include/configs/P2041RDB.h

   1 /*
   2  * Copyright 2011 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 /*
  24  * P2041 RDB board configuration file
  25  *
  26  */
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 #define CONFIG_P2041RDB
  31 #define CONFIG_PHYS_64BIT
  32 #define CONFIG_PPC_P2041
  33
  34 #ifdef CONFIG_RAMBOOT_PBL
  35 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  36 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  37 #endif
  38
  39 /* High Level Configuration Options */
  40 #define CONFIG_BOOKE
  41 #define CONFIG_E500                     /* BOOKE e500 family */
  42 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  43 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  44 #define CONFIG_MPC85xx                  /* MPC85xx/PQ3 platform */
  45 #define CONFIG_FSL_CORENET              /* Freescale CoreNet platform */
  46 #define CONFIG_MP                       /* support multiple processors */
  47
  48 #ifndef CONFIG_SYS_TEXT_BASE
  49 #define CONFIG_SYS_TEXT_BASE    0xeff80000
  50 #endif
  51
  52 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  53 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  54 #endif
  55
  56 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  57 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  58 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
  59 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  60 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  61 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  62 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  63 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  64 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  65
  66 #define CONFIG_SYS_SRIO
  67 #define CONFIG_SRIO1                    /* SRIO port 1 */
  68 #define CONFIG_SRIO2                    /* SRIO port 2 */
  69 #define CONFIG_SYS_DPAA_RMAN            /* RMan */
  70
  71 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  72
  73 #define CONFIG_ENV_OVERWRITE
  74
  75 #ifdef CONFIG_SYS_NO_FLASH
  76 #define CONFIG_ENV_IS_NOWHERE
  77 #else
  78 #define CONFIG_FLASH_CFI_DRIVER
  79 #define CONFIG_SYS_FLASH_CFI
  80 #endif
  81
  82 #if defined(CONFIG_SPIFLASH)
  83         #define CONFIG_SYS_EXTRA_ENV_RELOC
  84         #define CONFIG_ENV_IS_IN_SPI_FLASH
  85         #define CONFIG_ENV_SPI_BUS              0
  86         #define CONFIG_ENV_SPI_CS               0
  87         #define CONFIG_ENV_SPI_MAX_HZ           10000000
  88         #define CONFIG_ENV_SPI_MODE             0
  89         #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  90         #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  91         #define CONFIG_ENV_SECT_SIZE            0x10000
  92 #elif defined(CONFIG_SDCARD)
  93         #define CONFIG_SYS_EXTRA_ENV_RELOC
  94         #define CONFIG_ENV_IS_IN_MMC
  95         #define CONFIG_FSL_FIXED_MMC_LOCATION
  96         #define CONFIG_SYS_MMC_ENV_DEV          0
  97         #define CONFIG_ENV_SIZE                 0x2000
  98         #define CONFIG_ENV_OFFSET               (512 * 1097)
  99 #else
 100         #define CONFIG_ENV_IS_IN_FLASH
 101         #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE \
 102                         - CONFIG_ENV_SECT_SIZE)
 103         #define CONFIG_ENV_SIZE         0x2000
 104         #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 105 #endif
 106
 107 #ifndef __ASSEMBLY__
 108 unsigned long get_board_sys_clk(unsigned long dummy);
 109 #endif
 110 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0)
 111
 112 /*
 113  * These can be toggled for performance analysis, otherwise use default.
