include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11 #define CONFIG_MX6
  12 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  13 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  14
  15 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  16
  17 #include <asm/arch/imx-regs.h>
  18 #include <asm/imx-common/gpio.h>
  19
  20 /* ATAGs */
  21 #define CONFIG_CMDLINE_TAG
  22 #define CONFIG_SETUP_MEMORY_TAGS
  23 #define CONFIG_INITRD_TAG
  24 #define CONFIG_SERIAL_TAG
  25 #define CONFIG_REVISION_TAG
  26
  27 #define CONFIG_SYS_GENERIC_BOARD
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  31
  32 /* Init Functions */
  33 #define CONFIG_BOARD_EARLY_INIT_F
  34 #define CONFIG_MISC_INIT_R
  35
  36 /* GPIO */
  37 #define CONFIG_MXC_GPIO
  38
  39 /* Serial */
  40 #define CONFIG_MXC_UART
  41 #define CONFIG_MXC_UART_BASE           UART2_BASE
  42
  43 #ifdef CONFIG_SPI_FLASH
  44
  45 /* SPI */
  46 #define CONFIG_CMD_SF
  47 #ifdef CONFIG_CMD_SF
  48   #define CONFIG_MXC_SPI
  49   #define CONFIG_SPI_FLASH_MTD
  50   #define CONFIG_SPI_FLASH_BAR
  51   #define CONFIG_SPI_FLASH_WINBOND
  52   #define CONFIG_SF_DEFAULT_BUS              0
  53   #define CONFIG_SF_DEFAULT_CS               (0|(IMX_GPIO_NR(3, 19)<<8))
  54                                              /* GPIO 3-19 (21248) */
  55   #define CONFIG_SF_DEFAULT_SPEED            30000000
  56   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  57 #endif
  58
  59 #else
  60 /* Enable NAND support */
  61 #define CONFIG_CMD_TIME
  62 #define CONFIG_CMD_NAND
  63 #define CONFIG_CMD_NAND_TRIMFFS
  64 #ifdef CONFIG_CMD_NAND
  65   #define CONFIG_NAND_MXS
  66   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  67   #define CONFIG_SYS_NAND_BASE          0x40000000
  68   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  69   #define CONFIG_SYS_NAND_ONFI_DETECTION
  70
  71   /* DMA stuff, needed for GPMI/MXS NAND support */
  72   #define CONFIG_APBH_DMA
  73   #define CONFIG_APBH_DMA_BURST
  74   #define CONFIG_APBH_DMA_BURST8
  75 #endif
  76
  77 #endif /* CONFIG_SPI_FLASH */
  78
  79 /* Flattened Image Tree Suport */
  80 #define CONFIG_FIT
  81 #define CONFIG_FIT_VERBOSE
  82
  83 /* I2C Configs */
  84 #define CONFIG_CMD_I2C
  85 #define CONFIG_SYS_I2C
  86 #define CONFIG_SYS_I2C_MXC
  87 #define CONFIG_SYS_I2C_SPEED              100000
  88
  89 /* MMC Configs */
  90 #define CONFIG_FSL_ESDHC
  91 #define CONFIG_FSL_USDHC
  92 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  93 #define CONFIG_SYS_FSL_USDHC_NUM       1
  94 #define CONFIG_MMC
  95 #define CONFIG_CMD_MMC
  96 #define CONFIG_GENERIC_MMC
  97 #define CONFIG_BOUNCE_BUFFER
  98
  99 /* Filesystem support */
 100 #define CONFIG_CMD_EXT2
 101 #define CONFIG_CMD_FAT
 102 #define CONFIG_CMD_UBIFS
 103 #define CONFIG_DOS_PARTITION
 104
 105 /* Network config - Allow larger/faster download for TFTP/NFS */
 106 #define CONFIG_IP_DEFRAG
 107 #define CONFIG_TFTP_BLOCKSIZE 4096
 108 #define CONFIG_NFS_READ_SIZE  4096
 109
 110 /*
 111  * SATA Configs
 112  */
 113 #define CONFIG_CMD_SATA
 114 #ifdef CONFIG_CMD_SATA
 115   #define CONFIG_DWC_AHSATA
 116   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 117   #define CONFIG_DWC_AHSATA_PORT_ID     0
 118   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 119   #define CONFIG_LBA48
 120   #define CONFIG_LIBATA
 121 #endif
 122
 123 /*
 124  * PCI express
 125  */
 126 #define CONFIG_CMD_PCI
 127 #ifdef CONFIG_CMD_PCI
 128 #define CONFIG_PCI
 129 #define CONFIG_PCI_PNP
 130 #define CONFIG_PCI_SCAN_SHOW
 131 #define CONFIG_PCIE_IMX
 132 #endif
 133
 134 /*
 135  * PMIC
 136  */
 137 #define CONFIG_POWER
 138 #define CONFIG_POWER_I2C
 139 #define CONFIG_POWER_PFUZE100
 140 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 141 #define CONFIG_POWER_LTC3676
 142 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 143
 144 /* Various command support */
 145 #include <config_cmd_default.h>
 146 #undef CONFIG_CMD_IMLS
 147 #define CONFIG_CMD_PING
 148 #define CONFIG_CMD_DHCP
 149 #define CONFIG_CMD_MII
 150 #define CONFIG_CMD_NET
 151 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 152 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 153 #define CONFIG_CMD_SETEXPR
