CONFIG_SYS_I2C_SLAVE            0x7F
 370 #define CONFIG_SYS_I2C_NOPROBES         {{0, 0x29}}
 371 #define CONFIG_SYS_I2C_OFFSET           0x3000
 372 #define CONFIG_SYS_I2C2_OFFSET          0x3100
 373
 374 /*
 375  * I2C2 EEPROM
 376  */
 377 #define CONFIG_ID_EEPROM
 378 #define CONFIG_SYS_I2C_EEPROM_NXID
 379 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 380 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 381 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 382
 383 /*
 384  * eSPI - Enhanced SPI
 385  */
 386 #define CONFIG_SPI_FLASH
 387 #define CONFIG_SPI_FLASH_SPANSION
 388
 389 #define CONFIG_HARD_SPI
 390 #define CONFIG_FSL_ESPI
 391
 392 #define CONFIG_CMD_SF
 393 #define CONFIG_SF_DEFAULT_SPEED         10000000
 394 #define CONFIG_SF_DEFAULT_MODE          0
 395
 396 /*
 397  * General PCI
 398  * Memory space is mapped 1-1, but I/O space must start from 0.
 399  */
 400
 401 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 402 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 403 #ifdef CONFIG_PHYS_64BIT
 404 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 405 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 406 #else
 407 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 408 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 409 #endif
 410 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 411 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 412 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 413 #ifdef CONFIG_PHYS_64BIT
 414 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 415 #else
 416 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 417 #endif
 418 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 419
 420 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 421 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 422 #ifdef CONFIG_PHYS_64BIT
 423 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 424 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 425 #else
 426 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 427 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 428 #endif
 429 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 430 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 431 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 432 #ifdef CONFIG_PHYS_64BIT
 433 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 434 #else
 435 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 436 #endif
 437 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 438
 439 /* controller 3, Slot 1, tgtid 3, Base address b000 */
 440 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 441 #ifdef CONFIG_PHYS_64BIT
 442 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 443 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 444 #else
 445 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 446 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 447 #endif
 448 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 449 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 450 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 451 #ifdef CONFIG_PHYS_64BIT
 452 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 453 #else
 454 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 455 #endif
 456 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 457
 458 #ifdef CONFIG_PCI
 459 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 460 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 461 #define CONFIG_E1000                    /* Define e1000 pci Ethernet card */
 462 #endif
 463
 464 /* SATA */
 465 #define CONFIG_LIBATA
 466 #define CONFIG_FSL_SATA
 467 #define CONFIG_FSL_SATA_V2
 468
 469 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 470 #define CONFIG_SATA1
 471 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 472 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 473 #define CONFIG_SATA2
 474 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 475 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 476
 477 #ifdef CONFIG_FSL_SATA
 478 #define CONFIG_LBA48
 479 #define CONFIG_CMD_SATA
 480 #define CONFIG_DOS_PARTITION
 481 #define CONFIG_CMD_EXT2
 482 #endif
 483
 484 #define CONFIG_MMC
 485 #ifdef CONFIG_MMC
 486 #define CONFIG_CMD_MMC
 487 #define CONFIG_FSL_ESDHC
 488 #define CONFIG_GENERIC_MMC
 489 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 490 #endif
 491
 492 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 493 #define CONFIG_CMD_EXT2
 494 #define CONFIG_CMD_FAT
 495 #define CONFIG_DOS_PARTITION
 496 #endif
 497
 498 #define CONFIG_TSEC_ENET
 499 #ifdef CONFIG_TSEC_ENET
 500
 501 #define CONFIG_TSECV2
 502
 503 #define CONFIG_MII                      /* MII PHY management */
 504 #define CONFIG_TSEC1            1
 505 #define CONFIG_TSEC1_NAME       "eTSEC1"
 506 #define CONFIG_TSEC2            1
 507 #define CONFIG_TSEC2_NAME       "eTSEC2"
 508
 509 #define TSEC1_PHY_ADDR          1
 510 #define TSEC2_PHY_ADDR          2
 511
 512 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 513 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 514
 515 #define TSEC1_PHYIDX            0
 516 #define TSEC2_PHYIDX            0
 517
 518 #define CONFIG_ETHPRIME         "eTSEC1"
 519
 520 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 521 #endif
 522
 523 /*
 524  * Environment
 525  */
 526 #ifdef CONFIG_RAMBOOT_SPIFLASH
 527 #define CONFIG_ENV_IS_IN_SPI_FLASH
 528 #define CONFIG_ENV_SPI_BUS      0
 529 #define CONFIG_ENV_SPI_CS       0
 530 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 531 #define CONFIG_ENV_SPI_MODE     0
 532 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 533 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 534 #define CONFIG_ENV_SECT_SIZE    0x10000
 535 #elif defined(CONFIG_RAMBOOT_SDCARD)
 536 #define CONFIG_ENV_IS_IN_MMC
 537 #define CONFIG_ENV_SIZE         0x2000
 538 #define CONFIG_SYS_MMC_ENV_DEV  0
 539 #elif defined(CONFIG_NAND)
 540 #define CONFIG_ENV_IS_IN_NAND
 541 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 542 #define CONFIG_ENV_OFFSET       ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 543 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 544 #elif defined(CONFIG_SYS_RAMBOOT)
 545 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 546 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 547 #define CONFIG_ENV_SIZE         0x2000
 548 #else
 549 #define CONFIG_ENV_IS_IN_FLASH
 550 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
 551 #define CONFIG_ENV_ADDR 0xfff80000
 552 #else
 553 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 554 #endif
 555 #define CONFIG_ENV_SIZE         0x2000
 556 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 557 #endif
 558
 559 #define CONFIG_LOADS_ECHO
 560 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 561
 562 /*
 563  * Command line configuration.
