]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/colibri_t20.h
09a65d544d0f2c6e09e781665ed545c12ac4e577
[karo-tx-uboot.git] / include / configs / colibri_t20.h
1 /*
2  * Copyright (C) 2012 Lucas Stach
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 #include "tegra20-common.h"
11
12 #define CONFIG_ARCH_MISC_INIT
13
14 /* High-level configuration options */
15 #define CONFIG_TEGRA_BOARD_STRING       "Toradex Colibri T20"
16
17 /* Board-specific serial config */
18 #define CONFIG_TEGRA_ENABLE_UARTA
19 #define CONFIG_TEGRA_UARTA_SDIO1
20 #define CONFIG_SYS_NS16550_COM1         NV_PA_APB_UARTA_BASE
21
22 #define CONFIG_MACH_TYPE                MACH_TYPE_COLIBRI_T20
23
24 /* I2C */
25 #define CONFIG_SYS_I2C_TEGRA
26 #define CONFIG_CMD_I2C
27
28 /* SD/MMC support */
29 #define CONFIG_MMC
30 #define CONFIG_GENERIC_MMC
31 #define CONFIG_TEGRA_MMC
32 #define CONFIG_CMD_MMC
33
34 /* USB host support */
35 #define CONFIG_USB_EHCI
36 #define CONFIG_USB_EHCI_TEGRA
37 #define CONFIG_USB_ULPI
38 #define CONFIG_USB_ULPI_VIEWPORT
39 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
40 #define CONFIG_USB_STORAGE
41 #define CONFIG_CMD_USB
42
43 /* USB networking support */
44 #define CONFIG_USB_HOST_ETHER
45 #define CONFIG_USB_ETHER_ASIX
46
47 /* General networking support */
48 #define CONFIG_CMD_DHCP
49 #define CONFIG_IP_DEFRAG
50 #define CONFIG_TFTP_BLOCKSIZE           1536
51 #define CONFIG_TFTP_TSIZE
52
53 /* LCD support */
54 #define CONFIG_LCD
55 #define CONFIG_PWM_TEGRA
56 #define CONFIG_VIDEO_TEGRA
57 #define LCD_BPP                         LCD_COLOR16
58 #define CONFIG_SYS_WHITE_ON_BLACK
59 #define CONFIG_CONSOLE_SCROLL_LINES     10
60 #define CONFIG_CMD_BMP
61 #define CONFIG_LCD_LOGO
62
63 /* NAND support */
64 #define CONFIG_CMD_NAND
65 #define CONFIG_TEGRA_NAND
66 #define CONFIG_SYS_MAX_NAND_DEVICE     1
67
68 /* Dynamic MTD partition support */
69 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
70 #define CONFIG_MTD_PARTITIONS
71 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
72 #define MTDIDS_DEFAULT          "nand0=tegra_nand"
73 #define MTDPARTS_DEFAULT        "mtdparts=tegra_nand:"          \
74                                 "2m(u-boot)ro,"                 \
75                                 "1m(u-boot-env),"               \
76                                 "1m(cfgblock)ro,"               \
77                                 "-(ubi)"
78
79 /* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
80 #define CONFIG_ENV_IS_IN_NAND
81 #define CONFIG_ENV_OFFSET              (SZ_2M)
82 #undef  CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
83 #define CONFIG_ENV_SIZE                (SZ_64K)
84
85 /* UBI */
86 #define CONFIG_CMD_BOOTZ
87 #define CONFIG_CMD_UBI
88 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
89 #define CONFIG_LZO
90 #define CONFIG_MTD_UBI_FASTMAP
91 #define CONFIG_RBTREE
92
93 /* Debug commands */
94 #define CONFIG_CMD_CACHE
95
96 /* Miscellaneous commands */
97 #define CONFIG_FAT_WRITE
98
99 #define BOARD_EXTRA_ENV_SETTINGS \
100         "mtdparts=" MTDPARTS_DEFAULT "\0"
101
102 /* Increase console I/O buffer size */
103 #undef CONFIG_SYS_CBSIZE
104 #define CONFIG_SYS_CBSIZE               1024
105
106 /* Increase arguments buffer size */
107 #undef CONFIG_SYS_BARGSIZE
108 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
109
110 /* Increase print buffer size */
111 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
112
113 /* Increase maximum number of arguments */
114 #undef CONFIG_SYS_MAXARGS
115 #define CONFIG_SYS_MAXARGS              32
116
117 #include "tegra-common-usb-gadget.h"
118 #include "tegra-common-post.h"
119
120 #endif /* __CONFIG_H */