include/configs/gw_ventana.h

   1 /*
   2  * Copyright (C) 2013 Gateworks Corporation
   3  *
   4  * SPDX-License-Identifier: GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include "mx6_common.h"
  11 #define CONFIG_MX6
  12 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
  13 #define CONFIG_DISPLAY_BOARDINFO_LATE  /* display board info (after reloc) */
  14
  15 #define CONFIG_MACH_TYPE        4520   /* Gateworks Ventana Platform */
  16
  17 #include <asm/arch/imx-regs.h>
  18 #include <asm/imx-common/gpio.h>
  19
  20 /* ATAGs */
  21 #define CONFIG_CMDLINE_TAG
  22 #define CONFIG_SETUP_MEMORY_TAGS
  23 #define CONFIG_INITRD_TAG
  24 #define CONFIG_SERIAL_TAG
  25 #define CONFIG_REVISION_TAG
  26
  27 #define CONFIG_SYS_GENERIC_BOARD
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  31
  32 /* Init Functions */
  33 #define CONFIG_BOARD_EARLY_INIT_F
  34 #define CONFIG_MISC_INIT_R
  35
  36 /* GPIO */
  37 #define CONFIG_MXC_GPIO
  38
  39 /* Serial */
  40 #define CONFIG_MXC_UART
  41 #define CONFIG_MXC_UART_BASE           UART2_BASE
  42
  43 #ifdef CONFIG_SPI_FLASH
  44
  45 /* SPI */
  46 #define CONFIG_CMD_SF
  47 #ifdef CONFIG_CMD_SF
  48   #define CONFIG_MXC_SPI
  49   #define CONFIG_SPI_FLASH_MTD
  50   #define CONFIG_SPI_FLASH_BAR
  51   #define CONFIG_SPI_FLASH_WINBOND
  52   #define CONFIG_SF_DEFAULT_BUS              0
  53   #define CONFIG_SF_DEFAULT_CS               (0|(IMX_GPIO_NR(3, 19)<<8))
  54                                              /* GPIO 3-19 (21248) */
  55   #define CONFIG_SF_DEFAULT_SPEED            30000000
  56   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
  57 #endif
  58
  59 #else
  60 /* Enable NAND support */
  61 #define CONFIG_CMD_TIME
  62 #define CONFIG_CMD_NAND
  63 #define CONFIG_CMD_NAND_TRIMFFS
  64 #ifdef CONFIG_CMD_NAND
  65   #define CONFIG_NAND_MXS
  66   #define CONFIG_SYS_MAX_NAND_DEVICE    1
  67   #define CONFIG_SYS_NAND_BASE          0x40000000
  68   #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  69   #define CONFIG_SYS_NAND_ONFI_DETECTION
  70
  71   /* DMA stuff, needed for GPMI/MXS NAND support */
  72   #define CONFIG_APBH_DMA
  73   #define CONFIG_APBH_DMA_BURST
  74   #define CONFIG_APBH_DMA_BURST8
  75 #endif
  76
  77 #endif /* CONFIG_SPI_FLASH */
  78
  79 /* Flattened Image Tree Suport */
  80 #define CONFIG_FIT
  81 #define CONFIG_FIT_VERBOSE
  82
  83 /* I2C Configs */
  84 #define CONFIG_CMD_I2C
  85 #define CONFIG_SYS_I2C
  86 #define CONFIG_SYS_I2C_MXC
  87 #define CONFIG_SYS_I2C_SPEED              100000
  88
  89 /* MMC Configs */
  90 #define CONFIG_FSL_ESDHC
  91 #define CONFIG_FSL_USDHC
  92 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  93 #define CONFIG_SYS_FSL_USDHC_NUM       1
  94 #define CONFIG_MMC
  95 #define CONFIG_CMD_MMC
  96 #define CONFIG_GENERIC_MMC
  97 #define CONFIG_BOUNCE_BUFFER
  98
  99 /* Filesystem support */
 100 #define CONFIG_CMD_EXT2
 101 #define CONFIG_CMD_FAT
 102 #define CONFIG_CMD_UBIFS
 103 #define CONFIG_DOS_PARTITION
 104
 105 /* Network config - Allow larger/faster download for TFTP/NFS */
 106 #define CONFIG_IP_DEFRAG
 107 #define CONFIG_TFTP_BLOCKSIZE 4096
 108 #define CONFIG_NFS_READ_SIZE  4096
 109
 110 /*
 111  * SATA Configs
 112  */
 113 #define CONFIG_CMD_SATA
 114 #ifdef CONFIG_CMD_SATA
 115   #define CONFIG_DWC_AHSATA
 116   #define CONFIG_SYS_SATA_MAX_DEVICE    1
 117   #define CONFIG_DWC_AHSATA_PORT_ID     0
 118   #define CONFIG_DWC_AHSATA_BASE_ADDR   SATA_ARB_BASE_ADDR
 119   #define CONFIG_LBA48
 120   #define CONFIG_LIBATA
 121 #endif
 122
 123 /*
 124  * PCI express
 125  */
 126 #define CONFIG_CMD_PCI
 127 #ifdef CONFIG_CMD_PCI
 128 #define CONFIG_PCI
 129 #define CONFIG_PCI_PNP
 130 #define CONFIG_PCI_SCAN_SHOW
 131 #define CONFIG_PCIE_IMX
 132 #endif
 133
 134 /*
 135  * PMIC
 136  */
 137 #define CONFIG_POWER
 138 #define CONFIG_POWER_I2C
 139 #define CONFIG_POWER_PFUZE100
 140 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 141 #define CONFIG_POWER_LTC3676
 142 #define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 143
 144 /* Various command support */
 145 #include <config_cmd_default.h>
