include/configs/cm_fx6.h

   1 /*
   2  * Config file for Compulab CM-FX6 board
   3  *
   4  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
   5  *
   6  * Author: Nikita Kiryanov <nikita@compulab.co.il>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_CM_FX6_H
  12 #define __CONFIG_CM_FX6_H
  13
  14 #include "mx6_common.h"
  15
  16 /* Machine config */
  17 #define CONFIG_SYS_LITTLE_ENDIAN
  18 #define CONFIG_MACH_TYPE                4273
  19
  20 /* CMD */
  21 #define CONFIG_CMD_GREPENV
  22 #undef CONFIG_CMD_LOADB
  23 #undef CONFIG_CMD_LOADS
  24 #undef CONFIG_CMD_XIMG
  25 #undef CONFIG_CMD_FPGA
  26
  27 /* MMC */
  28 #define CONFIG_MMC
  29 #define CONFIG_CMD_MMC
  30 #define CONFIG_GENERIC_MMC
  31 #define CONFIG_FSL_ESDHC
  32 #define CONFIG_FSL_USDHC
  33 #define CONFIG_SYS_FSL_USDHC_NUM        3
  34 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  35
  36 /* RAM */
  37 #define PHYS_SDRAM_1                    MMDC0_ARB_BASE_ADDR
  38 #define PHYS_SDRAM_2                    MMDC1_ARB_BASE_ADDR
  39 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  40 #define CONFIG_NR_DRAM_BANKS            2
  41 #define CONFIG_SYS_MEMTEST_START        0x10000000
  42 #define CONFIG_SYS_MEMTEST_END          0x10010000
  43 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  44 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  45 #define CONFIG_SYS_INIT_SP_OFFSET \
  46         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  47 #define CONFIG_SYS_INIT_SP_ADDR \
  48         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  49
  50 /* Serial console */
  51 #define CONFIG_MXC_UART
  52 #define CONFIG_MXC_UART_BASE            UART4_BASE
  53 #define CONFIG_BAUDRATE                 115200
  54 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
  55
  56 /* Shell */
  57 #define CONFIG_SYS_PROMPT       "CM-FX6 # "
  58 #define CONFIG_SYS_CBSIZE       1024
  59 #define CONFIG_SYS_MAXARGS      16
  60 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  61 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
  62                                         sizeof(CONFIG_SYS_PROMPT) + 16)
  63
  64 /* SPI flash */
  65 #define CONFIG_CMD_SF
  66 #define CONFIG_SF_DEFAULT_BUS           0
  67 #define CONFIG_SF_DEFAULT_CS            0
  68 #define CONFIG_SF_DEFAULT_SPEED         25000000
  69 #define CONFIG_SF_DEFAULT_MODE          (SPI_MODE_0)
  70
  71 /* Environment */
  72 #define CONFIG_ENV_OVERWRITE
  73 #define CONFIG_ENV_IS_IN_SPI_FLASH
  74 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
  75 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
  76 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
  77 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
  78 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
  79 #define CONFIG_ENV_SIZE                 (8 * 1024)
  80 #define CONFIG_ENV_OFFSET               (768 * 1024)
  81
  82 #define CONFIG_EXTRA_ENV_SETTINGS \
  83         "stdin=serial,usbkbd\0" \
  84         "stdout=serial,vga\0" \
  85         "stderr=serial,vga\0" \
  86         "panel=HDMI\0" \
  87         "autoload=no\0" \
  88         "kernel=uImage-cm-fx6\0" \
  89         "script=boot.scr\0" \
  90         "dtb=cm-fx6.dtb\0" \
  91         "bootm_low=18000000\0" \
  92         "loadaddr=0x10800000\0" \
  93         "fdtaddr=0x11000000\0" \
  94         "console=ttymxc3,115200\0" \
  95         "ethprime=FEC0\0" \
  96         "video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
  97         "video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
  98         "doboot=bootm ${loadaddr}\0" \
  99         "doloadfdt=false\0" \
 100         "setboottypez=setenv kernel zImage-cm-fx6;" \
 101                 "setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