 114  */
 115 #define CONFIG_SYS_CACHE_STASHING
 116 #define CONFIG_BACKSIDE_L2_CACHE
 117 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 118 #define CONFIG_BTB                      /* toggle branch predition */
 119
 120 #define CONFIG_ENABLE_36BIT_PHYS
 121
 122 #ifdef CONFIG_PHYS_64BIT
 123 #define CONFIG_ADDR_MAP
 124 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 125 #endif
 126
 127 #define CONFIG_POST CONFIG_SYS_POST_MEMORY      /* test POST memory test */
 128 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 129 #define CONFIG_SYS_MEMTEST_END          0x00400000
 130 #define CONFIG_SYS_ALT_MEMTEST
 131 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 132
 133 /*
 134  *  Config the L3 Cache as L3 SRAM
 135  */
 136 #define CONFIG_SYS_INIT_L3_ADDR         CONFIG_RAMBOOT_TEXT_BASE
 137 #ifdef CONFIG_PHYS_64BIT
 138 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    (0xf00000000ull | \
 139                 CONFIG_RAMBOOT_TEXT_BASE)
 140 #else
 141 #define CONFIG_SYS_INIT_L3_ADDR_PHYS    CONFIG_SYS_INIT_L3_ADDR
 142 #endif
 143 #define CONFIG_SYS_L3_SIZE              (1024 << 10)
 144 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE)
 145
 146 #ifdef CONFIG_PHYS_64BIT
 147 #define CONFIG_SYS_DCSRBAR              0xf0000000
 148 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 149 #endif
 150
 151 /* EEPROM */
 152 #define CONFIG_ID_EEPROM
 153 #define CONFIG_SYS_I2C_EEPROM_NXID
 154 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 155 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 156 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 157
 158 /*
 159  * DDR Setup
 160  */
 161 #define CONFIG_VERY_BIG_RAM
 162 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 163 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 164
 165 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 166 #define CONFIG_CHIP_SELECTS_PER_CTRL    (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
 167
 168 #define CONFIG_DDR_SPD
 169 #define CONFIG_FSL_DDR3
 170
 171 #define CONFIG_SYS_SPD_BUS_NUM  0
 172 #define SPD_EEPROM_ADDRESS      0x52
 173 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 174
 175 /*
 176  * Local Bus Definitions
 177  */
 178
 179 /* Set the local bus clock 1/8 of platform clock */
 180 #define CONFIG_SYS_LBC_LCRR             LCRR_CLKDIV_8
 181
 182 #define CONFIG_SYS_FLASH_BASE           0xe8000000      /* Start of PromJet */
 183 #ifdef CONFIG_PHYS_64BIT
 184 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe8000000ull
 185 #else
 186 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 187 #endif
 188
 189 #define CONFIG_SYS_FLASH_BR_PRELIM \
 190                 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 191 #define CONFIG_SYS_FLASH_OR_PRELIM \
 192                 ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
 193                  | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
 194
 195 #define CONFIG_FSL_CPLD
 196 #define CPLD_BASE               0xffdf0000      /* CPLD registers */
 197 #ifdef CONFIG_PHYS_64BIT
 198 #define CPLD_BASE_PHYS          0xfffdf0000ull
 199 #else
 200 #define CPLD_BASE_PHYS          CPLD_BASE
 201 #endif
 202
 203 #define CONFIG_SYS_BR3_PRELIM   (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V)
 204 #define CONFIG_SYS_OR3_PRELIM   0xffffeff7      /* 32KB but only 4k mapped */
 205
 206 #define PIXIS_LBMAP_SWITCH      7
 207 #define PIXIS_LBMAP_MASK        0xf0
 208 #define PIXIS_LBMAP_SHIFT       4
 209 #define PIXIS_LBMAP_ALTBANK     0x40
 210
 211 #define CONFIG_SYS_FLASH_QUIET_TEST
 212 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 213
 214 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* number of banks */
 215 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 216 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Erase Timeout (ms) */
 217 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Write Timeout (ms) */
 218
 219 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 220
 221 #if defined(CONFIG_RAMBOOT_PBL)
 222 #define CONFIG_SYS_RAMBOOT
 223 #endif
 224
 225 #define CONFIG_NAND_FSL_ELBC
 226 /* Nand Flash */
 227 #ifdef CONFIG_NAND_FSL_ELBC
 228 #define CONFIG_SYS_NAND_BASE            0xffa00000
 229 #ifdef CONFIG_PHYS_64BIT
 230 #define CONFIG_SYS_NAND_BASE_PHYS       0xfffa00000ull
 231 #else
 232 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 233 #endif
 234
 235 #define CONFIG_SYS_NAND_BASE_LIST     {CONFIG_SYS_NAND_BASE}
 236 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 237 #define CONFIG_MTD_NAND_VERIFY_WRITE
 238 #define CONFIG_CMD_NAND