 564  */
 565 #include <config_cmd_default.h>
 566
 567 #define CONFIG_CMD_ELF
 568 #define CONFIG_CMD_ERRATA
 569 #define CONFIG_CMD_IRQ
 570 #define CONFIG_CMD_I2C
 571 #define CONFIG_CMD_MII
 572 #define CONFIG_CMD_PING
 573 #define CONFIG_CMD_SETEXPR
 574 #define CONFIG_CMD_REGINFO
 575
 576 #ifdef CONFIG_PCI
 577 #define CONFIG_CMD_PCI
 578 #define CONFIG_CMD_NET
 579 #endif
 580
 581 /*
 582  * USB
 583  */
 584 #define CONFIG_HAS_FSL_DR_USB
 585 #ifdef CONFIG_HAS_FSL_DR_USB
 586 #define CONFIG_USB_EHCI
 587
 588 #ifdef CONFIG_USB_EHCI
 589 #define CONFIG_CMD_USB
 590 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 591 #define CONFIG_USB_EHCI_FSL
 592 #define CONFIG_USB_STORAGE
 593 #define CONFIG_CMD_FAT
 594 #endif
 595 #endif
 596
 597 /*
 598  * Miscellaneous configurable options
 599  */
 600 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 601 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 602 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 603 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 604 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 605 #ifdef CONFIG_CMD_KGDB
 606 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 607 #else
 608 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 609 #endif
 610 /* Print Buffer Size */
 611 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 612 #define CONFIG_SYS_MAXARGS      16
 613 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 614 #define CONFIG_SYS_HZ           1000
 615
 616 /*
 617  * For booting Linux, the board info and command line data
 618  * have to be in the first 64 MB of memory, since this is
 619  * the maximum mapped by the Linux kernel during initialization.
 620  */
 621 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 622 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 623
 624 #ifdef CONFIG_CMD_KGDB
 625 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 626 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 627 #endif
 628
 629 /*
 630  * Environment Configuration
 631  */
 632
 633 #define CONFIG_HOSTNAME         p1022ds
 634 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 635 #define CONFIG_BOOTFILE         "uImage"
 636 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 637
 638 #define CONFIG_LOADADDR         1000000
 639
 640 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 641
 642 #define CONFIG_BAUDRATE 115200
 643
 644 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 645         "netdev=eth0\0"                                         \
 646         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 647         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 648         "tftpflash=tftpboot $loadaddr $uboot && "               \
 649                 "protect off $ubootaddr +$filesize && "         \
 650                 "erase $ubootaddr +$filesize && "               \
 651                 "cp.b $loadaddr $ubootaddr $filesize && "       \
 652                 "protect on $ubootaddr +$filesize && "          \
 653                 "cmp.b $loadaddr $ubootaddr $filesize\0"        \
 654         "consoledev=ttyS0\0"                                    \
 655         "ramdiskaddr=2000000\0"                                 \
 656         "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
 657         "fdtaddr=c00000\0"                                      \
 658         "fdtfile=p1022ds.dtb\0"                                 \
 659         "bdev=sda3\0"                                           \
 660         "hwconfig=esdhc;audclk:12\0"
 661
 662 #define CONFIG_HDBOOT                                   \
 663         "setenv bootargs root=/dev/$bdev rw "           \
 664         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 665         "tftp $loadaddr $bootfile;"                     \
 666         "tftp $fdtaddr $fdtfile;"                       \
 667         "bootm $loadaddr - $fdtaddr"
 668
 669 #define CONFIG_NFSBOOTCOMMAND                                           \
 670         "setenv bootargs root=/dev/nfs rw "                             \
 671         "nfsroot=$serverip:$rootpath "                                  \
 672         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 673         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 674         "tftp $loadaddr $bootfile;"                                     \
 675         "tftp $fdtaddr $fdtfile;"                                       \
 676         "bootm $loadaddr - $fdtaddr"
 677
 678 #define CONFIG_RAMBOOTCOMMAND                                           \
 679         "setenv bootargs root=/dev/ram rw "                             \
 680         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 681         "tftp $ramdiskaddr $ramdiskfile;"                               \
 682         "tftp $loadaddr $bootfile;"                                     \
 683         "tftp $fdtaddr $fdtfile;"                                       \
 684         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 685
 686 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 687
 688 #endif