 102                 "setenv doloadfdt true;\0" \
 103         "setboottypem=setenv kernel uImage-cm-fx6;" \
 104                 "setenv doboot bootm ${loadaddr};" \
 105                 "setenv doloadfdt false;\0"\
 106         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
 107         "sataroot=/dev/sda2 rw rootwait\0" \
 108         "nandroot=/dev/mtdblock4 rw\0" \
 109         "nandrootfstype=ubifs\0" \
 110         "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
 111                 "${video}\0" \
 112         "sataargs=setenv bootargs console=${console} root=${sataroot} " \
 113                 "${video}\0" \
 114         "nandargs=setenv bootargs console=${console} " \
 115                 "root=${nandroot} " \
 116                 "rootfstype=${nandrootfstype} " \
 117                 "${video}\0" \
 118         "nandboot=if run nandloadkernel; then " \
 119                         "run nandloadfdt;" \
 120                         "run setboottypem;" \
 121                         "run storagebootcmd;" \
 122                         "run setboottypez;" \
 123                         "run storagebootcmd;" \
 124                 "fi;\0" \
 125         "run_eboot=echo Starting EBOOT ...; "\
 126                 "mmc dev 2 && " \
 127                 "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
 128         "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
 129         "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
 130         "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
 131         "bootscript=echo Running bootscript from ${storagetype} ...;" \
 132                    "source ${loadaddr};\0" \
 133         "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
 134         "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
 135         "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
 136         "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
 137         "setupnandboot=setenv storagetype nand;\0" \
 138         "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
 139         "storagebootcmd=echo Booting from ${storagetype} ...;" \
 140                         "run ${storagetype}args; run doboot;\0" \
 141         "trybootk=if run loadkernel; then " \
 142                 "if ${doloadfdt}; then " \
 143                         "run loadfdt;" \
 144                 "fi;" \
 145                 "run storagebootcmd;" \
 146                 "fi;\0" \
 147         "trybootsmz=if run loadscript; then " \
 148                         "run bootscript;" \
 149                 "fi;" \
 150                 "run setboottypem;" \
 151                 "run trybootk;" \
 152                 "run setboottypez;" \
 153                 "run trybootk;\0"
 154
 155 #define CONFIG_BOOTCOMMAND \
 156         "run setupmmcboot;" \
 157         "mmc dev ${storagedev};" \
 158         "if mmc rescan; then " \
 159                 "run trybootsmz;" \
 160         "fi;" \
 161         "run setupusbboot;" \
 162         "if usb start; then "\
 163                 "if run loadscript; then " \
 164                         "run bootscript;" \
 165                 "fi;" \
 166         "fi;" \
 167         "run setupsataboot;" \
 168         "if sata init; then " \
 169                 "run trybootsmz;" \
 170         "fi;" \
 171         "run setupnandboot;" \
 172         "run nandboot;"
 173
 174 #define CONFIG_PREBOOT          "usb start"
 175
 176 /* SPI */
 177 #define CONFIG_SPI
 178 #define CONFIG_MXC_SPI
 179 #define CONFIG_SPI_FLASH
 180 #define CONFIG_SPI_FLASH_ATMEL
 181 #define CONFIG_SPI_FLASH_EON
 182 #define CONFIG_SPI_FLASH_GIGADEVICE
 183 #define CONFIG_SPI_FLASH_MACRONIX
 184 #define CONFIG_SPI_FLASH_SPANSION
 185 #define CONFIG_SPI_FLASH_STMICRO
 186 #define CONFIG_SPI_FLASH_SST
 187 #define CONFIG_SPI_FLASH_WINBOND