 239 #define CONFIG_SYS_NAND_BLOCK_SIZE    (128 * 1024)
 240
 241 /* NAND flash config */
 242 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 243                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 244                                | BR_PS_8               /* Port Size = 8 bit */ \
 245                                | BR_MS_FCM             /* MSEL = FCM */ \
 246                                | BR_V)                 /* valid */
 247 #define CONFIG_SYS_NAND_OR_PRELIM  (0xFFFC0000        /* length 256K */ \
 248                                | OR_FCM_PGS            /* Large Page*/ \
 249                                | OR_FCM_CSCT \
 250                                | OR_FCM_CST \
 251                                | OR_FCM_CHT \
 252                                | OR_FCM_SCY_1 \
 253                                | OR_FCM_TRLX \
 254                                | OR_FCM_EHTR)
 255
 256 #ifdef CONFIG_NAND
 257 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 258 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 259 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 260 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 261 #else
 262 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 263 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 264 #define CONFIG_SYS_BR1_PRELIM  CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 265 #define CONFIG_SYS_OR1_PRELIM  CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 266 #endif
 267 #else
 268 #define CONFIG_SYS_BR0_PRELIM  CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */
 269 #define CONFIG_SYS_OR0_PRELIM  CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */
 270 #endif /* CONFIG_NAND_FSL_ELBC */
 271
 272 #define CONFIG_SYS_FLASH_EMPTY_INFO
 273 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
 274 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 275
 276 #define CONFIG_BOARD_EARLY_INIT_F
 277 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 278 #define CONFIG_MISC_INIT_R
 279
 280 #define CONFIG_HWCONFIG
 281
 282 /* define to use L1 as initial stack */
 283 #define CONFIG_L1_INIT_RAM
 284 #define CONFIG_SYS_INIT_RAM_LOCK
 285 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000      /* Initial L1 address */
 286 #ifdef CONFIG_PHYS_64BIT
 287 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 288 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 289 /* The assembler doesn't like typecast */
 290 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 291         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 292           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 293 #else
 294 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 295 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 296 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 297 #endif
 298 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 299
 300 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 301                                         GENERATED_GBL_DATA_SIZE)
 302 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 303
 304 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 305 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)
 306
 307 /* Serial Port - controlled on board with jumper J8
 308  * open - index 2
 309  * shorted - index 1
 310  */
 311 #define CONFIG_CONS_INDEX       1
 312 #define CONFIG_SYS_NS16550
 313 #define CONFIG_SYS_NS16550_SERIAL
 314 #define CONFIG_SYS_NS16550_REG_SIZE     1
 315 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 316
 317 #define CONFIG_SYS_BAUDRATE_TABLE       \
 318         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 319
 320 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 321 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 322 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 323 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 324
 325 /* Use the HUSH parser */
 326 #define CONFIG_SYS_HUSH_PARSER
 327 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 328
 329 /* pass open firmware flat tree */
 330 #define CONFIG_OF_LIBFDT
 331 #define CONFIG_OF_BOARD_SETUP
 332 #define CONFIG_OF_STDOUT_VIA_ALIAS
 333
 334 /* new uImage format support */
 335 #define CONFIG_FIT
 336 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 337
 338 /* I2C */
 339 #define CONFIG_FSL_I2C          /* Use FSL common I2C driver */
 340 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 341 #define CONFIG_I2C_MULTI_BUS
 342 #define CONFIG_I2C_CMD_TREE
 343 #define CONFIG_SYS_I2C_SPEED            400000
 344 #define CONFIG_SYS_I2C_SLAVE            0x7F
