]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/davinci_schmoogie.h
kconfig: add config option for shell prompt
[karo-tx-uboot.git] / include / configs / davinci_schmoogie.h
1 /*
2  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __CONFIG_H
8 #define __CONFIG_H
9
10 /*=======*/
11 /* Board */
12 /*=======*/
13 #define SCHMOOGIE
14 #define CONFIG_SYS_NAND_LARGEPAGE
15 #define CONFIG_SYS_USE_NAND
16 #define MACH_TYPE_SCHMOOGIE 1255
17 #define CONFIG_MACH_TYPE MACH_TYPE_SCHMOOGIE
18
19 /*===================*/
20 /* SoC Configuration */
21 /*===================*/
22 #define CONFIG_SYS_TIMERBASE            0x01c21400      /* use timer 0 */
23 #define CONFIG_SYS_HZ_CLOCK             27000000        /* Timer Input clock freq */
24 /*=============*/
25 /* Memory Info */
26 /*=============*/
27 #define CONFIG_SYS_MALLOC_LEN           (0x10000 + 256*1024)    /* malloc() len */
28 #define CONFIG_SYS_MEMTEST_START        0x80000000      /* memtest start address */
29 #define CONFIG_SYS_MEMTEST_END          0x81000000      /* 16MB RAM test */
30 #define CONFIG_NR_DRAM_BANKS    1               /* we have 1 bank of DRAM */
31 #define PHYS_SDRAM_1            0x80000000      /* DDR Start */
32 #define PHYS_SDRAM_1_SIZE       0x08000000      /* DDR size 128MB */
33 #define DDR_4BANKS                              /* 4-bank DDR2 (128MB) */
34 /*====================*/
35 /* Serial Driver info */
36 /*====================*/
37 #define CONFIG_SYS_NS16550
38 #define CONFIG_SYS_NS16550_SERIAL
39 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size, byteorder */
40 #define CONFIG_SYS_NS16550_COM1 0x01c20000      /* Base address of UART0 */
41 #define CONFIG_SYS_NS16550_CLK  CONFIG_SYS_HZ_CLOCK     /* Input clock to NS16550 */
42 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
43 #define CONFIG_BAUDRATE         115200          /* Default baud rate */
44 /*===================*/
45 /* I2C Configuration */
46 /*===================*/
47 #define CONFIG_SYS_I2C
48 #define CONFIG_SYS_I2C_DAVINCI
49 #define CONFIG_SYS_DAVINCI_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
50 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 10    /* Bogus, master-only in U-Boot */
51 /*==================================*/
52 /* Network & Ethernet Configuration */
53 /*==================================*/
54 #define CONFIG_DRIVER_TI_EMAC
55 #define CONFIG_MII
56 #define CONFIG_BOOTP_DNS
57 #define CONFIG_BOOTP_DNS2
58 #define CONFIG_BOOTP_SEND_HOSTNAME
59 #define CONFIG_NET_RETRY_COUNT  10
60 #define CONFIG_OVERWRITE_ETHADDR_ONCE
61 /*=====================*/
62 /* Flash & Environment */
63 /*=====================*/
64 #undef CONFIG_ENV_IS_IN_FLASH
65 #define CONFIG_SYS_NO_FLASH
66 #define CONFIG_NAND_DAVINCI
67 #define CONFIG_SYS_NAND_CS              2
68 #define CONFIG_ENV_IS_IN_NAND           /* U-Boot env in NAND Flash  */
69 #define CONFIG_ENV_SECT_SIZE    2048    /* Env sector Size */
70 #define CONFIG_ENV_SIZE         (128 << 10)     /* 128 KiB */
71 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is loaded by a bootloader */
72 #define CONFIG_SYS_NAND_BASE            0x02000000
73 #define CONFIG_SYS_NAND_HW_ECC
74 #define CONFIG_SYS_MAX_NAND_DEVICE      1       /* Max number of NAND devices */
75 #define CONFIG_ENV_OFFSET               0x0     /* Block 0--not used by bootcode */
76 /*=====================*/
77 /* Board related stuff */
78 /*=====================*/
79 #define CONFIG_RTC_DS1307               /* RTC chip on SCHMOOGIE */
80 #define CONFIG_SYS_I2C_RTC_ADDR 0x6f    /* RTC chip I2C address */
81 #define CONFIG_UID_DS28CM00             /* Unique ID on SCHMOOGIE */
82 #define CONFIG_SYS_UID_ADDR             0x50    /* UID chip I2C address */
83 /*==============================*/
84 /* U-Boot general configuration */
85 /*==============================*/
86 #define CONFIG_MISC_INIT_R
87 #undef CONFIG_BOOTDELAY
88 #define CONFIG_BOOTFILE         "uImage"        /* Boot file name */
89 #define CONFIG_SYS_CBSIZE               1024            /* Console I/O Buffer Size  */
90 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)        /* Print buffer sz */
91 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
92 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
93 #define CONFIG_SYS_LOAD_ADDR            0x80700000      /* default Linux kernel load address */
94 #define CONFIG_VERSION_VARIABLE
95 #define CONFIG_AUTO_COMPLETE            /* Won't work with hush so far, may be later */
96 #define CONFIG_SYS_HUSH_PARSER
97 #define CONFIG_CMDLINE_EDITING
98 #define CONFIG_SYS_LONGHELP
99 #define CONFIG_CRC32_VERIFY
100 #define CONFIG_MX_CYCLIC
101 /*===================*/
102 /* Linux Information */
103 /*===================*/
104 #define LINUX_BOOT_PARAM_ADDR   0x80000100
105 #define CONFIG_CMDLINE_TAG
106 #define CONFIG_SETUP_MEMORY_TAGS
107 #define CONFIG_BOOTARGS         "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
108 #define CONFIG_BOOTCOMMAND      "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
109 /*=================*/
110 /* U-Boot commands */
111 /*=================*/
112 #define CONFIG_CMD_ASKENV
113 #define CONFIG_CMD_DHCP
114 #define CONFIG_CMD_DIAG
115 #define CONFIG_CMD_I2C
116 #define CONFIG_CMD_MII
117 #define CONFIG_CMD_PING
118 #define CONFIG_CMD_SAVES
119 #define CONFIG_CMD_DATE
120 #define CONFIG_CMD_NAND
121 #undef CONFIG_CMD_EEPROM
122
123 #ifdef CONFIG_CMD_BDI
124 #define CONFIG_CLOCKS
125 #endif
126
127 #define CONFIG_MAX_RAM_BANK_SIZE        (256 << 20)     /* 256 MB */
128
129 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
130 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
131 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + \
132                                          CONFIG_SYS_INIT_RAM_SIZE - \
133                                          GENERATED_GBL_DATA_SIZE)
134
135 #endif /* __CONFIG_H */