 146 #undef CONFIG_CMD_IMLS
 147 #define CONFIG_CMD_PING
 148 #define CONFIG_CMD_DHCP
 149 #define CONFIG_CMD_MII
 150 #define CONFIG_CMD_NET
 151 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
 152 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
 153 #define CONFIG_CMD_SETEXPR
 154 #define CONFIG_CMD_BOOTZ
 155 #define CONFIG_CMD_GSC
 156 #define CONFIG_CMD_UBI
 157 #define CONFIG_RBTREE
 158 #define CONFIG_LZO
 159 #define CONFIG_CMD_FUSE          /* eFUSE read/write support */
 160 #ifdef CONFIG_CMD_FUSE
 161 #define CONFIG_MXC_OCOTP
 162 #endif
 163
 164
 165 /* Ethernet support */
 166 #define CONFIG_FEC_MXC
 167 #define CONFIG_MII
 168 #define IMX_FEC_BASE             ENET_BASE_ADDR
 169 #define CONFIG_FEC_XCV_TYPE      RGMII
 170 #define CONFIG_ETHPRIME          "FEC"
 171 #define CONFIG_FEC_MXC_PHYADDR   0
 172 #define CONFIG_PHYLIB
 173 #define CONFIG_ARP_TIMEOUT       200UL
 174
 175 /* USB Configs */
 176 #define CONFIG_CMD_USB
 177 #define CONFIG_USB_EHCI
 178 #define CONFIG_USB_EHCI_MX6
 179 #define CONFIG_USB_STORAGE
 180 #define CONFIG_USB_HOST_ETHER
 181 #define CONFIG_USB_ETHER_ASIX
 182 #define CONFIG_USB_ETHER_SMSC95XX
 183 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 184 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 185 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
 186 #define CONFIG_MXC_USB_FLAGS      0
 187 #define CONFIG_USB_KEYBOARD
 188 #define CONFIG_CI_UDC
 189 #define CONFIG_USBD_HS
 190 #define CONFIG_USB_GADGET_DUALSPEED
 191 #define CONFIG_USB_ETHER
 192 #define CONFIG_USB_ETH_CDC
 193 #define CONFIG_NETCONSOLE
 194 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 195 #define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
 196
 197 /* serial console (ttymxc1,115200) */
 198 #define CONFIG_CONS_INDEX              1
 199 #define CONFIG_BAUDRATE                115200
 200
 201 /* Miscellaneous configurable options */
 202 #define CONFIG_SYS_LONGHELP
 203 #define CONFIG_SYS_HUSH_PARSER
 204 #define CONFIG_SYS_PROMPT                    "Ventana > "
 205 #define CONFIG_SYS_CBSIZE                    1024
 206 #define CONFIG_AUTO_COMPLETE
 207 #define CONFIG_CMDLINE_EDITING
 208 #define CONFIG_HWCONFIG
 209
 210 /* Print Buffer Size */
 211 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 212 #define CONFIG_SYS_MAXARGS                 16
 213 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 214
 215 /* Memory configuration */
 216 #define CONFIG_SYS_MEMTEST_START       0x10000000
 217 #define CONFIG_SYS_MEMTEST_END         0x10010000
 218 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 219 #define CONFIG_SYS_TEXT_BASE             0x17800000
 220 #define CONFIG_SYS_LOAD_ADDR           0x12000000
 221
 222 /* Physical Memory Map */
 223 #define CONFIG_NR_DRAM_BANKS           1
 224 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 225 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 226 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 227 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 228
 229 #define CONFIG_SYS_INIT_SP_OFFSET \
 230         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 231 #define CONFIG_SYS_INIT_SP_ADDR \
 232         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 233
 234 /* FLASH and environment organization */
 235 #define CONFIG_SYS_NO_FLASH  /* no NOR flash */
 236
 237 /*
 238  * MTD Command for mtdparts
 239  */
 240 #define CONFIG_CMD_MTDPARTS
 241 #define CONFIG_MTD_DEVICE
 242 #define CONFIG_MTD_PARTITIONS
 243 #ifdef CONFIG_SPI_FLASH
 244 #define MTDIDS_DEFAULT    "nor0=nor"
 245 #define MTDPARTS_DEFAULT  \
 246         "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
 247 #else
 248 #define MTDIDS_DEFAULT    "nand0=nand"
 249 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
 250 #endif
 251
 252 /* Persistent Environment Config */
 253 #define CONFIG_ENV_OVERWRITE    /* allow to overwrite serial and ethaddr */
 254 #ifdef CONFIG_SPI_FLASH
 255 #define CONFIG_ENV_IS_IN_SPI_FLASH
 256 #else
 257 #define CONFIG_ENV_IS_IN_NAND
 258 #endif
 259 #if defined(CONFIG_ENV_IS_IN_MMC)