 345 #define CONFIG_SYS_I2C_OFFSET           0x118000
 346 #define CONFIG_SYS_I2C2_OFFSET          0x118100
 347
 348 /*
 349  * RapidIO
 350  */
 351 #define CONFIG_SYS_SRIO1_MEM_VIRT       0xa0000000
 352 #ifdef CONFIG_PHYS_64BIT
 353 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xc20000000ull
 354 #else
 355 #define CONFIG_SYS_SRIO1_MEM_PHYS       0xa0000000
 356 #endif
 357 #define CONFIG_SYS_SRIO1_MEM_SIZE       0x10000000      /* 256M */
 358
 359 #define CONFIG_SYS_SRIO2_MEM_VIRT       0xb0000000
 360 #ifdef CONFIG_PHYS_64BIT
 361 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xc30000000ull
 362 #else
 363 #define CONFIG_SYS_SRIO2_MEM_PHYS       0xb0000000
 364 #endif
 365 #define CONFIG_SYS_SRIO2_MEM_SIZE       0x10000000      /* 256M */
 366
 367 /*
 368  * eSPI - Enhanced SPI
 369  */
 370 #define CONFIG_FSL_ESPI
 371 #define CONFIG_SPI_FLASH
 372 #define CONFIG_SPI_FLASH_SPANSION
 373 #define CONFIG_CMD_SF
 374 #define CONFIG_SF_DEFAULT_SPEED         10000000
 375 #define CONFIG_SF_DEFAULT_MODE          0
 376
 377 /*
 378  * General PCI
 379  * Memory space is mapped 1-1, but I/O space must start from 0.
 380  */
 381
 382 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 383 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 384 #ifdef CONFIG_PHYS_64BIT
 385 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 386 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 387 #else
 388 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 389 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 390 #endif
 391 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 392 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 393 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 394 #ifdef CONFIG_PHYS_64BIT
 395 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 396 #else
 397 #define CONFIG_SYS_PCIE1_IO_PHYS        0xf8000000
 398 #endif
 399 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 400
 401 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 402 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 403 #ifdef CONFIG_PHYS_64BIT
 404 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 405 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 406 #else
 407 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 408 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 409 #endif
 410 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 411 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 412 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 413 #ifdef CONFIG_PHYS_64BIT
 414 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 415 #else
 416 #define CONFIG_SYS_PCIE2_IO_PHYS        0xf8010000
 417 #endif
 418 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 419
 420 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 421 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xc0000000
 422 #ifdef CONFIG_PHYS_64BIT
 423 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 424 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc40000000ull
 425 #else
 426 #define CONFIG_SYS_PCIE3_MEM_BUS        0xc0000000
 427 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc0000000
 428 #endif
 429 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 430 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 431 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 432 #ifdef CONFIG_PHYS_64BIT
 433 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 434 #else
 435 #define CONFIG_SYS_PCIE3_IO_PHYS        0xf8020000
 436 #endif
 437 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 438
 439 /* Qman/Bman */
 440 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 441 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 442 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 443 #ifdef CONFIG_PHYS_64BIT
 444 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 445 #else
 446 #define CONFIG_SYS_BMAN_MEM_PHYS        CONFIG_SYS_BMAN_MEM_BASE
 447 #endif
 448 #define CONFIG_SYS_BMAN_MEM_SIZE        0x00200000
 449 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 450 #define CONFIG_SYS_QMAN_MEM_BASE        0xf4200000
 451 #ifdef CONFIG_PHYS_64BIT
 452 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff4200000ull
 453 #else
 454 #define CONFIG_SYS_QMAN_MEM_PHYS        CONFIG_SYS_QMAN_MEM_BASE
 455 #endif
 456 #define CONFIG_SYS_QMAN_MEM_SIZE        0x00200000
 457
 458 #define CONFIG_SYS_DPAA_FMAN
 459 #define CONFIG_SYS_DPAA_PME
 460 /* Default address of microcode for the Linux Fman driver */
 461 #if defined(CONFIG_SPIFLASH)
 462 /*
 463  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 464  * env, so we got 0x110000.
