]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/ap325rxa.h
Move defaults from config_cmd_default.h to Kconfig
[karo-tx-uboot.git] / include / configs / ap325rxa.h
1 /*
2  * Configuation settings for the Renesas Solutions AP-325RXA board
3  *
4  * Copyright (C) 2008 Renesas Solutions Corp.
5  * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 #ifndef __AP325RXA_H
11 #define __AP325RXA_H
12
13 #undef DEBUG
14 #define CONFIG_CPU_SH7723       1
15 #define CONFIG_AP325RXA 1
16
17 #define CONFIG_CMD_PING
18 #define CONFIG_CMD_SDRAM
19 #define CONFIG_CMD_IDE
20 #define CONFIG_CMD_EXT2
21 #define CONFIG_DOS_PARTITION
22
23 #define CONFIG_BAUDRATE         38400
24 #define CONFIG_BOOTDELAY        3
25 #define CONFIG_BOOTARGS         "console=ttySC2,38400"
26
27 #define CONFIG_VERSION_VARIABLE
28 #undef  CONFIG_SHOW_BOOT_PROGRESS
29
30 /* SMC9118 */
31 #define CONFIG_SMC911X 1
32 #define CONFIG_SMC911X_32_BIT 1
33 #define CONFIG_SMC911X_BASE 0xB6080000
34
35 /* MEMORY */
36 #define AP325RXA_SDRAM_BASE             (0x88000000)
37 #define AP325RXA_FLASH_BASE_1           (0xA0000000)
38 #define AP325RXA_FLASH_BANK_SIZE        (128 * 1024 * 1024)
39
40 #define CONFIG_SYS_TEXT_BASE    0x8FFC0000
41
42 /* undef to save memory */
43 #define CONFIG_SYS_LONGHELP
44 /* Monitor Command Prompt */
45 /* Buffer size for input from the Console */
46 #define CONFIG_SYS_CBSIZE               256
47 /* Buffer size for Console output */
48 #define CONFIG_SYS_PBSIZE               256
49 /* max args accepted for monitor commands */
50 #define CONFIG_SYS_MAXARGS              16
51 /* Buffer size for Boot Arguments passed to kernel */
52 #define CONFIG_SYS_BARGSIZE     512
53 /* List of legal baudrate settings for this board */
54 #define CONFIG_SYS_BAUDRATE_TABLE       { 38400 }
55
56 /* SCIF */
57 #define CONFIG_SCIF_CONSOLE 1
58 #define CONFIG_SCIF_A           1 /* SH7723 has SCIF and SCIFA */
59 #define CONFIG_CONS_SCIF5       1
60
61 /* Suppress display of console information at boot */
62 #undef  CONFIG_SYS_CONSOLE_INFO_QUIET
63 #undef  CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
64 #undef  CONFIG_SYS_CONSOLE_ENV_OVERWRITE
65
66 #define CONFIG_SYS_MEMTEST_START        (AP325RXA_SDRAM_BASE)
67 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
68
69 /* Enable alternate, more extensive, memory test */
70 #undef  CONFIG_SYS_ALT_MEMTEST
71 /* Scratch address used by the alternate memory test */
72 #undef  CONFIG_SYS_MEMTEST_SCRATCH
73
74 /* Enable temporary baudrate change while serial download */
75 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE
76
77 #define CONFIG_SYS_SDRAM_BASE   (AP325RXA_SDRAM_BASE)
78 /* maybe more, but if so u-boot doesn't know about it... */
79 #define CONFIG_SYS_SDRAM_SIZE   (128 * 1024 * 1024)
80 /* default load address for scripts ?!? */
81 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
82
83 /* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */
84 #define CONFIG_SYS_MONITOR_BASE (AP325RXA_FLASH_BASE_1)
85 /* Monitor size */
86 #define CONFIG_SYS_MONITOR_LEN  (128 * 1024)
87 /* Size of DRAM reserved for malloc() use */
88 #define CONFIG_SYS_MALLOC_LEN   (256 * 1024)
89 #define CONFIG_SYS_BOOTMAPSZ    (8 * 1024 * 1024)
90
91 /* FLASH */
92 #define CONFIG_FLASH_CFI_DRIVER 1
93 #define CONFIG_SYS_FLASH_CFI
94 #undef  CONFIG_SYS_FLASH_QUIET_TEST
95 /* print 'E' for empty sector on flinfo */
96 #define CONFIG_SYS_FLASH_EMPTY_INFO
97 /* Physical start address of Flash memory */
98 #define CONFIG_SYS_FLASH_BASE   (AP325RXA_FLASH_BASE_1)
99 /* Max number of sectors on each Flash chip */
100 #define CONFIG_SYS_MAX_FLASH_SECT       512
101
102 /*
103  * IDE support
104  */
105 #define CONFIG_IDE_RESET        1
106 #define CONFIG_SYS_PIO_MODE             1
107 #define CONFIG_SYS_IDE_MAXBUS           1       /* IDE bus */
108 #define CONFIG_SYS_IDE_MAXDEVICE        1
109 #define CONFIG_SYS_ATA_BASE_ADDR        0xB4180000
110 #define CONFIG_SYS_ATA_STRIDE           2       /* 1bit shift */
111 #define CONFIG_SYS_ATA_DATA_OFFSET      0x200   /* data reg offset */
112 #define CONFIG_SYS_ATA_REG_OFFSET       0x200   /* reg offset */
113 #define CONFIG_SYS_ATA_ALT_OFFSET       0x210   /* alternate register offset */
114 #define CONFIG_IDE_SWAP_IO
115
116 /* if you use all NOR Flash , you change dip-switch. Please see Manual. */
117 #define CONFIG_SYS_MAX_FLASH_BANKS      1
118 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)}
119
120 /* Timeout for Flash erase operations (in ms) */
121 #define CONFIG_SYS_FLASH_ERASE_TOUT     (3 * 1000)
122 /* Timeout for Flash write operations (in ms) */
123 #define CONFIG_SYS_FLASH_WRITE_TOUT     (3 * 1000)
124 /* Timeout for Flash set sector lock bit operations (in ms) */
125 #define CONFIG_SYS_FLASH_LOCK_TOUT      (3 * 1000)
126 /* Timeout for Flash clear lock bit operations (in ms) */
127 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    (3 * 1000)
128
129 /*
130  * Use hardware flash sectors protection instead
131  * of U-Boot software protection
132  */
133 #undef  CONFIG_SYS_FLASH_PROTECTION
134 #undef  CONFIG_SYS_DIRECT_FLASH_TFTP
135
136 /* ENV setting */
137 #define CONFIG_ENV_IS_IN_FLASH
138 #define CONFIG_ENV_OVERWRITE    1
139 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
140 #define CONFIG_ENV_SIZE         (CONFIG_ENV_SECT_SIZE)
141 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
142 /* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
143 #define CONFIG_ENV_OFFSET               (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
144 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SECT_SIZE)
145
146 /* Board Clock */
147 #define CONFIG_SYS_CLK_FREQ     33333333
148 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
149 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
150 #define CONFIG_SYS_TMU_CLK_DIV          (4)     /* 4 (default), 16, 64, 256 or 1024 */
151
152 #endif  /* __AP325RXA_H */