 260   #define CONFIG_ENV_OFFSET              (6 * 64 * 1024)
 261   #define CONFIG_ENV_SIZE                (8 * 1024)
 262   #define CONFIG_SYS_MMC_ENV_DEV         0
 263 #elif defined(CONFIG_ENV_IS_IN_NAND)
 264   #define CONFIG_ENV_OFFSET              (16 << 20)
 265   #define CONFIG_ENV_SECT_SIZE           (128 << 10)
 266   #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
 267   #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 << 10))
 268   #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 269 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 270   #define CONFIG_ENV_OFFSET              (512 * 1024)
 271   #define CONFIG_ENV_SECT_SIZE           (64 * 1024)
 272   #define CONFIG_ENV_SIZE                (8 * 1024)
 273   #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 274   #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 275   #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 276   #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 277 #endif
 278
 279 /* Environment */
 280 #define CONFIG_BOOTDELAY          3
 281 #define CONFIG_LOADADDR           CONFIG_SYS_LOAD_ADDR
 282 #define CONFIG_IPADDR             192.168.1.1
 283 #define CONFIG_SERVERIP           192.168.1.146
 284 #define HWCONFIG_DEFAULT \
 285         "hwconfig=rs232;" \
 286         "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
 287
 288 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 289         "console=ttymxc1\0" \
 290         "bootdevs=usb mmc sata flash\0" \
 291         HWCONFIG_DEFAULT \
 292         "video=\0" \
 293         \
 294         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 295         "mtdids=" MTDIDS_DEFAULT "\0" \
 296         \
 297         "fdt_high=0xffffffff\0" \
 298         "fdt_addr=0x18000000\0" \
 299         "loadfdt=" \
 300                 "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
 301                         "echo Loaded DTB from boot/${fdt_file}; " \
 302                 "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
 303                         "echo Loaded DTB from boot/${fdt_file1}; " \
 304                 "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
 305                                 "echo Loaded DTB from boot/${fdt_file2}; " \
 306                 "fi\0" \
 307         \
 308         "script=boot/6x_bootscript-ventana\0" \
 309         "loadscript=" \
 310                 "if ${fsload} ${loadaddr} ${script}; then " \
 311                         "source; " \
 312                 "fi\0" \
 313         \
 314         "uimage=boot/uImage\0" \
 315         "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
 316         "mmc_boot=" \
 317                 "setenv fsload 'ext2load mmc 0:1'; " \
 318                 "mmc dev 0 && mmc rescan && " \
 319                 "run loadscript; " \
 320                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 321                         "setenv bootargs console=${console},${baudrate} " \
 322                                 "root=/dev/mmcblk0p1 rootfstype=ext4 " \
 323                                 "rootwait rw ${video} ${extra}; " \
 324                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 325                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 326                         "else " \
 327                                 "bootm; " \
 328                         "fi; " \
 329                 "fi\0" \
 330         \
 331         "sata_boot=" \
 332                 "setenv fsload 'ext2load sata 0:1'; sata init && " \
 333                 "run loadscript; " \
 334                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 335                         "setenv bootargs console=${console},${baudrate} " \
 336                                 "root=/dev/sda1 rootfstype=ext4 " \
 337                                 "rootwait rw ${video} ${extra}; " \
 338                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 339                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 340                         "else " \
 341                                 "bootm; " \
