include/configs/draco.h

   1 /*
   2  * (C) Copyright 2013 Siemens Schweiz AG
   3  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * Based on:
   6  * U-Boot file:/include/configs/am335x_evm.h
   7  *
   8  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_DRACO_H
  14 #define __CONFIG_DRACO_H
  15
  16 #define CONFIG_SIEMENS_DRACO
  17 #define MACH_TYPE_DRACO                 4314
  18 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_DRACO
  19
  20 #include "siemens-am33x-common.h"
  21
  22 #define CONFIG_DISPLAY_CPUINFO
  23 #define CONFIG_SYS_MPUCLK       300
  24 #define DDR_PLL_FREQ    303
  25 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
  26
  27 #define BOARD_DFU_BUTTON_GPIO   27      /* Use as default */
  28 #define GPIO_LAN9303_NRST       88      /* GPIO2_24 = gpio88 */
  29
  30 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  31         "button_dfu0=27\0" \
  32         "led0=103,1,0\0" \
  33         "led1=64,0,1\0"
  34
  35 #undef CONFIG_DOS_PARTITION
  36 #undef CONFIG_CMD_FAT
  37
  38 #define CONFIG_BOARD_LATE_INIT
  39
  40  /* Physical Memory Map */
  41 #define CONFIG_MAX_RAM_BANK_SIZE        (1024 << 20)    /* 1GB */
  42
  43 /* I2C Configuration */
  44 #define CONFIG_SYS_I2C_SPEED            100000
  45
  46 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
  47 #define EEPROM_ADDR_DDR3 0x90
  48 #define EEPROM_ADDR_CHIP 0x120
  49
  50 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
  51
  52 #undef CONFIG_SPL_NET_SUPPORT
  53 #undef CONFIG_SPL_NET_VCI_STRING
  54 #undef CONFIG_SPL_ETH_SUPPORT
  55
  56 #undef CONFIG_MII
  57 #undef CONFIG_PHY_GIGE
  58 #define CONFIG_PHY_SMSC
  59
  60 #define CONFIG_FACTORYSET
  61
  62 /* Watchdog */
  63 #define CONFIG_OMAP_WATCHDOG
  64
  65 /* Define own nand partitions */
  66 #define CONFIG_ENV_OFFSET_REDUND    0x2E0000
  67 #define CONFIG_ENV_SIZE_REDUND      0x2000
  68 #define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
  69
  70
  71 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V2
  72
  73 #ifndef CONFIG_SPL_BUILD
  74
  75 /* Default env settings */
  76 #define CONFIG_EXTRA_ENV_SETTINGS \
  77         "hostname=draco\0" \
  78         "nand_img_size=0x400000\0" \
  79         "optargs=\0" \
  80         "preboot=draco_led 0\0" \
  81         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  82         CONFIG_ENV_SETTINGS_V2 \
  83         CONFIG_ENV_SETTINGS_NAND_V2
  84
  85 #ifndef CONFIG_RESTORE_FLASH
  86 /* set to negative value for no autoboot */
  87 #define CONFIG_BOOTDELAY                3
  88
  89 #define CONFIG_BOOTCOMMAND \
  90 "if dfubutton; then " \
  91         "run dfu_start; " \
  92         "reset; " \
  93 "fi;" \
  94 "run nand_boot;" \
  95 "run nand_boot_backup;" \
  96 "reset;"
  97
  98
  99 #else
 100 #define CONFIG_BOOTDELAY                0
 101
 102 #define CONFIG_BOOTCOMMAND                      \
 103         "setenv autoload no; "                  \
 104         "dhcp; "                                \
 105         "if tftp 80000000 debrick.scr; then "   \
 106                 "source 80000000; "             \
 107         "fi"
 108 #endif
 109 #endif  /* CONFIG_SPL_BUILD */
 110 #endif  /* ! __CONFIG_DRACO_H */