 465  */
 466 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 467 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0x110000
 468 #elif defined(CONFIG_SDCARD)
 469 /*
 470  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 471  * about 545KB (1089 blocks), Env is stored after the image, and the env size is
 472  * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
 473  */
 474 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 475 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (512 * 1130)
 476 #elif defined(CONFIG_NAND)
 477 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 478 #define CONFIG_SYS_QE_FMAN_FW_ADDR      (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
 479 #else
 480 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 481 #define CONFIG_SYS_QE_FMAN_FW_ADDR      0xEF000000
 482 #endif
 483 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 484 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 485
 486 #ifdef CONFIG_SYS_DPAA_FMAN
 487 #define CONFIG_FMAN_ENET
 488 #define CONFIG_PHYLIB_10G
 489 #define CONFIG_PHY_VITESSE
 490 #define CONFIG_PHY_TERANETICS
 491 #endif
 492
 493 #ifdef CONFIG_PCI
 494 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 495 #define CONFIG_E1000
 496
 497 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 498 #define CONFIG_DOS_PARTITION
 499 #endif  /* CONFIG_PCI */
 500
 501 /* SATA */
 502 #define CONFIG_FSL_SATA
 503 #ifdef CONFIG_FSL_SATA
 504 #define CONFIG_LIBATA
 505
 506 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 507 #define CONFIG_SATA1
 508 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 509 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 510 #define CONFIG_SATA2
 511 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 512 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 513
 514 #define CONFIG_LBA48
 515 #define CONFIG_CMD_SATA
 516 #define CONFIG_DOS_PARTITION
 517 #define CONFIG_CMD_EXT2
 518 #endif
 519
 520 #ifdef CONFIG_FMAN_ENET
 521 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR  0x2
 522 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR  0x3
 523 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR  0x4
 524 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x1
 525 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x0
 526
 527 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 528 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 529 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 530 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 531
 532 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR  0
 533
 534 #define CONFIG_SYS_TBIPA_VALUE  8
 535 #define CONFIG_MII              /* MII PHY management */
 536 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 537 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 538 #endif
 539
 540 /*
 541  * Environment
 542  */
 543 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 544 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 545
 546 /*
 547  * Command line configuration.
 548  */
 549 #include <config_cmd_default.h>
 550
 551 #define CONFIG_CMD_DHCP
 552 #define CONFIG_CMD_ELF
 553 #define CONFIG_CMD_ERRATA
 554 #define CONFIG_CMD_GREPENV
 555 #define CONFIG_CMD_IRQ
 556 #define CONFIG_CMD_I2C
 557 #define CONFIG_CMD_MII
 558 #define CONFIG_CMD_PING
 559 #define CONFIG_CMD_SETEXPR
 560
 561 #ifdef CONFIG_PCI
 562 #define CONFIG_CMD_PCI
 563 #define CONFIG_CMD_NET
 564 #endif
 565
 566 /*
 567 * USB
 568 */
 569 #define CONFIG_CMD_USB
 570 #define CONFIG_USB_STORAGE
 571 #define CONFIG_USB_EHCI
 572 #define CONFIG_USB_EHCI_FSL
 573 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 574 #define CONFIG_CMD_EXT2
 575
 576 #define CONFIG_MMC
 577
 578 #ifdef CONFIG_MMC
 579 #define CONFIG_FSL_ESDHC
 580 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 581 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
 582 #define CONFIG_CMD_MMC
 583 #define CONFIG_GENERIC_MMC
 584 #define CONFIG_CMD_EXT2
 585 #define CONFIG_CMD_FAT
 586 #define CONFIG_DOS_PARTITION
 587 #endif
 588
 589 /*
 590  * Miscellaneous configurable options
 591  */
 592 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 593 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 594 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 595 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 596 #define CONFIG_SYS_PROMPT       "=> "           /* Monitor Command Prompt */
 597 #ifdef CONFIG_CMD_KGDB
 598 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 599 #else
 600 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 601 #endif
 602 /* Print Buffer Size */
 603 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
 604                                 sizeof(CONFIG_SYS_PROMPT)+16)
 605 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 606 /* Boot Argument Buffer Size */
 607 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 608 #define CONFIG_SYS_HZ           1000            /* decrementer freq 1ms ticks */
 609
 610 /*
 611  * For booting Linux, the board info and command line data
 612  * have to be in the first 64 MB of memory, since this is
 613  * the maximum mapped by the Linux kernel during initialization.