 154 #define CONFIG_CMD_BOOTZ
 155 #define CONFIG_CMD_GSC
 156 #define CONFIG_CMD_UBI
 157 #define CONFIG_RBTREE
 158 #define CONFIG_LZO
 159 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 160 #ifdef CONFIG_CMD_FUSE
 161 #define CONFIG_MXC_OCOTP
 162 #endif
 163
 164
 165 /* Ethernet support */
 166 #define CONFIG_FEC_MXC
 167 #define CONFIG_MII
 168 #define IMX_FEC_BASE             ENET_BASE_ADDR
 169 #define CONFIG_FEC_XCV_TYPE      RGMII
 170 #define CONFIG_ETHPRIME          "FEC"
 171 #define CONFIG_FEC_MXC_PHYADDR   0
 172 #define CONFIG_PHYLIB
 173 #define CONFIG_ARP_TIMEOUT       200UL
 174
 175 /* USB Configs */
 176 #define CONFIG_CMD_USB
 177 #define CONFIG_USB_EHCI
 178 #define CONFIG_USB_EHCI_MX6
 179 #define CONFIG_USB_STORAGE
 180 #define CONFIG_USB_HOST_ETHER
 181 #define CONFIG_USB_ETHER_ASIX
 182 #define CONFIG_USB_ETHER_SMSC95XX
 183 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 184 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 185 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 186 #define CONFIG_MXC_USB_FLAGS      0
 187 #define CONFIG_USB_KEYBOARD
 188 #define CONFIG_CI_UDC
 189 #define CONFIG_USBD_HS
 190 #define CONFIG_USB_GADGET_DUALSPEED
 191 #define CONFIG_USB_ETHER
 192 #define CONFIG_USB_ETH_CDC
 193 #define CONFIG_NETCONSOLE
 194 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 195
 196 /* Framebuffer and LCD */
 197 #define CONFIG_VIDEO
 198 #define CONFIG_VIDEO_IPUV3
 199 #define CONFIG_CFB_CONSOLE
 200 #define CONFIG_VGA_AS_SINGLE_DEVICE
 201 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 202 #define CONFIG_VIDEO_BMP_RLE8
 203 #define CONFIG_SPLASH_SCREEN
 204 #define CONFIG_BMP_16BPP
 205 #define CONFIG_VIDEO_LOGO
 206 #define CONFIG_IPUV3_CLK          260000000
 207 #define CONFIG_CMD_HDMIDETECT
 208 #define CONFIG_CONSOLE_MUX
 209 #define CONFIG_IMX_HDMI
 210 #define CONFIG_IMX_VIDEO_SKIP
 211
 212 /* serial console (ttymxc1,115200) */
 213 #define CONFIG_CONS_INDEX              1
 214 #define CONFIG_BAUDRATE                115200
 215
 216 /* Miscellaneous configurable options */
 217 #define CONFIG_SYS_LONGHELP
 218 #define CONFIG_SYS_HUSH_PARSER
 219 #define CONFIG_SYS_PROMPT                    "Ventana > "
 220 #define CONFIG_SYS_CBSIZE                    1024
 221 #define CONFIG_AUTO_COMPLETE
 222 #define CONFIG_CMDLINE_EDITING
 223 #define CONFIG_HWCONFIG
 224
 225 /* Print Buffer Size */
 226 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 227 #define CONFIG_SYS_MAXARGS                 16
 228 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 229
 230 /* Memory configuration */
 231 #define CONFIG_SYS_MEMTEST_START       0x10000000
 232 #define CONFIG_SYS_MEMTEST_END         0x10010000
 233 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 234 #define CONFIG_SYS_TEXT_BASE             0x17800000
 235 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 236
 237 /* Physical Memory Map */
 238 #define CONFIG_NR_DRAM_BANKS           1
 239 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 240 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 241 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 242 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 243
 244 #define CONFIG_SYS_INIT_SP_OFFSET \
 245         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 246 #define CONFIG_SYS_INIT_SP_ADDR \
 247         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 248
 249 /* FLASH and environment organization */
 250 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 251
 252 /*
 253  * MTD Command for mtdparts
 254  */
 255 #define CONFIG_CMD_MTDPARTS
 256 #define CONFIG_MTD_DEVICE
 257 #define CONFIG_MTD_PARTITIONS
 258 #ifdef CONFIG_SPI_FLASH
 259 #define MTDIDS_DEFAULT    "nor0=nor"
 260 #define MTDPARTS_DEFAULT  \
 261         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 262 #else
 263 #define MTDIDS_DEFAULT    "nand0=nand"
 264 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 265 #endif
 266
 267 /* Persistent Environment Config */
 268 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 269 #ifdef CONFIG_SPI_FLASH