 188
 189 /* NAND */
 190 #ifndef CONFIG_SPL_BUILD
 191 #define CONFIG_CMD_NAND
 192 #define CONFIG_SYS_NAND_BASE            0x40000000
 193 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 194 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 195 #define CONFIG_NAND_MXS
 196 #define CONFIG_SYS_NAND_ONFI_DETECTION
 197 /* APBH DMA is required for NAND support */
 198 #define CONFIG_APBH_DMA
 199 #define CONFIG_APBH_DMA_BURST
 200 #define CONFIG_APBH_DMA_BURST8
 201 #endif
 202
 203 /* Ethernet */
 204 #define CONFIG_FEC_MXC
 205 #define CONFIG_FEC_MXC_PHYADDR          0
 206 #define CONFIG_FEC_XCV_TYPE             RGMII
 207 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 208 #define CONFIG_PHYLIB
 209 #define CONFIG_PHY_ATHEROS
 210 #define CONFIG_MII
 211 #define CONFIG_ETHPRIME                 "FEC0"
 212 #define CONFIG_ARP_TIMEOUT              200UL
 213 #define CONFIG_NET_RETRY_COUNT          5
 214
 215 /* USB */
 216 #define CONFIG_CMD_USB
 217 #define CONFIG_USB_EHCI
 218 #define CONFIG_USB_EHCI_MX6
 219 #define CONFIG_USB_STORAGE
 220 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 221 #define CONFIG_MXC_USB_FLAGS            0
 222 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 223 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 224 #define CONFIG_USB_KEYBOARD
 225 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 226 #define CONFIG_SYS_STDIO_DEREGISTER
 227
 228 /* I2C */
 229 #define CONFIG_CMD_I2C
 230 #define CONFIG_SYS_I2C
 231 #define CONFIG_SYS_I2C_MXC
 232 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 233 #define CONFIG_SYS_I2C_SPEED            100000
 234 #define CONFIG_SYS_MXC_I2C3_SPEED       400000
 235
 236 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 237 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 238 #define CONFIG_SYS_I2C_EEPROM_BUS       2
 239
 240 /* SATA */
 241 #define CONFIG_CMD_SATA
 242 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 243 #define CONFIG_LIBATA
 244 #define CONFIG_LBA48
 245 #define CONFIG_DWC_AHSATA
 246 #define CONFIG_DWC_AHSATA_PORT_ID       0
 247 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 248
 249 /* Boot */
 250 #define CONFIG_ZERO_BOOTDELAY_CHECK
 251 #define CONFIG_LOADADDR                 0x10800000
 252 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 253 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)
 254 #define CONFIG_SERIAL_TAG
 255
 256 /* misc */
 257 #define CONFIG_STACKSIZE                        (128 * 1024)
 258 #define CONFIG_SYS_MALLOC_LEN                   (10 * 1024 * 1024)
 259 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      800 /* 400 KB */
 260 #define CONFIG_OF_BOARD_SETUP
 261
 262 /* SPL */
 263 #include "imx6_spl.h"
 264 #define CONFIG_SPL_BOARD_INIT
 265 #define CONFIG_SPL_MMC_SUPPORT
 266 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 /* offset 64 kb */
 267 #define CONFIG_SYS_MONITOR_LEN  (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS / 2 * 1024)
 268 #define CONFIG_SPL_SPI_SUPPORT
 269 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 270 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
 271 #define CONFIG_SPL_SPI_LOAD
 272
 273 /* Display */
 274 #define CONFIG_VIDEO
 275 #define CONFIG_VIDEO_IPUV3
 276 #define CONFIG_IPUV3_CLK          260000000
 277 #define CONFIG_IMX_HDMI
 278 #define CONFIG_IMX_VIDEO_SKIP
 279 #define CONFIG_CFB_CONSOLE
 280 #define CONFIG_VGA_AS_SINGLE_DEVICE
 281 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 282 #define CONFIG_CONSOLE_MUX
 283 #define CONFIG_VIDEO_SW_CURSOR
 284
 285 #define CONFIG_SPLASH_SCREEN
 286 #define CONFIG_SPLASH_SOURCE
 287 #define CONFIG_CMD_BMP
 288 #define CONFIG_VIDEO_BMP_RLE8
 289
 290 #define CONFIG_VIDEO_LOGO
 291 #define CONFIG_VIDEO_BMP_LOGO
 292
 293 #endif  /* __CONFIG_CM_FX6_H */