 614  */
 615 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux */
 616 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 617
 618 #ifdef CONFIG_CMD_KGDB
 619 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 620 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 621 #endif
 622
 623 /*
 624  * Environment Configuration
 625  */
 626 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 627 #define CONFIG_BOOTFILE         "uImage"
 628 #define CONFIG_UBOOTPATH        u-boot.bin
 629
 630 /* default location for tftp and bootm */
 631 #define CONFIG_LOADADDR         1000000
 632
 633 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 634
 635 #define CONFIG_BAUDRATE 115200
 636
 637 #define __USB_PHY_TYPE  utmi
 638
 639 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 640         "hwconfig=fsl_ddr:ctlr_intlv=cacheline,"                \
 641         "bank_intlv=cs0_cs1\0"                                  \
 642         "netdev=eth0\0"                                         \
 643         "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                  \
 644         "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0"          \
 645         "tftpflash=tftpboot $loadaddr $uboot && "               \
 646         "protect off $ubootaddr +$filesize && "                 \
 647         "erase $ubootaddr +$filesize && "                       \
 648         "cp.b $loadaddr $ubootaddr $filesize && "               \
 649         "protect on $ubootaddr +$filesize && "                  \
 650         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 651         "consoledev=ttyS0\0"                                    \
 652         "usb_phy_type=" MK_STR(__USB_PHY_TYPE) "\0"             \
 653         "usb_dr_mode=host\0"                                    \
 654         "ramdiskaddr=2000000\0"                                 \
 655         "ramdiskfile=p2041rdb/ramdisk.uboot\0"                  \
 656         "fdtaddr=c00000\0"                                      \
 657         "fdtfile=p2041rdb/p2041rdb.dtb\0"                       \
 658         "bdev=sda3\0"                                           \
 659         "c=ffe\0"
 660
 661 #define CONFIG_HDBOOT                                   \
 662         "setenv bootargs root=/dev/$bdev rw "           \
 663         "console=$consoledev,$baudrate $othbootargs;"   \
 664         "tftp $loadaddr $bootfile;"                     \
 665         "tftp $fdtaddr $fdtfile;"                       \
 666         "bootm $loadaddr - $fdtaddr"
 667
 668 #define CONFIG_NFSBOOTCOMMAND                   \
 669         "setenv bootargs root=/dev/nfs rw "     \
 670         "nfsroot=$serverip:$rootpath "          \
 671         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 672         "console=$consoledev,$baudrate $othbootargs;"   \
 673         "tftp $loadaddr $bootfile;"             \
 674         "tftp $fdtaddr $fdtfile;"               \
 675         "bootm $loadaddr - $fdtaddr"
 676
 677 #define CONFIG_RAMBOOTCOMMAND                           \
 678         "setenv bootargs root=/dev/ram rw "             \
 679         "console=$consoledev,$baudrate $othbootargs;"   \
 680         "tftp $ramdiskaddr $ramdiskfile;"               \
 681         "tftp $loadaddr $bootfile;"                     \
 682         "tftp $fdtaddr $fdtfile;"                       \
 683         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 684
 685 #define CONFIG_BOOTCOMMAND              CONFIG_HDBOOT
 686
 687 #ifdef CONFIG_SECURE_BOOT
 688 #include <asm/fsl_secure_boot.h>
 689 #endif
 690
 691 #endif  /* __CONFIG_H */