 270 #define CONFIG_ENV_IS_IN_SPI_FLASH
 271 #else
 272 #define CONFIG_ENV_IS_IN_NAND
 273 #endif
 274 #if defined(CONFIG_ENV_IS_IN_MMC)
 275   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 276   #define CONFIG_ENV_SIZE                (8 * 1024)
 277   #define CONFIG_SYS_MMC_ENV_DEV         0
 278 #elif defined(CONFIG_ENV_IS_IN_NAND)
 279   #define CONFIG_ENV_OFFSET              (16 << 20)
 280   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 281   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 282   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 283   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 284 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 285   #define CONFIG_ENV_OFFSET              (512 * 1024)
 286   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 287   #define CONFIG_ENV_SIZE                (8 * 1024)
 288   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 289   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 290   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 291   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 292 #endif
 293
 294 /* Environment */
 295 #define CONFIG_BOOTDELAY          3
 296 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 297 #define CONFIG_IPADDR             192.168.1.1
 298 #define CONFIG_SERVERIP           192.168.1.146
 299 #define HWCONFIG_DEFAULT \
 300         "hwconfig=rs232;" \
 301         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 302
 303 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 304         "console=ttymxc1\0" \
 305         "bootdevs=usb mmc sata flash\0" \
 306         HWCONFIG_DEFAULT \
 307         "video=\0" \
 308         \
 309         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 310         "mtdids=" MTDIDS_DEFAULT "\0" \
 311         \
 312         "fdt_high=0xffffffff\0" \
 313         "fdt_addr=0x18000000\0" \
 314         "loadfdt=" \
 315                 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
 316                         "echo Loaded DTB from boot/${fdt_file}; " \
 317                 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
 318                         "echo Loaded DTB from boot/${fdt_file1}; " \
 319                 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
 320                                 "echo Loaded DTB from boot/${fdt_file2}; " \
 321                 "fi\0" \
 322         \
 323         "script=boot/6x_bootscript-ventana\0" \
 324         "loadscript=" \
 325                 "if ${fsload} ${loadaddr} ${script}; then " \
 326                         "source; " \
 327                 "fi\0" \
 328         \
 329         "uimage=boot/uImage\0" \
 330         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 331         "mmc_boot=" \
 332                 "setenv fsload 'ext2load mmc 0:1'; " \
 333                 "mmc dev 0 && mmc rescan && " \
 334                 "run loadscript; " \
 335                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 336                         "setenv bootargs console=${console},${baudrate} " \
 337                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 338                                 "rootwait rw ${video} ${extra}; " \
 339                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 340                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 341                         "else " \
 342                                 "bootm; " \
 343                         "fi; " \
 344                 "fi\0" \
 345         \
 346         "sata_boot=" \
 347                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 348                 "run loadscript; " \
 349                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 350                         "setenv bootargs console=${console},${baudrate} " \
 351                                 "root=/dev/sda1 rootfstype=ext4 " \
 352                                 "rootwait rw ${video} ${extra}; " \
 353                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 354                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 355                         "else " \