 342                         "fi; " \
 343                 "fi\0" \
 344         "usb_boot=" \
 345                 "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
 346                 "run loadscript; " \
 347                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 348                         "setenv bootargs console=${console},${baudrate} " \
 349                                 "root=/dev/sda1 rootfstype=ext4 " \
 350                                 "rootwait rw ${video} ${extra}; " \
 351                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 352                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 353                         "else " \
 354                                 "bootm; " \
 355                         "fi; " \
 356                 "fi\0"
 357
 358 #ifdef CONFIG_SPI_FLASH
 359         #define CONFIG_EXTRA_ENV_SETTINGS \
 360         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 361         "image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
 362         "image_uboot=ventana/u-boot_spi.imx\0" \
 363         \
 364         "spi_koffset=0x90000\0" \
 365         "spi_klen=0x200000\0" \
 366         \
 367         "spi_updateuboot=echo Updating uboot from " \
 368                 "${serverip}:${image_uboot}...; " \
 369                 "tftpboot ${loadaddr} ${image_uboot} && " \
 370                 "sf probe && sf erase 0 80000 && " \
 371                         "sf write ${loadaddr} 400 ${filesize}\0" \
 372         "spi_update=echo Updating OS from ${serverip}:${image_os} " \
 373                 "to ${spi_koffset} ...; " \
 374                 "tftp ${loadaddr} ${image_os} && " \
 375                 "sf probe && " \
 376                 "sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
 377         \
 378         "flash_boot=" \
 379                 "if sf probe && " \
 380                 "sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
 381                         "setenv bootargs console=${console},${baudrate} " \
 382                                 "root=/dev/mtdblock3 " \
 383                                 "rootfstype=squashfs,jffs2 " \
 384                                 "${video} ${extra}; " \
 385                         "bootm; " \
 386                 "fi\0"
 387 #else
 388         #define CONFIG_EXTRA_ENV_SETTINGS \
 389         CONFIG_EXTRA_ENV_SETTINGS_COMMON \
 390         "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
 391         \
 392         "nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
 393                 "tftp ${loadaddr} ${image_rootfs} && " \
 394                 "nand erase.part rootfs && " \
 395                 "nand write ${loadaddr} rootfs ${filesize}\0" \
 396         \
 397         "flash_boot=" \
 398                 "setenv fsload 'ubifsload'; " \
 399                 "ubi part rootfs && ubifsmount ubi0:rootfs; " \
 400                 "run loadscript; " \
 401                 "if ${fsload} ${loadaddr} ${uimage}; then " \
 402                         "setenv bootargs console=${console},${baudrate} " \
 403                                 "root=ubi0:rootfs ubi.mtd=2 " \
 404                                 "rootfstype=ubifs ${video} ${extra}; " \
 405                         "if run loadfdt && fdt addr ${fdt_addr}; then " \
 406                                 "ubifsumount; " \
 407                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 408                         "else " \
 409                                 "ubifsumount; bootm; " \
 410                         "fi; " \
 411                 "fi\0"
 412 #endif
 413
 414 #define CONFIG_BOOTCOMMAND \
 415         "for btype in ${bootdevs}; do " \
 416                 "echo; echo Attempting ${btype} boot...; " \
 417                 "if run ${btype}_boot; then; fi; " \
 418         "done"
 419
 420 /* Device Tree Support */
 421 #define CONFIG_OF_BOARD_SETUP
 422 #define CONFIG_OF_LIBFDT
 423 #define CONFIG_FDT_FIXUP_PARTITIONS
 424
 425 #ifndef CONFIG_SYS_DCACHE_OFF
 426   #define CONFIG_CMD_CACHE
 427 #endif
 428
 429 #endif                         /* __CONFIG_H */