 356                                 "bootm; " \
 357                         "fi; " \
 358                 "fi\0" \
 359         "usb_boot=" \
 360                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 361                 "run loadscript; " \
 362                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 363                         "setenv bootargs console=${console},${baudrate} " \
 364                                 "root=/dev/sda1 rootfstype=ext4 " \
 365                                 "rootwait rw ${video} ${extra}; " \
 366                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 367                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 368                         "else " \
 369                                 "bootm; " \
 370                         "fi; " \
 371                 "fi\0"
 372
 373 #ifdef CONFIG_SPI_FLASH
 374         #define CONFIG_EXTRA_ENV_SETTINGS \
 375         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 376         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 377         "image_uboot=ventana/u-boot_spi.imx\0" \
 378         \
 379         "spi_koffset=0x90000\0" \
 380         "spi_klen=0x200000\0" \
 381         \
 382         "spi_updateuboot=echo Updating uboot from " \
 383                 "${serverip}:${image_uboot}...; " \
 384                 "tftpboot ${loadaddr} ${image_uboot} && " \
 385                 "sf probe && sf erase 0 80000 && " \
 386                         "sf write ${loadaddr} 400 ${filesize}\0" \
 387         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 388                 "to ${spi_koffset} ...; " \
 389                 "tftp ${loadaddr} ${image_os} && " \
 390                 "sf probe && " \
 391                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 392         \
 393         "flash_boot=" \
 394                 "if sf probe && " \
 395                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 396                         "setenv bootargs console=${console},${baudrate} " \
 397                                 "root=/dev/mtdblock3 " \
 398                                 "rootfstype=squashfs,jffs2 " \
 399                                 "${video} ${extra}; " \
 400                         "bootm; " \
 401                 "fi\0"
 402 #else
 403         #define CONFIG_EXTRA_ENV_SETTINGS \
 404         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 405         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 406         \
 407         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 408                 "tftp ${loadaddr} ${image_rootfs} && " \
 409                 "nand erase.part rootfs && " \
 410                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 411         \
 412         "flash_boot=" \
 413                 "setenv fsload 'ubifsload'; " \
 414                 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
 415                 "run loadscript; " \
 416                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 417                         "setenv bootargs console=${console},${baudrate} " \
 418                                 "root=ubi0:rootfs ubi.mtd=2 " \
 419                                 "rootfstype=ubifs ${video} ${extra}; " \
 420                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 421                                 "ubifsumount; " \
 422                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 423                         "else " \
 424                                 "ubifsumount; bootm; " \
 425                         "fi; " \
 426                 "fi\0"
 427 #endif
 428
 429 #define CONFIG_BOOTCOMMAND \
 430         "for btype in ${bootdevs}; do " \
 431                 "echo; echo Attempting ${btype} boot...; " \
 432                 "if run ${btype}_boot; then; fi; " \
 433         "done"
 434
 435 /* Device Tree Support */
 436 #define CONFIG_OF_BOARD_SETUP
 437 #define CONFIG_OF_LIBFDT
 438 #define CONFIG_FDT_FIXUP_PARTITIONS
 439
 440 #ifndef CONFIG_SYS_DCACHE_OFF
 441   #define CONFIG_CMD_CACHE
 442 #endif
 443
 444 #endif                         /* __CONFIG_H */